Downloads |
 Feedback
|
Table Of Contents
Supported Standards, MIBs, and RFCs
show snmp mib notification-log
snmp mib notification-log default
snmp mib notification-log globalageout
snmp mib notification-log globalsize
SNMP Notification Logging
Feature History
This document describes the SNMP Notification Logging feature in Cisco IOS Release 12.0(22)S. It includes the following sections:
Supported Standards, MIBs, and RFCs
Feature Overview
Systems that support Simple Network Management Protocol (SNMP) often need a mechanism for recording notification information as a hedge against lost notifications, whether those are traps or informs that exceed retransmission limits. The Notification Log MIB provides a common infrastructure for other MIBs in the form of a local logging function. The SNMP Notification Logging feature adds Cisco IOS command-line interface (CLI) commands to change the size of the notification log, to set the global ageout value for the log, and to display logging summaries at the command line.
Note
This MIB only supports notification logging on the default log.
Benefits
•
•
Related Documents
•
•
Supported Platforms
•
Determining Platform Support Through Cisco Feature Navigator
Cisco IOS software is packaged in feature sets that are supported on specific platforms. To get updated information regarding platform support for this feature, access Cisco Feature Navigator. Cisco Feature Navigator dynamically updates the list of supported platforms as new platform support is added for the feature.
Cisco Feature Navigator is a web-based tool that enables you to quickly determine which Cisco IOS software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or release. Under the release section, you can compare releases side by side to display both the features unique to each software release and the features in common.
To access Cisco Feature Navigator, you must have an account on Cisco.com. If you have forgotten or lost your account information, send a blank e-mail to cco-locksmith@cisco.com. An automatic check will verify that your e-mail address is registered with Cisco.com. If the check is successful, account details with a new random password will be e-mailed to you. Qualified users can establish an account on Cisco.com by following the directions found at this URL:
Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following URL:
Availability of Cisco IOS Software Images
Platform support for particular Cisco IOS software releases is dependent on the availability of the software images for those platforms. Software images for some platforms may be deferred, delayed, or changed without prior notice. For updated information about platform support and availability of software images for each Cisco IOS software release, refer to the online release notes or, if supported, Cisco Feature Navigator.
Supported Standards, MIBs, and RFCs
Standards
No now or modified standards are supported by this feature.
MIBs
No new or modified MIBs are supported by this feature.
To locate and download MIBs for selected platforms, Cisco IOS releases, and feature sets, use Cisco MIB Locator found at the following URL:
http://tools.cisco.com/ITDIT/MIBS/servlet/index
If Cisco MIB Locator does not support the MIB information that you need, you can also obtain a list of supported MIBs and download MIBs from the Cisco MIBs page at the following URL:
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml
To access Cisco MIB Locator, you must have an account on Cisco.com. If you have forgotten or lost your account information, send a blank e-mail to cco-locksmith@cisco.com. An automatic check will verify that your e-mail address is registered with Cisco.com. If the check is successful, account details with a new random password will be e-mailed to you. Qualified users can establish an account on Cisco.com by following the directions found at this URL:
RFCs
•
Configuration Tasks
None
Configuration Examples
None
Command Reference
This section documents new commands. All other commands used with this feature are documented in the Cisco IOS Release 12.2 command reference publications.
New commands
•
•
•
•
show snmp mib notification-log
To display a log summary, including default and named logs, use the show snmp mib notification-log command in EXEC mode.
show snmp mib notification-log [all | default]
Syntax Description
Defaults
No default behavior or values.
Command Modes
EXEC
Command History
12.0(22)S
This command was introduced.
12.2(13)T
This command was integrated into 12.2(13)T.
12.0(32)S
This command was integrated into 12.0(32)S.
Examples
The following is sample output from the show snmp mib notification-log command:
router# show snmp mib notification-logGlobalAgeout 15, GlobalEntryLimit 500Total Notifications logged in all logs 0Log Name"", Log entry Limit 500, Notifications logged 0Logging status enabledCreated by clisnmp mib notification-log default
To create the default log in the MIB, use the snmp mib notification-log default command in global configuration mode. To delete the log, use the no form of this command.
snmp mib notification-log default [disable] [size number]
no snmp mib notification-log default [disable] [size number]
Syntax Description
disable
(Optional) Log is not allowed to add new notifications to itself.
size
(Optional) Maximum number of notifications a log can contain.
number
Number of notifications.
Defaults
Logging is enabled.
Command Modes
Global configuration
Command History
12.0(22)S
This command was introduced.
12.2(13)T
This command was integrated into 12.2(13)T.
12.0(32)S
This command was integrated into 12.0(32)S.
Usage Guidelines
The no form of this command reverts the size to the default and enables logging, and the log will not be destroyed.
Examples
The following examples shows how to create a default log with a size of 10:
snmp mib notification-log default size 10Related Commands
snmp mib notification-log globalageout
To set the global ageout for logging a notification, use the snmp mib notification-log globalageout command in global configuration mode. To restore the default value, use the no form of this command.
snmp mib notification-log globalageout minutes
no snmp mib notification-log globalageout minutes
Syntax Description
Defaults
15 minutes
Command Modes
Global configuration
Command History
12.0(22)S
This command was introduced.
12.2(13)T
This command was integrated into 12.2(13)T.
12.0(32)S
This command was integrated into 12.0(32)S.
Usage Guidelines
The notification log MIB logs notifications after they have passed through notification filtering. The agent will have determined the destination target and the parameters.
Examples
The following example shows how to set the ageout limit to 5 minutes:
snmp mib notification-log globalageout 5Related Commands
snmp mib notification-log globalsize
To set the maximum number of notifications that can be logged in all logs, use the snmp mib notification-log globalsize command in global configuration mode. To restore the default value, use the no form of this command.
snmp mib notification-log globalsize number
no snmp mib notification-log globalsize number
Syntax Description
Defaults
15000 notifications
Command Modes
Global Configuration
Command History
12.0(22)S
This command was introduced.
12.2(13)T
This command was integrated into 12.2(13)T.
12.0(32)S
This command was integrated into 12.0(32)S.
Examples
The following example shows how to set the maximum number of logs to 20:
snmp mib notification-log globalsize 20Related Commands
Glossary
SNMP—Simple Network Management Protocol. Network management protocol used almost exclusively in TCP/IP networks. SNMP provides a means to monitor and control network devices, and to manage configurations, statistics collection, performance, and security.
VACM— View-based access control mechanism for SNMP. This mechanism is described in RFC2575.
MIB—Management Information Base. The MIBs referred to in this document are MIB modules. These modules contain definitions of management information for use by SNMP network management systems.
Managed system—An SNMP agent.
