Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.3 - Routing Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

Routing Messages

HFR_IPV4_MRIB Messages

IPV4_MFWD_HFR Messages

IPV4MC_STATIC Messages

MPLS_HW Messages

Routing Messages

This section contains all routing related System Error Messages, such as MRIB, MFWD, and so forth. The following facility codes are represented in this module:

•HFR_IPV4_MRIB Messages

•IPV4_MFWD_HFR Messages

•IPV4MC_STATIC Messages

•MPLS_HW Messages

HFR_IPV4_MRIB Messages
Error Message     
%ROUTING-HFR_IPV4_MRIB-3-CHKPT_ERR Failed to [chars] : [chars]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-HFR_IPV4_MRIB-3-FGID_ADD_ERR Failed to add LC [dec] into FGID [dec]: [chars]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-HFR_IPV4_MRIB-3-FGID_BATCH_ADD_ERR Failed to add batch of LCs into FGIDs: [chars]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-HFR_IPV4_MRIB-3-FGID_BATCH_REMOVE_ERR Failed to remove batch of LCs from FGIDs: [chars]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-HFR_IPV4_MRIB-3-FGID_ERR Failed to [chars]: [chars]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-HFR_IPV4_MRIB-3-FGID_REMOVE_ERR Failed to remove LC [dec] from FGID [dec]: [chars]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-HFR_IPV4_MRIB-3-IFH_ERR Failed to [chars] : [chars]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-HFR_IPV4_MRIB-3-IM_NAME_ERR im_interface_name error in function [chars] : [chars]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-HFR_IPV4_MRIB-3-INTERNAL_ERR Failed to [chars] : [chars]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-HFR_IPV4_MRIB-3-INVALID_FGID_ERR Failed to [chars] : invalid fgid value [hex]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-HFR_IPV4_MRIB-3-MEM_ERR Failed to [chars] for [chars]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-HFR_IPV4_MRIB-3-PERF_ERR Failed to [chars]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4_MFWD_HFR Messages
Error Message     
%ROUTING-IPV4_MFWD_HFR-5-ERR_SYSDB_INIT [chars] : [chars]
Explanation The MFWD-HFR library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4_MFWD_HFR-7-ERR_BAG_REGISTRY Couldn't register bags : [chars]
Explanation The MFWD-HFR library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4_MFWD_HFR-7-ERR_EDM_REGISTER Couldn't register edm : [chars]
Explanation The MFWD-HFR library encountered internal error during EDM init setup. The init setup will be retried for finite number of retries.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4_MFWD_HFR-7-ERR_GEN [chars] failed : [chars]
Explanation MFWD-HFR library encountered error during setup. The init setup will be retried for finite number of retries.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

IPV4MC_STATIC Messages
Error Message     
%ROUTING-IPV4MC_STATIC-7-ERR_CERR_V [dec] [chars] [chars]

Explanation Internal error. Cannot Register with CERR_V subsystem
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4MC_STATIC-7-ERR_DEBUG_INIT [chars] [dec] [chars]

Explanation Internal error. Static Mcast debug library initilization failed
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4MC_STATIC-7-ERR_EVENT_INIT Cannot Initialize sigevent structure: [chars]
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4MC_STATIC-7-ERR_EVM_CREATE Event Manager creation Failed: [chars]

Explanation Internal error. Failed while creating event manager
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4MC_STATIC-7-ERR_IDB_INIT Cannot initialize IDB list: [chars]
Explanation Internal error. Cannot create initialize IDB list
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4MC_STATIC-7-ERR_INTF Error [chars] [chars]
Explanation Internal error. Error while doing IM or IDB stuff
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4MC_STATIC-7-ERR_MRIB [chars]: [chars]
Explanation Internal error. Error while doing MRIB API
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4MC_STATIC-7-ERR_ROUTE [dec]: [chars] ([chars],[chars]/[dec])
Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4MC_STATIC-7-ERR_TIMER_ASYNC_CODE Cannot obtain pulse code for the timer: [chars]

Explanation Internal error.
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4MC_STATIC-7-ERR_TIMER_CREATE_LEAF Cannot create timer leaf: [chars]
Explanation Internal error. Cannot create manageed timer leaf
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4MC_STATIC-7-ERR_TIMER_INIT Cannot create managed timer: [chars]
Explanation Internal error. Cannot create manageed timer
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%ROUTING-IPV4MC_STATIC-7-ERR_TOPOLOGY_INIT Cannot create static topology
Explanation Internal error. Cannot create manageed timer leaf
Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

