Table Of Contents

Diagnostic Messages

HFRDIAG Messages

HFRDIAGBASE Messages

Diagnostic Messages

---

This section contains all Diagnostics related System Error Messages. The following facility codes are represented in this module:

•HFRDIAG Messages

•HFRDIAGBASE Messages

HFRDIAG Messages

Error Message     

%DIAG-HFRDIAG-3-ERROR [chars]

Explanation    The diagnostic test has detected an error.

Recommended Action    Repair or replace the failing unit under test (UUT).

Error Message     

%DIAG-HFRDIAG-6-INFO [chars]

Explanation    Informational diagnostics message.

Recommended Action    Nothing. Reporting normal progress of diagnostics.

HFRDIAGBASE Messages

Error Message     

%DIAG-HFRDIAGBASE-3-SW_ERROR [chars]

Explanation    An internal software error occurred.

Recommended Action    Copy the error message exactly as it appears on the screen and gather the output of show tech-support and any other relevant information. Contact your technical support representative with the gathered information.

Error Message     

%DIAG-HFRDIAGBASE-4-WARNING [chars]

Explanation    Software detected an unexpected error or condition, which is not fatal to the features performance, but which may have affected a test result or similar.

Recommended Action    Take note of the message, to see if it may explain a later test failure or similar.

Error Message     

%DIAG-HFRDIAGBASE-6-INFO [chars]

Explanation    Informational diagnostics message.

Recommended Action    Nothing. Reporting normal progress of diagnostics.

Error Message     

%DIAG-HFRDIAGBASE-7-DEBUG [chars]

Explanation    Diagnostics debug message.

Recommended Action    Nothing. This message is used to assist debugging software or hardware behaviours.