Table Of Contents
Dial-Peer Hunting Termination on the Cisco MC3810
Supported Standards, MIBs, and RFCs
Disabling Dial-Peer Hunting on a Dial Peer
Reenabling Dial-Peer Hunting on a Dial Peer
Dial-Peer Hunting Termination on the Cisco MC3810
Feature Overview
When using dial-peer hunt groups and a call fails, the system continues the dial-peer hunting process indefinitely. By using the new huntstop dial-peer command, you can disable dial-peer hunting on a specific dial peer.
Benefits
The new huntstop command provides more control over your dial-peer hunt groups, enabling you to disable the dial-peer hunting if the call fails.
Restrictions
None.
Related Documents
For information about Voice over Frame Relay configuration using FRF.11 and FRF.12, see the online feature module Voice over Frame Relay Using FRF.11 and FRF.12 for Cisco IOS Release 12.0(4)T.
For information about Voice over ATM configuration on the Cisco MC3810, see 12.0 IOS Voice, Video and Home Applications Software Configuration Guide.
Supported Platforms
Cisco MC3810 series multiservice access concentrators
Supported Standards, MIBs, and RFCs
None.
Prerequisites
This feature requires that your Voice over Frame Relay or Voice over ATM dial peers are configured, and that you have configured hunt groups.
Configuration Tasks
You can disable dial-peer hunting for hunt groups, and reenable dial-peer hunting as needed. In this release, this feature applies only to Voice over Frame Relay and Voice over ATM on the Cisco MC3810.
Disabling Dial-Peer Hunting on a Dial Peer
To disable dial-peer hunting on a dial peer, enter the following commands beginning in global configuration mode:
Reenabling Dial-Peer Hunting on a Dial Peer
To reenable dial-peer hunting on a dial peer, enter the following commands beginning in global configuration mode:
Command Reference
This section documents new or modified commands. All other commands used with this feature are documented in the Cisco IOS Release 12.0 command reference publications. This section includes information on the following modified command:
In Cisco IOS Release 12.0(1)T or later releases, you can search and filter the output for show and more commands. This functionality is useful when you need to sort through large amounts of output, or if you want to exclude output that you do not need to see.
To use this functionality, enter a show or more command followed by the "pipe" character (|), one of the keywords begin, include, or exclude, and an expression that you want to search or filter on:
command | {begin | include | exclude} regular-expression
See the following example of the show atm vc command where you want the command output to begin with the first line where the expression "PeakRate" appears:
show atm vc | begin PeakRate
For more information on the search and filter functionality, refer to the Cisco IOS Release 12.0(1)T feature module titled CLI String Search.
huntstop
To disable all further dial-peer hunting if a call fails when using hunt groups, enter the huntstop dial-peer configuration command. To reenable dial peer call hunting, enter the no form of this command.
huntstop
no huntstopSyntax Description
This command has no arguments or keywords.
Defaults
Disabled
Command Modes
Dial-peer configuration
Command History
Usage Guidelines
Once you enter this command, no further hunting is allowed if a call fails on the specified dial peer.
This command can be used with all types of dial peers.
Examples
The following example shows how to disable dial-peer hunting on a specific dial peer:
router(config)# dial peer voice 100 vofrrouter(config-dialpeer)# huntstopThe following example shows how to reenable dial-peer hunting on a specific dial peer:
router(config)# dial peer voice 100 vofrrouter(config-dialpeer)# no huntstopRelated Commands
dial-peer voice
Enters dial-peer configuration mode and specifies the method of voice-related encapsulation.
Guest
