This guide collects together in one place information about Cisco IOS voice features having to do with the H.323 standard for sending and receiving audio, video, and data on an IP-based internetwork.
This first chapter of the guide is a feature roadmap. It describes how to access Cisco Feature Navigator and lists H.323 features by Cisco IOS release.
Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.
Cisco IOS H.323 Feature List
Table 1 lists H.323 features by Cisco IOS release. Features that are introduced in a particular release are available in that and subsequent releases.
Provides additional security for H.323 networks by introducing the ability to validate intradomain and interdomain gatekeeper-to-gatekeeper LRQ messages on a per-hop basis. When used in conjunction with per-call security using IZCT, protects network resources from attackers and prevents security holes.
H.323 Dual Tone Multifrequency Relay Using Named Telephone Events
Enhances interoperability of Cisco gateways with equipment from other vendors by implementing H245v7 extensions to support RFC2833 in-band audio telephone events and in-band audio tones as well as support for asymmetrical RTP dynamic payload types.
Cisco H.323 Scalability and Interoperability Enhancements for Gateways
Upgrades the gateway to comply with H.323 Version 3.
"Configuring H.323 Gateways" section on page 41 chapter of this guide
H.323 Version 2 Enhancements
Upgrades Cisco IOS software to comply with the mandatory requirements and several optional features of the version 2 specification. Enhances the existing VoIP gateway and multimedia conference manager gatekeeper and proxy.
1Features that are introduced in a particular release are available in that and subsequent releases.
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.