Cisco Craft Works Interface Configuration Applications Reference Guide, Release 3.3 - Configuration Applications Overview [Cisco IOS XR Software (End-of-Sale)]

Table Of Contents

Configuration Applications Overview

Configuration Applications Overview

The Craft Works Interface (CWI) allows you to configure Cisco routers in a network. The CWI provides the following configuration applications:

•The following Administration Configuration applications manage user access, permissions, and alarms:

–Chapter 2 "Alarm Administration Application"—Specifies event (alarm) log and correlation rule parameters.

–Chapter 3 "User Administration Application"—Allows root-system (superusers) to manage users, user groups, and task groups.

•The following Interfaces Configuration applications display, configure, and manage Ethernet, and Packet-over-SONET/SDH (POS) interfaces:

–Chapter 4 "Interface Common Attributes Configuration Application"—Displays and sets attributes common to all available interfaces.

–Chapter 5 "Interface Ethernet Configuration Application"—Displays and sets the attributes specific to the available Ethernet interfaces.

–Chapter 6 "Interface POS Configuration Application"—Displays and sets the attributes specific to the available POS interfaces.

•The SONET application configures the SONET on a router port using Layer 1 SONET transport technology. See Chapter 7 "SONET Port Configuration Application".

•The Access Controls Lists application displays, creates, and edits access control lists (ACLs) and access control entries (ACEs). See Chapter 8 "Access Control Lists Application".

	Cisco Craft Works Interface Configuration Applications Reference Guide, Release 3.3
	Configuration Applications Overview
Cisco Craft Works Interface Configuration Applications Reference Guide, Release 3.3 Preface Configuration Applications Overview Alarm Administration Application User Administration Application Interface Common Attributes Configuration Application Interface Ethernet Configuration Application Interface POS Configuration Application SONET Port Configuration Application Access Control Lists Application Glossary Index	Download this chapter Configuration Applications Overview Download the complete book Book-level PDF: Cisco Craft Works Interface Configuration Applications Reference Guide (PDF - 1 MB) Feedback Table Of Contents Configuration Applications Overview Configuration Applications Overview The Craft Works Interface (CWI) allows you to configure Cisco routers in a network. The CWI provides the following configuration applications: •The following Administration Configuration applications manage user access, permissions, and alarms: –Chapter 2 "Alarm Administration Application"—Specifies event (alarm) log and correlation rule parameters. –Chapter 3 "User Administration Application"—Allows root-system (superusers) to manage users, user groups, and task groups. •The following Interfaces Configuration applications display, configure, and manage Ethernet, and Packet-over-SONET/SDH (POS) interfaces: –Chapter 4 "Interface Common Attributes Configuration Application"—Displays and sets attributes common to all available interfaces. –Chapter 5 "Interface Ethernet Configuration Application"—Displays and sets the attributes specific to the available Ethernet interfaces. –Chapter 6 "Interface POS Configuration Application"—Displays and sets the attributes specific to the available POS interfaces. •The SONET application configures the SONET on a router port using Layer 1 SONET transport technology. See Chapter 7 "SONET Port Configuration Application". •The Access Controls Lists application displays, creates, and edits access control lists (ACLs) and access control entries (ACEs). See Chapter 8 "Access Control Lists Application".
	Terms & Conditions \| Privacy Statement \| Cookie Policy \| Trademarks