Cisco IOS XR System Error Reference Guide for XR1200 Series Platform Specific Messages, Release 3.3 - Operating System (OS) Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

Operating System (OS) Messages

GSP_NOTIF Messages

KD_MBUS Messages

QNET_LC Messages

QNET Messages

Operating System (OS) Messages

This section contains all Operating System(OS) and OS infrastructure related System Error Messages. The following facility codes are represented in this module:

•GSP_NOTIF Messages

•KD_MBUS Messages

•QNET_LC Messages

•QNET Messages

GSP_NOTIF Messages
Error Message     
%OS-GSP_NOTIF-3-msg_failed Failure to notify node state when [chars]: [chars]
Explanation The internal communication channel is broken.
Recommended Action Must restart the process.

KD_MBUS Messages
Error Message     
%OS-KD_MBUS-1-EVENT_MGR_CREATE_FAILED [chars]: can't create event manager. [chars]
Explanation Failed to create event manager for the process
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message     
%OS-KD_MBUS-1-FLASH_FULL No space in bootflash to write. Size of data: [dec], Data: [chars]
Explanation Bootflash is full
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message     
%OS-KD_MBUS-3-COMPRESS_INIT_FAILED Compress initialization failed. Probably low memory
Explanation Could not initalize data structure for compression
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message     
%OS-KD_MBUS-3-CORE_FILE_OPEN_FAILED Could not open [chars]. Error: [chars]
Explanation Open of file failed
Recommended Action Check if valid file location and filename
Error Message     
%OS-KD_MBUS-3-DEBUG_INIT_FAILED [chars]
Explanation Debug init failed
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-KD_MBUS-3-FAIL_DEBUG_REG [chars]: Can't connect to configuration, [chars]
Explanation DUMPER debugging service register to sysdb failed.
Recommended Action Check the existence of the Sysdb service. The system is supposed to re-register if the Sysdb service is available.
Error Message     
%OS-KD_MBUS-3-SYSDB_BIND_FAILURE Unable to bind to [chars]. Error: [chars]
Explanation Could not connect to sysdb
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message     
%OS-KD_MBUS-3-SYSDB_GET_FAILURE Unable to get item [chars]. Error: [chars]
Explanation Item possible not in sysdb
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message     
%OS-KD_MBUS-3-WRITE_FAILED Write of size [dec] to fd [dec] failed. Error: [chars]
Explanation Most probably some problem with the file system
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message     
%OS-KD_MBUS-4-SYSDB_SET_FAILURE Could not set [chars]. [chars]
Explanation Could not set sysdb item.
Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.'
Error Message     
%OS-KD_MBUS-6-CORE_DUMP_NOT_CONFIGURED Core dump failed since dump location not configured
Explanation Core dump location needs to be configured before dumping
Recommended Action Configure core dump location using exception kernel command

QNET_LC Messages
Error Message     
%OS-QNET_LC-7-BASE_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec])
Explanation qnetbase_builder_func() called with bad chain type.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-QNET_LC-7-BASE_CONTROL_FUNC_ERR [chars]:[dec]:[chars]: Base Control function erroneously called!
Explanation qnetbase_control_func() wrongly called.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-QNET_LC-7-CAPS_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec])
Explanation qnetcaps_builder_func() called with wrong chain type.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-QNET_LC-7-CAPS_CONTROL_FUNC_ERR [chars]:[dec]:[chars]: Caps Control function erroneously called!
Explanation qnetcaps_control_func() has been called, which should never happen.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-QNET_LC-7-DUPLICATE_BMA_PAK [chars]: Cannot duplicate BMA packet (rc=[dec] dropping Qnet packet.

Explanation pak_netio_duplicate() failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-QNET_LC-7-ENCAPS_FUNC_ERR [chars]:[dec]:[chars]: Qnet encapsulation node erroneously called!
Explanation qnetcaps_encaps() has been called, which should never happen.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-QNET_LC-7-LOST_QNET_CONN Lost connection to Qnet process; dropping packets.
Explanation netio_dll_packet_input_NEW() to Qnet failed and Qnet connection is closed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-QNET_LC-7-PAK_INPUT_FAIL [chars]:[dec]:[chars]: packet_input returned non-zero result code ([dec])
Explanation netio_dll_packet_input_NEW() to Qnet failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%OS-QNET_LC-7-UINT32_GET [chars]:[dec] failed to get destination slot. error [dec]
Explanation pak_netio_uint32_get() failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

QNET Messages
Error Message     
%OS-QNET-7-SIO_Q_PROD q_produce for QNET tx failed, rc = [dec]

Explanation could not send pkt to fabric driver.
Recommended Action This should not occur in normal conditions

