This roadmap lists the features documented in the Cisco IOS IP SLAs configuration guide and maps them to the modules in which they appear.
Feature and Release Support
Table 1 lists Cisco IOS IP SLAs feature support for Cisco IOS Releases 12.3T and 12.4.
Only features that were introduced or modified in Cisco IOS Release 12.3(14)T or a later release appear in the table. Not all features may be supported in your Cisco IOS software release.
Cisco IOS software images are specific to a Cisco IOS software release, a feature set, and a platform. Use Cisco Feature Navigator to find information about platform support and Cisco IOS software image support. Access Cisco Feature Navigator at http://www.cisco.com/go/fn. You must have an account on Cisco.com. If you do not have an account or have forgotten your username or password, click Cancel at the login dialog box and follow the instructions that appear.
Note Table 1 lists only the Cisco IOS software release that introduced support for a given feature in a given Cisco IOS software release train. Unless noted otherwise, subsequent releases of that Cisco IOS software release train also support that feature.
Table 1 Supported Cisco IOS IP SLAs Features
IP SLAs DHCP Operation
The Cisco IOS IP SLAs Dynamic Host Control Protocol (DHCP) operation allows you to schedule and measure the network response time between a Cisco device and a DHCP server to obtain an IP address.
"IP SLAs—Analyzing IP Service Levels Using the DHCP Operation"
The Cisco IOS IP SLAs Internet Control Message Protocol (ICMP) path echo operation allows you to measure end-to-end and hop-by-hop network response time between a Cisco device and other devices using IP.
"IP SLAs—Analyzing IP Service Levels Using the ICMP Path Echo Operation"
The Cisco IOS IP SLAs Transmission Control Protocol (TCP) connect operation allows you to measure the network response time taken to perform a TCP Connect operation between a Cisco device and other devices using IP.
"IP SLAs—Analyzing IP Service Levels Using the TCP Connect Operation"
The Cisco IOS IP SLAs User Datagram Protocol (UDP) jitter operation allows you to measure round-trip delay, one-way delay, one-way jitter, one-way packet loss, and connectivity in networks that carry UDP traffic.
"IP SLAs—Analyzing IP Service Levels Using the UDP Jitter Operation"
The Cisco IOS IP SLAs Voice over IP (VoIP) gatekeeper registration delay operation allows you to measure the average, median, or aggregated network response time of registration attempts from a VoIP gateway to a VoIP gatekeeper device.
"IP SLAs—Analyzing IP Service Levels Using the VoIP Gatekeeper Registration Delay Operation"