Cisco IOS XR IP Addresses and Services Command Reference, Release 3.4
LPTS Commands on Cisco IOS XR Software
Download this chapter
LPTS Commands on Cisco IOS XR SoftwareLPTS Commands on Cisco IOS XR Software
Download the complete book
Book-level PDF: Cisco IOS XR IP Addresses and Services Command ReferenceBook-level PDF: Cisco IOS XR IP Addresses and Services Command Reference (PDF - 7 MB)
give_us_feedback

Table Of Contents

LPTS Commands on Cisco IOS XR Software

clear lpts ifib statistics

clear lpts pifib statistics

show lpts bindings

show lpts clients

show lpts flows

show lpts ifib

show lpts ifib slices

show lpts ifib statistics

show lpts ifib times

show lpts mpa groups

show lpts pifib

show lpts pifib hardware entry

show lpts pifib hardware usage

show lpts pifib statistics

show lpts port-arbitrator

show lpts vrf


LPTS Commands on Cisco IOS XR Software

This chapter describes the Cisco IOS XR commands used to monitor Local Packet Transport Services (LPTS).

clear lpts ifib statistics

To clear the Internal Forwarding Information Base (IFIB) statistics, use the clear lpts ifib statistics command in EXEC mode.

clear lpts ifib statistics [location node-id]

Syntax Description

location node-id

(Optional) Clears the IFIB statistics for the designated node. The node-id argument is entered in standard rack/slot/module notation.


Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

This command was supported on the Cisco XR 12000 Series Router.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

If you do not specify a node with the location keyword and node-id argument, this command clears the IFIB statistics for the node on which the command is run.

Task ID

Task ID
Operations

lpts

execute


Examples

The following example shows how to clear the IFIB statistics for the RP: 

RP/0/RP0/CPU0:router# clear lpts ifib statistics

Related Commands

Command
Description

show lpts ifib statistics

Displays the LPTS IFIB statistics.


clear lpts pifib statistics

To clear the Pre-Internal Forwarding Information Base (Pre-IFIB) statistics, use the clear lpts pifib statistics command in EXEC mode.

clear lpts pifib statistics [location node-id]

Syntax Description

location node-id

(Optional) Clears the Pre-IFIB statistics for the designated node. The node-id argument is entered in the rack/slot/module notation.


Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

This command was supported on the Cisco XR 12000 Series Router.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

If you do not specify a node with the location keyword and node-id argument, this command clears the Pre-IFIB statistics for the node on which the command is run.

Task ID

Task ID
Operations

lpts

execute


Examples

The following example shows how to clear the Pre-IFIB statistics for the RP: 

RP/0/RP0/CPU0:router# clear lpts pifib statistics

Related Commands

Command
Description

show lpts pifib statistics

Displays the LPTS PIFIB statistics.


show lpts bindings

To display the binding information in the Port Arbitrator, use the show lpts bindings command in EXEC mode.

show lpts bindings [location node-id] [client-id {clnl | ipsec | ipv4-io | ipv6-io | mpa | tcp | test | udp | raw}] [brief]

Syntax Description

location node-id

(Optional) Displays information for the specified node. The node-id argument is entered in the rack/slot/module notation.

client-id

(Optional) Type of client. It can be one of the following values:

•clnl—ISO connectionless protocol (used by IS-IS)

•ipsec—Secure IP

•ipv4-io—Traffic processed by the IPv4 stack

•ipv6-io—Traffic processed by the IPv6 stack

•mpa—Multicast Port Arbitrator (multicast group joins)

•tcp—Transmission Control Protocol

•test—Test applications

•udp—User Datagram Protocol

•raw—Raw IP

brief

(Optional) Displays summary output.


Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

This command was supported on the Cisco XR 12000 Series Router.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

The show lpts bindings command displays the Local Packet Transport Services (LPTS) bindings (requests to receive traffic of a particular type). Bindings are aggregated into flows by the LPTS Port Arbitrator; flows are then programmed into the Internal Forwarding Information Base (IFIB) and Pre-IFIB to direct packets to applications.

If you specify the optional client-id keyword and type of client, only bindings from that client are shown. If you specify the optional location keyword and node-id argument, only bindings from clients on that node are displayed.

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output from the show lpts bindings command, displaying bindings for all client ID types: 

RP/0/RP0/CPU0:router# show lpts bindings


@ - Indirect binding; Sc - Scope


------------------------------------------

Location   :0/1/CPU0

Client ID  :IPV4_IO

Cookie     :0x00000001

Clnt Flags :

Layer 3    :IPV4

Layer 4    :ICMP

Local Addr :any

Remote Addr:any

Local Port :any

Remote Port:any

Filters    :Type / Intf or Pkt Type / Source Addr / Location

 INCLUDE_TYPE / type 8

 INCLUDE_TYPE / type 13

 INCLUDE_TYPE / type 17

------------------------------------------

Location   :0/2/CPU0

Client ID  :IPV4_IO

Cookie     :0x00000001

Clnt Flags :

Layer 3    :IPV4

Layer 4    :ICMP

Local Addr :any

Remote Addr:any

Local Port :any

Remote Port:any

Filters    :Type / Intf or Pkt Type / Source Addr / Location

 INCLUDE_TYPE / type 8

 INCLUDE_TYPE / type 13

 INCLUDE_TYPE / type 17

------------------------------------------

Location   :0/RP1/CPU0

Client ID  :TCP

Cookie     :0x4826f1f8

Clnt Flags :REUSEPORT

Layer 3    :IPV4

Layer 4    :TCP

Local Addr :any

Remote Addr:any

Local Port :7

Remote Port:any

------------------------------------------

Location   :0/RP1/CPU0

Client ID  :TCP

Cookie     :0x4826fa0c

Clnt Flags :REUSEPORT

Layer 3    :IPV4

Layer 4    :TCP

Local Addr :any

Remote Addr:any

Local Port :9

Remote Port:any

------------------------------------------

Location   :0/RP1/CPU0

Client ID  :TCP

Cookie     :0x482700d0

Clnt Flags :REUSEPORT

Layer 3    :IPV4

Layer 4    :TCP

Local Addr :any

Remote Addr:any

Local Port :19

Remote Port:any

------------------------------------------

Location   :0/RP1/CPU0

Client ID  :IPV4_IO

Cookie     :0x00000001

Clnt Flags :

Layer 3    :IPV4

Layer 4    :ICMP

Local Addr :any

Remote Addr:any

Local Port :any

Remote Port:any

Filters    :Type / Intf or Pkt Type / Source Addr / Location

 INCLUDE_TYPE / type 8

 INCLUDE_TYPE / type 13

 INCLUDE_TYPE / type 17

Table 43 describes the significant fields shown in the display.