	Cisco IOS XR System Error Reference Guide for XR1200 Series Platform Specific Messages, Release 3.3
	Operating System (OS) Messages
Cisco IOS XR System Error Reference Guide for XR1200 Series Platform Specific Messages, Release 3.3 Preface Overview Fabric Messages ASIC Fabric Interface Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 1 (L1) Messages Layer 2 (L2) Messages Line Card (LC) Messages Media Messages Manageability (MGBL) Messages Operating System (OS) Messages Packet Infrastructure Messages Platform Messages Quality of Service (QOS) Messages Routing Messages	Download this chapter Operating System (OS) Messages Download the complete book Book-level PDF: Cisco IOS XR Sytem Error Reference Guide for XR12000 Series Platform Specific Messages (PDF - 2 MB) Feedback Table Of Contents Operating System (OS) Messages GSP_NOTIF Messages KD_MBUS Messages QNET_LC Messages QNET Messages Operating System (OS) Messages This section contains all Operating System(OS) and OS infrastructure related System Error Messages. The following facility codes are represented in this module: •GSP_NOTIF Messages •KD_MBUS Messages •QNET_LC Messages •QNET Messages GSP_NOTIF Messages Error Message %OS-GSP_NOTIF-3-msg_failed Failure to notify node state when [chars]: [chars] Explanation The internal communication channel is broken. Recommended Action Must restart the process. KD_MBUS Messages Error Message %OS-KD_MBUS-1-EVENT_MGR_CREATE_FAILED [chars]: can't create event manager. [chars] Explanation Failed to create event manager for the process Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.' Error Message %OS-KD_MBUS-1-FLASH_FULL No space in bootflash to write. Size of data: [dec], Data: [chars] Explanation Bootflash is full Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.' Error Message %OS-KD_MBUS-3-COMPRESS_INIT_FAILED Compress initialization failed. Probably low memory Explanation Could not initalize data structure for compression Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.' Error Message %OS-KD_MBUS-3-CORE_FILE_OPEN_FAILED Could not open [chars]. Error: [chars] Explanation Open of file failed Recommended Action Check if valid file location and filename Error Message %OS-KD_MBUS-3-DEBUG_INIT_FAILED [chars] Explanation Debug init failed Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-KD_MBUS-3-FAIL_DEBUG_REG [chars]: Can't connect to configuration, [chars] Explanation DUMPER debugging service register to sysdb failed. Recommended Action Check the existence of the Sysdb service. The system is supposed to re-register if the Sysdb service is available. Error Message %OS-KD_MBUS-3-SYSDB_BIND_FAILURE Unable to bind to [chars]. Error: [chars] Explanation Could not connect to sysdb Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.' Error Message %OS-KD_MBUS-3-SYSDB_GET_FAILURE Unable to get item [chars]. Error: [chars] Explanation Item possible not in sysdb Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.' Error Message %OS-KD_MBUS-3-WRITE_FAILED Write of size [dec] to fd [dec] failed. Error: [chars] Explanation Most probably some problem with the file system Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.' Error Message %OS-KD_MBUS-4-SYSDB_SET_FAILURE Could not set [chars]. [chars] Explanation Could not set sysdb item. Recommended Action 'Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.' Error Message %OS-KD_MBUS-6-CORE_DUMP_NOT_CONFIGURED Core dump failed since dump location not configured Explanation Core dump location needs to be configured before dumping Recommended Action Configure core dump location using exception kernel command QNET_LC Messages Error Message %OS-QNET_LC-7-BASE_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec]) Explanation qnetbase_builder_func() called with bad chain type. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-QNET_LC-7-BASE_CONTROL_FUNC_ERR [chars]:[dec]:[chars]: Base Control function erroneously called! Explanation qnetbase_control_func() wrongly called. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-QNET_LC-7-CAPS_BAD_CHAIN_TYPE [chars]:[dec]:[chars]: Invalid attempt to build chain (type [dec]) Explanation qnetcaps_builder_func() called with wrong chain type. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-QNET_LC-7-CAPS_CONTROL_FUNC_ERR [chars]:[dec]:[chars]: Caps Control function erroneously called! Explanation qnetcaps_control_func() has been called, which should never happen. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-QNET_LC-7-DUPLICATE_BMA_PAK [chars]: Cannot duplicate BMA packet (rc=[dec] dropping Qnet packet. Explanation pak_netio_duplicate() failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-QNET_LC-7-ENCAPS_FUNC_ERR [chars]:[dec]:[chars]: Qnet encapsulation node erroneously called! Explanation qnetcaps_encaps() has been called, which should never happen. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-QNET_LC-7-LOST_QNET_CONN Lost connection to Qnet process; dropping packets. Explanation netio_dll_packet_input_NEW() to Qnet failed and Qnet connection is closed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-QNET_LC-7-PAK_INPUT_FAIL [chars]:[dec]:[chars]: packet_input returned non-zero result code ([dec]) Explanation netio_dll_packet_input_NEW() to Qnet failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %OS-QNET_LC-7-UINT32_GET [chars]:[dec] failed to get destination slot. error [dec] Explanation pak_netio_uint32_get() failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. QNET Messages Error Message %OS-QNET-7-SIO_Q_PROD q_produce for QNET tx failed, rc = [dec] Explanation could not send pkt to fabric driver. Recommended Action This should not occur in normal conditions
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks