Table Of Contents

A - B - C - D - E - F - G - H - I - J - L - M - N - O - P - Q - R - S - T - U - V - W -

Index

A

access control list (ACL) 4-33, 4-49

aggressive VAD 4-8

arbitration algorithm 2-15

ARP commands 8-6

Assured Forwarding 4-44

assured forwarding 31 (AF31) 4-32

Asynchronous Transfer Mode (ATM) 7-3

Asynchronous Transfer Mode Peak Cell Rate (ATM PCR) 4-4

ATM and Frame Relay Service Inter-Working (SIW) 7-3

audio quality 4-2

B

bandwidth

codec affect on 4-5

consumption 4-5, 4-6

for unicast connection trunk 7-21

issues 4-4

leased lines 4-42

modifying consumption 4-7

multicast over GRE 7-12

over-provisioning 4-34

planning 4-4

PMC consumption of 4-6

point-to-point lines 4-42

provisioning 4-2

usage 4-5, 4-6

voice payload 4-7

bidirectional PIM 4-2, 4-3, 4-39

bridging channels

See also mixing

broadcast queue 4-36

buffering 4-35

burst 4-4, 4-34

C

cabling, for VIC2-2E/M interface card 3-2

call flow 2-26

call leg 5-1, 5-4

Carrier Operated Relay 3-10

Carrier Operated Relay (COR) 4-8

carrier operated relay (COR) 3-8

Carrier Operated Squelch 3-10

Carrier Operated Squelch (COS) 3-8, 4-8

central site server solution 8-1, 8-2

Cisco Hoot `n' Holler

channel mixing 2-15

use with LMR 3-1

Cisco IOS

arbitration algorithm 2-15

configuration for LMR gateway 3-7

queuing techniques 4-33

Cisco IPICS

benefits 1-1

codec 4-4

components

Cisco IPICS server 1-3

Cisco Unified IP Phone gateway 1-4

LMR gateway 1-4

networking components 1-4

overview 1-2

PMC 1-4

RMS 1-4, 2-1

deployment models 7-1

markets 1-1

multiple site model 7-2

overview 1-1

RMS configuration for mixing 2-16

single site model 7-1

voice streams supported 2-10

WAN deployment issues 4-2

Cisco IPICS capacity 6-2

Cisco IPICS server 1-3

Cisco IP Interoperability and Collaboration System

See Cisco IPICS

Cisco Multicast Manager (CMM) 4-50

Cisco Security Agent (CSA) 4-49

Cisco Unified Communications Manager 2-41

Cisco Unified Communications Manager Express 2-41, 2-42

Cisco Unified IP Phone

Cisco Communications Manager Express configuration for 2-41

Cisco Unified Communications Manager configuration for 2-41

configuring for Cisco IPICS 2-41

overview 1-4

services 2-41

Class-Based Weighted Fair Queueing (CBWFQ) 4-33

codec

bandwidth use 4-5

choosing 4-4

considerations 4-4

delay 4-4

G.711 4-4

G.729a 4-4

types in Cisco IPICS 4-4

voice quality 4-5

Committed Information Rate (CIR) 4-4, 4-34, 4-35

compressed RTP (cRTP) 4-6

connection trunk 7-13

cRTP 4-7

Customer Edge Router (CE) 7-4

D

Data MDT 7-5, 7-9

Data Multicast Distribution Tree (MDT) 7-4

Default-MDT 7-4, 7-5

delay 4-2, 4-32, 4-35

dense mode (SM) 4-2

deployment scenario

central site server solution 8-1, 8-2

remote locations solution 8-1, 8-3

remote PMC solution 8-1

destination pattern 5-3

dial peer

associated with RMS 2-13

call leg 5-1, 5-4

configuration example 2-25

destination pattern 5-3

inbound 5-2

inbound call leg 5-4

matching inbound call leg 5-4

matching outbound call leg 5-4

outbound 5-2

outbound call leg 5-4

overview 5-1

POTS 5-2

session target 5-3

VoATM (Voice over ATM) 5-2

VoFR (Voice over Frame Relay) 5-2

voice-network 5-2

Voice over IP (VoIP) 5-2

dial pool 6-4

dial port, usage 6-4

digital signal processor (DSP) 4-8

discard eligible (DE) 4-35, 4-44

DS0

allocation 2-2

channel optimization 2-9

conserving resources 6-2

loopback channels 2-2

remote location requirements 2-9

resource allocation 2-9, 2-24

resource consumption 2-7, 2-22

resources 2-21

resources not required 2-21

sizing considerations 6-2

usage 6-2

use in mixing channels 2-12

DSCP per-hop behaviors (Fibs) 4-43

DSP

channel optimization 2-9

signal detection 4-8

dspfarm 2-9

duplicate packets 2-21

E

E1 interface 2-12

ear and mouth (E&M)

analog signaling types 3-4

interface 3-1

interface card 3-4

port 4-37

Type III interface 3-5

Type II interface 3-4

Type V interface 3-6

egress policing 4-44

egress shaping 4-43

endpoints

communication between 2-7, 2-11

duplicate packets 2-21

expedited forwarding (EF) 4-32

F

feedback tones, for trunked radios 3-51

firewall 4-49

following 2-3

Frame Relay

broadcast queue 4-36

Committed Information Rate (CIR) in 4-35

connection with E&M port 4-37

in WAN 7-3

IP RTP Priority 4-33

LLQ 4-33

QoS 4-34

Frame Relay Traffic Shaping (FRTS) 4-35

FRF.12 fragmentation and reassembly technique 4-42

G

G.711 4-4, 7-2

G.729a 4-4

GRE tunnel 7-11

H

high latency low bandwidth connection 8-1

High-Level Data Link Control (HDLC) 4-42

hootie

See Cisco Hoot 'n' Holler

I

Internet Explorer, adjusting browser settings 8-7

Internet Group Management Protocol (IGMP) 2-17

interoperability and collaboration 1-2

IP precedence 4-32

IP RTP Priority 4-32, 4-33

IPSSec VPN 7-13

J

jitter 4-2, 4-32, 4-35

L

land mobile radio

See LMR

LEAF 7-4

leased line 7-3

licences

for Cisco IPICS 6-1

usage 6-1

Link Fragmentation and Interleaving (LFI) 4-42

LMR

audio connection to Cisco IPICS 3-2

channel 2-16

communication with endpoints 2-16

endpoints in 2-9

gateway

Cisco IOS configuration for 3-7

overview 3-1

radio interface 3-2

integration with Cisco IPICS 3-1

interface with Cisco IPICS 3-2

recording multicast traffic 3-56

use with Cisco Hoot'n' Holler 3-1

loopback 2-1, 2-2, 2-11, 2-12

loopback interface 4-39

Low-Latency Queuing (LLQ) 4-32, 4-33, 4-35

M

M1:U12:M2

connection trunk 7-16, 8-3

description 7-13

unicast connection trunk 4-6, 7-18

with multicast singularities 7-22

markets, for Cisco IPICS 1-1

mixing

arbitration algorithm 2-15

audio 2-17

channels in VTG 2-11

channels using Cisco Hoot'n' Holler 2-15

DSP function 4-8

example 2-15

unicast streams 2-24

voice streams 2-17, 4-8

MPLS

in multiple site model 7-2

VPN 7-3

with multicast VPN 7-3

multicast 2-24, 4-6, 7-2

address for VTG communication 2-11

address pool 2-2, 2-9

bandwidth 7-12

bidirectional PIM 4-39

call flow to unicast 2-28

endpoints, communication between 2-7

GRE tunnel 7-24

island

overview 7-10

topology 7-10

M1:U12:M2 connection trunk 7-24

output stream 2-15

over GRE 7-11

singularity

GRE tunnel 7-22

M1:U12:M2 connection trunk 7-22

overview 7-21

multicast address, guidelines for using 4-48

multicast domain 7-2, 7-4, 7-5

Multicast Virtual Route Forwarding (MVRF) 7-4

multicast VPN (MVPN) 7-4

provider network configuration for 7-5

provider network verification 7-7

routing 7-5

Multilink Point-to-Point Protocol (MLPPP) 4-42

multiple site model

connectivity options 7-3

overview 7-2

topology 7-3

Multiprotocol Label Switching

See MPLS

N

network

management 4-50

security in 4-48

networking components, overview 1-4

O

over-detection 4-8

over-provisioning 4-34

P

packet

buffering 4-35

delay 4-32

discard-eligible (DE) 4-35

drop 4-35

errors 4-2

loss 4-2, 4-32, 4-35

packet rate 4-36

Permanent Virtual Circuit (PVC) 4-3

PIM-SSM 7-4

ping-pong effect 3-51

Plain Old Telephone Service (POTS), for unicast connection 2-26

PMC

bandwidth consumption 4-6

overview 1-4

remote location 2-24, 4-2, 4-45

remote user 2-24

PMC upload log frequency, disabling 8-7

point-to-point connection 4-42

Point-to-Point Protocol (PPP) 4-42

policing 4-44

policy engine SIP provider 2-38

Protocol Independent Multicast (PIM)