Table 43 show lpts bindings Field Descriptions

Field
Description

Location

Node location, in the format of rack/slot/module.

Client ID

LPTS client type.

Cookie

Client's unique tag for the binding.

Clnt Flags

REUSEPORT -- client has set the SO_REUSEPORT or SO_REUSEADDR socket option.

Layer 3

Layer 3 protocol (IPv4, IPv6, CLNL).

Layer 4

Layer 4 protocol (TCP, UDP).

Local Addr

Local (destination) address.

Remote Addr

Remote (source) address.

Local Port

Local (destination) TCP or UDP port, or ICMP/IGMP packet type, or IPsec SPI.

Remote Port

Remote (source) TCP or UDP port.


The following is sample output from the show lpts bindings brief command: 

RP/0/RP0/CPU0:router# show lpts bindings brief


@ - Indirect binding; Sc - Scope


 Location   Clnt Sc L3   L4    VRF-ID   Local,Remote Address.Port  Interface

 ---------- ---- -- ---- ----- -------- -------------------------- ------------

 0/1/CPU0   IPV4 LO IPV4 ICMP  *        any.ECHO any               any         

 0/1/CPU0   IPV4 LO IPV4 ICMP  *        any.TSTAMP any             any         

 0/1/CPU0   IPV4 LO IPV4 ICMP  *        any.MASKREQ any            any         

 0/1/CPU0   IPV6 LO IPV6 ICMP6 *        any.ECHOREQ any            any         

 0/3/CPU0   IPV4 LO IPV4 ICMP  *        any.ECHO any               any         

 0/3/CPU0   IPV4 LO IPV4 ICMP  *        any.TSTAMP any             any

Table 44 describes the significant fields shown in the display.

Table 44 show lpts bindings brief Field Descriptions

Field
Description

Location

Node location, in the format of rack/slot/module.

Clnt ID

LPTS client type.

Sc

Scope (LR = Logical-Router, LO = Local).

Layer 3

Layer 3 protocol.

Layer 4

Layer 4 protocol.

VRF-ID

VPN routing and forwarding (VRF) identification (vrfid) number.

Local,Remote Address.Port

Local (destination) and Remote (source) addresses and ports or packet types.

Interface

Inbound interface.


Related Commands

Command
Description

show lpts clients

Displays the client information for the Port Arbitrator.

show lpts flows

Displays information about LPTS flows.


show lpts clients

To display the client information for the Port Arbitrator, use the show lpts clients command in EXEC mode.

show lpts clients [times]

Syntax Description

times

(Optional) Displays information about binding request rates and service times.


Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

This command was supported on the Cisco XR 12000 Series Router.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

The show lpts clients command displays the clients connected to the local packet transport services (LPTS) port arbitrator (PA).

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output from the show lpts clients command: 

RP/0/RP0/CPU0:router# show lpts clients


o_flgs - open flags ; clid - client id

clid            loc             flags   o_flgs

RAW(3)          0/RP1/CPU0      0x1     0x2

TCP(1)          0/RP1/CPU0      0x1     0x2

IPV4_IO(5)      0/1/CPU0        0x3     0x2

IPV4_IO(5)      0/2/CPU0        0x3     0x2

IPV4_IO(5)      0/RP1/CPU0      0x3     0x2

MPA(7)          0/RP1/CPU0      0x3     0x0

Table 45 describes the significant fields shown in the display.

Table 45 show lpts clients Field Descriptions

Field
Description

Clid

LPTS client ID.

Loc

Node location, in the format rack/slot/module.

Flags

Client flags.

o_flags

Open flags.


The following is sample output from the show lpts clients times command. The output shows samples for the last 30 seconds, 1 minute, 5 minutes, 10 minutes, and a total (if nonzero). The number of transactions, number of updates, and the minimum/average/maximum time in milliseconds to process each transaction is shown. 

RP/0/RP0/CPU0:router# show lpts clients times


o_flgs - open flags ; clid - client id

clid            loc     flags   o_flgs

RAW(3)          0/RP1/CPU0      0x1     0x2

   30s:2 tx 2 upd 2/2/3ms/tx

    1m:2 tx 2 upd 2/2/3ms/tx

    5m:2 tx 2 upd 2/2/3ms/tx

   10m:2 tx 2 upd 2/2/3ms/tx

 total:2 tx 2 upd 2/-/3ms/tx

TCP(1)          0/RP1/CPU0      0x1     0x2

 total:3 tx 3 upd 1/-/1ms/tx

IPV4_IO(5)      0/1/CPU0        0x3     0x2

 total:1 tx 1 upd 0/-/0ms/tx

IPV4_IO(5)      0/2/CPU0        0x3     0x2

 total:1 tx 1 upd 1/-/1ms/tx

IPV4_IO(5)      0/RP1/CPU0      0x3     0x2

 total:1 tx 1 upd 3/-/3ms/tx

MPA(7)          0/RP1/CPU0      0x3     0x0

Related Commands

Command
Description

show lpts bindings

Displays the binding information in the port arbitrator.

show lpts flows

Displays information about LPTS flows.


show lpts flows

To display information about Local Packet Transport Services (LPTS) flows, use the show lpts flows command in EXEC mode.

show lpts flows [brief]

Syntax Description

brief

(Optional) Displays summary output.


Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

This command was supported on the Cisco XR 12000 Series Router.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

The show lpts flows command is used to display LPTS flows, which are aggregations of identical binding requests from multiple clients and are used to program the LPTS Internal Forwarding Information Base (IFIB) and Pre-IFIB.

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output from the show lpts flows command: 

RP/0/RP0/CPU0:router# show lpts flows


------------------------------------------

L3-proto    : IPV4(2)

L4-proto    : ICMP(1)

VRF-ID      : * (000000000)

Local-IP    : any

Remote-IP   : any

Pkt-Type    : 8

Remote-Port : any

Interface   : any (0x0)

Flow-type   : ICMP-local

Min-TTL     : 0

Slice       : RAWIP4_FM

Flags       : 0x20 (in Pre-IFIB)

Location    : (drop)

Element References

location / count / scope

* / 3 / LOCAL

Table 46 describes the significant fields shown in the display.

