Contents
B - C - D - F - I - L - M - P - Q - R - S - T - U - W -Index
B
benefits 1
C
configuration examples
pipe mode with an explicit NULL LSP 1
short pipe mode 1
uniform mode 1
D
differentiated services code point 1
DiffServ as a standardization of QoS 1
F
features 1
I
IP precedence field 1
L
layer management 1
M
MPLS EXP field, setting 1
P
packets, forwarding 1
pipe mode with an explicit NULL LSP
configuring 1
operating procedure 1
overview 1
policing 1
prerequisites for MPLS DiffServ tunneling modes 1
Q
QoS
providing to an IP packet 1
providing to an MPLS packet 1
services supported 1
transparency 1
using in MPLS tunneling 1
R
restrictions for MPLS DiffServ tunneling modes 1
S
service level agreements 1
short pipe mode
configuring 1
operating procedure 1
overview 1
signaling
LSPs 1
T
TSP tunnel 1
tunneling 1
tunneling modes
benefits 1
brief descriptions 1
configuration examples 1
configuring 1
determining the appropriate mode 1
features 1
operation 1
prerequisites 1
U
uniform mode
configuring 1
operating procedure 1
overview 1
W
weighted random early detection 1
MPLS Traffic Engineering DiffServ Configuration Guide, Cisco IOS XE Release 3S
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- March 29, 2013
Feedback