-
Cisco IOS Release 12.0S System Message Guide
-
System Messages Overview
-
AAAA through AUDIT messages
-
AUTORP through C10KSDCC messages
-
C10K_TOASTER through CBUS messages
-
CE3 through CPUIF messages
-
CRYPTO through ECC messages
-
EDGE through EE192 messages
-
EELC through ENV_MON messages
-
ESMP through FM messages
-
FR through GLCSPA messages
-
GRP through GRPSPA messages
-
GRP_CHOCX through GT96K_FE messages
-
HA through I82543 messages
-
ICC through IPV6FIB messages
-
IP_VRF through LC_CHOCX messages
-
LCCOREDUMP through LCINFO messages
-
LCLOG through MBUSFLASH messages
-
MCC192 through MPLS_TE_LM messages
-
MPLS_TE_PCALC through PM3386 messages
-
PM622 through PRP2 messages
-
PS through RSP messages
-
RSVP through SW_MGR messages
-
SYS through TCAM_MGR messages
-
TCATM through XCPA messages
-
Glossary of Acronyms
-
Table Of Contents
CAMR_ETHERCHANNEL_GENERAL Messages
CAMR_QUEUE_CFG_GENERAL Messages
C10K_TOASTER Messages
The following are Constellation 10K Toaster messages.
Error Message%C10K_TOASTER-1-DOWNLOAD : [chars]: Toaster microcode image [chars]: could not be downloaded.
Explanation The Toaster microcode could not be downloaded. This condition could be due to an already corrupted image or to a software or hardware problem.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-2-DUMP : C10K Toaster has crashed, attempting to write core file(s)....
Explanation The C10K Toaster has crashed because of an exception. Depending on the current configuration, one or more core files will be generated.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-3-ERROR : [chars]
Explanation This message provides general error information.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-0-FP_ERROR : FP Init error: [chars]
Explanation The FP board is not working properly or it is not compatible with the Cisco IOS software image that is running on the system.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-0-FP_REV : FP rev [dec].[dec] is [chars], require at least [dec].[dec]
Explanation The Cisco IOS software image that is running on the system is incompatible with the hardware revision of the FP board; or the FP board is supported, but with software workarounds for certain hardware problems. If a software and hardware incompatibility is indicated, the Cisco IOS software did not complete the boot process. If software workarounds are indicated, the Cisco IOS software will run, but may exhibit unexpected behavior.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-0-FP_TYPE : FP type [dec] is [chars]
Explanation This Cisco IOS software image is incompatible with the FP board hardware type.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-1-HDRCORRUPT : Toaster microcode header of image [chars] has been corrupted, expected [hex], got [hex].
Explanation The Toaster microcode appears to be corrupted. This condition could be due to an already corrupted image or, less likely, a software problem.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-1-IMAGE : Toaster microcode image [chars]: could not be read.
Explanation The Toaster microcode could not be read. This condition could be due to an already corrupted image or, less likely, a software problem.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-1-INCOMPAT : This microcode image is incompatible with this Cisco IOS image.
Explanation The signature in the microcode image does not match the signature in the Cisco IOS software image.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-1-METADATA : Toaster microcode meta-data [chars]: [chars], in file: [chars].
Explanation The Toaster microcode appears to be corrupted. This condition could be due to an already corrupted image or, less likely, a software problem.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-1-OPER : Toasters not operational: [chars]
Explanation The Toaster clients could not be made operational. This condition could be due to a software or hardware problem.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-1-ROW : Toaster microcode header of image [chars] doesn't match block [chars], row [dec] not row [dec].
Explanation The Toaster microcode appears to be corrupted. This could be due to an already corrupted image or, less likely, a software problem.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-2-STALL : Toaster Stall detected
Explanation The C10K Toaster driver detected a toaster stall condition.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-1-START : Toasters not started: memory state: [dec], expected [dec].
Explanation The Toaster clients could not be started. This condition could be due to a software or hardware problem.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-6-STARTLOAD : Downloading Microcode: file=[chars], version=[chars], description=[chars]\n
Explanation Microcode is being downloaded to the Toaster.
Recommended Action This is an informational message only. No action is required.
Error Message%C10K_TOASTER-6-STARTPXF : \n!!pxf clients started, forwarding code operational!!
Explanation The PXF clients have been started.
Recommended Action No action is required.
Error Message%C10K_TOASTER-1-TDB : Could not find control block for Toaster image [chars].
Explanation A software error occurred that prevented locating the control block representing the Toaster specified in the error message.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-1-UNUSABLE : No usable Toaster microcode
Explanation No usable Toaster could be loaded. This condition could be due to an already-corrupted image, or to a software or hardware problem.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C10K_TOASTER-1-WRONGIMAGE : The image downloaded to the Router is a mismatch
Explanation The image downloaded to the router is not supported by the hardware.
Recommended Action Load a Cisco IOS software image that supports the router hardware.
C10K_WRED Messages
The following are C10K PXF WRED Configuration messages.
Error Message%C10K_WRED-2-EREVENT : Error @ [chars]:[dec]
Explanation This message provides information regarding a general error to be used for sanity tests.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
C7200 Messages
The following are Cisco 7200 platform messages.
Error Message%C7200-3-IONOTSUPPORTED : I/O Controller ([chars]) is not supported on this [chars]
Explanation This I/O controller is not supported on this chassis or with this CPU card.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%C7200-3-IONOTSUPPORTEDBYLOADER : I/O Controller (type [dec]) is not supported by this boot loader. The I/O Controller network interfaces will be unavailable.
Explanation The I/O controller specified is not supported by this boot loader; therefore, the network interfaces cannot be used during the boot.
Recommended Action If the specified I/O Controller support is needed in the boot loader, you may need an enhanced boot image (-kboot-) or need to configure your router to use a full image as the boot loader.
Error Message%C7200-4-NOPXFSUPPORT : PXF switching not supported
Explanation This current Cisco IOS software release does not support the PXF processor.
Recommended Action Replace the Cisco IOS software release with a release that supports PXF.
Error Message%C7200-3-PACONFIG : Exceeds [dec] [chars]
Explanation The total bandwidth of fast- and medium-bandwidth port adapters has exceeded the rated capacity of this system.
Recommended Action Refer to the configuration guidelines for the maximum allowed high- and medium-bandwidth port adapters for the system.
Error Message%C7200-4-RECALLED_NPE : Old version NPE-175/225 with Rev = [hex] system controller. Contact upgrades-info@cisco.com for replacement
Explanation The NPE board has been recalled due to an errata in the system controller chip.
Recommended Action Replace the NPE-175/225 board.
Error Message%C7200-2-UNDEFIO : Unsupported I/O Controller (type [dec]) in I/O Bay. The I/O Controller network interfaces will be unavailable.
Explanation The software does not have a driver for this I/O controller type and thus cannot install the network interfaces.
Recommended Action Verify that the image you are running supports this controller. Newer I/O controllers require a -kboot- image. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
C7200_TDM Messages
The following are Cisco 7200 Midplane TDM Bus messages.
Error Message%C7200_TDM-4-IOMEM_LOCATION_MISMATCH : I/O memory location mismatch. Configured location is [dec], current location is [dec]
Explanation The current I/O memory location does not agree with the configured location.
Recommended Action Reboot the router to relocate the I/O memory.
Error Message%C7200_TDM-3-TDM_CLOSE : MT90820 Midplane Close connection failed - STo[dec], CHo[dec]
Explanation An attempt to disable the midplane TDM connection has failed.
Recommended Action No action is required.
Error Message%C7200_TDM-3-TDM_INV_CONN_REQ : Upper Layer made invalid TDM request - STo[dec], CHo[dec]
Explanation An invalid request was made to use the TDM midplane.
Recommended Action No action is required.
Error Message%C7200_TDM-3-TDM_INV_DISC_REQ : Upper Layer made invalid TDM request - STo[dec], CHo[dec]
Explanation An invalid request was made to use the TDM midplane.
Recommended Action No action is required.
Error Message%C7200_TDM-4-TDM_MONITOR : TDM Monitor running, counter = [dec], failed = [dec]
Explanation The status of the TDM monitor is displayed.
Recommended Action No action is required.
Error Message%C7200_TDM-4-TDM_MONITOR_DONE : TDM Monitor stopped, counter = [dec], failed = [dec]
Explanation The status of the TDM monitor is displayed.
Recommended Action No action is required.
Error Message%C7200_TDM-3-TDM_OPEN : MT90820 Midplane Open connection failed - STi[dec], CHi[dec], STo[dec], CHo[dec]
Explanation An attempt to open a midplane TDM connection has failed.
Recommended Action No action is required.
Camr Messages
The following are CAMR messages.
Error Message%Camr-3-BADCARDTYPE : Card type [dec] is invalid for slot [dec]
Explanation The card type derived from the card IDPROM is not supported. This message could indicate that the card type is new, and the Cisco IOS software release that is running on the router does not support it.
Recommended Action Upgrade the Cisco IOS software image to a release that supports this card type.