Table 46 show lpts flows Field Descriptions

Field
Description

L3-proto

Layer 3 protocol (IPv4, IPv6, CLNL).

L4-proto

Layer 4 protocol (TCP, UDP, and so on.).

VRF-ID

VPN routing and forwarding (VRF) identification (vrfid) number.

Local-IP

Local (destination) IP address.

Remote-IP

Remote (source) IP address.

Pkt-Type

ICMP or IGMP packet type.

Remote-Port

Remote (source) TCP or UDP port.

Interface

Ingress interface.

Flow-type

Flow classification for hardware packet policing.

Min-TTL

Minimum time-to-live value expected from in the incoming packet. Ant packet received with a lower TTL value will be dropped.

Slice

IFIB slice.

Flags

•Has FGID: delivered to multiple destinations

•No IFIB entry: IFIB entry suppressed

•Retrying FGID allocation

•In Pre-IFIB: entry is in Pre-IFIB as well

•Deliver to one: if multiple bindings, will deliver to only one

Location

rack/slot/module to deliver to

Element References

•location: rack/slot/module of client

•count: number of clients at that location

•scope: binding scope (LR:Logical Router, LOCAL:Local)


The following is sample output from the show lpts flows brief command: 

RP/0/RP0/CPU0:router# show lpts flows brief


+ - Additional delivery destination; L - Local interest; P - In Pre-IFIB


 L3   L4    VRF-ID   Local, Remote Address.Port      Interface    Location    LP

 ---- ----- -------- ------------------------------- ------------ ----------- --

 IPV4 ICMP  *        any.ECHO any                    any          (drop)      LP

 IPV4 ICMP  *        any.TSTAMP any                  any          (drop)      LP

 IPV4 ICMP  *        any.MASKREQ any                 any          (drop)      LP

 IPV6 ICMP6 *        any.ECHOREQ any                 any          (drop)      LP

 IPV4 any   default  224.0.0.2 any                   Gi0/1/0/1    0/5/CPU0     P

Table 47 describes the significant fields shown in the display.

Table 47 show lpts flows brief Field Descriptions

Field
Description

L3

Layer 3 protocol (IPv4, IPv6, CLNL).

L4

Layer 4 protocol.

VRF-ID

VPN routing and forwarding (VRF) identification (vrfid) number.

Local, Remote Address.Port

Local (destination) and remote (source) IP addresses and TCP or UDP ports, or ICMP/IGMP packet types, or IPSec Security Parameters Indices.

Interface

Ingress interface.

Location

Delivery location:

•rack/slot/module—individual location

•[0xNNNNN]—multiple locations (platform-dependent value)

•(drop)—do not deliver to any application

LP

Local interest (to be processed by IPv4 or IPv6 stack directly) or entry is resident in Pre-IFIB.


Related Commands

Command
Description

show lpts bindings

Displays the binding information in the port arbitrator.

show lpts clients

Displays the client information for the port arbitrator.


show lpts ifib

To display the entries in the Internal Forwarding Information Base (IFIB), use the show lpts ifib command in EXEC mode.

show lpts ifib [entry] [type {bgp4 | bgp6 | isis | mcast4 | mcast6 | ospf-mc4 | ospf-mc6 | ospf4 | ospf6 | raw4 | raw6 | tcp4 | tcp6 | udp4 | udp6} | all] [brief [statistics]]

Syntax Description

entry

(Optional) Displays IFIB entries.

type

(Optional) Enter protocol types.

•bgp4—IPv4 Border Gateway Protocol (BGP) slice

•bgp6—IPv6 BGP slice

•isis—Intermediate System-to-Intermediate System (IS-IS) slice

•mcast4—IPv4 multicast slice

•mcast6—IPv6 multicast slice

•ospf-mc4—IPv4 Open Shortest Path First (OSPF) multicast slice

•ospf-mc6—IPv6 OSPF multicast slice

•ospf4—IPv4 OSPF slice

•ospf6—IPv6 OSPF slice

•raw4—IPv4 raw IP

•raw6—IPv6 raw IP

•tcp4—IPv4 Transmission Control Protocol (TCP) slice

•tcp6—IPv6 TCP slice

•udp4—IPv4 UDP slice

•udp6—IPv6 UDP slice

all

All IFIB types.

brief

(Optional) IFIB entries in brief format.

statistics

(Optional) IFIB table with statistics information.


Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

This command was supported on the Cisco XR 12000 Series Router.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Use this command to display detailed information about the entries in an IFIB slice. This command is useful for debugging problems with delivering packets to applications.

When the statistics keyword is used, detailed statistics are displayed for packet count, number of entries in each slice, and a total entries count.

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output from the show lpts ifib command: 

RP/0/RP1/CPU0:router# show lpts ifib


O - Opcode; A - Accept Counter; D - Drop Counter; F - Flow Type; L - Listener Tag;  
I - Local Flag; Y - SYN; T - Min TTL; DV - Deliver; DP - Drop; RE - Reassemble; na - Not 
Applicable

----------------------------------------------------

VRF-ID           : default (0x60000000)

Port/Type        : any

Source Port      : any

Dest IP          : any

Source IP        : any

Layer 4          : 88 (88)

Interface        : any (0x0)

O/A/D/F/L/I/Y/T  : DELIVER/0/0/EIGRP/IPv4_STACK/0/0/0

Deliver List     : 0/5/CPU0

----------------------------------------------------

Table 48 describes the significant fields shown in the display.

Table 48 show lpts ifib entries Field Descriptions 

Field
Description

VRF-ID

VPN routing and forwarding (VRF) identification (vrfid) number.

Port/Type

Destination (local) TCP or UDP port number, or ICMP/IGMP packet type, or IPSec Security Parameters Index.t2222

Source Port

Source (remote) TCP or UDP port.

Dest IP

Destination (local) IP address.

Source IP

Source (remote) IP address.

Layer 4

Layer 4 protocol number (6 = TCP)

Interface

Ingress interface name.

