Configurable Pass-through of SIP INVITE Parameters
Download this chapter
Configurable Pass-through of SIP INVITE ParametersConfigurable Pass-through of SIP INVITE Parameters
 Feedback

Contents

Configurable Pass-through of SIP INVITE Parameters

Last Updated: September 23, 2012

The Configurable Pass-through of SIP INVITE Parameters feature enables the Cisco Unified Border Element (Cisco UBE) platform to pass through end-to-end headers at a global or dial-peer level, that are not processed or understood in a SIP trunk to SIP trunk scenario. The pass through functionality includes all or only a configured list of unsupported or non-mandatory SIP headers, and all unsupported content/MIME types.

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.

Prerequisites for Configurable Pass-through of SIP INVITE Parameters

  • Configuring the media flow-around command is required for Session Description Protocol (SDP) pass-through. When flow-around is not configured, the flow-through mode of SDP pass-through will be functional.
  • When the dial-peer media flow mode is asymmetrically configured, the default behavior is to fallback to SDP pass-through with flow-through.

Cisco Unified Border Element

  • Cisco IOS Release 15.0(1)M or a later release must be installed and running on your Cisco Unified Border Element.

Cisco Unified Border Element (Enterprise)

  • Cisco IOS XE Release 3.1S or a later release must be installed and running on your Cisco ASR 1000 Series Router.

Restrictions for Configurable Pass-through of SIP INVITE Parameters

When SDP pass-through is enabled, some of interworking that the Cisco Unified Border Element currently performs cannot be activated. These features include:

  • Delayed Offer to Early Offer Interworking
  • Supplementary Services with triggered Invites
  • DTMF Interworking scenarios
  • Fax Interworking/QoS Negotiation
  • Transcoding

Information About Configurable Pass-through of SIP INVITE Parameters

The Cisco UBE does not support end-to-end media negotiation between the two endpoints that establish a call session through the Cisco UBE. This is a limitation when the endpoints intend to negotiate codec/payload types that the Cisco UBE does not process, because currently, unsupported payload types will never be negotiated by the Cisco UBE. Unsupported content types include text/plain, image/jpeg and application/resource-lists+xml. To address this problem, SDP is configured to pass through transparently at the Cisco UBE, so that both the remote ends can negotiate media independently of the Cisco UBE.

SDP pass-through is addressed in two modes:

  • Flow-through--Cisco UBE plays no role in the media negotiation, it blindly terminates and re-originates the RTP packets irrespective of the content type negotiated by both the ends. This supports address hiding and NAT traversal.
  • Flow-around--Cisco UBE neither plays a part in media negotiation, nor does it terminate and re-originate media. Media negotiation and media exchange is completely end-to-end.

How to Configure Configurable Pass-through of SIP INVITE Parameters

Configuring Configurable Pass-through of SIP INVITE Parameters at the Global Level

To configure Unsupported Content Pass-through on a Cisco UBE platform at the global level, perform the steps in this section.

SUMMARY STEPS

1.    enable

2.    configure terminal

3.    voice service voip

4.    sip

5.    pass-thru {content {sdp | unsupp} | headers {unsupp | list tag}}

6.    exit


DETAILED STEPS
 Command or ActionPurpose
Step 1
enable


Example:

Router> enable

 

Enables privileged EXEC mode.

  • Enter your password if prompted.
 
Step 2
configure terminal


Example:

Router# configure terminal

 

Enters global configuration mode.

 
Step 3
voice service voip


Example:

Router(config)# voice service voip

 

Enters voice service VoIP configuration mode.

 
Step 4
sip


Example:

Router(conf-voi-serv)# sip

 

Enters SIP configuration mode.

 
Step 5
pass-thru {content {sdp | unsupp} | headers {unsupp | list tag}}


Example:

Router(conf-serv-sip)# pass-thru content unsupp

 

Passes the SDP transparently from in-leg to the out-leg with no media negotiation.

 
Step 6
exit


Example:

Router(conf-serv-sip)# exit

 

Exits the current mode.

 

Configuring Configurable Pass-through of SIP INVITE Parameters at the Dial Peer Level

To configure Unsupported Content Pass-through on a Cisco UBE platform at the dial-peer level, perform the steps in this section.

SUMMARY STEPS

1.    enable

2.    configure terminal

3.    dial-peer voice tag voip

4.    voice-class sip pass-thru {content {sdp | unsupp} | headers {unsupp | list tag}} [system]

5.    exit


DETAILED STEPS
 Command or ActionPurpose
Step 1
enable


Example:

Router> enable

 

Enables privileged EXEC mode.

  • Enter your password if prompted.
 
Step 2
configure terminal


Example:

Router# configure terminal

 

Enters global configuration mode.

 
Step 3
dial-peer voice tag voip


Example:

Router(config)# dial-peer voice 2 voip

 

Enters dial peer VoIP configuration mode.

 
Step 4
voice-class sip pass-thru {content {sdp | unsupp} | headers {unsupp | list tag}} [system]


Example:

Router(config-dial-peer)# voice-class sip pass-thru content sdp

 

Passes the SDP transparently from in-leg to the out-leg with no media negotiation.

 
Step 5
exit


Example:

Router(config-dial-peer)# exit

 

Exits the current mode.

 

Feature Information for Configurable Pass-through of SIP INVITE Parameters

The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.

Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.

Feature History Table entry for the Cisco Unified Border Element.

Table 1Feature Information for Configurable Pass-through of SIP INVITE Parameters

Feature Name

Releases

Feature Information

Configurable Pass-through of SIP INVITE Parameters

15.0(1)M

This feature enables the Cisco UBE to pass through end-to-end headers at a global or dial-peer level, that are not processed or understood in a SIP trunk to SIP trunk scenario. The pass through functionality includes all or only a configured list of unsupported or non-mandatory SIP headers, and all unsupported content/MIME types.

This feature introduces the following commands: pass-thruand voice-class sip pass-thru.

Feature History Table entry for the Cisco Unified Border Element (Enterprise).

Table 2Feature Information for Configurable Pass-through of SIP INVITE Parameters

Feature Name

Releases

Feature Information

Configurable Pass-through of SIP INVITE Parameters

Cisco IOSXE Release 3.1S

This feature enables the Cisco UBE to pass through end-to-end headers at a global or dial-peer level, that are not processed or understood in a SIP trunk to SIP trunk scenario. The pass through functionality includes all or only a configured list of unsupported or non-mandatory SIP headers, and all unsupported content/MIME types.

This feature introduces the following commands: pass-thruand voice-class sip pass-thru.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2012 Cisco Systems, Inc. All rights reserved.