bidirectional 4-2, 4-3

dense mode (DM) 4-2

overview 4-2

sparse mode (SM) 4-2

Provider Edge Router (PE) 7-4, 7-5

Provider Router (P) 7-4

proxy channel 7-15

Push-to-Talk Management Center

See PMC

Q

QoS

at WAN edge 4-43

factors affecting 4-32

in enterprise 4-44

in Frame Relay network 4-34

in LAN 4-43

in multiple site model 7-3

overview 4-32

policing 4-44

queuing 4-44

recommendations for networks 4-32

trust boundary 4-44

WAN, use in 4-2

with point-to-point connections 4-42

Quality of Service

See QoS

queuing

overview 4-44

techniques 4-32, 4-35

queuing techniques 4-33

R

RADIUS 4-49

Real-time Transport Protocol (RTP) 4-6

recording

multicast LMR traffic 3-56

Tap Cisco IOS configuration 3-56

redundant RMS configuration 4-9

remote location 2-2, 2-9, 2-24, 4-2, 4-45

remote locations solution 8-1, 8-3

remote PMC solution 8-1

remote PMC user 2-24

rendezvous point (RP) 4-2, 4-39

Reverse Path Forwarding (RPF) 4-3

RMS

active 4-9

bridging 2-15

configuration example 2-3

configuration for central site deployment scenario 8-5

configuration for remote locations deployment scenario 8-5

dial peers associated with 2-13

DS0 2-2, 2-7, 2-9

DS0 resources 2-21, 2-22

failover 4-9

fall back 4-9

function 2-1

function in Cisco IPICS 2-7

installation options 2-2

in WAN that is not multicast enabled 4-6

mixing 2-15, 2-16, 2-17

overview 1-4

redundancy 4-9

resource allocation 2-9

resource consumption 2-7, 2-9

standby 4-9

voice port configuration 2-15

voice ports associated with 2-13

RMS comparator 8-6

router media service

See RMS

RTP, header compression 4-7

S

satellite link 8-1

Secure Socket Layer (SSL) 4-49

security

access control list (ACL) 4-49

Cisco Security Agent (CSA) 4-49

firewall 4-49

for Cisco IPICS 4-48

RADIUS 4-49

recommendations 4-49

Secure Socket Layer (SSL) 4-49

spanning tree (STP) attack mitigation 4-50

TACACS+ 4-49

serialization 4-32

service access point (SAP) broadcast 4-36

session target 5-3

shared tree

bidirectional 4-2

forwarding traffic 4-3

in PIM SIM 4-2

unidirectional 4-2

single site model

benefits 7-2

best practices 7-2

design characteristics 7-1

overview 7-1

topology 7-2

SIP

connection to RMS using 2-24

in remote location 4-2

signaling flow 2-27

unicast call, set up 2-26

SIP provider

configuring for Cisco IPICS 2-38

description 2-38

for policy engine 1-4

spanning tree (STP) attack mitigation 4-50

sparse mode (SM) 4-2

Sustained Cell Rate 4-4

T

T1 interface 2-12

TACACS+ 4-49

Time to Live (TTL) 2-29

tone control

2-wire configuration for single frequency 3-39

4-wire configuration for single frequency 3-40

channel configurations in Cisco IPICS 3-51

configuration for two-ten frequencies 3-42

considerations 3-12

frequencies 3-16

manual tone configuration 3-14

native functionality 3-12

overview 3-1

phases 3-15

signaling 3-8, 3-15

topology

MPLS with multicast VPN 7-4

multicast island 7-10

multiple site model 7-3

single site model 7-2

trunked radio

feedback tones 3-51

hybrid configuration 3-52

trust boundary 4-44

U

UDP port 4-33

under-detection 4-8

unicast

call flow to multicast 2-28

connection set up 2-27

connection trunk 7-18

in WAN that is not multicast enabled 4-6

POTS use for connection 2-26

stream mixing 2-24

V

VIC2-2E/M interface card

cabling 3-2

overview 3-2

virtual interface (VIF) 2-15

Virtual Private Network (VPN) 7-3

virtual talk group

See VTG

voice activation detection (VAD)

aggressive 4-8

conventional 4-8

enabling 4-8

overview 4-8

use with LMR 3-8

Voice and Video Enabled IP Security Protocol (IPSec) 7-3

voice packet 4-7

voice payload 4-7

voice port

associating IP address with 2-15

configuration example 2-25

voice quality 4-5, 4-8, 4-32, 4-36

voice stream mixing

See mixing

voice streams, supported in Cisco IPICS 2-10

VoIP bearer traffic 4-45

VoIP traffic, transmission rate 4-5

VPN 7-4

VTG

about 2-11

communication between channels 2-11

creation 2-11

LMR endpoints in 2-9

members 2-11

mixing channels in 2-15

mixing of channels 2-11

multicast address 2-11

multicast address requirements 2-9

participants speaking simultaneously 2-15

restricting access 2-23

RMS resource consumption 2-9

W

Weighted-Fair Queuing (WFQ) 4-33