O/S/P/R/L/I/Y

•O: Opcode (DELIVER, DROP, or REASSEMBLE

•S: Stats counter

•P: Packet forwarding priority (LO, MED, or HIGH)

•R: Rate limit (LO, MED, or HIGH)

•L: Listener tag (IPv4_STACK, IPv6_STACK, or CLNL_STACK)

•I: Local-interest flag (0 or 1)

•Y: TCP SYN flag (0 or 1)

Deliver List

•(drop)—Drop packet

•rack/slot/module—Deliver to single destination

•[0xNNNN]—Deliver to multiple destinations (platform-dependent format)


The following is sample output from the show lpts ifib brief command: 

RP/0/RP0/CPU0:router# show lpts ifib brief


 Slice    Local, Remote Address.Port            L4    Interface    Dlvr

 -------- ------------------------------------- ----- ------------ -----------

 TCP4     any.7 any                             TCP   any          0/RP1/CPU0

 TCP4     any.9 any                             TCP   any          0/RP1/CPU0

The following is sample output from the show lpts ifib brief statistics command: 

RP/0/RP0/CPU0:router# show lpts ifib brief statistics


 Slice    Local, Remote Address.Port            L4    Interface    Accept/Drop

 -------- ------------------------------------- ----- ------------ -----------

 TCP4     any.7 any                             TCP   any          0/0

 TCP4     any.9 any                             TCP   any          0/0

 TCP4     any.19 any                            TCP   any          0/0


 Slice    Num. Entries Accepts/Drops

 -------- ------------ -------------

TCP4     3            0/0

Total    3            0/0

Related Commands

Command
Description

show lpts ifib slices

Displays IFIB slice information.


show lpts ifib slices

To display Internal Forwarding Information Base (IFIB) slice information, use the show lpts ifib slices command in EXEC mode.

show lpts ifib slices [type {bgp4 | bgp6 | isis | mcast4 | mcast6 | ospf-mc4 | ospf-mc6 | ospf4 | ospf6 | raw4 | raw6 | tcp4 | tcp6 | udp4 | udp6}] [all] [statistics] [times]

Syntax Description

type

(Optional) Enter protocol types.

•bgp4—IPv4 Border Gateway Protocol (BGP) slice

•bgp6—IPv6 BGP slice

•isis—Intermediate System-to-Intermediate System (IS-IS) slice

•mcast4—IPv4 multicast slice

•mcast6—IPv6 multicast slice

•ospf-mc4—IPv4 Open Shortest Path First (OSPF) multicast slice

•ospf-mc6—IPv6 OSPF multicast slice

•ospf4—IPv4 OSPF slice

•ospf6—IPv6 OSPF slice

•raw4—IPv4 raw IP

•raw6—IPv6 raw IP

•tcp4—IPv4 Transmission Control Protocol (TCP) slice

•tcp6—IPv6 TCP slice

•udp4—IPv4 UDP slice

•udp6—IPv6 UDP slice

all

(Optional) All entries.

statistics

(Optional) Statistics for slice lookups.

times

(Optional) IFIB update transaction times.


Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

This command was supported on the Cisco XR 12000 Series Router.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Use the show lpts ifib slices command when troubleshooting IFIB entries and slice assignments. This command is especially useful when troubleshooting problems with delivering packets to applications.

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output from the show lpts ifib slices command: 

RP/0/RP0/CPU0:router# show lpts ifib slices 


Slice    L3   L4     Port  Location

-------- ---- ------ ----- --------

RAWIP4   IPV4 any    any   0/RP1/CPU0

RAWIP6   IPV6 any    any   0/RP1/CPU0

OSPF4    IPV4 OSPF   any   0/RP1/CPU0

OSPF6    IPV6 OSPF   any   0/RP1/CPU0

OSPF_MC4 IPV4 any    any   0/RP1/CPU0

OSPF_MC6 IPV6 any    any   0/RP1/CPU0

BGP4     IPV4 TCP    179   0/RP1/CPU0

BGP6     IPV6 TCP    179   0/RP1/CPU0

UDP4     IPV4 UDP    any   0/RP1/CPU0

UDP6     IPV6 UDP    any   0/RP1/CPU0

TCP4     IPV4 TCP    any   0/RP1/CPU0

TCP6     IPV6 TCP    any   0/RP1/CPU0

ISIS     CLNS -      any   0/RP1/CPU0

MCAST4   IPV4 any    any   0/RP1/CPU0

MCAST6   IPV6 any    any   0/RP1/CPU0

The following is sample output from the show lpts ifib slices times command: 

RP/0/RP0/CPU0:router# show lpts ifib slices times


Slice    L3   L4     Port  Location

-------- ---- ------ ----- --------

RAWIP4   IPV4 any    any   0/RP1/CPU0

RAWIP6   IPV6 any    any   0/RP1/CPU0

OSPF4    IPV4 OSPF   any   0/RP1/CPU0

OSPF6    IPV6 OSPF   any   0/RP1/CPU0

OSPF_MC4 IPV4 any    any   0/RP1/CPU0

OSPF_MC6 IPV6 any    any   0/RP1/CPU0

BGP4     IPV4 TCP    179   0/RP1/CPU0

BGP6     IPV6 TCP    179   0/RP1/CPU0

UDP4     IPV4 UDP    any   0/RP1/CPU0

UDP6     IPV6 UDP    any   0/RP1/CPU0

TCP4     IPV4 TCP    any   0/RP1/CPU0

TCP6     IPV6 TCP    any   0/RP1/CPU0

ISIS     CLNS -      any   0/RP1/CPU0

MCAST4   IPV4 any    any   0/RP1/CPU0

MCAST6   IPV6 any    any   0/RP1/CPU0

  Flow Manager 0/RP1/CPU0:

   total:5 tx 13 upd 1/-/1ms/tx

The following is sample output from the show lpts ifib slices statistics command. 

RP/0/RP0/CPU0:router# show lpts ifib slices all statistics


Slice    L3   L4     Port  Location   Lookups RmtDlvr Rejects RLDrops NoEntry

-------- ---- ------ ----- ---------- ------- ------- ------- ------- -------

RAWIP4   IPV4 any    any   0/0/CPU0   5       0       0       0       0

RAWIP6   IPV6 any    any   0/0/CPU0   0       0       0       0       0

OSPF4    IPV4 OSPF   any   0/0/CPU0   0       0       0       0       0

OSPF6    IPV6 OSPF   any   0/0/CPU0   0       0       0       0       0

OSPF_MC4 IPV4 any    any   0/0/CPU0   0       0       0       0       0

OSPF_MC6 IPV6 any    any   0/0/CPU0   0       0       0       0       0

BGP4     IPV4 TCP    179   0/0/CPU0   0       0       0       0       0

BGP6     IPV6 TCP    179   0/0/CPU0   0       0       0       0       0

UDP4     IPV4 UDP    any   0/0/CPU0   3704    0       979     0       0

UDP6     IPV6 UDP    any   0/0/CPU0   0       0       0       0       0

TCP4     IPV4 TCP    any   0/0/CPU0   0       0       0       0       0

TCP6     IPV6 TCP    any   0/0/CPU0   0       0       0       0       0

ISIS     CLNS -      any   0/0/CPU0   0       0       0       0       0

MCAST4   IPV4 any    any   0/0/CPU0   0       0       0       0       0

MCAST6   IPV6 any    any   0/0/CPU0   0       0       0       0       0

  Flow Manager 0/0/CPU0:

   Packets in: 3792

   Packets delivered locally without lookups: 83

   Slice lookups: 3709

     Rejects: 979

Table 49 describes the significant fields shown in the display.

Table 49 show lpts ifib slices statistics Field Descriptions

Field
Description

Slice

Slice number.

L3-proto

Layer 3 protocol (IPv4, IPv6, CLNL).

L4-proto

Layer 4 protocol (TCP, UDP, and others).

Port

Local (destination) TCP or UDP port.

Location

Node location, in the format rack/slot/module.


Related Commands

Command
Description

show lpts ifib

Displays entries in the IFIB.


show lpts ifib statistics

To display Internal Forwarding Information Base (IFIB) statistics, use the show lpts ifib statistics command in EXEC mode.

show lpts ifib statistics [location node-id]

Syntax Description

location node-id

(Optional) Displays IFIB statistics for the designated node. The node-id argument is entered in the rack/slot/module notation.


Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

This command was supported on the Cisco XR 12000 Series Router.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output from the show lpts ifib statistics command: 

RP/0/RP0/CPU0:router# show lpts ifib statistics


Flow Manager 0/RP1/CPU0:

   Packets in:254

   Packets delivered locally without lookups:0

   Slice lookups:254

     Post-lookup error drops:

      Failed ipv4_netio_input:1

     Rejects:254

    Packets delivered locally:0

    Packets delivered remotely:0

Table 50 describes the significant fields shown in the display.

Table 50 show lpts ifib statistics Field Descriptions 

Field
Description

Packets in

Packets presented to the LPTS decaps node in netio.

Packets delivered locally without lookups

Packets previously resolved on a LC delivered directly to L3.

Slice lookups

Packets requiring slice lookups.

Post-lookup error drops

Packets dropped after a slice lookup.

Rejects

Packets that caused a TCP RST or ICMP Port/Protocol Unreachable.

Packets delivered locally

Packets delivered to local applications after slice lookups.

Packets delivered remotely

Packets delivered to applications on remote RPs.


Note The sample output is an example only and displays only those fields showing a value. No display exists for nonzero values. This command may show other values depending on your router configuration.

Related Commands

Command
Description

show lpts ifib

Displays the entries in an IFIB slice.


show lpts ifib times

To display Internal Forwarding Information Base (IFIB) update transaction times, use the show lpts ifib times command in EXEC mode.

show lpts ifib times [location node-id]

Syntax Description

location node-id

(Optional) Displays IFIB update transaction times for the designated node. The node-id argument is entered in the rack/slot/module notation.


Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

This command was supported on the Cisco XR 12000 Series Router.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output from the show lpts ifib times command: 

RP/0/RP0/CPU0:router# show lpts ifib times


Slice    L3   L4     Port  Location

-------- ---- ------ ----- --------

RAWIP4   IPV4 any    any   0/RP1/CPU0

RAWIP6   IPV6 any    any   0/RP1/CPU0

OSPF4    IPV4 OSPF   any   0/RP1/CPU0

OSPF6    IPV6 OSPF   any   0/RP1/CPU0

OSPF_MC4 IPV4 any    any   0/RP1/CPU0

OSPF_MC6 IPV6 any    any   0/RP1/CPU0

BGP4     IPV4 TCP    179   0/RP1/CPU0

BGP6     IPV6 TCP    179   0/RP1/CPU0

UDP4     IPV4 UDP    any   0/RP1/CPU0

UDP6     IPV6 UDP    any   0/RP1/CPU0

TCP4     IPV4 TCP    any   0/RP1/CPU0

TCP6     IPV6 TCP    any   0/RP1/CPU0

ISIS     CLNS -      any   0/RP1/CPU0

MCAST4   IPV4 any    any   0/RP1/CPU0

MCAST6   IPV6 any    any   0/RP1/CPU0

Flow Manager 0/RP1/CPU0:

 total:5 tx 13 upd 1/-/1ms/tx

Table 51 describes the significant fields shown in the display.

Table 51 show lpts ifib times Field Descriptions

Field
Description

Slice

Slice number.

L3 Protocol

Layer 3 protocol (IPv4, IPV6, CLNL).

L4 Protocol

Layer 4 protocol (TCP, UDP, and so on).

Port

Local (destination) TCP or UDP port.

Location

Node location, in the format rack/slot/module.


Related Commands

Command
Description

show lpts ifib

Displays detailed information about entries in an IFIB slice.


show lpts mpa groups

To display aggregate information about multicast bindings for groups, use the show lpts mpa groups command in EXEC mode.

show lpts mpa groups interface type instance

Syntax Description

type

Interface type. For more information, use the question mark (?) online help function.

instance

Either a physical interface instance or a virtual interface instance as follows:

•Physical interface instance. Naming notation is rack/slot/module/port and a slash between values is required as part of the notation.

–rack: Chassis number of the rack.

–slot: Physical slot number of the modular services card or line card.

–module: Module number. A physical layer interface module (PLIM) is always 0.

–port: Physical port number of the interface.

Note In references to a Management Ethernet interface located on a route processor card, the physical slot number is alphanumeric (RP0 or RP1) and the module is CPU0.
Example: interface MgmtEth0/RP1/CPU0/0.

•Virtual interface instance. Number range varies depending on interface type.

For more information about the syntax for the router, use the question mark (?) online help function.


Defaults

No default behavior or values

Command Types

EXEC

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

This command was supported on the Cisco XR 12000 Series Router.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

The show lpts mpa groups command is used to aggregate information about the multicast groups joined on a specified interface. This command also displays the filter mode and source list associated with the groups joined on a specified interface.

Task ID

Task ID
Operations

lpts

read

network

read


Examples

The following is sample output from the show lpts mpa groups command: 

RP/0/RP0/CPU0:router# show lpts mpa groups POS 0/0/0/0 


  224.0.0.2 : includes 0, excludes 1, mode EXCLUDE

    <no source filter>

  224.0.0.13 : includes 0, excludes 1, mode EXCLUDE

    <no source filter>

  224.0.0.22 : includes 0, excludes 1, mode EXCLUDE

    <no source filter>

Table 52 describes the significant fields shown in the display.

Table 52 show lpts mpa groups Field Descriptions

Field
Description

Includes

Displays the number of sockets that have set up an INCLUDE mode filter for that group and if there are any source-specific filters.

Excludes

Displays the number of sockets that have set up an EXCLUDE mode filter for that group and if there are any source-specific filters.


show lpts pifib

To display Pre-Internal Forwarding Information Base (Pre-IFIB) entries, use the show lpts pifib command in EXEC mode.

show lpts pifib [entry] [type {isis | ipv4 {frag | ixmp | mcast | tcp | udp | ipsec | raw} | ipv6 {frag | icmp | ixmp | mcast | tcp | udp | ipsec | raw } | all}] [brief [statistics] [location node-id]

Syntax Description

entry

(Optional) Pre-IFIB entry.

type

(Optional) Protocol type.

isis

Intermediate System-to-Intermediate System (IS-IS) sub Pre-IFIB type.

ipv4

IPv4 sub Pre-IFIB type. Possible values include frag, ixmp, mcast, tcp, udp, ipsec, and raw.

ipv6

IPv6 sub Pre-IFIB type. Possible values include frag, icmp, ixmp, mcast, tcp, udp, ipsec, and raw.

frag

IPv4 or IPv6 fragment.

icmp

IPv4 or IPv6 IXMP and Internet Group Management Protocol (IGMP).

ixmp

IPv4 or IPv6 IXMP (ICMP and Internet Group Management Protocol [IGMP]).

mcast

IPv4 or IPv6 Multicast.

tcp

IPv4 or IPv6 Transmission Control Protocol (TCP).

udp

IPv4 or IPv6 User Datagram Protocol (UDP).

ipsec

Secure IP.

raw

IPv4 orIPv6 raw IP.

all

All sub Pre-IFIBs.

brief

(Optional) Pre-IFIB entries in brief format.

statistics

(Optional) Pre-IFIB table with statistics information.

location node-id

(Optional) The node-id argument is entered in the rack/slot/module notation (for example, 0/7/CPU0).


Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

This command was supported on the Cisco XR 12000 Series Router.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Use the show lpts pifib brief command to display entries of all or part of a Pre-IFIB.

Use the show lpts pifib brief command to display a short description of each entry in the LPTS Pre-IFIB, optionally displaying packet counts for each entry. Note that these statistics are only for packets processed by a line card, route processor, or distributed route processor. Pre-IFIB statistics for packets processed by line card hardware are counted separately.

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output for the show lpts pifib command: 

RP/0/RP0/CPU0:router# show lpts pifib 


O - Opcode; F - Flow Type; L - Listener Tag; I - Local Flag; T - Min TTL;

na - Not Applicable

----------------------------------------------------

L3 Protocol       : CLNS

L4 Protocol       : -

VRF-ID            : default (0x60000000)

Destination IP    : any

Source IP         : any

Port/Type         : any

Source Port       : any

Is Fragment       : 0

Is SYN            : 0

Interface         : any (0x0)

O/F/L/I/T         : DELIVER/ISIS-default/CLNS_STACK/0/0

Deliver List      : FGID 11935

Accepts/Drops     : 0/0

Is Stale          : 0

The following is sample output for the show lpts pifib type command using the ipv4 and tcp keywords. 

RP/0/RP0/CPU0:router# show lpts pifib type ipv4 tcp


O - Opcode; F - Flow Type; L - Listener Tag; I - Local Flag; T - Min TTL;

na - Not Applicable

----------------------------------------------------

L3 Protocol       : IPV4

L4 Protocol       : TCP

VRF-ID            : default (0x60000000)

Destination IP    : any

Source IP         : any

Port/Type         : Port:23

Source Port       : any

Is Fragment       : 0

Is SYN            : 0

Interface         : any (0x0)

O/F/L/I/T         : DELIVER/TELNET-default/IPv4_LISTENER/0/0

Deliver List      : 0/RP0/CPU0

Accepts/Drops     : 0/0

Is Stale          : 0

----------------------------------------------------

The following is sample output from the show lpts pifib entry brief command: 

RP/0/RP0/CPU0:router# show lpts pifib entry brief


* - Critical Flow; I - Local Interest;

X - Drop; R - Reassemble;


