Table Of Contents
L2TP Domain Screening, Rules Based
L2TP Domain Screening, Rules Based
The L2TP Domain Screening, Rules Based feature allows per-user L2TP tunnel setup by creating customized Policy Manager match rules. The L2TP Domain Screening, Rules Based feature allows you to construct rules to customize specific policy behavior.
Configuration Information
Configuration information is included in the "Configuring AAA for VPDNs" module of the Cisco IOS VPDN Configuration Guide, Release 12.2SB, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122sb/cg/sbvpdn_c/vpc2ausb.htm
For a complete list of features included in the "Configuring AAA for VPDNs" module, see the Feature Information Table located toward the end of the module.
Command Reference Information
Command reference information is included in the Cisco IOS Voice Command Reference, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios124/124cr/hvr_r/index.htm
New Commands
The following commands are new for this feature:
•
authenticate
•
set identifier
•
substitute
List of All Release 12.2 Commands
An alphabetical list of all Cisco IOS Release 12.2 commands is in the Cisco IOS Master Commands List, Release 12.2, at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122mindx/index.htm
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2006 Cisco Systems, Inc. All rights reserved.

