Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.3 - Quality of Service (QOS) Messages [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

Quality of Service (QoS) Messages

MDRR Messages

QOS Messages

Quality of Service (QoS) Messages

This section contains all Quality of Service related System Error Messages. The following facility codes are represented in this module:

•MDRR Messages

•QOS Messages

MDRR Messages
Error Message     
%QOS-MDRR-4-TOO_MANY_CLASSES Number of classes configured in the policymap exceeds the maximum number of queues allowed by the MDRR node
Explanation Number of configured classes is larger than the number of queues allowed.
Recommended Action Reduced the number of classes configured in the policymap.

QOS Messages
Error Message     
%QOS-QOS-2-MALLOC_FAIL Memory alloc error [chars] [chars]
Explanation The router cannot allocate more memory.
Recommended Action It may be necessary to free some memory by exiting a program.
Error Message     
%QOS-QOS-3-BW_BUNDLE_ABSOLUTE Absolute values cannot be used for policies configured on Bundle interfaces. Use percentage values instead
Explanation This is a fatal condition.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-BW_SUM_EXCEEDS_100_PC Sum of bandwidth allocated to all classes exceeds 100 percent. Allocated BW : [dec] percent
Explanation This is a fatal condition.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars]
Explanation Connection to some server failed.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-DEBUG_FAIL Error occurred while registering for debugging services
Explanation Error occurred while waiting for an event.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-DEF_CLASS_BW_EXCEED_99_PC Sum of bandwidth allocated to non-default classes exceeds 99 percent- Allocated BW : [dec] percent
Explanation This is a fatal condition.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-EVM_CREATE_FAIL Failed to create event manager
Explanation Failed to create event manager.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-MAX_CLASS_EXCEEDED_FOR_FABQOS Policy exceeds number of classes allowed for FabQoS
Explanation Policy map is rejected.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-ONLY_PRI_OR_BW_REM_PERCENT_ALLOWED Can not configure anything other than priority or bandwidth remaining percent for a fabqos policy
Explanation Policy map is rejected.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-OVER_SUBSCRIPTION_OF_MIN_BW_GAURANTEES There is oversubscription of minimum bandwidth guarantees - taking into account HP bandwidth. Bandwidth guarantees may not be met for this policy Allocated BW : [dec] percent
Explanation This is a fatal condition.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-QFIFO_DEBUG_NETIO_INIT_FAIL Failed to Initialize debug netion - [chars] Error : [chars]
Explanation This is a fatal condition.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-QFIFO_SHOW_INT_INFO_FAIL Show FIFO init info Failed - [chars] Error : [chars]
Explanation This is a fatal condition.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-UNSUPPORTED_MATCH_COS_CONFIG match cos command is not supported on the egress side. Invalid Configuration
Explanation We do not support 'match cos' command on egress policies since layer2 encapsulations are removed before packets are sent to egress
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-UNSUPPORTED_MIN_BW_CONFIG Bandwidth command is not supported on the ingress side. Invalid Configuration
Explanation We do not support bandwidth command on ingress policies. You can configure 'bandwidth remaining' to assign weights for the different queues.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-UNSUPPORTED_POLICER_RATE Unsupported policer value used in policymap : [dec] kbps. (It must be less than 16 Gbps)
Explanation This is a fatal condition. Policy map is rejected.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-UNSUPPORTED_Q_LIMIT_CONFIG In order to configure queue-limit for a class, you need to configure atleast one feature that allocates a separate queue for that class
Explanation If you configure queue-limit command for a class, then that class requires a separate queue (due to h/w implementation). Since the user has not configured any feature for this class that allocates a separate queue for that class, the user is not allowed to configure queue-limit for that class.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-WAIT_ERR Error occurred while waiting for an event
Explanation Error occurred while waiting for an event.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-3-WRONG_QUANTAS_SPECIFIED Bandwidth remaining should only be specified in multiples of 5
Explanation Policy map is rejected.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-5-PARENT_HAS_NO_BW_MIN_CONFIGURED Child class bw min is reduced to zero due no min bw guarantee in parent
Explanation Normally bandwidth command in a child class requires similar command in the parent class. Otherwise minimum bandwidth guaranteed for child class would be zero
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
Error Message     
%QOS-QOS-7-NETIO_SET_PAK_SHAPEQ_FAIL Failed to set packet shape Q - [chars] Error : [chars]
Explanation This is a fatal condition.
Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.

	Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.3
	Quality of Service (QOS) Messages
Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages, Release 3.3 Overview Preface Diagnostic Messages Driver Messages Fabric Messages High Availability (HA) Messages Installation Messages Internet Protocol (IP) Messages Layer 2 (L2) Messages Media Messages Manageability (MGBL) Messages Packet Infrastructure Messages Platform Messages Quality of Service (QOS) Messages Routing Messages	Download this chapter Quality of Service (QOS) Messages Download the complete book Book-level PDF: Cisco IOS XR System Error Reference Guide for CRS-1 Router Platform Specific Messages (PDF - 2 MB) Feedback Table Of Contents Quality of Service (QoS) Messages MDRR Messages QOS Messages Quality of Service (QoS) Messages This section contains all Quality of Service related System Error Messages. The following facility codes are represented in this module: •MDRR Messages •QOS Messages MDRR Messages Error Message %QOS-MDRR-4-TOO_MANY_CLASSES Number of classes configured in the policymap exceeds the maximum number of queues allowed by the MDRR node Explanation Number of configured classes is larger than the number of queues allowed. Recommended Action Reduced the number of classes configured in the policymap. QOS Messages Error Message %QOS-QOS-2-MALLOC_FAIL Memory alloc error [chars] [chars] Explanation The router cannot allocate more memory. Recommended Action It may be necessary to free some memory by exiting a program. Error Message %QOS-QOS-3-BW_BUNDLE_ABSOLUTE Absolute values cannot be used for policies configured on Bundle interfaces. Use percentage values instead Explanation This is a fatal condition. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-BW_SUM_EXCEEDS_100_PC Sum of bandwidth allocated to all classes exceeds 100 percent. Allocated BW : [dec] percent Explanation This is a fatal condition. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-CONNECT_FAIL Server connection failed - [chars]. Error code - [chars] Explanation Connection to some server failed. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-DEBUG_FAIL Error occurred while registering for debugging services Explanation Error occurred while waiting for an event. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-DEF_CLASS_BW_EXCEED_99_PC Sum of bandwidth allocated to non-default classes exceeds 99 percent- Allocated BW : [dec] percent Explanation This is a fatal condition. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-EVM_CREATE_FAIL Failed to create event manager Explanation Failed to create event manager. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-MAX_CLASS_EXCEEDED_FOR_FABQOS Policy exceeds number of classes allowed for FabQoS Explanation Policy map is rejected. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-ONLY_PRI_OR_BW_REM_PERCENT_ALLOWED Can not configure anything other than priority or bandwidth remaining percent for a fabqos policy Explanation Policy map is rejected. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-OVER_SUBSCRIPTION_OF_MIN_BW_GAURANTEES There is oversubscription of minimum bandwidth guarantees - taking into account HP bandwidth. Bandwidth guarantees may not be met for this policy Allocated BW : [dec] percent Explanation This is a fatal condition. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-QFIFO_DEBUG_NETIO_INIT_FAIL Failed to Initialize debug netion - [chars] Error : [chars] Explanation This is a fatal condition. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-QFIFO_SHOW_INT_INFO_FAIL Show FIFO init info Failed - [chars] Error : [chars] Explanation This is a fatal condition. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-UNSUPPORTED_MATCH_COS_CONFIG match cos command is not supported on the egress side. Invalid Configuration Explanation We do not support 'match cos' command on egress policies since layer2 encapsulations are removed before packets are sent to egress Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-UNSUPPORTED_MIN_BW_CONFIG Bandwidth command is not supported on the ingress side. Invalid Configuration Explanation We do not support bandwidth command on ingress policies. You can configure 'bandwidth remaining' to assign weights for the different queues. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-UNSUPPORTED_POLICER_RATE Unsupported policer value used in policymap : [dec] kbps. (It must be less than 16 Gbps) Explanation This is a fatal condition. Policy map is rejected. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-UNSUPPORTED_Q_LIMIT_CONFIG In order to configure queue-limit for a class, you need to configure atleast one feature that allocates a separate queue for that class Explanation If you configure queue-limit command for a class, then that class requires a separate queue (due to h/w implementation). Since the user has not configured any feature for this class that allocates a separate queue for that class, the user is not allowed to configure queue-limit for that class. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-WAIT_ERR Error occurred while waiting for an event Explanation Error occurred while waiting for an event. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-3-WRONG_QUANTAS_SPECIFIED Bandwidth remaining should only be specified in multiples of 5 Explanation Policy map is rejected. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-5-PARENT_HAS_NO_BW_MIN_CONFIGURED Child class bw min is reduced to zero due no min bw guarantee in parent Explanation Normally bandwidth command in a child class requires similar command in the parent class. Otherwise minimum bandwidth guaranteed for child class would be zero Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information. Error Message %QOS-QOS-7-NETIO_SET_PAK_SHAPEQ_FAIL Failed to set packet shape Q - [chars] Error : [chars] Explanation This is a fatal condition. Recommended Action Copy the error message exactly as it appears on the console or in the system log, call your Cisco technical support representative and provide the representative with the gathered information.
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks