Table Of Contents
Cisco IOS Dial Technologies Configuration Guide, Release 12.2SB
Overview
Part 1: Dial Interfaces, Controllers, and Lines
Part 2: Modem Configuration and Management
Part 3: ISDN Configuration
Part 4: Signaling Configuration
Part 5: Dial-on-Demand Routing Configuration
Part 6: Dial-Backup Configuration
Part 7: Dial-Related Addressing Services
Part 8: Virtual Templates, Profiles, and Networks
Part 9: PPP Configuration
Part 10: Callback and Bandwidth Allocation Configuration
Part 11: Dial Access Specialized Features
Part 12: Dial Access Scenarios
Appendix
New-Feature List and Feature Guide Book-Level PDF for Cisco IOS Dial Technologies, Release 12.3
Book Index to the Cisco IOS Dial Technologies Configuration Guide, Release 12.2
Book-Level PDF for Cisco IOS Dial Technologies Configuration Guide, Release 12.2
Cisco IOS Dial Technologies Configuration Guide, Release 12.2SB
The Cisco IOS Dial Technologies Configuration Guide, Release 12.2SB (known as a "virtual configuration guide") consists of the Cisco IOS Release 12.2 configuration guide and new-feature documentation for Cisco IOS Releases 12.2 T and 12.3(1).
In some cases, information contained in the new-feature documentation for Cisco IOS Release 12.3(1) and early-deployment Cisco IOS releases numbered 12.2 T augments or supersedes content in the Cisco IOS Release 12.2 configuration guides. New-feature documentation in later 12.2 T releases may replace new-feature documentation in earlier 12.2 T releases.
The following outline includes links to Cisco IOS Release 12.2 chapters and Cisco IOS Release 12.2 T new-feature documentation. Use these documents to configure your Cisco IOS Release 12.3 features.
Overview
•
Chapter: About Cisco IOS Software Documentation for Release 12.3 (12.3 document)
•Chapter: Using Cisco IOS Software for Release 12.3 (12.3 document)
Part 1: Dial Interfaces, Controllers, and Lines
•Chapter: Overview of Dial Interfaces, Controllers, and Lines (12.2 document; also pertains to 12.3*)
•Chapter: Configuring Asynchronous Lines and Interfaces (12.2 document; also pertains to 12.3*)
•Chapter: Configuring Asynchronous Serial Traffic Over UDP (12.2 document; also pertains to 12.3*)
–New Feature: Asynchronous Line Monitoring (12.2(2)T document)
–New Feature: Asynchronous Call Queueing by Role (12.2(15)T document)
Part 2: Modem Configuration and Management
•Chapter: Overview of Modem Interfaces (12.2 document; also pertains to 12.3*)
•Chapter: Configuring and Managing Integrated Modems (12.2 document; also pertains to 12.3*)
–New Feature: 1- and 2-Port V.90 Modem WICs for Cisco 2600 and Cisco 3600 Series Multiservice Platforms (12.2(8)T document)
–New Feature: Call Tracker show Commands Extensions (12.2(11)T document)
–New Feature: MICA and NextPort Modem Tech-Support Command Additions (12.2(11)T document)
–New Feature: PIAFS Wireless Data Protocol Version 2.1 for Cisco MICA Modems (12.2(11)T document)
–New Feature: V.92 and V.44 Support for Digital Modems (12.2(15)T document)
–New Feature:V.92 Modem on Hold for Cisco AS5300 and Cisco AS5800 Universal Access Servers (For use with Cisco MICA portware) (12.2(11)T document)
–New Feature: V.92 Modem on Hold for Cisco AS5350, AS5400, and AS5850 Universal Gateways and Cisco AS5800 Universal Access Servers (For use with NextPort firmware) (12.2(11)T document)
–New Feature: V.92 Quick Connect for Cisco AS5300 and Cisco AS5800 Universal Access Servers (For use with Cisco MICA portware) (12.2(11)T document)
–New Feature: V.92 Quick Connect for Cisco AS5350, AS5400, AS5850 Universal Gateways, and Cisco AS5800 Universal Access Servers (For use with NextPort firmware) (12.2(11)T document)
–New Feature: V.92 Reporting Using RADIUS Attribute v.92-info (12.3(1) document)
•Chapter: Configuring and Managing Cisco Access Servers and Dial Shelves (12.2 document; also pertains to 12.3*)
•Chapter: Configuring and Managing External Modems (12.2 document; also pertains to 12.3*)
•Chapter: Modem Signal and Line States (12.2 document; also pertains to 12.3*)
•Chapter: Using the Cisco Modem User Interface (12.3 virtual chapter)
–New Feature: Cisco Modem User Interface (12.2(4)T document)
•Chapter: Creating and Using Modem Chat Scripts (12.2 document; also pertains to 12.3*)
–New Feature: Modem Script and System Script Support in Large-Scale Dial-Out (12.2(2)T document)
Part 3: ISDN Configuration
•Chapter: Configuring ISDN BRI (12.2 document; also pertains to 12.3*)
–New Feature: Leased and Switched BRI Interface for ETSI NET3 (12.2(4)T document)
–New Feature: ISDN BCAC and Round-Robin Channel Selection Enhancements (12.2(4)T document)
•Chapter: Configuring Virtual Asynchronous Traffic over ISDN (12.2 document; also pertains to 12.3*)
•Chapter: Configuring Modem Use over ISDN BRI (12.2 document; also pertains to 12.3*)
•Chapter: Configuring X.25 on ISDN (12.2 document; also pertains to 12.3*)
•Chapter: Configuring X.25 on ISDN Using AO/D (12.2 document; also pertains to 12.3*)
•Chapter: Configuring ISDN on Cisco 800 Series Routers (12.2 document; also pertains to 12.3*)
Part 4: Signaling Configuration
•Chapter: Configuring ISDN PRI (12.2 document; also pertains to 12.3*)
–New Feature: ISDN PRI-SLT (12.2(15)T document)
•Chapter: Configuring ISDN Special Signaling (12.2 document; also pertains to 12.3*)
•Chapter: Configuring Network Side ISDN PRI Signaling, Trunking, and Switching (12.2 document; also pertains to 12.3*)
–New Feature: Dialing Number Enhancement (12.2(11)T document)
Part 5: Dial-on-Demand Routing Configuration
•Chapter: Preparing to Configure DDR (12.2 document; also pertains to 12.3*)
•Chapter: Configuring Legacy DDR Spokes (12.2 document; also pertains to 12.3*)
•Chapter: Configuring Legacy DDR Hubs (12.2 document; also pertains to 12.3*)
•Chapter: Configuring Peer-to-Peer DDR with Dialer Profiles (12.2 document; also pertains to 12.3*)
–New Feature: Dialer Map VRF-Aware for an MPLS VPN (12.2(8)T document)
–New Feature: Dialer Persistent (12.2(11)T document)
–New Feature: Dialer Watch Connect Delay (12.2(8)T document)
–New Feature: PPPoE Client DDR Idle-Timer (12.2(13)T document)
–New Feature: Redial Enhancements (12.2(4)T document)
–New Feature: Rotating Through Dial Strings (12.2(8)T document)
•Chapter: Configuring Dialer CEF (12.3 virtual chapter)
–New Feature: Dialer CEF (12.2(4)T document)
•Chapter: Configuring Snapshot Routing (12.2 document; also pertains to 12.3*)
Part 6: Dial-Backup Configuration
•Chapter: Configuring Dial Backup for Serial Lines (12.2 document; also pertains to 12.3*)
•Chapter:Configuring Dial Backup with Dialer Profiles (12.2 document; also pertains to 12.3*)
•Chapter: Configuring Dial Backup Using Dialer Watch (12.2 document; also pertains to 12.3*)
–New Feature: Dialer Watch Connect Delay (12.2(8)T document)
Part 7: Dial-Related Addressing Services
•Chapter: Configuring Cisco Easy IP (12.2 document; also pertains to 12.3*)
Part 8: Virtual Templates, Profiles, and Networks
•Chapter: Configuring Virtual Template Interfaces (12.2 document; also pertains to 12.3*)
•Chapter: Configuring Virtual Profiles (12.2 document; also pertains to 12.3*)
•Chapter: Configuring Virtual Private Networks (12.2 document; also pertains to 12.3*)
–New Feature: Cisco Easy VPN Remote Feature (12.2(13)T document)
–New Feature: Default VPDN Group Template (12.2(8)T document)
–New Feature: L2TP Dial-Out Load Balancing and Redundancy (12.2(15)T document)
–New Feature: L2TP Extended Failover (12.2(13)T document)
–New Feature: L2TP Redirect (12.2(13)T document)
–New Feature: L2TP Security (12.2(11)T document)
–New Feature: RADIUS Attribute 82: Tunnel Assignment ID (12.2(11)T document)
–New Feature: RADIUS Tunnel Attribute Extensions (12.2(15)T document)
–New Feature: RADIUS Tunnel Preference for Load Balancing and Fail-Over (12.2(11)T document)
–New Feature: Shell-Based Authentication of VPDN Users (12.2(2)T document)
–New Feature: Timer and Retry Enhancements for L2TP and L2F (12.2(11)T document)
–New Feature: VPDN Group Session Limiting (12.2.(11)T document)
–New Feature: VPDN Multihop by DNIS (12.2(13)T document)
Part 9: PPP Configuration
•Chapter: Configuring Asynchronous SLIP and PPP (12.2 document; also pertains to 12.3*)
–New Feature: Optimized PPP Negotiation (12.2(11)T document)
•Chapter: Configuring Media-Independent PPP and Multilink PPP (12.2 document; also pertains to 12.3*)
–New Feature: Customer Profile Idle Timer Enhancements for Interesting Traffic (12.2(11)T document)
–New Feature: Multiclass Multilink PPP (12.2(13)T document)
•Chapter: Configuring Multichassis Multilink PPP (12.2 document; also pertains to 12.3*)
Part 10: Callback and Bandwidth Allocation Configuration
•Chapter: Configuring Asynchronous Callback (12.2 document; also pertains to 12.3*)
•Chapter: Configuring PPP Callback (12.2 document; also pertains to 12.3*)
•Chapter: Configuring ISDN Caller ID Callback (12.2 document; also pertains to 12.3*)
•Chapter: Configuring BACP (12.2 document; also pertains to 12.3*)
Part 11: Dial Access Specialized Features
•Chapter: Configuring Large-Scale Dial-Out (12.2 document; also pertains to 12.3*)
–New Feature: L2TP Large-Scale Dial-Out (12.2(11)T document)
–New Feature: L2TP Large-Scale Dial-Out per-User Attribute via AAA (12.2(15)T document)
–New Feature: Large-Scale Dial-Out (LSDO) VRF Aware (12.2(8)T document)
–New Feature: Modem Script and System Script Support in Large-Scale Dial-Out (12.2(2)T document)
•Chapter: Configuring per-User Configuration (12.2 document; also pertains to 12.3*)
•Chapter: Configuring Resource Pool Management (12.2 document; also pertains to 12.3*)
•Chapter: Configuring Wholesale Dial Performance Optimization (12.2 document; also pertains to 12.3*)
Part 12: Dial Access Scenarios
•Chapter: Dial Networking Business Applications (12.2 document; also pertains to 12.3*)
•Chapter: Enterprise Dial Scenarios and Configurations (12.2 document; also pertains to 12.3*)
•Chapter: Telco and ISP Dial Scenarios and Configurations (12.2 document; also pertains to 12.3*)
Appendix
•Appendix: Modem Initialization Strings (12.2 document; also pertains to 12.3*)
Click the above link to access an alphabetically ordered new-features list and a feature guide book-level PDF for the Dial technology areas.
Click the above link to display the index of the Cisco IOS Dial Technologies Configuration Guide, Release 12.2. This index does not include the new-feature documentation for the releases numbered 12.2 T.
Click the above link to download the book-level PDF of the Cisco IOS Dial Technologies Configuration Guide, Release 12.2. This book-level PDF does not include the new-feature documentation for the releases numbered 12.2 T.
*Cisco IOS Release 12.2 documents are still current for Cisco IOS Release 12.3 where not superseded by Cisco IOS Release 12.2 T and 12.3(1) new-feature documentation.
