Table Of Contents

Routing Messages

C12000_IPV4_MRIB Messages

V4_MULTICAST Messages

Routing Messages

---

This section contains all routing related System Error Messages, such as MPLS, OSPF, BGP, Multicast, MRIB, RIB, and so forth. The following facility codes are represented in this module:

•C12000_IPV4_MRIB Messages

•V4_MULTICAST Messages

C12000_IPV4_MRIB Messages

Error Message     

%ROUTING-C12000_IPV4_MRIB-3-INIT_ERROR Process initialization failed: ([chars]%s)

Explanation    MRIB (multicast routing information base) failed to initialize. MRIB is the central routing information base for multicast components. It provides coordination among all multicast routing components and forwarding. The effect is that multicast forwarding will not function. %s - indicates the reason for the failure.

Recommended Action    The System Manager process (sysmgr) will automatically respawn this process, up to a fixed number of times when this error is encountered, to recover. Execute 'show process mrib' to verify that the process is up and running. If it is still non-operational, try doing 'process restart mrib' If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

V4_MULTICAST Messages

Error Message     

%ROUTING-V4_MULTICAST-4-ANOMALY [chars]

Explanation    A SW exception occurred in V4_MULTICAST Library

Recommended Action    Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.