MPLS_HW Messages
Error Message     
%ROUTING-MPLS_HW-2-ERROR [chars]. Error = [chars] (errno=[dec]).
Explanation There was a critical system call failure resulting in a failure to provide some system service as indicated in the message text.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Error Message     
%ROUTING-MPLS_HW-2-ERROR_TLU_ALLOC [chars]. Error = [chars] (errno=[dec]).
Explanation Hardware memory allocation for table lookup unit (TLU) failed. This can be because the system has more forwarding entries than supported limits or there is a software defect.
Recommended Action Please collect output of show tlu server summary [egress/ingress] loc to see why the line card is running out of forwarding entries. Then try to reduce the entries if possible. Copy the error message and report to your technical support representative.
Error Message     
%ROUTING-MPLS_HW-2-ERROR_TLU_WRITE [chars]. Error = [chars] (errno=[dec]).
Explanation Hardware memory write for table lookup unit (TLU) failed. This can because 1) connection to mipc lost. 2) mipc/metro problem.
Recommended Action Please collect output of show pse ipc clinet-connection all loc and show asic-errors pse [0|1] all loc . Copy the error message and report to technical support representative.
Error Message     
%ROUTING-MPLS_HW-2-ERROR_WITH_LABEL [chars]. Error = [chars] (errno=[dec]). Out label = [dec].
Explanation There was a critical system call failure resulting in a failure to provide some system service as indicated in the message text.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Error Message     
%ROUTING-MPLS_HW-6-INFO [chars]. Error = [chars] (errno [dec]).
Explanation There was an internal failure that may impact non-essential system function.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
Error Message     
%ROUTING-MPLS_HW-6-INFO_WITH_LABEL [chars]. Error = [chars] (errno [dec]). Out label = [dec].
Explanation There was an internal failure that may impact non-essential system function.
Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.

	Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.3
	Routing Messages
Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.3 Overview Preface Diagnostic Messages Driver Messages Fabric Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 2 (L2) Messages Media Messages Manageability (MGBL) Messages Packet Infrastructure Messages Platform Messages Quality of Service (QOS) Messages Routing Messages	Download this chapter Routing Messages Download the complete book Book-level PDF: Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages (PDF - 2 MB) Feedback Table Of Contents Routing Messages HFR_IPV4_MRIB Messages IPV4_MFWD_HFR Messages IPV4MC_STATIC Messages MPLS_HW Messages Routing Messages This section contains all routing related System Error Messages, such as MRIB, MFWD, and so forth. The following facility codes are represented in this module: •HFR_IPV4_MRIB Messages •IPV4_MFWD_HFR Messages •IPV4MC_STATIC Messages •MPLS_HW Messages HFR_IPV4_MRIB Messages Error Message %ROUTING-HFR_IPV4_MRIB-3-CHKPT_ERR Failed to [chars] : [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-HFR_IPV4_MRIB-3-FGID_ADD_ERR Failed to add LC [dec] into FGID [dec]: [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-HFR_IPV4_MRIB-3-FGID_BATCH_ADD_ERR Failed to add batch of LCs into FGIDs: [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-HFR_IPV4_MRIB-3-FGID_BATCH_REMOVE_ERR Failed to remove batch of LCs from FGIDs: [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-HFR_IPV4_MRIB-3-FGID_ERR Failed to [chars]: [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-HFR_IPV4_MRIB-3-FGID_REMOVE_ERR Failed to remove LC [dec] from FGID [dec]: [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-HFR_IPV4_MRIB-3-IFH_ERR Failed to [chars] : [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-HFR_IPV4_MRIB-3-IM_NAME_ERR im_interface_name error in function [chars] : [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-HFR_IPV4_MRIB-3-INTERNAL_ERR Failed to [chars] : [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-HFR_IPV4_MRIB-3-INVALID_FGID_ERR Failed to [chars] : invalid fgid value [hex] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-HFR_IPV4_MRIB-3-MEM_ERR Failed to [chars] for [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-HFR_IPV4_MRIB-3-PERF_ERR Failed to [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. IPV4_MFWD_HFR Messages Error Message %ROUTING-IPV4_MFWD_HFR-5-ERR_SYSDB_INIT [chars] : [chars] Explanation The MFWD-HFR library encountered internal error during Sysdb init setup. The init setup will be retried for finite number of retries. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4_MFWD_HFR-7-ERR_BAG_REGISTRY Couldn't register bags : [chars] Explanation The MFWD-HFR library encountered internal error during sysdb/edm init setup. The init setup will be retried for finite number of retries. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4_MFWD_HFR-7-ERR_EDM_REGISTER Couldn't register edm : [chars] Explanation The MFWD-HFR library encountered internal error during EDM init setup. The init setup will be retried for finite number of retries. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4_MFWD_HFR-7-ERR_GEN [chars] failed : [chars] Explanation MFWD-HFR library encountered error during setup. The init setup will be retried for finite number of retries. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. IPV4MC_STATIC Messages Error Message %ROUTING-IPV4MC_STATIC-7-ERR_CERR_V [dec] [chars] [chars] Explanation Internal error. Cannot Register with CERR_V subsystem Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4MC_STATIC-7-ERR_DEBUG_INIT [chars] [dec] [chars] Explanation Internal error. Static Mcast debug library initilization failed Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4MC_STATIC-7-ERR_EVENT_INIT Cannot Initialize sigevent structure: [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4MC_STATIC-7-ERR_EVM_CREATE Event Manager creation Failed: [chars] Explanation Internal error. Failed while creating event manager Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4MC_STATIC-7-ERR_IDB_INIT Cannot initialize IDB list: [chars] Explanation Internal error. Cannot create initialize IDB list Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4MC_STATIC-7-ERR_INTF Error [chars] [chars] Explanation Internal error. Error while doing IM or IDB stuff Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4MC_STATIC-7-ERR_MRIB [chars]: [chars] Explanation Internal error. Error while doing MRIB API Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4MC_STATIC-7-ERR_ROUTE [dec]: [chars] ([chars],[chars]/[dec]) Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4MC_STATIC-7-ERR_TIMER_ASYNC_CODE Cannot obtain pulse code for the timer: [chars] Explanation Internal error. Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4MC_STATIC-7-ERR_TIMER_CREATE_LEAF Cannot create timer leaf: [chars] Explanation Internal error. Cannot create manageed timer leaf Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4MC_STATIC-7-ERR_TIMER_INIT Cannot create managed timer: [chars] Explanation Internal error. Cannot create manageed timer Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %ROUTING-IPV4MC_STATIC-7-ERR_TOPOLOGY_INIT Cannot create static topology Explanation Internal error. Cannot create manageed timer leaf Recommended Action If the message recurs, copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. MPLS_HW Messages Error Message %ROUTING-MPLS_HW-2-ERROR [chars]. Error = [chars] (errno=[dec]). Explanation There was a critical system call failure resulting in a failure to provide some system service as indicated in the message text. Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative. Error Message %ROUTING-MPLS_HW-2-ERROR_TLU_ALLOC [chars]. Error = [chars] (errno=[dec]). Explanation Hardware memory allocation for table lookup unit (TLU) failed. This can be because the system has more forwarding entries than supported limits or there is a software defect. Recommended Action Please collect output of show tlu server summary [egress/ingress] loc to see why the line card is running out of forwarding entries. Then try to reduce the entries if possible. Copy the error message and report to your technical support representative. Error Message %ROUTING-MPLS_HW-2-ERROR_TLU_WRITE [chars]. Error = [chars] (errno=[dec]). Explanation Hardware memory write for table lookup unit (TLU) failed. This can because 1) connection to mipc lost. 2) mipc/metro problem. Recommended Action Please collect output of show pse ipc clinet-connection all loc and show asic-errors pse [0\|1] all loc . Copy the error message and report to technical support representative. Error Message %ROUTING-MPLS_HW-2-ERROR_WITH_LABEL [chars]. Error = [chars] (errno=[dec]). Out label = [dec]. Explanation There was a critical system call failure resulting in a failure to provide some system service as indicated in the message text. Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative. Error Message %ROUTING-MPLS_HW-6-INFO [chars]. Error = [chars] (errno [dec]). Explanation There was an internal failure that may impact non-essential system function. Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative. Error Message %ROUTING-MPLS_HW-6-INFO_WITH_LABEL [chars]. Error = [chars] (errno [dec]). Out label = [dec]. Explanation There was an internal failure that may impact non-essential system function. Recommended Action Copy the error message exactly as it appears, and report it to your technical support representative.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks