Cisco IOS XR System Error Reference Guide for Platform Independent Messages, Release 3.3 - Default Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

Default Messages

MPLS_VPN_MIB Messages

Default Messages

This section contains all default related System Error Messages. The following facility codes are represented in this module:

•MPLS_VPN_MIB Messages

MPLS_VPN_MIB Messages
Error Message     
%DEFAULT-MPLS_VPN_MIB-3-ERR_DLL_LOAD Cannot load DLL: [chars]
Explanation Cannot load DLL error.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%DEFAULT-MPLS_VPN_MIB-3-ERR_DLL_SYMBOL_ERROR Cannot find symbol [chars] in DLL [chars]
Explanation Cannot find DLL symbol error.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%DEFAULT-MPLS_VPN_MIB-3-ERR_INIT [chars] : [chars]
Explanation Initialization failed
Recommended Action Enable 'debug mpls vpn init' and restart the process mpls_vpn_mib.

	Cisco IOS XR System Error Reference Guide for Platform Independent Messages, Release 3.3
	Default Messages
Cisco IOS XR System Error Reference Guide for Platform Independent Messages, Release 3.3 Preface Overview Access Control List (ACL) Messages Default Messages Diagnostic Messages Forwarding Information Base Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 1 (L1) Messages Layer 2 (L2) Messages Media Messages Manageability (MGBL) Messages Operating System (OS) Messages Packet Infrastructure Messages Platform Messages Quality of Service (QOS) Messages Routing Messages Security Messages Service Messages Simple Network Management Protocol (SNMP ) Messages System Database Messages	Download this chapter Default Messages Download the complete book Book-level PDF: Cisco IOS XR System Error Reference Guide for Platform Independent Messages (PDF - 7 MB) Feedback Table Of Contents Default Messages MPLS_VPN_MIB Messages Default Messages This section contains all default related System Error Messages. The following facility codes are represented in this module: •MPLS_VPN_MIB Messages MPLS_VPN_MIB Messages Error Message %DEFAULT-MPLS_VPN_MIB-3-ERR_DLL_LOAD Cannot load DLL: [chars] Explanation Cannot load DLL error. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %DEFAULT-MPLS_VPN_MIB-3-ERR_DLL_SYMBOL_ERROR Cannot find symbol [chars] in DLL [chars] Explanation Cannot find DLL symbol error. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %DEFAULT-MPLS_VPN_MIB-3-ERR_INIT [chars] : [chars] Explanation Initialization failed Recommended Action Enable 'debug mpls vpn init' and restart the process mpls_vpn_mib.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks