Feedback
Contents
- Contextual Configuration Diff Utility
- Finding Feature Information
- Prerequisites for Contextual Configuration Diff Utility
- Restrictions for Contextual Configuration Diff Utility
- Information About Contextual Configuration Diff Utility
- Benefits of the Contextual Configuration Diff Utility
- Contextual Configuration Diff Utility Output Format
- How to Use the Contextual Configuration Diff Utility
- Performing a Line-by-Line File Comparison Using the Contextual Configuration Diff Utility
- Configuration Examples for the Contextual Configuration Diff Utility
- Diff Operation Example
- Incremental Diff Operation Example
- Additional References
- Feature Information for Contextual Configuration Diff Utility
Contextual Configuration Diff Utility
The Contextual Configuration Diff Utility feature provides the ability to perform a line-by-line comparison of any two configuration files (accessible through the Cisco IOS XE Integrated File System [IFS]) and generate a list of the differences between them. The generated output includes information regarding configuration lines that have been added, modified, or deleted, and the configuration modes within which a changed configuration line exists.
- Finding Feature Information
- Prerequisites for Contextual Configuration Diff Utility
- Restrictions for Contextual Configuration Diff Utility
- Information About Contextual Configuration Diff Utility
- How to Use the Contextual Configuration Diff Utility
- Configuration Examples for the Contextual Configuration Diff Utility
- Additional References
- Feature Information for Contextual Configuration Diff Utility
Finding Feature Information
Your software release may not support all the features documented in this module. For the latest caveats and feature information, see Bug Search Tool and the release notes for your platform and software release. To find information about the features documented in this module, and to see a list of the releases in which each feature is supported, see the feature information table at the end of this module.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Prerequisites for Contextual Configuration Diff Utility
The format of the configuration files used for the Contextual Configuration Diff Utility feature must comply with standard Cisco IOS XE configuration file indentation rules as follows:
- Start all commands on a new line with no indentation, unless the command is within a configuration submode.
- Indent commands within a first-level configuration submode one space.
- Indent commands within a second-level configuration submode two spaces.
- Indent commands within subsequent submodes accordingly.
The router must have a contiguous block of memory larger than the combined size of the two configuration files being compared.
Restrictions for Contextual Configuration Diff Utility
If the device does not have a contiguous block of memory larger than the combined size of the two configuration files being compared, the diff operation fails.
Information About Contextual Configuration Diff Utility
- Benefits of the Contextual Configuration Diff Utility
- Contextual Configuration Diff Utility Output Format
Benefits of the Contextual Configuration Diff Utility
The Contextual Configuration Diff Utility feature provides the ability to perform a line-by-line comparison of any two configuration files (accessible through the Cisco IOS XE File System [IFS]) and generate a list of the differences between them. The generated output includes information regarding the following items:
- Configuration lines that have been added, modified, or deleted.
- Configuration modes within which a changed configuration line exists.
- Location changes of configuration lines that are order-sensitive. For example, the ip access-list and community-lists commands are order-sensitive commands dependent on where they are listed within a configuration file in relation to other Cisco IOS XE commands of similar type.
Contextual Configuration Diff Utility Output Format
Diff Operation
The Contextual Configuration Diff Utility feature uses the filenames of two configuration files as input. A diff operation is performed on the specified files and a list of differences between the two files is generated as output by using the show archive config differences command. Interpreting the output is dependent on the order in which the two files are specified in the command. In this section, we assume that the filename of the file entered first is file1 and the filename of the file entered second is file2. Each entry in the generated output list is prefixed with a unique text symbol to indicate the type of difference found. The text symbols and their meanings are as follows:
- A minus symbol (-) indicates that the configuration line exists in file1 but not in file2.
- A plus symbol (+) indicates that the configuration line exists in file2 but not in file1.
- An exclamation point (!) with descriptive comments identifies order-sensitive configuration lines whose location is different in file1 than in file2.
Incremental Diff Operation
Some applications require that the generated output of a diff operation contain configuration lines that are unmodified (in other words, without the minus and plus symbols). For these applications, an incremental diff operation can be performed by using the show archive config incremental-diffs command, which compares a specified configuration file to the running configuration file ().
When an incremental diff operation is performed, a list of the configuration lines that do not appear in the running configuration file (in other words, configuration lines that appear only in the specified file that is being compared to the running configuration file) is generated as output. An exclamation point (!) with descriptive comments identifies order-sensitive configuration lines whose location is different in the specified configuration file than in the running configuration file.
How to Use the Contextual Configuration Diff Utility
Performing a Line-by-Line File Comparison Using the Contextual Configuration Diff Utility
DETAILED STEPS
Configuration Examples for the Contextual Configuration Diff Utility
Diff Operation Example
In this example, a diff operation is performed on the running and startup configuration files. The table below shows the configuration files used for this example.
| Table 1 | Configuration Files Used for the Diff Operation Example |
|
Running Configuration File |
Startup Configuration File |
|---|---|
no ip subnet-zero ip cef interface FastEthernet1/0 ip address 10.7.7.7 255.0.0.0 no ip route-cache no ip mroute-cache duplex half no ip classless snmp-server community public RO |
ip subnet-zero ip cef ip name-server 10.4.4.4 voice dnis-map 1 dnis 111 interface FastEthernet1/0 no ip address no ip route-cache no ip mroute-cache shutdown duplex half ip default-gateway 10.5.5.5 ip classless access-list 110 deny ip any host 10.1.1.1 access-list 110 deny ip any host 10.1.1.2 access-list 110 deny ip any host 10.1.1.3 snmp-server community private RW |
The following is sample output from the show archive config differencescommand. This sample output displays the results of the diff operation performed on the configuration files in the table below.
Router# show archive config differences system:running-config nvram:startup-config
+ip subnet-zero
+ip name-server 10.4.4.4
+voice dnis-map 1
+dnis 111
interface FastEthernet1/0
+no ip address
+shutdown
+ip default-gateway 10.5.5.5
+ip classless
+access-list 110 deny ip any host 10.1.1.1
+access-list 110 deny ip any host 10.1.1.2
+access-list 110 deny ip any host 10.1.1.3
+snmp-server community private RW
-no ip subnet-zero
interface FastEthernet1/0
-ip address 10.7.7.7 255.0.0.0
-no ip classless
-snmp-server community public RO
Incremental Diff Operation Example
In this example, an incremental diff operation is performed on the startup and running configuration files. The table below shows the configuration files used for this example.
| Table 2 | Configuration Files Used for the Incremental Diff Operation Example |
|
Startup Configuration File |
Running Configuration File |
|---|---|
ip subnet-zero ip cef ip name-server 10.4.4.4 voice dnis-map 1 dnis 111 interface FastEthernet1/0 no ip address no ip route-cache no ip mroute-cache shutdown duplex half ip default-gateway 10.5.5.5 ip classless access-list 110 deny ip any host 10.1.1.1 access-list 110 deny ip any host 10.1.1.2 access-list 110 deny ip any host 10.1.1.3 snmp-server community private RW |
no ip subnet-zero ip cef interface FastEthernet1/0 ip address 10.7.7.7 255.0.0.0 no ip route-cache no ip mroute-cache duplex half no ip classless snmp-server community public RO |
The following is sample output from the show archive config incremental-diffscommand. This sample output displays the results of the incremental diff operation performed on the configuration files in the table below.
Router# show archive config incremental-diffs startup-config
ip subnet-zero
ip name-server 10.4.4.4
voice dnis-map 1
dnis 111
interface FastEthernet1/0
no ip address
shutdown
ip default-gateway 10.5.5.5
ip classless
access-list 110 deny ip any host 10.1.1.1
access-list 110 deny ip any host 10.1.1.2
access-list 110 deny ip any host 10.1.1.3
snmp-server community private RW
Additional References
MIBs
Technical Assistance
|
Description |
Link |
|---|---|
|
The Cisco Support website provides extensive online resources, including documentation and tools for troubleshooting and resolving technical issues with Cisco products and technologies. To receive security and technical information about your products, you can subscribe to various services, such as the Product Alert Tool (accessed from Field Notices), the Cisco Technical Services Newsletter, and Really Simple Syndication (RSS) Feeds. Access to most tools on the Cisco Support website requires a Cisco.com user ID and password. |
Feature Information for Contextual Configuration Diff Utility
The following table provides release information about the feature or features described in this module. This table lists only the software release that introduced support for a given feature in a given software release train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support. To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
| Table 3 | Feature Information for Contextual Configuration Diff Utility |
|
Feature Name |
Releases |
Feature Information |
|---|---|---|
|
Contextual Configuration Diff Utility |
Cisco IOS XE Release 2.1 |
The Contextual Configuration Diff Utility feature provides the ability to perform a line-by-line comparison of any two configuration files and generate a list of the differences between them. The generated output includes information regarding configuration lines that have been added, modified, or deleted, and the configuration modes within which a changed configuration line exists. In Cisco IOS XE Release 2.1, this feature was introduced on Cisco ASR 1000 Series Routers. The following commands were modified by this feature: show archive config differences, show archive config incremental-diffs. |
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.