Table Of Contents

Token Ring Inter-Switch Link Commands

clear drip counters

encapsulation tr-isl trbrf-vlan

multiring trcrf-vlan

show drip

source-bridge trcrf-vlan

Token Ring Inter-Switch Link Commands

---

Use the commands in this chapter to configure Token Ring Inter-Switch Link (TRISL) on Cisco routers. To locate related commands that are documented in other chapters, use the command reference master index or search online. For TRISL configuration task information and examples, refer to the "Configuring Token Ring Inter-Switch Link" chapter in the Bridging and IBM Networking Configuration Guide.

For hardware technical descriptions and for information about installing the router interfaces, refer to the hardware installation and maintenance publication for your particular product.

clear drip counters

Use the clear drip counters privileged EXEC command to clear DRiP counters.

clear drip counters

Syntax Description

This command has no arguments or keywords.

Command Modes

Privileged EXEC

Command History

Release	Modification
11.3(4)T	This command was introduced.

Usage Guidelines

Use the clear drip counters command if you want to check whether the router is receiving any packets. The counters will start at 0. If the counters are incrementing, DRiP is active on the router.

Examples

The following example clears DRiP counters:

router# clear drip counters

Related Commands

Command	Description
encapsulation tr-isl trbrf-vlan	Enables TRISL, a Cisco protocol for interconnecting multiple routers and switches and maintaining Token Ring VLAN information as traffic goes between switches.
show drip	Displays the status of the DRiP database.

encapsulation tr-isl trbrf-vlan

Use the encapsulation tr-isl trbrf-vlan subinterface configuration command to enable TRISL, a Cisco protocol for interconnecting multiple routers and switches and maintaining Token Ring VLAN information as traffic goes between switches.

encapsulation tr-isl trbrf-vlan vlanid bridge-num bridge-number

no encapsulation tr-isl trbrf-vlan vlanid bridge-num bridge-number

Syntax Description

vlanid	Number identifying the VLAN.
bridge-num bridge-number	Keyword and bridge number assigned to the ISL trunk. Possible values are 01 to 15.

Command Modes

Subinterface configuration

Command History

Release	Modification
11.3(4)T	This command was introduced.

Examples

The following example enables TRISL is on a Fast Ethernet subinterface:

interface FastEthernet4/0.2 
encapsulation tr-isl trbrf-vlan 999 bridge-num 14

Related Commands

Command	Description
clear drip counters	Clears DRiP counters.
clear vlan statistics	Removes virtual LAN statistics from any statically or system configured entries.
multiring	Enables collection and use of RIF information.
multiring trcrf-vlan	Creates a pseudo-ring to terminate the RIF for source-routed traffic and assigns it to a VLAN.
show drip	Displays the status of the DRiP database.
show vlans	Displays virtual LAN subinterfaces.
source-bridge trcrf-vlan	Attaches a TrCRF VLAN to the virtual ring of the router.

multiring trcrf-vlan

Use the multiring trcrf-vlan interface configuration command to create a pseudo-ring to terminate the RIF for source routed traffic and assign it to a VLAN. Use the no form of this command to disable the caching of RIFs on the subinterface.

multiring trcrf-vlan vlanid ring ring-number

no multiring trcrf-vlan vlanid ring ring-number

Syntax Description

vlanid	VLAN ID number.
ring ring-number	Keyword and the logical ring number for Token Ring VLANs. Possible values are 01 to 4095.

Defaults

Disabled

Command Modes

Interface configuration

Command History

Release	Modification
11.3(4)T	This command was introduced.

Usage Guidelines

When you use this command, you must also use the multiring command to enable the collection and caching of RIFs with routed protocols. The multiring trcrf-vlan command must be issued before the multiring command.

Examples

In the following example, the multiring trcrf-vlan command is used to configure a pseudo-ring for the subinterface:

interface FastEthernet4/0.1

 ip address 5.5.5.1 255.255.255.0

 encapsulation tr-isl trbrf-vlan 999 bridge-num 14

 multiring trcrf-vlan 1000 ring 100

  multiring all

Related Commands

Command	Description
clear drip counters	Clears DRiP counters.
multiring	Enables collection and use of RIF information.
show drip	Displays the status of the DRiP database.
show rif	Displays the current contents of the RIF cache.
show vlans	Displays virtual LAN subinterfaces.

show drip

Use the show drip privileged EXEC command to display the status of the DRiP database.

show drip

Syntax Description

This command has no arguments or keywords.

Command Modes

Privileged EXEC

Command History

Release	Modification
11.3(4)T	This command was introduced.

Examples

The following is sample output from the show drip command:

Router# show drip

DRIP Database for Mgmt Domain FastEthernet4/0

--------------------------------------------------

Mac Address 0010-A6AE-B440

Vlan     100    Status    30 : l-active, l-config, 

Mac Address 0010-2F72-C800

Vlan      20    Status    0C : r-active, r-config, 

Vlan    1003    Status    0C : r-active, r-config,

Statistics:

Advertisements received            126

Advertisements processed           1

Advertisements transmitted         131

Last revision transmitted          0x84      

Last changed revision transmitted  0x2 

Related Commands

Command	Description
encapsulation tr-isl trbrf-vlan	Enables TRISL, a Cisco protocol for interconnecting multiple routers and switches and maintaining Token Ring VLAN information as traffic goes between switches.
clear drip counters	Clears DRiP counters.
show vlans	Displays virtual LAN subinterfaces.

source-bridge trcrf-vlan

Use the source-bridge trcrf-vlan privileged EXEC command to attach a TrCRF VLAN to the router's virtual ring. Use the no form of the command to disable the attachment of a VLAN to the router's virtual ring.

source-bridge trcrf-vlan vlanid ring-group ringnum

no source-bridge trcrf-vlan vlanid ring-group ringnum

Syntax Description

vlanid	VLAN ID number.
ring-group ringnum	Keyword and ring number of the virtual ring.

Command Modes

Privileged EXEC

Command History

Release	Modification
11.3(4)T	This command was introduced.

Usage Guidelines

The source-bridge trcrf-vlan command is required for SRB traffic across a TRISL trunk. Use the encapsulation tr-isl command for the subinterface, prior to attaching a TrCRF VLAN to the router's ring.

Examples

Following is an example of the source-bridge trcrf-vlan command for an interface where the VLAN ID number and ring group number is specified:

interface FastEthernet4/0.2 
encapsulation tr-isl trbrf-vlan 999 bridge-num 14 
source-bridge trcrf-vlan 100 ring-group 101

Related Commands

Command	Description
show source-bridge	Displays the current source bridge configuration and miscellaneous statistics.
source-bridge ring-group	Defines or removes a ring group from the configuration.
encapsulation tr-isl trbrf-vlan	Enables TRISL, a Cisco protocol for interconnecting multiple routers and switches and maintaining Token Ring VLAN information as traffic goes between switches.