Cisco Resource Reservation Protocol Agent

Available Languages

Download Options

  • PDF     (33.6 KB)
    View with Adobe Reader on a variety of devices
Updated:March 31, 2011

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Cisco Resource Reservation Protocol Agent

Table Of Contents

Cisco Resource Reservation Protocol Agent

Prerequisites for Cisco Resource Reservation Protocol Agent

Configuring Cisco Resource Reservation Protocol Agent


Cisco Resource Reservation Protocol Agent

The Cisco RSVP Agent feature enables the call admission control (CAC) mechanism based on the Resource Reservation Protocol (RSVP), which is applicable to any network topology and which eases the restriction of a traditional hub-and-spoke topology.

Prerequisites for Cisco Resource Reservation Protocol Agent

Cisco Unified Border Element (Enterprise)

•Cisco IOS XE Release 3.3S or a later release must be installed and running on your Cisco ASR 1000 Series Router.

Configuring Cisco Resource Reservation Protocol Agent

To enable this feature, see the "Unified CM RSVP-Enabled Locations" section in the "Call Admission Control" chapter of the Cisco Unified Communications SRND Based on Cisco Unified Communications Manager 7.x Guide.

Detailed command information for the dspfarm profile, ip rsvp bandwidth, maximum sessions, switchover method immediate, switchback method guard timeout, and timer receiver-rtp commands is located in the Cisco IOS Voice Command Reference.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco