Table Of Contents

Software Authentication Manager Debug Commands on Cisco IOS XR Software

debug sam

Software Authentication Manager Debug Commands on Cisco IOS XR Software

---

This chapter describes the Cisco IOS XR software debug Software Authentication Manager (SAM) commands.

For high-level, conceptual information about using debug commands generally, see Using Debug Commands on IOS XR Software, Release 3.3.

debug sam

To display transactional information for the Software Authentication Manager (SAM), use the debug sam command in EXEC mode. To disable debugging output, use the no form of this command.

debug sam {detail | event}

no debug sam {detail | event}

Syntax Description

detail	Display all SAM related information (transactions -events, errors).
event	Displays all SAM events.

Defaults

No default behavior or values

Command Modes

EXEC

Command History

Release	Modification
Release 2.0	This command was introduced on the Cisco CRS-1.
Release 3.0	No modification.
Release 3.2	This command was supported on the Cisco XR 12000 Series Router.
Release 3.3.0	No modification.

Usage Guidelines

To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Debugging output is assigned high priority in the CPU process and, therefore, can affect system performance. For more information about the impact on system performance when using debug commands, refer to Using Debug Commands on Cisco IOS XR Software.

Task ID

Task ID	Operations
crypto	read

Examples

The following is sample output from the debug sam command using the event keyword:

RP/0/RP0/CPU0:router# debug sam event

RP/0/RP0/CPU0:Aug 3 20:08:30.149 : rsvp[117]: Forwarding PATH message on POS0/3/0/0 from 
51.51.51.51 to 70.70.70.70 (length=212 bytes, TTL=254, TOS=0xff, flags=0x1 ,RA) 

RP/0/0/CPU0:k2#RP/0/0/CPU0:Aug 28 00:33:21.725 MET2MET,M3.5.0/: sam_server[265]: SAM Table 
completes set_nvram_digest (0)

RP/0/0/CPU0:Aug 28 00:33:22.301 MET2MET,M3.5.0/: sam_server[265]: SAM Event: SAM begins 
initialization

RP/0/0/CPU0:Aug 28 00:33:22.303 MET2MET,M3.5.0/: sam_server[265]: SAM begins table setup

RP/0/0/CPU0:Aug 28 00:33:22.307 MET2MET,M3.5.0/: sam_server[265]: SAM server binding to 
SysDB at /oper/sam/node/0/

RP/0/0/CPU0:Aug 28 00:33:22.395 MET2MET,M3.5.0/: sam_server[265]: SAM completes table 
setup, rc=No error

RP/0/0/CPU0:Aug 28 00:33:22.408 MET2MET,M3.5.0/: sam_server[265]: SAM Server begins 
comparing the nvram digest for table SysDB Digest

RP/0/0/CPU0:Aug 28 00:33:22.477 MET2MET,M3.5.0/: sam_server[265]: SAM Server completes 
comparing the nvram digest