 Type       VRF-ID   Local, Remote Address.Port L4    Interface    Deliver

 ---------- -------- -------------------------- ----- ------------ -------------


 ISIS       *        - -                        -     any          0/0/CPU0

 IPv4_frag  *        any any                    any   any          R

 IPv4_IXMP  *        any.ECHO any               ICMP  any          XI

 IPv4_IXMP  *        any.TSTAMP any             ICMP  any          XI

 IPv4_IXMP  *        any.MASKREQ any            ICMP  any          XI

 IPv4_IXMP  *        any any                    ICMP  any          0/0/CPU0

 IPv4_IXMP  *        any any                    IGMP  any          0/0/CPU0

 IPv4_mcast *        224.0.0.5 any              any   any          0/0/CPU0

 IPv4_mcast *        224.0.0.6 any              any   any          0/0/CPU0

 IPv4_mcast *        224.0.0.0/4 any            any   any          0/0/CPU0


 IPv4_TCP   *        any.179 any                TCP   any          0/0/CPU0

 IPv4_TCP   *        any any.179                TCP   any          0/0/CPU0

 IPv4_TCP   *        any any                    TCP   any          0/0/CPU0

 IPv4_UDP   *        any any                    UDP   any          0/0/CPU0

 IPv4_IPsec *        any any                    ESP   any          0/0/CPU0

 IPv4_IPsec *        any any                    AH    any          0/0/CPU0

 IPv4_rawIP *        any any                    OSPF  any          0/0/CPU0

 IPv4_rawIP *        any any                    any   any          0/0/CPU0

 IPv6_frag  *        any any                    any   any          R

 IPv6_ICMP  *        any.na any                 ICMP6 any          XI

 IPv6_ICMP  *        any any                    ICMP6 any          0/0/CPU0

 IPv6_mcast *        ff02::5 any                any   any          0/0/CPU0

 IPv6_mcast *        ff02::6 any                any   any          0/0/CPU0

 IPv6_mcast *        ff00::/8 any               any   any          0/0/CPU0

 IPv6_TCP   *        any.179 any                TCP   any          0/0/CPU0

 IPv6_TCP   *        any any.179                TCP   any          0/0/CPU0

 IPv6_TCP   *        any any                    TCP   any          0/0/CPU0

 IPv6_UDP   *        any any                    UDP   any          0/0/CPU0

 IPv6_IPsec *        any any                    ESP   any          0/0/CPU0

 IPv6_IPsec *        any any                    AH    any          0/0/CPU0

 IPv6_rawIP *        any any                    OSPF  any          0/0/CPU0

 IPv6_rawIP *        any any                    any   any          0/0/CPU0

The following is sample output from the show lpts pifib entry brief statistics command: 

RP/0/RP0/CPU0:router# show lpts pifib entry brief statistics


* - Critical Flow; I - Local Interest;

X - Drop; R - Reassemble;


 Type       VRF-ID   Local, Remote Address.Port L4    Interface    Accepts/Drops


 ---------- -------- -------------------------- ----- ------------ -------------


 ISIS       *        - -                        -     any          0/0

 IPv4_frag  *        any any                    any   any          0/0

 IPv4_IXMP  *        any.ECHO any               ICMP  any          0/0

 IPv4_IXMP  *        any.TSTAMP any             ICMP  any          0/0

 IPv4_IXMP  *        any.MASKREQ any            ICMP  any          0/0

 IPv4_IXMP  *        any any                    ICMP  any          5/0

 IPv4_IXMP  *        any any                    IGMP  any          0/0

 IPv4_mcast *        224.0.0.5 any              any   any          0/0

 IPv4_mcast *        224.0.0.6 any              any   any          0/0

 IPv4_mcast *        224.0.0.0/4 any            any   any          0/0

 IPv4_TCP   *        any.179 any                TCP   any          0/0

 IPv4_TCP   *        any any.179                TCP   any          0/0

 IPv4_TCP   *        any any                    TCP   any          0/0

 IPv4_UDP   *        any any                    UDP   any          4152/0

 IPv4_IPsec *        any any                    ESP   any          0/0

 IPv4_IPsec *        any any                    AH    any          0/0

 IPv4_rawIP *        any any                    OSPF  any          0/0

------------------------ 

statistics:


Type            Num. Entries         Accepts/Drops


------          ------------         -------------

ISIS            1                    0/0

IPv4_frag       1                    0/0

IPv4_IXMP       5                    5/0

IPv4_mcast      3                    0/0

IPv4_TCP        3                    0/0

IPv4_UDP        1                    4175/0

IPv4_IPsec      2                    0/0

IPv4_rawIP      2                    0/0

IPv6_frag       1                    0/0

IPv6_ICMP       2                    0/0

IPv6_mcast      3                    0/0

IPv6_TCP        3                    0/0

IPv6_UDP        1                    0/0

IPv6_IPsec      2                    0/0

IPv6_rawIP      2                    0/0

Total           32


Packets into Pre-IFIB: 4263

Lookups: 4263

Packets delivered locally: 4263

Packets delivered remotely: 0

Table 53 describes the significant fields shown in the display for the show lpts pifib brief statistics command.

Table 53 show lpts pifib Field Descriptions 

Field
Description

Type

Hardware entry type.

VRF ID

VPN routing and forwarding (VRF) identification (vrfid) number.

Local, Remote Address. Port

Indicates local address (in the form of local port and type) and remote address (remote port).

L4

Layer 4 protocol of the entry.

Interface

Interface for this entry.

Accepts/Drops

Number of packets sent to DestAddr/Number of packets dropped due to policing.

Num. Entries

Number of pre-ifib entries of the listed type.

Packets into Pre-IFIB

Packets presented for pre-IFIB lookups.

Lookups

Packets looked up.

Packets delivered locally

Packets delivered to local applications or the local stack (n duplicated) packets duplicated for delivery to applications and the local stack.

Packets delivered remotely

Packets delivered to applications or for lookup on other RPs.


show lpts pifib hardware entry

To display entries in the Local Packet Transport Services (LPTS) pre-IFIB hardware table, use the show lpts pifib hardware entry command in EXEC mode.

show lpts pifib hardware entry [type {ipv4 | ipv6 | isis}] [start-index number num-entries number] [brief | statistics] [location node-id]

Syntax Description

type

(Optional) Specifies the hardware entry type. Enter one of the following types:

•ipv4—Specifies IPv4 entries.

•ipv6—Specifies IPv6 entries.

•isis—Specifies ISIS entries.

start-index number

(Optional) Starting index number.

num-entries number

(Optional) Maximum entries permitted.

brief

(Optional) Displays summary hardware entry information.

statistics

(Optional) Displays hardware entry accept/drop statistics for each summary entry.

location node-id

(Optional) Displays pre-Internal Forwarding Information Base (IFIB) information for the designated node. The node-id argument is entered in the rack/slot/module notation.


