Cisco IOS XR System Error Reference Guide for XR1200 Series Platform Specific Messages, Release 3.3 - Installation Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

Installation Messages

PKG_PLAT_MEM_CACHE_OWNER Messages

PKG_PLAT_MEM_CACHE Messages

PKG_PLAT Messages

Installation Messages

This section contains all installation related System Error Messages. The following facility codes are represented in this module:

•PKG_PLAT_MEM_CACHE_OWNER Messages

•PKG_PLAT_MEM_CACHE Messages

•PKG_PLAT Messages

PKG_PLAT_MEM_CACHE_OWNER Messages
Error Message     
%INSTALL-PKG_PLAT_MEM_CACHE_OWNER-3-INTERNALERR Internal error: [chars]
Explanation An internal software error occurred.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%INSTALL-PKG_PLAT_MEM_CACHE_OWNER-7-NULL_PTR An invalid (NULL) parameter was passed to the packaging infrastructure
Explanation An internal error has occurred in an application causing it to send invalid data to the packaging infrastructure. The current request or operation may not be carried out.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PKG_PLAT_MEM_CACHE Messages
Error Message     
%INSTALL-PKG_PLAT_MEM_CACHE-7-NULL_PTR An invalid (NULL) parameter was passed to the packaging infrastructure
Explanation An internal error has occurred in an application causing it to send invalid data to the packaging infrastructure. The current request or operation may not be carried out.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

PKG_PLAT Messages
Error Message     
%INSTALL-PKG_PLAT-7-INVALID_BOOTHELPER_VERSION Unable to find valid GSR boothelper filename. Valid boothelper versions are [chars] and [chars]
Explanation Operation to locate the official GSR boothelper filename failed. The router may have a wrong version of GSR boothelper. Please note that the check is based on boothelper filename rather than the boothelper version.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%INSTALL-PKG_PLAT-7-IO_FAIL The packaging infrastructure was unable to carry out an I/O operation to a file ([chars]), error: [chars]
Explanation Failed to read or write to the specified file, which is required to proceed further. The current request or operation may not be carried out.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%INSTALL-PKG_PLAT-7-NO_MEM Failed to allocate [unsigned int] bytes of memory
Explanation The requested operation could not be accomplished because of a low memory condition.
Recommended Action This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration.
Error Message     
%INSTALL-PKG_PLAT-7-NULL_PTR An invalid (NULL) parameter was passed to the packaging infrastructure
Explanation An internal error has occurred in an application causing it to send invalid data to the packaging infrastructure. The current request or operation may not be carried out.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%INSTALL-PKG_PLAT-7-OPEN_FAIL The packaging infrastructure was unable to open a file ([chars]), error: [chars].
Explanation Failed to open the specified file, which is required to proceed further. The request or operation may not be carried out.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%INSTALL-PKG_PLAT-7-UNKNOWN_NODE_TYPE The packaging infrastructure was unable to determine the type of a card ([hex])
Explanation Either the card type is invalid, or the infrastructure is behaving incorrectly. The current request or operation may not be carried out.
Recommended Action Upgrade to latest OS release. Check for unsupported hardware.

	Cisco IOS XR System Error Reference Guide for XR1200 Series Platform Specific Messages, Release 3.3
	Installation Messages
Cisco IOS XR System Error Reference Guide for XR1200 Series Platform Specific Messages, Release 3.3 Preface Overview Fabric Messages ASIC Fabric Interface Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 1 (L1) Messages Layer 2 (L2) Messages Line Card (LC) Messages Media Messages Manageability (MGBL) Messages Operating System (OS) Messages Packet Infrastructure Messages Platform Messages Quality of Service (QOS) Messages Routing Messages	Download this chapter Installation Messages Download the complete book Book-level PDF: Cisco IOS XR Sytem Error Reference Guide for XR12000 Series Platform Specific Messages (PDF - 2 MB) Feedback Table Of Contents Installation Messages PKG_PLAT_MEM_CACHE_OWNER Messages PKG_PLAT_MEM_CACHE Messages PKG_PLAT Messages Installation Messages This section contains all installation related System Error Messages. The following facility codes are represented in this module: •PKG_PLAT_MEM_CACHE_OWNER Messages •PKG_PLAT_MEM_CACHE Messages •PKG_PLAT Messages PKG_PLAT_MEM_CACHE_OWNER Messages Error Message %INSTALL-PKG_PLAT_MEM_CACHE_OWNER-3-INTERNALERR Internal error: [chars] Explanation An internal software error occurred. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %INSTALL-PKG_PLAT_MEM_CACHE_OWNER-7-NULL_PTR An invalid (NULL) parameter was passed to the packaging infrastructure Explanation An internal error has occurred in an application causing it to send invalid data to the packaging infrastructure. The current request or operation may not be carried out. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. PKG_PLAT_MEM_CACHE Messages Error Message %INSTALL-PKG_PLAT_MEM_CACHE-7-NULL_PTR An invalid (NULL) parameter was passed to the packaging infrastructure Explanation An internal error has occurred in an application causing it to send invalid data to the packaging infrastructure. The current request or operation may not be carried out. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. PKG_PLAT Messages Error Message %INSTALL-PKG_PLAT-7-INVALID_BOOTHELPER_VERSION Unable to find valid GSR boothelper filename. Valid boothelper versions are [chars] and [chars] Explanation Operation to locate the official GSR boothelper filename failed. The router may have a wrong version of GSR boothelper. Please note that the check is based on boothelper filename rather than the boothelper version. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %INSTALL-PKG_PLAT-7-IO_FAIL The packaging infrastructure was unable to carry out an I/O operation to a file ([chars]), error: [chars] Explanation Failed to read or write to the specified file, which is required to proceed further. The current request or operation may not be carried out. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %INSTALL-PKG_PLAT-7-NO_MEM Failed to allocate [unsigned int] bytes of memory Explanation The requested operation could not be accomplished because of a low memory condition. Recommended Action This indicates a low memory condition. Reduce other system activity to ease memory demands. If conditions warrant, upgrade to a larger memory configuration. Error Message %INSTALL-PKG_PLAT-7-NULL_PTR An invalid (NULL) parameter was passed to the packaging infrastructure Explanation An internal error has occurred in an application causing it to send invalid data to the packaging infrastructure. The current request or operation may not be carried out. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %INSTALL-PKG_PLAT-7-OPEN_FAIL The packaging infrastructure was unable to open a file ([chars]), error: [chars]. Explanation Failed to open the specified file, which is required to proceed further. The request or operation may not be carried out. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %INSTALL-PKG_PLAT-7-UNKNOWN_NODE_TYPE The packaging infrastructure was unable to determine the type of a card ([hex]) Explanation Either the card type is invalid, or the infrastructure is behaving incorrectly. The current request or operation may not be carried out. Recommended Action Upgrade to latest OS release. Check for unsupported hardware.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks