Table Of Contents
show spe digital disconnect-reason
show spe modem disconnect-reason
Command Reference
This section documents new and modified commands. All other commands used with this feature are documented in the Cisco IOS Release 12.1 command reference publications.
•
port
•
•
•
busyout (port)
To disable a port by waiting for the active services on the specified port to terminate, use the busyout port configuration command. To re-enable the ports, use the no form of this command.
busyout
no busyout
Syntax Description
This command has no arguments or keywords.
Defaults
Busyout is not enabled.
Command Modes
Port configuration
Command History
Usage Guidelines
The busyout command disables a port by waiting for the active services on the specified port to terminate. The no form of this command re enables the ports.
Examples
The following example shows output from the busyout command on the Cisco AS5400 with the universal por card. This example busies out ports 1 to 10 on slot 1:
Router(config)# port 1/1 1/10Router(config-port)# busyoutRouter(config-port)#The following example shows output from the busyout command on the Cisco AS5800 with UPC. This example busies out ports 1 to 10 on slot 1:
Router(config)# port 1/1/1 1/1/10Router(config-port)# busyoutRouter(config-port)#Related Commands
busyout (spe)
To disable active calls by waiting for the active services on the specified service processing elements (SPEs) to terminate, use the busyout SPE configuration command. To re-enable the SPEs, use the no form of this command.
busyout
no busyout
Syntax Description
This command has no arguments or keywords.
Defaults
Busyout is not enabled.
Command Modes
SPE configuration
Command History
Usage Guidelines
You can perform auto-diagnostic tests and firmware upgrades when you put the SPEs in the busiedout state. Active ports on the specified SPE will change the state of the specified range of SPEs to the busyout pending state. The state changes from busyout pending to besieged when all calls end. Use the show spe command to see the state of the range of SPEs. Use the shutdown command to override the busyout command. Use the no busyout command to reenable the SPEs.
Examples
The following example shows output from the busyout command on the Cisco AS5400 with universal port card. This example busies out all active ports in slot 1, SPE 1 to 10:
Router(config)# spe 1/1 1/10Router(config-spe)# busyoutRouter(config-spe)#Related Commands
clear port
To shutdown specified ports, use the clear port EXEC command.
Cisco AS5400 and Cisco AS5850
clear port [slot | slot/port]
Cisco AS5800
clear port [shelf/slot | shelf/slot/port]
Syntax Description
Defaults
No default.
Command Modes
EXEC
Command History
Usage Guidelines
If you specify the shelf, slot, and port, you clear that port on that service processing element (SPE). If you only specify the shelf and slot, you clear all active ports on that particular shelf and slot. If you do not specify a shelf, slot, or port, you clear all the ports on the gateway.
Examples
The following example shows output from the clear port command on the Cisco AS5400 with universal port card. This example clears slot 1, port 1:
Router# clear port 1/1This will clear port 1/01[confirm]yThe following example shows output from the clear port command on the Cisco AS5800 with universal port card. This example clears shelf 1, slot 3, port 0:
Router# clear port 01/03/00This will clear port 1/03/00[confirm]yRelated Commands
clear port log
To clear all log entries for the specified ports, use the clear port log EXEC command.
Cisco AS5400 and Cisco AS5850
clear port log [slot | slot/port]
Cisco AS5800
clear port log [shelf/slot | shelf/slot/port]
Syntax Description
Defaults
Disabled
Command Modes
EXEC
Command History
Usage Guidelines
The clear port log command clears the entire port log. You cannot remove individual service events from the port log. On the Cisco AS5400 only, you can use the show port modem log and the show port digital log commands to display specific service events, but you must use the clear port log command to clear the entire port event log.
Examples
The following example shows output from the clear port log command on the Cisco AS5400 with universal port card. This example clears slot 1, port 1:
Router# clear port log 1/1This will clear log event history for port(s)1/01 - 1/01[confirm]yThe following example shows output from the clear port log command on the Cisco AS5800 with universal port card. This example clears shelf 1, slot 3, port 0:
Router# clear port log 01/03/00This will clear port 1/03/00[confirm]yRelated Commands
clear spe
To reboot all specified service processing elements (SPEs), use the clear spe EXEC command.
Cisco AS5400 and Cisco AS5850
clear spe [slot | slot/spe]
Cisco AS5800
clear spe [shelf/slot | shelf/slot/spe]
Syntax Description
Defaults
Disabled
Command Modes
EXEC
Command History
Usage Guidelines
The clear spe command configures firmware download to the specified SPE or the range of SPEs and starts the power-on self-test (POST) feature. This command can be entered at any time regardless of the state of the SPEs.
Caution
This command downloads configured SPEs with firmware as configured. Unconfigured SPEs download with the default firmware, which is the bundled version. To configure and manage the downloading of firmware without abruptly terminating SPEs, use the firmware location or firmware upgrade commands as appropriate.
Examples
The following example displays the prompt when the clear spe command is entered on the Cisco AS5400 with universal port card. The command prompts the system to perform a coldstart on slot 1, SPE 1:
Router# clear spe 1/1Router# This will tear all active calls on the SPE(s), if any.[confirm]yThe following example displays the prompt when the clear spe command is entered on the Cisco AS5800 with universal port card. The command prompts the system to perform a coldstart on shelf 1, slot 8, SPE 0:
Router# clear spe 1/8/0Router# This will tear all active calls on the SPE(s), if any.[confirm]yRelated Commands
clear spe counters
To clear all statistics, use the clear spe counters EXEC command.
Cisco AS5400 and Cisco AS5850
clear spe counters [slot | slot/spe]
Cisco AS5800
clear spe counters [shelf/slot | shelf/slot/spe]
Syntax Description
Defaults
Disabled.
Command Modes
EXEC
Command History
Usage Guidelines
The clear spe counters command clears statistical counters of all service types for the specified SPE, range of SPEs, or all SPEs. If you do not set a parameter, you clear all SPE statistical counters. If you do not specify the SPE or a SPE range, then all SPE statistical counters are cleared.
Examples
The following example clears all statistics when the clear spe counters command is entered on the Cisco AS5400 with universal port card.
Router# clear spe counters 01/3 01/7This will clear statistic counters for SPEs 1/03 - 1/07 [confirm]yThe following example clears all statistics when the clear spe counters command is entered on the Cisco AS5800 with universal port card. This example clears shelf 1, slot 3, ports 0 to 11.
Router# clear spe counters 01/03/00 01/03/11This will clear statistic counters for SPEs 1/03/00 - 1/03/11[confirm]yclear spe log
To clear all log entries for the specified SPEs, use the clear spe log EXEC command.
Cisco AS5400 and Cisco AS5850
clear spe log [slot]
Cisco AS5800
clear spe log [shelf/slot]
Syntax Description
Defaults
No default.
Command Modes
EXEC
Command History
Usage Guidelines
The clear spe log command clears event entries in the slot history event log. If you do not specify the shelf/slot range, all service processing element (SPE) event entries clear. If you specify the shelf/slot, only the event entries for that slot clear.
Examples
The following example shows output from the clear spe log command on the Cisco AS5400 with universal port card. This example clears the SPE log from slot 3.Router# clear spe log 1 3This will clear slot event history for slot(s) 3 - 3[confirm]yThe following example shows output from the clear spe log command on the Cisco AS5800 with universal port card. This example clears shelf 1, slot 8, SPE 0.
Router# clear spe log 1/8/0This will clear slot event history for slot(s) 8 - 8[confirm]y
Related Commands
show spe log
Displays history statistics of all SPEs, a specified SPE, or the specified range of SPEs.
firmware location
To specify a firmware file to upgrade, use the firmware location SPE configuration command. To disable the specified firmware file to upgrade, use no form of the command.
firmware location filename
no firmware location filename
Syntax Description
Defaults
No defaults.
Command Modes
SPE configuration.
Command History
Usage Guidelines
You can get the new service processing element (SPE) firmware image on the Cisco web site. You must first copy the SPE image from a TFTP server to Flash memory using the copy tftp flash command. This command specifies the location of the firmware file and downloads the firmware in the range of SPEs. Your range is specified depending on the states you configured using the firmware upgrade command.
Use the firmware location command in conjunction with the firmware upgrade command. The entire SPE is necessarily affected by the firmware location command.
The copy modem flash command is replaced by these commands for the universal port card on the Cisco AS5400.
You cannot use this command on SPEs that are in the Bad state.
Note
Examples
The following example sets the SPEs, specifies the firmware file location, opens the file (if on Flash memory), and downloads to the SPE on the Cisco AS5400.
Router(config)# spe 1/03Router(config-spe)# firmware locationRouter(config-spe)# endThe following example sets the SPEs, specifies the firmware file location in Flash memory, downloads to the SPE, and reports on the status using the show spe version command on the Cisco AS5800.
Router(config)# spe 1/03Router(config-spe)# firmware location flash:np_6_75Started downloading firmware flash:np_6_75.speRouter(config-spe)#Router# show spe version 1/03Related Commands
firmware upgrade
To specify a service processing element (SPE) firmware upgrade method, use the firmware upgrade SPE configuration command. To disable the specified firmware upgrade method, use the no form of the command.
firmware upgrade {busyout | recovery | reboot}
no firmware upgrade {busyout | recovery | reboot}
Syntax Description
busyout
Upgrades when all calls are terminated on the SPE.
recovery
Delays firmware upgrade until recovery maintenance time.
reboot
Upgrades at the next reboot.
Defaults
No default.
Command Modes
SPE configuration
Command History
Usage Guidelines
Three methods of upgrade are available: busyout, reboot, and download-maintenance.
The busyout keyword upgrades SPE firmware after waiting for all calls to be terminated on an SPE. The recovery keyword delays firmware upgrade until recovery maintenance time. The reboot keyword requests the Cisco gateways to upgrade SPE firmware at the next reboot.
Use this command in conjunction with the firmware location command and the spe download maintenance command.
The SPE firmware location command is designed to integrate all continuous ranges of SPEs containing the same firmware location. However, the firmware upgrade command does not affect the ranges of SPEs. As such, all SPEs within the ranges of SPEs must have the same firmware upgrade mode or the router uses busyout, one of the upgrade modes. If you want to upgrade a single SPE within an existing range of SPEs with a different upgrade mode than is currently configured, you must first change the upgrade mode for the entire range of SPEs and then change the firmware location for the specific SPE being upgraded.
Furthermore, each time you merge ranges of SPEs due to configuration changes, verify that the configuration of the SPE firmware upgrade remains effective to what is desired.
Examples
The following example sets the SPEs and specifies that the firmware upgrade is to take place when all calls are terminated on the SPE:
Router(config)# spe 1/03Router(config-spe)# firmware locationRouter(config-spe)# firmware upgrade busyoutRouter(config-spe)#If the busyout upgrade is specified, or if no upgrade mode is specified, the SPE ports are set into a "pending download" state when you use the firmware location command on the specified SPE. The pending download state prevents any ports in that state to be allocated for new calls until the state is cleared. Ports with active calls remain active for their call durations, but enter the pending download state when they terminate. This pending download state can be cleared only when the SPE is finally downloaded. When all ports within the SPE are in the pending download state and no active calls remain on the SPE, the SPE is reloaded. The busyout option is the fastest way to upgrade ports on an active router but can severely impact the capacity of the router during the upgrade. The following example sets the default option for the firmware upgrade process:
Router(config-spe)# firmware upgrade busyoutIf the reboot upgrade is specified, the SPEs are not reloaded to the new firmware location until the router is rebooted. The reboot upgrade option is useful for routers that need to have their SPE upgraded and that are also going to be rebooted for maintenance. When the new firmware is configured, the configuration takes effect after the reboot takes place. The following example sets the firmware upgrade reboot:
Router(config-spe)# firmware upgrade rebootIf the download-maintenance upgrade is specified, the SPEs are reloaded based on the SPE download-maintenance algorithm. Only when no active calls exist on the SPE does the firmware download take place. Furthermore, at the configured "SPE download-maintenance time" (3:00 a.m.), the SPE download-maintenance process attempts, in a controlled fashion, to reload the SPEs by busying out the SPEs for a window duration of time to make the download take place. Consult the SPE recovery documentation for further details. The download-maintenance upgrade option is the least impacting way to upgrade SPEs on an active router. Capacity is kept at a maximum. However, this option can take a few days for all ports to be reloaded to the new firmware location. The following example sets the system for a firmware upgrade download-maintenance:
Router(config-spe)# firmware upgrade download-maintenanceRelated Commands
port
To configuration a port, use the port global configuration command. To disable a configured port, use the no form of the command.
Cisco AS5400 and Cisco AS5850
port {slot | slot/port}
no port {slot | slot/port}
Cisco AS5800
port {shelf/slot | shelf/slot/port}
no port {shelf/slot | shelf/slot/port}
Syntax Description
Defaults
Disabled
Command Modes
Global configuration
Command History
12.1(3)T
This command was introduced.
12.1(5)XV
This command was supported on the Cisco AS5850.
Usage Guidelines
The port command helps you to enter the port configuration mode. The port configuration mode allows you to shut down or put individual ports or ranges of ports in busyout mode.The port should have an associated active session.
Examples
The following example shows how to enter the port configuring mode on ports 1 to 18 to perform further tasks on the ports:
Router# port 1/1 1/18Router(config-port)# shutdownRelated Commands
port modem autotest
To automatically and periodically perform a modem diagnostics test for modems inside the gateway or router, use the port modem autotest global configuration command. To disable or turn off the modem autotest service, use the no form of this command.
port modem autotest {error threshold | minimum modem | time hh:mm [interval]}
no port modem autotest
Syntax Description
Defaults
Modem diagnostics tests are disabled.
Command Modes
Global configuration
Command History
Usage Guidelines
The results of the port modem autotest are displayed in the show port modem test command's output. Ports that pass the diagnostic test are marked as Idle, Busy, Downloading, and Reset, and are put into service. Ports that fail the diagnostic test are marked as Bad, and are not put into service or tested again until they are no longer marked as Bad. If all the ports of an SPE are bad, the corresponding SPE is also marked bad. These ports cannot be used for call connections. Depending on how many ports are present and not marked Bad, this diagnostic test may take from 5 to 10 minutes to complete. You may perform additional testing on an inoperative port by executing the test port modem back-to-back command. The no port modem autotest command disables testing.
Examples
The following example shows how to set the modem autotest to run once per week at 3:00 a.m. Additionally, the autotest activates if the system detects a modem error count higher than 40 errors.
Determine the current time set on the gateway with the show clock EXEC command. In this example, the time and date set is 3:00 p.m, Monday, August 25, 1997:
Router# show clock*15:00:01.031 EST Aug 25 1997Enter global configuration mode and set the time you want the modem autotest to activate. In this example, the gateway is configured to run the modem autotest each ongoing Tuesday at 3:00 a.m:
Router# configure terminalEnter configuration commands, one per line. End with CNTL/Z.Router(config)# port modem autotest time 03:00 168Configure the autotest to activate if the system detects a high modem error count. In this example, the autotest activates if the system detects a modem error count higher than 40 errors. For the list of modem errors that are monitored by the modem autotest command, see the show modem call-stats command.
Router(config)# port modem autotest error 40Router(config)# exitRelated Commands
show port config
To display the active session's configuration parameters, use the show port config EXEC command.
Cisco AS5400 and Cisco AS5850
show port config {slot | slot/port}
Cisco AS5800
show port config {shelf/slot | shelf/slot/port}
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Usage Guidelines
The port should have an associated active session when the show port config command is entered.
Note
Examples
The following example shows output from the show port config command on the Cisco AS5400 with universal port card. This example shows port configuration for the modem service port slot 2, port 1:
Router# show port config 2/1Slot/SPE/Port -- 2/0/1Service Type :Modem serviceOriginate/Answer Mode :AnswerData Bits Selection :8Parity Selection :No ParityStop bits Selection :1V.42 ODP generation :EnabledEC Autodetect Time-out :5000 msProtocol Negotiation Time-out :10000 msProtocol Negotiation Fallback character :13Protocol Negotiation Retransmission Limit :12EC Min, Max Octets Frame length :256Data Compression :V.42bis or MNP5ARA Error Correction :ARA1.0 & ARA2.0 DisabledV.42 Error Correction :V.42(LAP-M) Originate&Answer enabledMNP Error Correction :MNP Originate&Answer enabledLink Protocol Fallback :Async Framing (Start/Stop/Parity)Calling Tone :DisabledGuard Tone :DisabledModem Standard :V.90 AutomodeMax Non-PCM Connect Rate :33600 bpsMin Non-PCM Connect Rate :300 bpsMax PCM Connect Rate :60000 bpsMin PCM Connect Rate :28000 bpsSignal Quality Threshold :Bit Errors >= 1:1000 cause recoveryFallback/Fallforward Squelch Timer :500 msFall Forward Timer :10000 msFall Back Timer :500 msTerminate Time-out :20 secsWait for Data Mode Time-out :60 secsLost Carrier To Hang-up Delay :1400 msPCM Transmit Level Setting :-13 dBmRetrain Limit :4V.34 Max Symbol Rate :3429 BaudV.34 Min Symbol Rate :2400 BaudV.34 Carrier Frequency :Auto Carrier SelectionV.34 Preemphasis Filter Selection :11+++ Escape Detection :Enabled-in-Originate-Mode-OnlyAT Command Processor :EnabledCall Setup Delay :0 msAutomatic Answer Delay :2 secsEscape Detection Character :ASCII 43 (+)Carriage Return Character :ASCII 13 (CR)Line Feed Character :ASCII 10 (LF)Backspace Character :ASCII 8 (BS)Pause Before Blind Dialing :2 secsComma Dial Modifier Time :2 secs
The following example shows port configuration information for a digital service port slot 2, port 23 on the Cisco AS5400 with universal port card:
Router# show port config 2/23Slot/SPE/Port -- 2/3/23Service Type : Digital serviceOriginate/Answer Mode : AnswerData Bits Selection : 8Parity Selection : No ParityStop bits Selection : 1Modem Standard : reservedThe following example shows port configuration information for a modem service on the Cisco AS5800 with universal port card:
Router# show port config 1/8Shelf/Slot/SPE/Port -- 1/8/27/165Service Type : Modem serviceOriginate/Answer Mode : AnswerData Bits Selection : 8Parity Selection : No ParityStop bits Selection : 1V.42 ODP generation : EnabledEC Autodetect Time-out : 5000 msProtocol Negotiation Time-out : 10000 msProtocol Negotiation Fallback character : 13Protocol Negotiation Retransmission Limit : 12EC Min, Max Octets Frame length : 256Data Compression : V.42bis or MNP5ARA Error Correction : ARA1.0 & ARA2.0 DisabledV.42 Error Correction : V.42(LAP-M) Originate&Answer enabledMNP Error Correction : MNP Originate&Answer enabledLink Protocol Fallback : Async Framing (Start/Stop/Parity)Calling Tone : DisabledGuard Tone : DisabledModem Standard : V.90 AutomodeMax Non-PCM Connect Rate : 33600 bpsMin Non-PCM Connect Rate : 300 bpsMax PCM Connect Rate : 60000 bps...Related Commands
show port operational-status
Displays the operational status of a specific port or range of ports.
show port digital log
To display the digital data event log, use the show port digital log EXEC command.
Cisco AS5400 and Cisco AS5850
show port digital log [reverse slot/port] [slot | slot/port]
Note
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
12.1(1)XD
This command was introduced on the Cisco AS5400.
12.1(3)T
This command was supported on the Cisco AS5400.
12.1(5)XV
This command was supported on the Cisco AS5850.
Examples
The following example shows output from the show port digital log on the Cisco AS5400 with universal port card:
Router# show port digital logPort 5/00 Events Log00:02:41: incoming called number: 35140Service type: DIGITAL_DATASession State: IDLEService type: DIGITAL_DATASession State: ACTIVE00:02:41: Digital State event:State: Steady00:02:40: Digital Static event:Connect Protocol : V.110Data Bits : 8Parity : 0Stop Bits : 1TX,RX Bit Rate : 19200, 19200Port 5/01 Events Log00:02:42: incoming called number: 35140Service type: DIGITAL_DATASession State: IDLEService type: DIGITAL_DATASession State: ACTIVE00:02:41: Digital State event:State: Steady00:02:41: Digital Static event:Connect Protocol : V.110Data Bits : 8Parity : 0Stop Bits : 1TX,RX Bit Rate : 19200, 19200Port 5/02 Events Log00:02:42: incoming called number: 35140Service type: DIGITAL_DATASession State: IDLEService type: DIGITAL_DATASession State: ACTIVE00:02:42: Digital State event:State: Steady00:02:42: Digital Static event:Connect Protocol : V.110Data Bits : 8Parity : 0Stop Bits : 1TX,RX Bit Rate : 19200, 19200Port 5/03 Events Log00:02:43: incoming called number: 35140Service type: DIGITAL_DATASession State: IDLEService type: DIGITAL_DATASession State: ACTIVE00:02:43: Digital State event:State: Steady00:02:43: Digital Static event:Connect Protocol : V.110Data Bits : 8Parity : 0...
Related Commands
show port modem calltracker
To display the port level information for an active modem, use the show port modem calltracker EXEC command.
Cisco AS5400 and Cisco AS5850
show port modem calltracker [slot | slot/port]
Cisco AS5800 with universal port card
show port modem calltracker [shelf/slot | shelf/slot/port]
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Usage Guidelines
When there is no call on the specified port, the most recent call information is displayed. This command uses the calltracker database. To enable calltracker, enter the calltracker enable global configuration command.
Examples
The following example shows output from the show port modem calltracker command on the Cisco AS5400 with universal port card. This example shows output for slot 3, port 3.
Router# show port modem calltracker 3/3-------------------------- call handle= 62 --------------------------status=Active, service=PPP, origin=Answer, category=ModemDS0 slot/port/ds1/chan=4/7/7/0, called=124, calling=(n/a)userid=as5300-ref2, ip=192.169.124.1, mask=255.255.255.0setup=06/22/2000 21:50:47, conn=6.77, phys=25.00, service=29.83, authen=29.83init rx/tx b-rate=33600/33600, rx/tx chars=0/0resource slot/port=3/3, mp bundle=0, charged units=0, account id=0idb handle=0x645B97CC, tty handle=0x622207BC, tcb handle=0x0----------------------------------------------------------------------------protocol: last=LAP-M, attempted=LAP-Mcompression: last=V.42bis-Both, supported= V.42bis-RX V.42bis-TXstandard: last=V.34+, attempted=V.21, initial=V.21snr=40 dB, sq=5, rx/tx level=-15/0 dBmphase jitter: freq=1 Hz, level=2 degreesfar end echo level=-90 dBm, freq offset=0 Hzphase roll=0 degrees, round-trip delay=0 msecsdigital pad=None dB, digital pad comp=0rbs pattern=0, constellation=0 pointrx/tx: symbol rate=3429/3429, carrier freq=1959/1959rx/tx: trellis code=0/0, preemphasis index=0/0rx/tx: constellation shape=Off/Off, nonlinear encode=Off/Offrx/tx: precode=Off/Off, xmit level reduct=0/0 dBmrx/tx: chars=0/0, general info=0x0rx/tx: link layer chars=0/0, NAKs=0/0error corrected: rx/tx=0/0, rx bad=0ec retransmissions=0, retransmitted frames=0rx/tx ppp slip=0/0, bad ppp slip=0rx/tx b-rate: last=33600/33600, lowest=0/0, highest=0/0phase 2 projected max rx b-rate: client=0, host=33600phase 4 desired rx/tx b-rate: client=16384/25987, host=25987/42765retrains: local=0, remote=0, failed=0speedshift: local up/down=0/0, remote up/down=0/0, failed=0v110: rx good=0, rx bad=0, tx=0, sync lost=0SS7/COT status=0x00v90: status=(Invalid #141), client=(n/a), failure=Nonerx/tx: max neg I frame=128/128, neg window=0/128v42bis size: dictionary=0, string=16T401 timeouts=0, tx window closures=0, rx overruns=0test err=0, reset=0, v0 synch loss=0mail lost: host=0, sp=0duration(sec)=0, disc reason=0x0disc text=(n/a)--------5---------10--------15--------20--------25--------30line shape : 0x0000000000000000000000000000000000000000000000000000v8bis capab : 0x12C9808081C609B502009481834347CB000000000000v8bis mod sl: 0x00000000000000000000000000000000000000000000v8 jnt menu : 0xC16513942A8D00000000000000000000000000000000v8 call menu: 0x00C16513942A00000000000000000000000000000000v90 training: 0x00000000v90 sgn ptrn: 0x00000000state trnsn : 0x0F0F010203041013151920FF0000000000000000000000000000000000000000portwre diag: 0x00000000000000000000000000000000phase 2 info: 0x0200EFF41F120000003CEFF41F0200E001EFB4014082050B0834702000011EEFB41440E1050008FCA707A707650D00000000000000000000phase 4 info: 0x0DA70D65836583400040----------------------------------------------------------------------------show port modem log
To display the events generated by the modem sessions, use the show port modem log EXEC command.
Cisco AS5400 and Cisco AS5850
show port modem log [reverse slot/port] [slot | slot/port]
Cisco AS5800
show port modem log [reverse shelf/slot/port] [shelf/slot | shelf/slot/port]
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Usage Guidelines
The port modem test log displays the results of the SPE diagnostics tests.
Examples
The following example shows output for the Cisco AS5400 with universal port card. This example shows the port history event log for slot 5, port 47:
Router# show port modem log 5/47Port 5/47 Events LogService type: DATA_FAX_MODEMService mode: DATA_FAX_MODEMSession State: IDLE00:02:23: incoming called number: 35160Service type: DATA_FAX_MODEMService mode: DATA_FAX_MODEMSession State: IDLEService type: DATA_FAX_MODEMService mode: DATA_FAX_MODEMSession State: ACTIVE00:02:23: Modem State event:State: Connect00:02:16: Modem State event:State: Link00:02:13: Modem State event:State: Train Up00:02:05: Modem State event:State: EC Negotiating00:02:05: Modem State event:State: Steady00:02:05: Modem Static event:Connect Protocol : LAP-MCompression : V.42bisConnected Standard : V.34+TX,RX Symbol Rate : 3429, 3429TX,RX Carrier Frequency : 1959, 1959TX,RX Trellis Coding : 16/16Frequency Offset : 0 HzRound Trip Delay : 0 msecsTX,RX Bit Rate : 33600, 33600Robbed Bit Signalling (RBS) pattern : 0Digital Pad : NoneDigital Pad Compensation : None4 bytes of link info not formatted : 0x00 0x00 0x00 0x00 0x0000:02:06:Modem Dynamic event:Sq Value : 5Signal Noise Ratio : 40 dBReceive Level : -12 dBmPhase Jitter Frequency : 0 HzPhase Jitter Level : 2 degreesFar End Echo Level : -90 dBmPhase Roll : 0 degreesTotal Retrains : 0EC Retransmission Count : 0Characters transmitted, received : 0, 0Characters received BAD : 0PPP/SLIP packets transmitted, received : 0, 0PPP/SLIP packets received (BAD/ABORTED) : 0EC packets transmitted, received OK : 0, 0EC packets (Received BAD/ABORTED) : 0
This following example shows the port history event log with the most recent event first on slot 5, port 40:
Router# show port modem log reverse 5/40Modem port 5/40 Events Log00:02:18:Modem Dynamic event:Sq Value : 5Signal Noise Ratio : 38 dBReceive Level : -12 dBmPhase Jitter Frequency : 0 HzPhase Jitter Level : 0 degreesFar End Echo Level : 0 dBmPhase Roll : 0 degreesTotal Retrains : 0EC Retransmission Count : 0Characters transmitted, received : 0, 0Characters received BAD : 0PPP/SLIP packets transmitted, received : 0, 0PPP/SLIP packets received (BAD/ABORTED) : 0EC packets transmitted, received OK : 0, 0EC packets (Received BAD/ABORTED) : 000:02:18: Modem Static event:Connect Protocol : LAP-MCompression : V.42bisConnected Standard : V.90TX,RX Symbol Rate : 8000, 3200TX,RX Carrier Frequency : 1829, 1829TX,RX Trellis Coding : 16/16Frequency Offset : 0 HzRound Trip Delay : 4 msecsTX,RX Bit Rate : 52000, 28800Robbed Bit Signalling (RBS) pattern : 255Digital Pad : NoneDigital Pad Compensation : Enabled4 bytes of link info not formatted : 0x00 0x00 0x00 0x00 0x0000:02:23: Modem State event:State: Steady00:02:23: Modem State event:State: EC Negotiating00:02:36: Modem State event:State: Train Up00:02:39: Modem State event:State: Link00:02:46: Modem State event:State: Connect00:02:46: Port State Reached:Service type: DATA_FAX_MODEMService mode: DATA_FAX_MODEMSession State: ACTIVE00:02:46: Port State Reached:Service type: DATA_FAX_MODEMService mode: DATA_FAX_MODEMSession State: IDLE00:02:47: incoming called number: 600000:02:47: incoming caller number: 90002The following example shows output for the Cisco AS5800 with universal port card. This example shows the port history event log for slot 8, ports 0 to 6:
Router# show port modem log 1/8/0 1/8/6Port 1/08/00 Events Log09:09:53: Service Type: DATA_FAX_MODEM09:09:53: Service Mode: DATA_FAX_MODEM09:09:53: Session State: FLUSHING09:09:53: Service Type: DATA_FAX_MODEM09:09:53: Service Mode: DATA_FAX_MODEM09:09:53: Session State: IDLE09:09:53: Modem State event:State: Terminate09:09:53: Modem End Connect event:Call Timer : 26 secsDisconnect Reason Info : 0x1F00Type (=0 ): <unknown>Class (=31 ): Requested by hostReason (=0 ): non-specific host disconnectTotal Retrains : 0EC Retransmission Count : 0Characters transmitted, received : 2633, 485Characters received BAD : 0PPP/SLIP packets transmitted, received : 0, 0PPP/SLIP packets received (BAD/ABORTED) : 0EC packets transmitted, received OK : 27, 21EC packets (Received BAD/ABORTED) : 009:09:54:Modem Link Rate event:09:09:55: Service Type: DATA_FAX_MODEM09:09:55: Service Mode: DATA_FAX_MODEM09:09:55: Session State: IDLE09:09:55: Service Type: DATA_FAX_MODEM09:09:55: Service Mode: DATA_FAX_MODEM09:09:55: Session State: ACTIVE09:09:55: Modem State event:State: Connect09:09:55: Modem State event:State: Link09:09:55: Modem State event:State: Train Up09:09:55: Modem State event:State: EC Negotiating09:09:55: Modem State event:State: Steady09:09:55: Modem Static event:Connect Protocol : LAP-MCompression : V.42bisConnected Standard : V.34+TX,RX Symbol Rate : 3429, 3429TX,RX Carrier Frequency : 1959, 1959TX,RX Trellis Coding : 16/16Frequency Offset : 0 HzRound Trip Delay : 1 msecsTX,RX Bit Rate : 31200, 28800Robbed Bit Signalling (RBS) pattern : 0Digital Pad : NoneDigital Pad Compensation : None4 bytes of link info not formatted : 0x00 0x00 0x00 0x00 0x0009:09:56: Modem Dynamic event:Sq Value : 5Signal Noise Ratio : 38 dBReceive Level : -15 dBmPhase Jitter Frequency : 13 HzPhase Jitter Level : 0 degreesFar End Echo Level : -90 dBmPhase Roll : 0 degreesTotal Retrains : 0EC Retransmission Count : 0Characters transmitted, received : 0, 0Characters received BAD : 0PPP/SLIP packets transmitted, received : 0, 0PPP/SLIP packets received (BAD/ABORTED) : 0EC packets transmitted, received OK : 0, 0EC packets (Received BAD/ABORTED) : 009:09:58: Service Type: DATA_FAX_MODEM09:09:58: Service Mode: DATA_FAX_MODEM09:09:58: Session State: FLUSHING09:09:58: Service Type: DATA_FAX_MODEM09:09:58: Service Mode: DATA_FAX_MODEM09:09:58: Session State: IDLE09:09:58: Modem State event:State: Terminate...Related Commands
show port modem test
To display the port modem test results, use the show port modem test EXEC command.
Cisco AS5400 and Cisco AS5850
show port modem test [slot | slot/port]
Cisco AS5800
show port modem test [shelf/slot | shelf/slot/port]
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Usage Guidelines
The port modem test log displays the results of the SPE diagnostics tests.
Examples
The following example shows output for the Cisco AS5400 with universal port card. This example displays the results of the SPE startup test, SPE auto-test, and SPE back-to-back test.
Note
Router# show port modem testDate Time Modem Test Reason State Result3/02 12:00:57 PM 2/01 Back-To-Back :STARTUP TEST Idle PASS3/02 12:00:57 PM 2/00 Back-To-Back :STARTUP TEST Idle PASS3/02 12:00:58 PM 2/02 Back-To-Back :STARTUP TEST Idle PASS3/02 12:00:58 PM 2/03 Back-To-Back :STARTUP TEST Idle PASS3/02 12:00:58 PM 2/04 Back-To-Back :STARTUP TEST Idle PASS3/02 12:00:58 PM 2/05 Back-To-Back :STARTUP TEST Idle PASS...3/02 12:01:14 PM 3/95 Back-To-Back :STARTUP TEST Idle PASS3/02 12:01:14 PM 3/94 Back-To-Back :STARTUP TEST Idle PASS3/02 12:01:15 PM 3/75 Back-To-Back :STARTUP TEST Idle PASS3/02 12:01:15 PM 3/74 Back-To-Back :STARTUP TEST Idle PASS3/02 12:13:52 PM 3/20 Back-To-Back :USER INITIATED Idle PASS3/02 12:13:52 PM 2/10 Back-To-Back :USER INITIATED Idle PASS...3/02 12:44:00 PM 3/102 No Test (Time) :MIN IDLE MODEMS Idle NOTST3/02 12:44:00 PM 3/103 No Test (Time) :MIN IDLE MODEMS Idle NOTST3/02 12:44:00 PM 3/104 No Test (Time) :MIN IDLE MODEMS Idle NOTST3/02 12:44:00 PM 3/105 No Test (Time) :MIN IDLE MODEMS Idle NOTST3/02 12:44:00 PM 3/106 No Test (Time) :MIN IDLE MODEMS Idle NOTST3/02 12:44:00 PM 3/107 No Test (Time) :MIN IDLE MODEMS Idle NOTST3/02 12:44:21 PM 2/73 Back-To-Back :TIME INTERVAL Idle PASS3/02 12:44:21 PM 2/72 Back-To-Back :TIME INTERVAL Idle PASS3/02 12:44:21 PM 2/33 Back-To-Back :TIME INTERVAL Idle PASS3/02 12:44:21 PM 2/32 Back-To-Back :TIME INTERVAL Idle PASS3/02 12:44:21 PM 3/37 Back-To-Back :TIME INTERVAL Idle PASSRelated Commands
show port operational-status
To display the active session's statistics, use the show port operational-status EXEC command.
Cisco AS5400 and Cisco AS5850
show port operational-status {slot | slot/port}
Cisco AS5800
show port operational-status {shelf/slot | shelf/slot/port}
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Usage Guidelines
This command displays the operational status of a specific port or range of ports. The port should have an associated active session when the command is entered.
Examples
The following example shows output from the show port operational-status command on the Cisco AS5400 with universal port card. This example displays operational status for slot 2, SPE 0, port 1:
Router# show port operational-status 2/1slot/spe/Port -- 2/0/1Service Type :Modem serviceDisconnect Reason Info :0x0Type (=0 ): unknownClass (=0 ): OtherReason (=0 ): no disconnect has yet occurredModulation Standard :V.34+TX/RX Bit Rate :31200/14400Connect Protocol :LAP-MCompression :V.42bisCall Timer :47 secsLink Signal Quality :7SNR :37 dBTX/RX Symbol Rate :3429/3429TX/RX Carrier Frequency :1959/1959TX/RX Trellis Coding :16/16TX/RX Preemphasis Index :0/1TX/RX Constellation Shaping :On-Active/On-ActiveTX/RX Nonlinear Encoding :On-Active/On-ActiveTX/RX Precoding :On-Active/On-ActiveTX/RX Xmit Level Reduction :3/1 dBmReceive Level :-15 dBmFrequency Offset :0 HzPhase Jitter Frequency :2 HzPhase Jitter Level :2 degreesFar End Echo Level :-90 dBmPhase Roll :0 degreesRound Trip Delay :0 msecs>Total Retrains :0Self Test Error count :0EC Retransmission count :0EC packets transmitted/received OK :11/12EC packets (Received BAD/ABORTED) :0Characters transmitted/received :76/13Characters received BAD :0PPP/SLIP packets transmitted/received :0/0PPP/SLIP packets received (BAD/ABORTED) :0RBS Pattern :0Digital Pad :0Digital Pad Compensation :0
The following example displays operational status for a V.110 digital service for the Cisco AS5400 on slot 2, SPE 3, port 23:
Router# show port operational-status 2/23slot/spe/Port -- 2/3/23Service Type : Digital serviceConnect Protocol : V110Data Bits : 8Parity : 0Stop Bits : 1TX/RX Bit Rate : 19200/19200Call Timer : 116 secsEC packets transmitted/received OK : 0/0EC packets (Received BAD/ABORTED) : 0PPP/SLIP packets transmitted, received : 8/8PPP/SLIP packets received (BAD/ABORTED) : 0Sync Loss : 0The following example shows the show port operational-status command for the Cisco AS5800 on shelf 1, slot 8:
Router# show port operational-status 1/8Shelf/Slot/SPE/Port -- 1/8/32/194Service Type : Modem serviceDisconnect Reason Info : 0x0Type (=0 ): <unknown>Class (=0 ): OtherReason (=0 ): no disconnect has yet occurredModulation Standard : V.34+TX/RX Bit Rate : 31200/31200Connect Protocol : LAP-MCompression : V.42bisCall Timer : 18 secsLink Signal Quality : 6SNR : 38 dBTX/RX Symbol Rate : 3429/3429TX/RX Carrier Frequency : 1959/1959TX/RX Trellis Coding : 16/16TX/RX Preemphasis Index : 0/1TX/RX Constellation Shaping : Off-None/On-ActiveTX/RX Nonlinear Encoding : Off-None/On-ActiveTX/RX Precoding : Off-None/On-ActiveTX/RX Xmit Level Reduction : 6/5 dBmReceive Level : -15 dBmFrequency Offset : 0 HzPhase Jitter Frequency : 5 HzPhase Jitter Level : 2 degreesFar End Echo Level : -90 dBmPhase Roll : 0 degreesRound Trip Delay : 1 msecsTotal Retrains : 0Self Test Error count : 0EC Retransmission count : 1EC packets transmitted/received OK : 34/14EC packets (Received BAD/ABORTED) : 0Characters transmitted/received : 9393/355Characters received BAD : 0PPP/SLIP packets transmitted/received : 0/0PPP/SLIP packets received (BAD/ABORTED) : 0RBS Pattern : 0Digital Pad : 0Digital Pad Compensation : 0...
Related Commands
show spe
To show service processing element (SPE) status, use the show spe EXEC command.
Cisco AS5400 and Cisco AS5850
show spe [slot | slot/spe]
Cisco AS5800
show spe [shelf/slot | shelf/slot/spe]
Syntax Descriptions
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Usage Guidelines
Use the show spe command to display status and history statistics of all SPEs, a specified SPE, or the specified range of SPEs.
Examples
The following example displays history statistics for all SPEs after a busyout was run on SPE 2/0 and a shutdown was run on SPE 2/1 on the Cisco AS5400:
Router# show speSPE settings:==============Country code configuration: default T1 (u Law)Polling interval: 12 secs.History log events: 50(per port)Port legends:============Port state: (s)shutdown (t)test (r)recovery (d)download(b)busiedout (p)busyout pending, (B)bad (a)active callCall Type: (m)modem (d)digital (_)not in useSPE SPE SPE SPE Port CallSPE# Port # State Busyout Shut Crash State Type2/00 0000-0005 ACTIVE 0 0 0 aaaaaa dddddd2/01 0006-0011 ACTIVE 0 0 0 aaaaaa dddddd2/02 0012-0017 ACTIVE 0 0 0 aaaaaa dddddd2/03 0018-0023 ACTIVE 0 0 0 aaaaaa dddmdm2/04 0024-0029 ACTIVE 0 0 0 aaaaaa dmmmmm2/05 0030-0035 ACTIVE 0 0 0 aaa_aa mmm_mm2/06 0036-0041 ACTIVE 0 0 0 __aaaa __mmmm2/07 0042-0047 ACTIVE 0 0 0 aaa_aa mmm_mm2/08 0048-0053 ACTIVE 0 0 0 _aaa_a _mmm_m2/09 0054-0059 ACTIVE 0 0 0 _aa_aa _md_mm2/10 0060-0065 ACTIVE 0 0 0 _a_a_a _m_m_m2/11 0066-0071 ACTIVE 0 0 0 _a_aaa _d_mmd2/12 0072-0077 ACTIVE 0 0 0 aaaaaa mdmmmd2/13 0078-0083 ACTIVE 0 0 0 _aaaaa _dmmdm2/14 0084-0089 ACTIVE 0 0 0 _a_aaa _m_ddd2/15 0090-0095 ACTIVE 0 0 0 a_aaaa m_dddd2/16 0096-0101 ACTIVE 0 0 0 aaaaaa ddddmd2/17 0102-0107 ACTIVE 0 0 0 aaaaaa dddddd
The following example shows output for the show spe command on the Cisco AS5800 with one universal port card:
Router# show speSPE settings==============Country code configuration default T1 (u Law)Polling interval 12 secs.History log events 50(per port)Port legends============Port state (s)shutdown (t)test (r)recovery (d)download(b)busiedout (p)busyout pending, (B)bad (a)active callCall type (m)modem (d)digital (_)not in useSPE SPE SPE SPE Port CallSPE# Port # State Busyout Shut Crash State Type1/02/00 0000-0005 ACTIVE 0 0 0 a_a_a_ m_m_m_1/02/01 0006-0011 ACTIVE 0 0 0 aaa___ mmm___1/02/02 0012-0017 ACTIVE 0 0 0 _a_aa_ _m_mm_1/02/03 0018-0023 ACTIVE 0 0 0 _aaaaa _mmmmm1/02/04 0024-0029 ACTIVE 0 0 0 a_a_a_ m_m_m_1/02/05 0030-0035 ACTIVE 0 0 0 ____a_ ____m_1/02/06 0036-0041 ACTIVE 0 0 0 _aaa_a _mmm_m1/02/07 0042-0047 ACTIVE 0 0 0 a_____ m_____1/02/08 0048-0053 ACTIVE 0 0 0 _aa_aa _mm_mm1/02/09 0054-0059 ACTIVE 0 0 0 _aa_aa _mm_mm1/02/10 0060-0065 ACTIVE 0 0 0 _a_a_a _m_m_m1/02/11 0066-0071 ACTIVE 0 0 0 a__aa_ m__mm_1/02/12 0072-0077 ACTIVE 0 0 0 aaa___ mmm___1/02/13 0078-0083 ACTIVE 0 0 0 aaaa_a mmmm_m1/02/14 0084-0089 ACTIVE 0 0 0 _aaa__ _mmm__1/02/15 0090-0095 ACTIVE 0 0 0 a__aaa m__mmm1/02/16 0096-0101 ACTIVE 0 0 0 _aaaa_ _mmmm_1/02/17 0102-0107 ACTIVE 0 0 0 _aaa_a _mmm_m1/02/18 0108-0113 ACTIVE 1 0 0 _aaaaa _mmmmm1/02/19 0114-0119 ACTIVE 1 0 0 aa_aa_ mm_mm_1/02/20 0120-0125 ACTIVE 1 0 0 aa__aa mm__mm1/02/21 0126-0131 ACTIVE 1 0 0 aaa_aa mmm_mm1/02/22 0132-0137 ACTIVE 1 0 0 _a____ _m____1/02/23 0138-0143 ACTIVE 1 0 0 a__aaa m__mmm1/02/24 0144-0149 ACTIVE 1 0 0 a_a_aa m_m_mm1/02/25 0150-0155 ACTIVE 1 0 0 ___aaa ___mmm1/02/26 0156-0161 ACTIVE 1 0 0 a_a__a m_m__m1/02/27 0162-0167 ACTIVE 1 0 0 a_a_aa m_m_mm1/02/28 0168-0173 ACTIVE 1 0 0 a___aa m___mm1/02/29 0174-0179 ACTIVE 1 0 0 _a____ _m____1/02/30 0180-0185 ACTIVE 1 0 0 _aaaaa _mmmmm1/02/31 0186-0191 ACTIVE 1 0 0 _a_aa_ _m_mm_1/02/32 0192-0197 ACTIVE 1 0 0 aaa__a mmm__m1/02/33 0198-0203 ACTIVE 1 0 0 a_a__a m_m__m1/02/34 0204-0209 ACTIVE 1 0 0 aaaaaa mmmmmm1/02/35 0210-0215 ACTIVE 1 0 0 _aa__a _mm__m1/02/36 0216-0221 ACTIVE 0 0 0 a_a_aa m_m_mm1/02/37 0222-0227 ACTIVE 0 0 0 a_aaaa m_mmmm1/02/38 0228-0233 ACTIVE 0 0 0 aaaaaa mmmmmm1/02/39 0234-0239 ACTIVE 0 0 0 aa_aa_ mm_mm_1/02/40 0240-0245 ACTIVE 0 0 0 aa_aaa mm_mmm1/02/41 0246-0251 ACTIVE 0 0 0 a__a__ m__m__1/02/42 0252-0257 ACTIVE 0 0 0 aa__aa mm__mm1/02/43 0258-0263 ACTIVE 0 0 0 aaa_aa mmm_mm1/02/44 0264-0269 ACTIVE 0 0 0 aaaa_a mmmm_m1/02/45 0270-0275 ACTIVE 0 0 0 aaa_a_ mmm_m_1/02/46 0276-0281 ACTIVE 0 0 0 aaaaa_ mmmmm_1/02/47 0282-0287 ACTIVE 0 0 0 _aaaa_ _mmmm_1/02/48 0288-0293 ACTIVE 0 0 0 a_aa_a m_mm_m1/02/49 0294-0299 ACTIVE 0 0 0 aa_a_a mm_m_m1/02/50 0300-0305 ACTIVE 0 0 0 aa_aaa mm_mmm1/02/51 0306-0311 ACTIVE 0 0 0 aaaaa_ mmmmm_1/02/52 0312-0317 ACTIVE 0 0 0 aaaaaa mmmmmm1/02/53 0318-0323 ACTIVE 0 0 0 aaaa_a mmmm_mRelated Commands
show spe digital
To display digital history statistics of all service processing elements (SPEs) for digital service, in summary form or for SPEs starting with a specified slot or a specified shelf/slot/range of SPEs, use the show spe digital EXEC command.
Cisco AS5400 and Cisco AS5850
show spe digital [slot | slot/spe]
Note
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
12.1(1)XD
This command was introduced on the Cisco AS5400.
12.1(3)T
This command was supported on the Cisco AS5400.
12.1(5)XV
This command was supported on the Cisco AS5850.
Usage Guidelines
The show spe digital command displays history statistics of all digital SPEs, in summary form or for SPEs starting with a specified slot, or a specified shelf/slot/range of SPEs.
Examples
The following example shows output for the show spe digital command on the Cisco AS5400 with universal port card. This example shows statistics for slot 5, SPE 4:
Router# show spe digital 5/4#SPE 5/04Cisco Universal SPE; Fw: 0.06.07.03; Async5/24 - 5/29, TTY672 - 677Last clearing of statistics counters : never11 incoming completes 24 incoming failures0 outgoing completes 0 outgoing failures0 failed dial attempts 0 ring no answers0 no dial tones 0 link failures0 watchdog timeouts 0 protocol errors0 dial timeouts
Related Commands
show spe digital active
To display active digital calls and digital statistics of all service processing elements (SPEs), a specified SPE, or the specified range of SPEs, use the show spe digital active EXEC command.
Cisco AS5400 and Cisco AS5850
show spe digital active [slot | slot/spe]
Note
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
12.1(1)XD
This command was introduced on the Cisco AS5400.
12.1(3)T
This command was supported on the Cisco AS5400
12.1(5)XV
This command was supported on the Cisco AS5850.
Usage Guidelines
The show spe digital active command displays active digital calls and digital statistics of all SPEs, a specified SPE, or the specified range of SPEs.
Examples
The following example shows output for the show spe digital active command on the Cisco AS5400 with universal port card. This example displays active digital statistics for slot 5, SPE 6:
Router# show spe digital active 5SPE 5/06Char SyncPort Prot Duration Tx/Rx Cfg Loss41 V.110 188 19200/19200 In 0SPE 5/09Char SyncPort Prot Duration Tx/Rx Cfg Loss54 V.110 187 19200/19200 In 056 V.110 187 19200/19200 In 057 V.110 188 19200/19200 In 0...
Related Commands
show spe digital csr
To display digital calls success rate (CSR) statistics of all service processing elements (SPEs), a specified SPE, or the specified range of SPEs, use the show spe digital csr EXEC command.
Cisco AS5400 and Cisco AS5850
show spe digital csr [summary | slot | slot/spe]
Note
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
12.1(1)XD
This command was introduced on the Cisco AS5400.
12.1(3)T
This command was supported on the Cisco AS5400.
12.1(5)XV
This command was supported on the Cisco AS5850.
Usage Guidelines
The show spe digital csr command displays digital calls success rate (CSR) statistics of all SPEs, a specified SPE, or the specified range of SPEs.
Examples
The following example shows output for the show spe digital csr command on the Cisco AS5400 with universal port card. This example displays the number of call success rate counters for slot 5:
Router# show spe digital csr 5Avg Hold Inc calls Out calls Failed No SuccSPE Time Succ Fail Succ Fail Dial Answer Pct5/00 00:04:22 6 0 0 0 0 0 100%5/01 00:04:22 6 0 0 0 0 0 100%5/02 00:04:22 6 0 0 0 0 0 100%5/03 00:04:22 6 0 0 0 0 0 100%5/04 00:04:22 6 0 0 0 0 0 100%5/05 00:04:21 6 0 0 0 0 0 100%5/06 00:04:22 4 0 0 0 0 0 100%5/07 00:04:22 1 0 0 0 0 0 100%5/08 00:04:21 6 0 0 0 0 0 100%5/09 00:04:23 5 0 0 0 0 0 100%5/10 00:00:00 0 0 0 0 0 0 0%5/11 00:04:21 5 0 0 0 0 0 100%5/12 00:04:20 2 0 0 0 0 0 100%5/13 00:00:00 0 0 0 0 0 0 0%5/14 00:00:00 0 0 0 0 0 0 0%5/15 00:00:00 0 0 0 0 0 0 0%5/16 00:00:00 0 0 0 0 0 0 0%5/17 00:00:00 0 0 0 0 0 0 0%
Related Commands
show spe digital disconnect-reason
To display the local disconnect reasons for all digital calls on the service processing elements (SPEs), a specified SPE, or the specified range of SPEs, use the show spe digital disconnect-reason EXEC command.
Cisco AS5400 and Cisco AS5850
show spe digital disconnect-reason [summary | slot | slot/spe]
Note
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
12.1(1)XD
This command was introduced on the Cisco AS5400.
12.1(3)T
This command was supported on the Cisco AS5400.
12.1(5)XV
This command was supported on the Cisco AS5850.
Usage Guidelines
The show spe digital disconnect-reason command displays the local disconnect reasons for all digital calls on the SPEs, a specified SPE, or the specified range of SPEs.
Examples
The following example shows output for the show spe digital disconnect-reason command on the Cisco AS5400 with universal port card. This example displays reasons for digital call disconnects on slot 5:
Router# show spe digital disconnect-reason 5#SPE 5/00 :=====CLASS HOST====== =====CLASS SERVICE=====NonSpecific 0 ATH 0Busy 0 Aborted 0No Answer 0 Connect Timeout 0DTR 0 Sync Loss 0ATH 0NoDialTone 0No Carrier 0ACK 0 TOTAL 0#SPE 5/03 :=====CLASS HOST====== =====CLASS SERVICE=====NonSpecific 0 ATH 0Busy 1 Aborted 0No Answer 0 Connect Timeout 0DTR 0 Sync Loss 0...Related Commands
show spe digital summary
To display summary history statistics of all service processing elements (SPEs), a specified SPE, or the specified range of SPEs, use the show spe digital summary EXEC command.
Cisco AS5400 and Cisco AS5850
show spe digital summary [slot | slot/spe]
Note
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
12.1(1)XD
This command was introduced on the Cisco AS5400.
12.1(3)T
This command was supported on the Cisco AS5400.
12.1(5)XV
This command was supported on the Cisco AS5850.
Usage Guidelines
The show spe digital summary command displays history statistics of all SPEs, a specified SPE, or the specified range of SPEs.
Examples
The following example shows output for the show spe digital summary command on the Cisco AS5400 with universal port card. This example displays active digital statistics for slot 5:
Router# show spe digital summary 5Async5/00 - 5/107, TTY648 - 755209 incoming completes 397 incoming failures0 outgoing completes 0 outgoing failures0 failed dial attempts 0 ring no answers0 no dial tones 0 link failures0 watchdog timeouts 0 protocol errors0 dial timeoutsRelated Commands
show spe log
To display the service processing element (SPE) system log, use the show spe log EXEC command.
Cisco AS5400 and Cisco AS5850
show spe log [reverse | slot]
Cisco AS5800
show spe log [reverse | shelf/slot]
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Usage Guidelines
The show spe log command displays the slot history event log.
Examples
The following example shows output for the show spe log command on the Cisco AS5400 with universal port card:
Router# show spe logSlot 3 Events Log2d15h : SPE State Event:Address: 0x3000000SPE : 3/00Command: SPE_IMMEDIATE_DISABLE Complete2d14h : SPE State Event:Address: 0x3000100SPE : 3/06Command: SPE_IMMEDIATE_DISABLE Complete2d13h : SPE State Event:Address: 0x3000200SPE : 3/12Command: SPE_IMMEDIATE_DISABLE Complete00:00:26: SPE State Event:Address: 0x3000001SPE : 3/01Command: SPE_IMMEDIATE_DISABLE CompleteSlot 4 Events Log2d13h : SPE State Event:Address: 0x4000000SPE : 4/00Command: SPE_IMMEDIATE_DISABLE CompleteSlot 7 Events Log2d15h : Diag Post event:Address : 0x7000204SPE : 7/16Result : SPE_POST_TEST_FAILEDTest ID : SPE_POWER_ON_SELF_TESTDiag Code : 0xFE01C004Data Format: ASCIIData Len : 0Related Commands
clear spe log
Clears all event entries in the slot history event log.
show spe log reverse
Displays the slot history event log, with most recent event first.
show spe modem
To display the modem service history statistics for specified service processing element (SPE), use the show spe modem EXEC command.
Cisco AS5400 and Cisco AS5850
show spe modem {slot | slot/spe}
Cisco AS5800
show spe modem {shelf/slot | shelf/slot/spe}
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Usage Guidelines
The show spe modem command displays the modem service history statistics for a specified SPE.
Examples
The following example shows output for the show spe modem command on the Cisco AS5800 with universal port card:Router# show spe modem 1/8/0#SPE 1/08/00Cisco Universal SPE; Fw: 0.00.06.81; Async1/8/00 - 1/8/05, TTY2916 - 2921Last clearing of statistics counters : never90 incoming completes 0 incoming failures0 outgoing completes 0 outgoing failures0 failed dial attempts 0 ring no answers 0 autotests0 no carriers 0 dial timeouts 0 autotest fails0 no dial tones 0 link failures 0 fail count0 watchdog timeouts 0 protocol errorsTransmit Speed Counters :Speed Calls Speed Calls Speed Calls Speed Calls Speed Calls60000 0 48000 0 38400 0 30666 0 12000 058000 0 46666 0 38000 0 29333 0 9600 056000 0 46000 0 37333 0 28800 0 7200 054666 0 45333 0 36000 0 28000 0 4800 054000 0 44000 0 34666 0 26400 0 2400 053333 0 42666 0 34000 0 24000 0 1200 052000 0 42000 0 33600 0 21600 0 300 050666 0 41333 0 33333 0 19200 050000 0 40000 0 32000 0 16800 049333 0 38666 0 31200 90 14400 0Receive Speed Counters :Speed Calls Speed Calls Speed Calls Speed Calls Speed Calls38400 0 26400 0 16800 0 7200 0 300 033600 11 24000 0 14400 0 4800 031200 25 21600 0 12000 0 2400 028800 54 19200 0 9600 0 1200 0Related Commands
show spe
Displays history statistics of all SPEs, a specified SPE, or the specified range of SPEs.
show spe modem active
To display modem service statistics of all active calls on specified service processing elements (SPEs), use the show spe modem active EXEC command.
Cisco AS5400 and Cisco AS5850
show spe modem active {slot | slot/spe}
Cisco AS5800
show spe modem active {shelf/slot | shelf/slot/spe}
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Examples
The following example shows output for the show spe modem active command on the Cisco AS5400 with universal port card. This example displays active modem statistics for slot 5, SPE 6:
Router# show spe modem active 5/6SPE 5/06Port Type Prot Comp Duration Tx/Rx Tx/Rx(Lvl) SNR Cfg Retrain37 V.90 LAP-M V.42bis 95 3890/76 --/-11 38 In 0The following example shows output for the show spe modem active command on the Cisco AS5800 with universal port card. This example displays active modem statistics for shelf 1, slot 8:
Router# show spe modem active 1/8SPE 1/08/34Port Type Prot Comp Duration Tx/Rx(bps) Tx/Rx(Lvl) SNR Cfg Retrain209 V.34+ LAP-M V.42bis 23 28800/31200 --/-13 37 In 0SPE 1/08/35Port Type Prot Comp Duration Tx/Rx(bps) Tx/Rx(Lvl) SNR Cfg Retrain215 V.34+ LAP-M V.42bis 12 28800/31200 --/-13 37 In 0SPE 1/08/36Port Type Prot Comp Duration Tx/Rx(bps) Tx/Rx(Lvl) SNR Cfg Retrain216 V.34+ LAP-M V.42bis 24 33600/31200 --/-36 38 In 0217 ## ## ## 0 33600/300 --/19 37 In 0218 ## ## ## 0 33600/300 --/19 37 In 0219 ## ## ## 0 33600/300 --/19 35 In 0ÿÿÿRelated Commands
show spe modem csr
To display the call success rate for the specified service processing elements (SPEs), use the show spe modem csr EXEC command.
Cisco AS5400 and Cisco AS5850
show spe modem csr {summary | slot | slot/spe}
Cisco AS5800
show spe modem csr {summary | shelf/slot | shelf/slot/spe}
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Usage Guidelines
The show spe modem csr command displays the modem call success rate statistics for a specific SPE, range of SPEs, or all SPEs. The summary keyword displays the call success rate statistics for all SPEs.
Examples
The following example shows output for the show spe modem csr command on the Cisco AS5400 with universal port card:
Router# show spe modem csr 5/6Avg Hold Inc calls Out calls Failed No SuccSPE Time Succ Fail Succ Fail Dial Answer Pct5/06 00:22:41 2 0 0 0 0 0 100%Router# show spe modem csr 5/1 5/6Avg Hold Inc calls Out calls Failed No SuccSPE Time Succ Fail Succ Fail Dial Answer Pct5/01 00:00:00 0 0 0 0 0 0 0%5/02 00:00:00 0 0 0 0 0 0 0%5/03 00:00:00 0 0 0 0 0 0 0%5/04 00:00:00 0 0 0 0 0 0 0%5/05 00:00:00 0 0 0 0 0 0 0%5/06 00:22:48 2 0 0 0 0 0 100%The following example shows output for the show spe modem csr summary command on the Cisco AS5800 with universal port card:
Router# show spe modem csr summaryAvg Hold Inc calls Out calls Failed No SuccTime Succ Fail Avail Succ Fail Avail Dial Answer Pct002631 4827 285 93 0 0 93 5 0 94%Related Commands
show spe modem disconnect-reason
To display all modem disconnect reasons for the specified service processing element (SPE), use the show spe modem disconnect-reason EXEC command.
Cisco AS5400 and Cisco AS5850
show spe modem disconnect-reason {summary | slot | slot/spe}
Cisco AS5800
show spe modem disconnect-reason {summary | shelf/slot | shelf/slot/spe}
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Usage Guidelines
Disconnect reasons explain why active calls are disconnected. The disconnect reasons are displayed with Class boundaries.
Examples
The following example shows output for the show spe modem disconnect-reason summary command on the Cisco AS5400 with universal port card:
Router# show spe modem disconnect-reason summary 5/6#SPE 5/06===CLASS OTHER==== =====CLASS DSP==== ===CLASS EC LCL=== ==CLASS EC FRMR===Software Rst 0 No Carrier 0 No LR 0 Frmr Bad Cmd 0EC Termntd 0 No ABT dtctd 0 LR Param1 0 Frmr Data 0Bad MNP5 Rx 0 Trainup flr 0 LR Incmpt 0 Frmr Length 0Bad V42B 0 Retrain Lt 0 Retrns Lt 0 Frmr Bad NR 0Bad COP stat 0 ABT end flr 0 Inactivity 0ATH 0 Protocol Err 0 ===CLASS EC LD====Aborted 0 ====CLASS HOST==== Fallbck Term 0 LD No LR 0Connect Tout 0 Hst NonSpec 0 No XID 0 LD LR Param1 0Reset DSP 0 Hst Busy 0 XID Incmpt 0 LD LR Incmpt 0Hst No answr 0 Disc 0 LD Retrns Lt 0===CLASS EC Cmd=== Hst DTR 1 DM 0 LD Inactivty 0Bad Cmd 0 Hst ATH 0 Bad NR 0 LD Protocol 0Hst NoDialTn 0 SABME Online 0 LD User 0=====N O N E====== Hst No Carr 0 XID Online 0None 0 Hst Ack 0 LR Online 0 TOTAL 1The following example shows the output for the show spe modem disconnect-reason command on the Cisco AS5800 with universal port card:
Router# show spe modem disconnect-reason===CLASS OTHER==== =====CLASS DSP==== ===CLASS EC LCL=== ==CLASS EC FRMR===Software Rst 0 No Carrier 21 No LR 0 Frmr Bad Cmd 0EC Termntd 0 No ABT dtctd 0 LR Param1 0 Frmr Data 0Bad MNP5 Rx 0 Trainup flr 26 LR Incmpt 0 Frmr Length 0Bad V42B 12 Retrain Lt 0 Retrns Lt 37 Frmr Bad NR 0Bad COP stat 0 ABT end flr 0 Inactivity 0ATH 0 Protocol Err 5 ===CLASS EC LD====Aborted 0 ====CLASS HOST==== Fallbck Term 22 LD No LR 0Connect Tout 11 Hst NonSpec 799 No XID 5 LD LR Param1 0Reset DSP 0 Hst Busy 0 XID Incmpt 0 LD LR Incmpt 0Hst No answr 0 Disc 2718 LD Retrns Lt 0===CLASS EC Cmd=== Hst DTR 870 DM 0 LD Inactivty 0Bad Cmd 0 Hst ATH 0 Bad NR 0 LD Protocol 0Hst NoDialTn 0 SABME Online 0 LD User 0=====N O N E====== Hst No Carr 0 XID Online 0None 29 Hst Ack 0 LR Online 0 TOTAL 4555Related Commands
show spe modem high speed
To display the the total number of connections negotiated within each modulation or coder-decoder (codec) for a specific range of service processing elements (SPEs), use the show spe modem high speed EXEC command.
Cisco AS5400 and Cisco AS5850
show spe modem high speed {summary | slot | slot/spe}
Cisco AS5800
show spe modem high speed {summary | shelf/slot | shelf/slot/spe}
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Examples
The following example shows output for the show spe modem high speed command on the Cisco AS5400 with universal port card:
Router# show spe modem high speed#SPE 1/0 :Modln V.FC V.34 K56Flex V.90 ModlnSpeed Tx Rx Tx Rx Tx Rx Tx Rx Speed56000 ------ ------ ------ ------ 000000 ------ 000000 ------ 5600054667 ------ ------ ------ ------ - - 0 - 5466754000 ------ ------ ------ ------ 0 - - - 5400053333 ------ ------ ------ ------ - - 0 - 5333352000 ------ ------ ------ ------ 0 - 0 - 5200050667 ------ ------ ------ ------ - - 0 - 5066750000 ------ ------ ------ ------ 0 - - - 5000049333 ------ ------ ------ ------ - - 0 - 4933348000 ------ ------ ------ ------ 0 - 0 - 4800046667 ------ ------ ------ ------ - - 0 - 4666746000 ------ ------ ------ ------ 0 - - - 4600045333 ------ ------ ------ ------ - - 0 - 4533344000 ------ ------ ------ ------ 0 - 0 - 4400042667 ------ ------ ------ ------ - - 0 - 4266742000 ------ ------ ------ ------ 0 - - - 4200041333 ------ ------ ------ ------ - - 0 - 4133340000 ------ ------ ------ ------ 0 - 0 - 4000038667 ------ ------ ------ ------ - - 0 - 4866738000 ------ ------ ------ ------ 0 - - - 3800037333 ------ ------ ------ ------ - - 0 - 3733336000 ------ ------ ------ ------ 0 - 0 - 3600034667 ------ ------ ------ ------ - - 0 - 3466734000 ------ ------ ------ ------ 0 - - - 3400033600 ------ ------ 0 0 - - - 0 3360033333 ------ ------ - - - - 0 - 3333332000 ------ ------ - - 0 - 0 - 3200031200 ------ ------ 0 0 - 0 - 0 3120030667 ------ ------ - - - - 0 - 3066729333 ------ ------ - - - - 0 - 2933328800 0 0 0 0 - 0 - 0 2880028000 - - - - - - 0 - 2800026400 0 0 0 0 - 0 - 0 2640024000 0 0 0 0 - 0 - 0 2400021600 0 0 0 0 - 0 - 0 2160019200 0 0 0 0 - 0 - 0 1920016800 0 0 0 0 - 0 - 0 1680014400 0 0 0 0 - 0 - 0 1440012000 - - 0 0 - 0 - 0 120009600 - - 0 0 - 0 - 0 96007200 - - 0 0 - 0 - 0 72004800 - - 0 0 - 0 - 0 48002400 - - 0 0 - - - - 2400TOTAL 0000000 0000000 0000000 0000000 TOTAL#SPE 1/1 :Modln V.FC V.34 K56Flex V.90 ModlnSpeed Tx Rx Tx Rx Tx Rx Tx Rx Speed56000 ------ ------ ------ ------ 000000 ------ 000000 ------ 5600054667 ------ ------ ------ ------ - - 0 - 5466754000 ------ ------ ------ ------ 0 - - - 5400053333 ------ ------ ------ ------ - - 0 - 5333352000 ------ ------ ------ ------ 0 - 0 - 5200050667 ------ ------ ------ ------ - - 0 - 5066750000 ------ ------ ------ ------ 0 - - - 5000049333 ------ ------ ------ ------ - - 0 - 4933348000 ------ ------ ------ ------ 0 - 0 - 4800046667 ------ ------ ------ ------ - - 0 - 4666746000 ------ ------ ------ ------ 0 - - - 4600045333 ------ ------ ------ ------ - - 0 - 4533344000 ------ ------ ------ ------ 0 - 0 - 4400042667 ------ ------ ------ ------ - - 0 - 4266742000 ------ ------ ------ ------ 0 - - - 4200041333 ------ ------ ------ ------ - - 0 - 4133340000 ------ ------ ------ ------ 0 - 0 - 4000038667 ------ ------ ------ ------ - - 0 - 4866738000 ------ ------ ------ ------ 0 - - - 3800037333 ------ ------ ------ ------ - - 0 - 3733336000 ------ ------ ------ ------ 0 - 0 - 3600034667 ------ ------ ------ ------ - - 0 - 3466734000 ------ ------ ------ ------ 0 - - - 3400033600 ------ ------ 0 0 - - - 0 3360033333 ------ ------ - - - - 0 - 3333332000 ------ ------ - - 0 - 0 - 3200031200 ------ ------ 0 0 - 0 - 0 3120030667 ------ ------ - - - - 0 - 3066729333 ------ ------ - - - - 0 - 2933328800 0 0 0 0 - 0 - 0 2880028000 - - - - - - 0 - 2800026400 0 0 0 0 - 0 - 0 2640024000 0 0 0 0 - 0 - 0 2400021600 0 0 0 0 - 0 - 0 2160019200 0 0 0 0 - 0 - 0 1920016800 0 0 0 0 - 0 - 0 1680014400 0 0 0 0 - 0 - 0 1440012000 - - 0 0 - 0 - 0 120009600 - - 0 0 - 0 - 0 96007200 - - 0 0 - 0 - 0 72004800 - - 0 0 - 0 - 0 48002400 - - 0 0 - - - - 2400TOTAL 0000000 0000000 0000000 0000000 TOTAL...The following example shows output for the show spe modem high speed command on the Cisco AS5800 with universal port card:
Router# show spe modem high speed 1/8/1-- Indicates an invalid speed for a standard#SPE 1/08/01 :Modln V.FC V.34 K56Flex V.90 ModlnSpeed Tx Rx Tx Rx Tx Rx Tx Rx Speed60000 ------ ------ ------ ------ 000000 ------ ------ ------ 6000058000 ------ ------ ------ ------ 0 ------ ------ ------ 5800056000 ------ ------ ------ ------ 0 - 0 - 5600054667 ------ ------ ------ ------ - - 0 - 5466754000 ------ ------ ------ ------ 0 - - - 5400053333 ------ ------ ------ ------ - - 0 - 5333352000 ------ ------ ------ ------ 0 - 0 - 5200050667 ------ ------ ------ ------ - - 0 - 5066750000 ------ ------ ------ ------ 0 - - - 5000049333 ------ ------ ------ ------ - - 0 - 4933348000 ------ ------ ------ ------ 0 - 0 - 4800046667 ------ ------ ------ ------ - - 0 - 4666746000 ------ ------ ------ ------ 0 - - - 4600045333 ------ ------ ------ ------ - - 0 - 4533344000 ------ ------ ------ ------ 0 - 0 - 4400042667 ------ ------ ------ ------ - - 0 - 4266742000 ------ ------ ------ ------ 0 - - - 4200041333 ------ ------ ------ ------ - - 0 - 4133340000 ------ ------ ------ ------ 0 - 0 - 4000038667 ------ ------ ------ ------ - - 0 - 3866738400 ------ ------ ------ ------ - - - - 3840038000 ------ ------ ------ ------ 0 - - - 3800037333 ------ ------ ------ ------ - - 0 - 3733336000 ------ ------ ------ ------ 0 - 0 - 3600034666 ------ ------ ------ ------ - - 0 - 3466634000 ------ ------ ------ ------ 0 - - - 3400033600 ------ ------ 0 1 - - - 0 3360033333 ------ ------ - - - - 0 - 3333332000 ------ ------ - - 0 - 0 - 3200031200 ------ ------ 6 1 - 0 - 0 3120030667 ------ ------ - - - - 0 - 3066729333 ------ ------ - - - - 0 - 2933328800 0 0 0 4 - 0 - 0 2880028000 - - - - - - 0 - 2800026400 0 0 0 0 - 0 - 0 2640024000 0 0 0 0 - 0 - 0 2400021600 0 0 0 0 - 0 - 0 2160019200 0 0 0 0 - 0 - 0 1920016800 0 0 0 0 - 0 - 0 1680014400 0 0 0 0 - 0 - 0 1440012000 - - 0 0 - 0 - 0 120009600 - - 0 0 - 0 - 0 96007200 - - 0 0 - 0 - 0 72004800 - - 0 0 - 0 - 0 48002400 - - 0 0 - - - - 2400TOTAL 0000000 0000012 0000000 0000000Related Commands
show spe modem low speed
Displays the connect-speeds within each low-speed modulation or codec for the specified service processing elements (SPEs).
show spe modem high standard
To display the total number of connections negotiated within each high modulation or codec for a specific range of service processing element (SPE), use the show spe modem high standard EXEC command.
Cisco AS5400 and Cisco AS5850
show spe modem high standard {summary | slot | slot/spe}
Cisco AS5800
show spe modem high standard {summary | shelf/slot | shelf/slot/spe}
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Examples
The following example shows output for the show spe modem high standard command on the Cisco AS5400 with universal port card. This example displays standard high-speed connections for SPEs in slot 5:Router# show spe modem high standard 5SPE/Mod-> V.FC V.34 K56Flex V.905/00 0 1 2 15/01 0 0 0 05/02 0 0 0 05/03 0 0 0 05/04 0 0 0 05/05 0 0 0 05/06 0 0 0 25/07 0 0 0 05/08 0 0 0 05/09 0 0 0 05/10 0 0 0 05/11 0 0 0 05/12 0 0 0 05/13 0 0 0 05/14 0 0 0 05/15 0 0 0 05/16 0 0 0 05/17 0 0 0 0TOTAL 00000000 00000001 00000002 00000003The following example shows output for the show spe modem high standard command on the Cisco AS5800 with universal port card. This example displays standard high-speed connections for SPEs in slot 8:Router# show spe modem high standard 1/8/1SPE/Mod-> V.FC V.34 K56Flex V.901/08/01 0 6 0 0TOTAL 00000000 00000006 00000000 00000000Related CommandsTOTAL 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000
show spe modem low standard
Displays the connect-speeds within each low-speed modulation or codec for the SPEs.
show spe modem low speed
To display the connect-speeds within each low-speed modulation or codec for the specified service processing elements (SPEs), use the show spe modem low speed EXEC command.
Cisco AS5400 and Cisco AS5850
show spe modem low speed {summary | slot | slot/spe}
Cisco AS5800
show spe modem low speed {summary | shelf/slot | shelf/slot/spe}
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Examples
The following example shows output for the show spe modem low speed command on the Cisco AS5400 with universal port card. This example displays standard low-speed connections:Router# show spe modem low speed#SPE 1/0 : <-- MODEM FAX -->Speed B103 V.21 B212 V.22 V.22b V.32 V.32b V.27t V.29 V.1714400 ------ ------ ------ ------ ------ ------ 30 ------ ------ 012000 ------ ------ ------ ------ ------ ------ 0 ------ ------ 09600 ------ ------ ------ ------ ------ 0 0 ------ 0 07200 ------ ------ ------ ------ ------ - 0 ------ 0 04800 ------ ------ ------ ------ ------ 0 0 0 0 ------2400 ------ ------ ------ ------ 0 ------ ------ 0 ------ ------1200 ------ ------ 0 0 6 ------ ------ ------ ------ ------600 ------ ------ ------ ------ ------ ------ ------ ------ ------ ------300 0 0 ------ ------ ------ ------ ------ ------ ------ ------TOTAL 000000 000000 000000 000000 000006 000000 000030 000000 000000 000000#SPE 1/1 : <-- MODEM FAX -->Speed B103 V.21 B212 V.22 V.22b V.32 V.32b V.27t V.29 V.1714400 ------ ------ ------ ------ ------ ------ 30 ------ ------ 012000 ------ ------ ------ ------ ------ ------ 0 ------ ------ 09600 ------ ------ ------ ------ ------ 0 0 ------ 0 07200 ------ ------ ------ ------ ------ - 0 ------ 0 04800 ------ ------ ------ ------ ------ 0 0 0 0 ------2400 ------ ------ ------ ------ 0 ------ ------ 0 ------ ------1200 ------ ------ 0 0 6 ------ ------ ------ ------ ------600 ------ ------ ------ ------ ------ ------ ------ ------ ------ ------300 0 0 ------ ------ ------ ------ ------ ------ ------ ------TOTAL 000000 000000 000000 000000 000006 000000 000030 000000 000000 000000...The following example shows output for the show spe modem low speed command on the Cisco AS5800 with universal port card. This example displays standard low-speed connections for SPEs in slot 8:
Router# show spe modem low speed 1/8/0 1/8/6-- Indicates an invalid speed for a standard#SPE 1/08/00 : <-- MODEM FAX -->Speed B103 V.21 B212 V.22 V.22b V.23 V.32 V.32b V.27t V.29 V.1714400 ----- ----- ----- ----- ----- ----- ----- 0 ----- ----- 012000 ----- ----- ----- ----- ----- ----- ----- 0 ----- ----- 09600 ----- ----- ----- ----- ----- ----- 0 0 ----- 0 07200 ----- ----- ----- ----- ----- ----- - 0 ----- 0 04800 ----- ----- ----- ----- ----- ----- 0 0 0 0 -----2400 ----- ----- ----- ----- 0 ----- ----- ----- 0 ----- -----1200 ----- ----- 0 0 0 0 ----- ----- ----- ----- -----300 0 0 ----- ----- ----- ----- ----- ----- ----- ----- -----TOTAL 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000#SPE 1/08/01...Related Commands
show spe modem high speed
Displays the total number of connections within each modulization or codec for a specific range of service processing elements (SPEs).
show spe modem low standard
To display the total number of connections negotiated within each low modulation or codec for the specified service processing elements (SPEs), use the show spe modem low standard EXEC command.
Cisco AS5400 and Cisco AS5850
show spe modem low standard {summary | slot | slot/spe}
Cisco AS5800
show spe modem low standard {summary | shelf/slot | shelf/slot/spe}
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Examples
The following example displays standard low speed connections for SPEs in slot 5 on the Cisco AS5400:Router# show spe modem low standard 5<-- MODEM FAX -->SPE/Mod-> B103 V.21 B212 V.22 V.22b V.23 V.32 V.32b V.27t V.29 V.175/00 0 0 0 0 0 0 0 0 0 0 05/01 0 0 0 0 0 0 0 0 0 0 05/02 0 0 0 0 0 0 0 0 0 0 05/03 0 0 0 0 0 0 0 0 0 0 05/04 0 0 0 0 0 0 0 0 0 0 05/05 0 0 0 0 0 0 0 0 0 0 05/06 0 0 0 0 0 0 0 0 0 0 05/07 0 0 0 0 0 0 0 0 0 0 05/08 0 0 0 0 0 0 0 0 0 0 05/09 0 0 0 0 0 0 0 0 0 0 05/10 0 0 0 0 0 0 0 0 0 0 05/11 0 0 0 0 0 0 0 0 0 0 05/12 0 0 0 0 0 0 0 0 0 0 05/13 0 0 0 0 0 0 0 0 0 0 05/14 0 0 0 0 0 0 0 0 0 0 05/15 0 0 0 0 0 0 0 0 0 0 05/16 0 0 0 0 0 0 0 0 0 0 05/17 0 0 0 0 0 0 0 0 0 0 0TOTAL 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000
Table 10 show spe modem low standard Field Descriptions
SPE/Mod for slot.
Standard is displayed for each slot.
The following example displays standard low speed connections for SPEs in slot 8 on the Cisco AS5800:
Router# show spe modem low standard 1/8<-- MODEM FAX -->SPE/Mod-> B103 V.21 B212 V.22 V.22b V.23 V.32 V.32b V.27t V.29 V.171/08/00 0 0 0 0 0 0 0 0 0 0 01/08/01 0 0 0 0 0 0 0 0 0 0 01/08/02 0 0 0 0 0 0 0 0 0 0 01/08/03 0 0 0 0 0 0 0 0 0 0 01/08/04 0 0 0 0 0 0 0 0 0 0 01/08/05 0 0 0 0 0 0 0 0 0 0 01/08/06 0 0 0 0 0 0 0 0 0 0 01/08/07 0 0 0 0 0 0 0 0 0 0 01/08/08 0 0 0 0 0 0 0 0 0 0 01/08/09 0 0 0 0 0 0 0 0 0 0 01/08/10 0 0 0 0 0 0 0 0 0 0 01/08/11 0 0 0 0 0 0 0 0 0 0 01/08/12 0 0 0 0 0 0 0 0 0 0 01/08/13 0 0 0 0 0 0 0 0 0 0 01/08/14 0 0 0 0 0 0 0 0 0 0 01/08/15 0 0 0 0 0 0 0 0 0 0 01/08/16 0 0 0 0 0 0 0 0 0 0 01/08/17 0 0 0 0 0 0 0 0 0 0 01/08/18 0 0 0 0 0 0 0 0 0 0 01/08/19 0 0 0 0 0 0 0 0 0 0 01/08/20 0 0 0 0 0 0 0 0 0 0 0<-- MODEM FAX -->SPE/Mod-> B103 V.21 B212 V.22 V.22b V.23 V.32 V.32b V.27t V.29 V.171/08/21 0 0 0 0 0 0 0 0 0 0 01/08/22 0 0 0 0 0 0 0 0 0 0 01/08/23 0 0 0 0 0 0 0 0 0 0 01/08/24 0 0 0 0 0 0 0 0 0 0 01/08/25 0 0 0 0 0 0 0 0 0 0 01/08/26 0 0 0 0 0 0 0 0 0 0 01/08/27 0 0 0 0 0 0 0 0 0 0 01/08/28 0 0 0 0 0 0 0 0 0 0 01/08/29 0 0 0 0 0 0 0 0 0 0 01/08/30 0 0 0 0 0 0 0 0 0 0 01/08/31 0 0 0 0 0 0 0 0 0 0 01/08/32 0 0 0 0 0 0 0 0 0 0 01/08/33 0 0 0 0 0 0 0 0 0 0 01/08/34 0 0 0 0 0 0 0 0 0 0 01/08/35 0 0 0 0 0 0 0 0 0 0 01/08/36 0 0 0 0 0 0 0 0 0 0 01/08/37 0 0 0 0 0 0 0 0 0 0 01/08/38 0 0 0 0 0 0 0 0 0 0 01/08/39 0 0 0 0 0 0 0 0 0 0 01/08/40 0 0 0 0 0 0 0 0 0 0 01/08/41 0 0 0 0 0 0 0 0 0 0 01/08/42 0 0 0 0 0 0 0 0 0 0 0<-- MODEM FAX -->SPE/Mod-> B103 V.21 B212 V.22 V.22b V.23 V.32 V.32b V.27t V.29 V.171/08/43 0 0 0 0 0 0 0 0 0 0 01/08/44 0 0 0 0 0 0 0 0 0 0 01/08/45 0 0 0 0 0 0 0 0 0 0 01/08/46 0 0 0 0 0 0 0 0 0 0 01/08/47 0 0 0 0 0 0 0 0 0 0 01/08/48 0 0 0 0 0 0 0 0 0 0 01/08/49 0 0 0 0 0 0 0 0 0 0 01/08/50 0 0 0 0 0 0 0 0 0 0 01/08/51 0 0 0 0 0 0 0 0 0 0 01/08/52 0 0 0 0 0 0 0 0 0 0 01/08/53 0 0 0 0 0 0 0 0 0 0 0TOTAL 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000 00000Related Commands
show spe modem high standard
Displays the total number of connections within each high modulation or codec for a specific range of SPE.
show spe modem summary
To display summary of modem service history statistics for the specified service processing element (SPE) or range of SPEs, use the show spe modem summary EXEC command.
Cisco AS5400 and Cisco AS5850
show spe modem summary [slot | slot/spe]
Cisco AS5800
show spe modem summary [shelf/slot | shelf/slot/spe]
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Examples
The following example displays the show spe modem summary command on the Cisco AS5400:
Router# show spe modem summaryAsync1/00 - 5/107, TTY216 - 755786 incoming completes 4 incoming failures0 outgoing completes 0 outgoing failures0 failed dial attempts 0 ring no answers 0 autotests0 no carriers 0 dial timeouts 0 autotest fails0 no dial tones 0 link failures 0 fail count0 watchdog timeouts 0 protocol errors 0 recoversTransmit Speed Counters :Speed Calls Speed Calls Speed Calls Speed Calls Speed Calls60000 0 48000 0 38400 0 30666 0 12000 058000 0 46666 0 38000 0 29333 0 9600 056000 0 46000 0 37333 0 28800 10 7200 054666 0 45333 0 36000 0 28000 0 4800 054000 0 44000 0 34666 0 26400 0 2400 053333 0 42666 0 34000 0 24000 0 1200 052000 0 42000 0 33600 631 21600 0 300 050666 0 41333 0 33333 0 19200 050000 0 40000 0 32000 0 16800 049333 0 38666 0 31200 145 14400 0Receive Speed Counters :Speed Calls Speed Calls Speed Calls Speed Calls Speed Calls38400 0 26400 0 16800 0 7200 0 300 033600 786 24000 0 14400 0 4800 031200 0 21600 0 12000 0 2400 028800 0 19200 0 9600 0 1200 0The following example displays the show spe modem summary command on the Cisco AS5800:
Router# show spe modem summaryAsync1/2/00 - 1/3/323, TTY972 - 16194827 incoming completes 284 incoming failures0 outgoing completes 0 outgoing failures0 failed dial attempts 0 ring no answers 0 autotests0 no carriers 11 dial timeouts 0 autotest fails0 no dial tones 0 link failures 0 fail count0 watchdog timeouts 2787 protocol errors 0 recoversTransmit Speed CountersSpeed Calls Speed Calls Speed Calls Speed Calls Speed Calls60000 0 48000 432 38400 0 30666 0 12000 14358000 0 46666 0 38000 4 29333 0 9600 556000 15 46000 56 37333 111 28800 700 7200 1154666 0 45333 299 36000 84 28000 5 4800 254000 0 44000 227 34666 0 26400 267 2400 053333 123 42666 0 34000 39 24000 46 1200 352000 563 42000 68 33600 323 21600 27 300 050666 0 41333 38 33333 9 19200 3850000 59 40000 65 32000 20 16800 1249333 371 38666 0 31200 654 14400 5Receive Speed CountersSpeed Calls Speed Calls Speed Calls Speed Calls Speed Calls38400 0 26400 2286 16800 11 7200 1 300 233600 113 24000 267 14400 139 4800 131200 216 21600 56 12000 4 2400 328800 1665 19200 47 9600 16 1200 0Related Commands
show spe recovery
To display SPE recovery statistics, use the show spe recovery EXEC command.
Cisco AS5400 and Cisco AS5850
show spe recovery [slot | slot/spe]
Cisco AS5800
show spe recovery [shelf/slot | shelf/slot/spe]
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Usage Guidelines
Use this command to see a list of recovered SPEs.
Examples
The following example displays the show spe recovery command on the Cisco AS5400:
Router# show spe recoverySPE# Session Abort Session NAK Call Failure1/00 0 0 01/01 0 0 01/02 0 0 01/03 0 0 01/04 0 0 01/05 0 0 01/06 0 0 01/07 0 0 01/08 0 0 01/09 0 0 01/10 0 0 01/11 0 0 01/12 0 0 01/13 0 0 01/14 0 0 01/15 0 0 01/16 0 0 01/17 0 0 0The following example displays the show spe recovery command on the Cisco AS5800:
Router# show spe recovery 1/8SPE# Session Abort Session NAK Call Failure1/08/00 0 0 01/08/01 0 0 01/08/02 0 0 01/08/03 0 0 01/08/04 0 0 01/08/05 0 0 01/08/06 0 0 01/08/07 0 0 01/08/08 0 0 01/08/09 0 0 01/08/10 0 0 01/08/11 0 0 01/08/12 0 0 01/08/13 0 0 01/08/14 0 0 01/08/15 0 0 01/08/16 0 0 01/08/17 0 0 01/08/18 0 0 01/08/19 0 0 01/08/20 0 0 01/08/21 0 0 01/08/22 0 0 01/08/23 0 0 01/08/24 0 0 01/08/25 0 0 01/08/26 0 0 01/08/27 0 0 01/08/28 0 0 01/08/29 0 0 01/08/30 0 0 01/08/31 0 0 01/08/32 0 0 01/08/33 0 0 01/08/34 0 0 01/08/35 0 0 01/08/36 0 0 01/08/37 0 0 01/08/38 0 0 01/08/39 0 0 01/08/40 0 0 01/08/41 0 0 01/08/42 0 0 01/08/43 0 0 01/08/44 0 0 01/08/45 0 0 01/08/46 0 0 01/08/47 0 0 01/08/48 0 0 01/08/49 0 0 01/08/50 0 0 01/08/51 0 0 01/08/52 0 0 01/08/53 0 0 0Related Commands
show spe version
To display all MICA and NextPort firmware versions stored in Flash and the firmware assigned to each service processing element (SPE), use the show spe version EXEC command. Also, this command displays the version to firmware file mappings.
Cisco AS5400 and Cisco AS5850
show spe version [slot | slot/spe]
Cisco AS5800
show spe version [shelf/slot | shelf/slot/spe]
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
Usage Guidelines
Use the show spe version command to display the firmware version running on a specific SPE. If shelf/slot/spe is specified, the firmware version for the identified SPE or range of SPEs is displayed. If slot is specified, the firmware version for the identified SPEs in this slot or range of slots is displayed. If no argument is specified, all SPE versions are displayed.
Note
Examples
The following example displays the output of show spe version on a Cisco AS5400:
Router# show spe versionIOS-Bundled Default Firmware-Filename Version Firmware-Type===================================== ======= =============system:/ucode/np_spe_firmware1 0.6.5.5 SPE firmwareOn-Flash Firmware-Filename Version Firmware-Type========================== ======= =============flash:np.spe 0.6.4.5 SPE firmwareSPE-# SPE-Type SPE-Port-Range Version UPG Firmware-Filename4/00 CSMV6 0000-0005 0.6.4.5 N/A np.spe4/01 CSMV6 0006-0011 0.6.5.5 N/A ios-bundled default4/02 CSMV6 0012-0017 0.6.5.5 N/A ios-bundled default4/03 CSMV6 0018-0023 0.6.5.5 N/A ios-bundled default4/04 CSMV6 0024-0029 0.6.5.5 N/A ios-bundled default4/05 CSMV6 0030-0035 0.6.5.5 N/A ios-bundled default4/06 CSMV6 0036-0041 0.6.5.5 N/A ios-bundled default4/07 CSMV6 0042-0047 0.6.5.5 N/A ios-bundled default4/08 CSMV6 0048-0053 0.6.5.5 N/A ios-bundled default4/09 CSMV6 0054-0059 0.6.5.5 N/A ios-bundled default4/10 CSMV6 0060-0065 0.6.5.5 N/A ios-bundled default4/11 CSMV6 0066-0071 0.6.5.5 N/A ios-bundled default4/12 CSMV6 0072-0077 0.6.5.5 N/A ios-bundled default4/13 CSMV6 0078-0083 0.6.5.5 N/A ios-bundled default4/14 CSMV6 0084-0089 0.6.5.5 N/A ios-bundled default4/15 CSMV6 0090-0095 0.6.5.5 N/A ios-bundled default4/16 CSMV6 0096-0101 0.6.5.5 N/A ios-bundled default4/17 CSMV6 0102-0107 0.6.5.5 N/A ios-bundled default
The following example displays the output of show spe version on a Cisco AS5800:
Router# show spe version 1/8IOS-Bundled Default Firmware-Filename Version Firmware-Type===================================== ======= =============system:/ucode/np_spe_firmware1 0.0.6.81 SPE firmwaresystem:/ucode/mica_board_firmware 2.7.2.0 Mica PortwareOn-Flash Firmware-Filename Version Firmware-Type========================== ======= =============slot0:np_6_81.spe 0.0.6.81 SPE firmwareslot0:np_6_80.spe 0.0.6.80 SPE firmwareslot0:mica-modem-pw.2.7.1.1.bin 2.7.1.0 Mica Portwareslot0:mica-modem-pw.2.7.2.0.bin 2.7.2.0 Mica PortwareSPE-# SPE-Type SPE-Port-Range Version UPG Firmware-Filename1/08/00 CSMV6 0000-0005 0.0.6.81 N/A ios-bundled default1/08/01 CSMV6 0006-0011 0.0.6.81 N/A ios-bundled default1/08/02 CSMV6 0012-0017 0.0.6.81 N/A ios-bundled default1/08/03 CSMV6 0018-0023 0.0.6.81 N/A ios-bundled default1/08/04 CSMV6 0024-0029 0.0.6.81 N/A ios-bundled default1/08/05 CSMV6 0030-0035 0.0.6.81 N/A ios-bundled default1/08/06 CSMV6 0036-0041 0.0.6.81 N/A ios-bundled default1/08/07 CSMV6 0042-0047 0.0.6.81 N/A ios-bundled default1/08/08 CSMV6 0048-0053 0.0.6.81 N/A ios-bundled default1/08/09 CSMV6 0054-0059 0.0.6.81 N/A ios-bundled default1/08/10 CSMV6 0060-0065 0.0.6.81 N/A ios-bundled default1/08/11 CSMV6 0066-0071 0.0.6.81 N/A ios-bundled default1/08/12 CSMV6 0072-0077 0.0.6.81 N/A ios-bundled default1/08/13 CSMV6 0078-0083 0.0.6.81 N/A ios-bundled default1/08/14 CSMV6 0084-0089 0.0.6.81 N/A ios-bundled default1/08/15 CSMV6 0090-0095 0.0.6.81 N/A ios-bundled default1/08/16 CSMV6 0096-0101 0.0.6.81 N/A ios-bundled default1/08/17 CSMV6 0102-0107 0.0.6.81 N/A ios-bundled default1/08/18 CSMV6 0108-0113 0.0.6.81 N/A ios-bundled default1/08/19 CSMV6 0114-0119 0.0.6.81 N/A ios-bundled default1/08/20 CSMV6 0120-0125 0.0.6.81 N/A ios-bundled default1/08/21 CSMV6 0126-0131 0.0.6.81 N/A ios-bundled default1/08/22 CSMV6 0132-0137 0.0.6.81 N/A ios-bundled default1/08/23 CSMV6 0138-0143 0.0.6.81 N/A ios-bundled default1/08/24 CSMV6 0144-0149 0.0.6.81 N/A ios-bundled default1/08/25 CSMV6 0150-0155 0.0.6.81 N/A ios-bundled default1/08/26 CSMV6 0156-0161 0.0.6.81 N/A ios-bundled default1/08/27 CSMV6 0162-0167 0.0.6.81 N/A ios-bundled default1/08/28 CSMV6 0168-0173 0.0.6.81 N/A ios-bundled default1/08/29 CSMV6 0174-0179 0.0.6.81 N/A ios-bundled default1/08/30 CSMV6 0180-0185 0.0.6.81 N/A ios-bundled default1/08/31 CSMV6 0186-0191 0.0.6.81 N/A ios-bundled default1/08/32 CSMV6 0192-0197 0.0.6.81 N/A ios-bundled default1/08/33 CSMV6 0198-0203 0.0.6.81 N/A ios-bundled default1/08/34 CSMV6 0204-0209 0.0.6.81 N/A ios-bundled default1/08/35 CSMV6 0210-0215 0.0.6.81 N/A ios-bundled default1/08/36 CSMV6 0216-0221 0.0.6.81 N/A ios-bundled default1/08/37 CSMV6 0222-0227 0.0.6.81 N/A ios-bundled default1/08/38 CSMV6 0228-0233 0.0.6.81 N/A ios-bundled default1/08/39 CSMV6 0234-0239 0.0.6.81 N/A ios-bundled default1/08/40 CSMV6 0240-0245 0.0.6.81 N/A ios-bundled default1/08/41 CSMV6 0246-0251 0.0.6.81 N/A ios-bundled default1/08/42 CSMV6 0252-0257 0.0.6.81 N/A ios-bundled default1/08/43 CSMV6 0258-0263 0.0.6.81 N/A ios-bundled default1/08/44 CSMV6 0264-0269 0.0.6.81 N/A ios-bundled default1/08/45 CSMV6 0270-0275 0.0.6.81 N/A ios-bundled default1/08/46 CSMV6 0276-0281 0.0.6.81 N/A ios-bundled default1/08/47 CSMV6 0282-0287 0.0.6.81 N/A ios-bundled default1/08/48 CSMV6 0288-0293 0.0.6.81 N/A ios-bundled default1/08/49 CSMV6 0294-0299 0.0.6.81 N/A ios-bundled default1/08/50 CSMV6 0300-0305 0.0.6.81 N/A ios-bundled default1/08/51 CSMV6 0306-0311 0.0.6.81 N/A ios-bundled default1/08/52 CSMV6 0312-0317 0.0.6.81 N/A ios-bundled default1/08/53 CSMV6 0318-0323 0.0.6.81 N/A ios-bundled defaultRelated Commands
shutdown (port)
To disable a port, use the shutdown port configuration command. To change the administrative state of a port from out-of-service to in service, use the no form of this command.
shutdown
no shutdown
Syntax Description
This command has no arguments or keywords.
Defaults
Port is enabled.
Command Modes
Port configuration
Command History
Usage Guidelines
The shutdown command disables a port.
Note
Examples
The following example first resets ports 1 to 18 before running the shutdown command:
Router(config)# port 1/18Router(config-port)# shutdownRouter(config-port)# no shutdownRouter(config-port)# exitRelated Commands
:100 cause recovery, Bit 
:1000 cause recovery, Bit 
:10000 cause recovery, Bit 
:100000 cause recovery, or Bit 
:1000000 cause recovery. Default is 1:1000.
1/8 Hx steps.
1/8 Hz steps.
1/8 Hz steps.