Error Message%Camr-3-BADIDB : An IDB contains invalid data in function [chars]
Explanation An internal software error has occurred.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-BADNV : Detected invalid NVRAM size: [dec] bytes
Explanation The detected size of NVRAM is not one of the supported sizes. The NVRAM may have failed.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-BADPA : Invalid Port Adaptor type ([dec]) reported for mainboard
Explanation The virtual port adapter type derived from the mainboard type is not one of the supported types. It may be that this mainboard is a new mainboard type, and the Cisco IOS software release that is running on the system does not support the new mainboard type.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-BRIDGING : Software error in bridging: [chars]
Explanation An internal software error that is related to bridging functionality has occurred.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-4-COOKIE : Corrupt or missing MAC address cookie, using random base [enet]
Explanation The ID programmable memory on the main board is not programmed correctly or is corrupted.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-INTPROC : [chars] [chars]
Explanation This message displays the interrupt and process stack after an error interrupt has occurred. This is added information for an error that has just occurred.
Recommended Action No action is required.
Error Message%Camr-3-MISTRAL_ERROR : [chars]
Explanation A Mistral ASIC error interrupt has occurred.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-MISTRAL_IO_ERROR : MISTRAL_IO_BUS_INT_MASK_LO: 28, Error Address = [hex], IO status = [hex]
Explanation A Mistral ASIC error interrupt has occurred because an access to the I/O bus timed out. The address printed should point to the device in error, or the process traceback which follows this message should point to the invalid code which accessed an incorrect address.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-MISTRAL_OVFL : MISTRAL_LBIC_PKTBUF_OVFL_INT: 44 [hex]
Explanation A packet over 15872 bytes (62 pages) has been received. This message also can indicate a system under a very heavy load.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-MISTRAL_TIMEOUT_ERROR : MISTRAL_SYSAD_TIMEOUT_DPATH_INT_MASK_HI: 39, sysad_dpath_cmd_log = [hex],sysad_dpath_addr_log = [hex],sysad_dpath_parity_log = [hex],sysad_dpath_data_log = [hex]
Explanation A Mistral ASIC Error Interrupt occurred because of a processor system bus (SySAD) timeout.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-NOBUFS : No buffers available for [chars]
Explanation A software error has occurred. A probable cause for this error is a memory leak.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Enter the show tech-support command to gather data that may help identify the nature of the error. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-NO_GIG_SYNC : Inband Gig interface not synchronized, status [hex]
Explanation The hardware for transmitting and receiving packets to and from the router is not functioning properly.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-NOMAC : Can't allocate MAC address for interface [int]/[int]
Explanation All the available MAC addresses for the system have been allocated.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-NOMEM : OUT of Memory: [chars]
Explanation There is not enough system memory to allocate the data.
Recommended Action If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-NO_MISTRAL_INIT_STATUS : Mistral init status of 0xf not obtained, status [hex]
Explanation The Mistral ASIC initialization status could not be properly obtained.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-NO_OBL_TO_INBAND : Mistral OBL to INBAND semaphore not obtained
Explanation The Mistral ASIC OBL to Inband semaphore could not be properly obtained.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-NOT_IDLE : Receive path not idle after reset
Explanation The receive hardware is not idle after it has been reset.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-NVERASEFAIL : Failed to erase config due to internal error
Explanation The password protection feature failed to erase the configuration due to an internal error.
Recommended Action If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-1-OVERTEMP : System detected OVERTEMPERATURE condition.
Putting the system in Power save mode and going to rommon.
Please resolve cooling problem and restart system!\nExplanation The environmental monitor has detected a high temperature condition.
Recommended Action Ensure that the room temperature is not too high and that air flow to the card is not blocked. If this condition persists, the environmental monitor might shut down the system. If this message recurs, copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%Camr-3-POWERFAIL : Power failure on slot [int]
Explanation The power did not reach its required level on the specified slot.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Camr_Access Messages
The following are Cisco C10720 24FE access card messages.
Error Message%Camr_Access24FE-3-FPGA_UPLOAD_FAILED : Access FPGA upload failed. Sanity register is [hex].
Explanation Unavailable.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Camr_COIL Messages
The following are CAMR coil global status messages.
Error Message%Camr_COIL-3-DUPLEXMISMATCH : Port [dec] - Late collision detected. Possible Duplex Mismatch.
Explanation The port duplex does not duplex type of the other end.
Recommended Action Properly configure the duplex value of this port. Some devices do not support auto-negotiation so an explicit duplex value (either half or full) might have to be specified.
Error Message%Camr_COIL-3-GLOBALCOILSTATUS : Coil [dec] - Global coil status error detected: [chars](code [hex])
Explanation Unavailable.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
CAMR_DOT17_OC48 Messages
The following are Cisco CAMR DOT17 OC48 messages.
Error Message%CAMR_DOT17_OC48-3-FPGA_UPLOAD_FAILED : Uplink FPGAs upload failed. TX FPGA failures: [dec] RX FPGA failures: [dec]
Explanation An upload operation for the FPGAs has failed.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_DOT17_OC48-3-INTERR : DOT17 uplink internal error [chars](code [hex])
Explanation The DOT17 uplink hardware has reported an internal error.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_DOT17_OC48-3-KARMACAM : C10720, KARMACAM overflowed with addresses
Explanation An error involving the KARMACAM has occurred.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_DOT17_OC48-3-KARMAHITB : C10720([dec]/[dec]), KARMA Transit Buffer overflowed
Explanation Hardware errors involving the KARMA have occurred.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_DOT17_OC48-3-KARMALOTB : C10720([dec]/[dec]), KARMA Transit Buffer overflowed
Explanation KARMA hardware errors have occurred.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_DOT17_OC48-3-KARMARXERR : DOT17 uplink KARMA receive error [chars](code [hex]) on span [chars]
Explanation The DOT17 uplink hardware has reported that KARMA is experiencing errors while it is receiving information.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_DOT17_OC48-3-KARMAWATCHDOG : C10720([dec]/[dec]): Span [chars] KARMA watchdog expired. This node is now in passthrough.
Explanation The KARMA watchdog timer has expired.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
CAMR_ETHERCHANNEL_GENERAL Messages
The following are CAMR EtherChannel messages.
Error Message%CAMR_ETHERCHANNEL_GENERAL-3-EREVENT : [chars]
Explanation This message provides information regarding a general error to be used for sanity tests.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_ETHERCHANNEL_GENERAL-3-FEATURE_FAIL : EtherChannel: [chars] feature failed
Explanation An exception case has been encountered with the EtherChannel. The operation for the feature specified in the error message has failed.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
CAMR_POS_OC48 Messages
The following are Cisco CAMR PoS RP driver messages.
Error Message%CAMR_POS_OC48-3-APS : [chars]: [chars]
Explanation This message provides information regarding the C10720 PoS interface APS.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_POS_OC48-3-COAPSTHROTTLE : POS interface [dec]/[dec]: [chars]
Explanation An excessive number of COAPS interrupts have been ignored.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_POS_OC48-3-CRC16_NOT_SUPPORT : change to CRC32 on [chars]
Explanation The C10720 does not support CRC16 in the PoS interface.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_POS_OC48-3-ENCAP_NOT_SUPPORT : [chars]: [dec]
Explanation The specified encapsulation type is not supported.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_POS_OC48-3-FPGA_UPLOAD_FAILED : Uplink FPGAs upload failed. TX FPGA failures: [dec] RX FPGA failures: [dec]
Explanation The uploading of the uplink card FPGA has failed.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_POS_OC48-3-INTERR : POS uplink internal error [chars](code [hex])
Explanation The PoS uplink hardware has reported an internal error.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_POS_OC48-4-MSGVERSION : Incompatible message version with slot [dec]
Explanation There is an incompatibility between the message version being sent by the line card and the message version used by the GRP. This condition might occur if the GRP and line card are using different Cisco IOS versions due to a GRP OIR event. PoS statistics will not be reported to the GRP.
Recommended Action Reload the microcode.
Error Message%CAMR_POS_OC48-3-NO_SUBBLOCK : \n[chars]: Subblock not found - configuration not accepted
Explanation The PoS code cannot find the subblock.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at http://www.cisco.com/tac. With some messages, these tools and utilities will supply clarifying information. Search for resolved software issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl. If you still require assistance, open a case with the Technical Assistance Center via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl, or contact your Cisco technical support representative and provide the representative with the information you have gathered. Attach the following information to your case in nonzipped, plain-text (.txt) format: the output of the show logging and show tech-support commands and your pertinent troubleshooting logs.
Error Message%CAMR_POS_OC48-3-OP : Interface ([chars]): [chars] - [dec]
Explanation The POS RP driver has received an unexpected event.
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show gsr and show ipc status commands to gather data that may help identify the nature of the error. If you cannot determine the nature of the error from the error message text or from the show gsr and show ipc status command output, contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message%CAMR_POS_OC48-3-PLATFORM : Slot ([dec]): [chars] - [dec]
Explanation The PoS RP driver has received an unexpected platform type.
Recommended Action Copy the error message exactly as it appears on the console or in the system log. Issue the show gsr command to gather data that may help identify the nature of the error. If you cannot determine the nature of the error from the error message text or from the show gsr command output, contact your Cisco technical support representative and provide the representative with the information you have gathered.
Error Message%CAMR_POS_OC48-3-POS_NOT_SUPPORT : This uplink card doesn't support POS(fabver=[dec])
Explanation The PoS mode does not support the prototype uplink card specified in the error message because the uplink card is obsolete.
Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the issue using the tools and utilities provided at