Defaults

Displays brief hardware entry information

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

No modification.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output from the show lpts pifib hardware entry command with the location keyword: 

RP/0/RP0/CPU0:router# show lpts pifib hardware entry location 0/1/CPU0


             Node: 0/1/CPU0:

----------------------------------------

V - Vital; M - Fabric Multicast;

C - Moose Congestion Flag; L - Listener Tag; T - Min TTL;

F - Flow Type;

DestNode - Destination Node;

DestAddr - Destination Fabric Address;

Sq - Ingress Shaping Queue; Dq - Destination Queue;

Po - Policer; Ct - Stats Counter;

Lp - Lookup priority; Sp - Storage Priority;

Ar - Average rate limit; Bu - Burst;

Rsp - Relative sorting position;

----------------------------------------------------

L4 Protocol       : any

VRF ID            : any

Source IP         : any

Port/Type         : any

Source Port       : any

Is Fragment       : 1

Is SYN            : any

Interface         : any

V/M/C/L/T/F       : 0/0/0/IPv4_REASS/0/Fragment

DestNode          : Local

DestAddr          : Punt

Sq/Dq/Ct          : 4/na/0x24400

Accepted/Dropped  : 0/0

Lp/Sp             : 0/0

# of TCAM entries : 1

Po/Ar/Bu          : 101/1000pps/100ms

State             : Entry in TCAM

Rsp/Rtp           : 0/0

----------------------------------------------------

Table 54 describes the significant fields shown in the display.

Table 54 show lpts pifib hardware entry Field Descriptions 

Field
Description

L4 Protocol

Layer 4 protocol of the entry.

VRF ID

VPN routing and forwarding (VRF) identification (vrfid) number.

Source IP

Source IP address for this entry.

Port/Type

Port or ICMP1 type for this entry.

Source Port

Source port for this entry.

Is Fragment

Indicates if this entry applies to IP fragments.

Is SYN

Indicates if this entry applies to TCP SYNs.

Interface

Interface for this entry.

V/M/C/L/T/F

•V—vital

•M—fabric multicast

•C—moose congestion flag

•L—listener tag

•T—minimum time-to-live

•F—flow type

DestNode

Destination node to which to send the packet.

DestAddr

Destination address to which to send the packet.

Sq/Dq/Ct

•Sq—Ingress Shaping Queue

•Dq—Destination Queue

•Ct—Stats Counter.

Accepted/Dropped

Number of packets sent to DestAddr/Number of packets dropped due to policing.


1. Internet Control Message Protocol

show lpts pifib hardware usage

To display hardware table usage, use the show lpts pifib hardware usage command in EXEC mode.

show lpts pifib hardware usage [type {ipv4 | ipv6 | isis}] [location node-id]

Syntax Description

type

(Optional) Specifies the hardware entry type. Enter one of the following types:

•ipv4—Specifies IPv4 entries.

•ipv6—Specifies IPv6 entries.

•isis—Specifies ISIS entries.

location node-id

(Optional) Displays pre-Internal Forwarding Information Base (IFIB) information for the designated node. The node-id argument is entered in the rack/slot/module notation.


Defaults

Without the optional parameters, the show lpts pifib hardware usage command displays a brief summary of hardware entry information

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

No modification.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output from the show lpts pifib hardware usage command with the location keyword: 

RP/0/RP0/CPU0:router# show lpts pifib hardware usage location 0/1/cpu0


Type       Size            Used            Used(%)

---------- --------------- --------------- -------

ipv4       6000            21              0.35

ipv6       4000            15              0.38

isis       4000            1               0.03

Table 55 describes the significant fields shown in the display.

Table 55 show lpts pifib hardware usage Field Descriptions 

Field
Description

Type

Type of pre-IFIB entry.

Size

Maximum number of entries (72-bits) allowed for the type.

Used

Number of entries in use.

Used(%)

Percentage of total entries in use.


show lpts pifib statistics

To display Pre-Internal Forwarding Information Base (Pre-IFIB) statistics, use the show lpts ifib statistics command in EXEC mode.

show lpts pifib statistics [location node-id]

Syntax Description

location node-id

(Optional) Displays Pre-IFIB statistics for the designated node. The node-id argument is entered in the rack/slot/module notation.


Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 2.0

This command was introduced on the Cisco CRS-1.

Release 3.0

No modification.

Release 3.2

This command was supported on the Cisco XR 12000 Series Router.

Release 3.3.0

No modification.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output from the show lpts pifib statistics command: 

RP/0/RP0/CPU0:router# show lpts pifib statistics


Packets into Pre-IFIB:80

Lookups:80

Packets delivered locally:80

Packets delivered remotely:0

Table 56 describes the significant fields shown in the display.

Table 56 show lpts pifib statistics Field Descriptions

Field
Description

Packets into Pre-IFIB

Packets presented for pre-IFIB lookups.

Lookups

Packets looked up.

Packets delivered locally

Packets delivered to local applications or the local stack (n duplicated) packets duplicated for delivery to applications and the local stack.

Packets delivered remotely

Packets delivered to applications or for lookup on other RPs.


Related Commands

Command
Description

show lpts pifib

Displays information about pre-IFIB entries.


show lpts port-arbitrator

To display local packet transport services (lpts) port arbitrator statistics, use the show lpts port-arbitrator command in EXEC mode.

show lpts port-arbitrator statistics

Syntax Description

This command has no arguments or keywords.

Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 3.3.0

This command was introduced on the Cisco CRS-1.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output from the show lpts port-arbitrator statistics command: 

RP/0/RP0/CPU0:router# show lpts port-arbitrator statistics


LPTS Port Arbitrator statistics:

 PA FGID-DB library statistics:

  0 FGIDs in use, 512 cached, 0 pending retries

  0 free allocation slots, 0 internal errors, 0 retry attempts

  1 FGID-DB notify callback, 0 FGID-DB errors returned

  FGID-DB permit mask: 0x7 (alloc mark rack0)

  PA API calls:

            1 init              1 realloc_done

            8 alloc             8 free

           16 join             16 leave

            8 detach

  FGID-DB API calls:

            1 register          1 clear_old

            1 alloc             0 free

           16 join             16 leave

            0 mark              1 mark_done

show lpts vrf

To display the lpts VPN router and forwarding (VRF) instance identification numbers and names, use the show lpts vrf command in EXEC mode.

show lpts vrf

Syntax Description

This command has no arguments or keywords.

Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release
Modification

Release 3.3.0

This command was introduced on the Cisco CRS-1.

Release 3.4.0

No modification.


Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Task ID

Task ID
Operations

lpts

read


Examples

The following is sample output from the show lpts vrf command: 


RP/0/RP0/CPU0:router# show lpts vrf


VRF-ID      VRF-NAME

0x00000000  *

0x60000000  default

Table 57 describes the significant fields shown in the display.

Table 57 show lpts vrf Field Descriptions

Field
Description

VRF-ID

VPN routing and forwarding (VRF) identification (vrfid) number.

VRF-NAME

Name given to the VRF.