Feedback
|
Table Of Contents
Cisco 100-Gigabit Ethernet Transceiver Modules Compatibility Matrix
Obtaining Documentation and Submitting a Service Request
Cisco 100-Gigabit Ethernet Transceiver Modules Compatibility Matrix
Revised: August 21, 2012
Note
For the clearest readability of these tables, use the PDF version located in the upper right-side of your browser screen. The HTML version might misalign the table data.
Note
Because requirements and procedures for initial configurations and software upgrades tend to change, you should always refer to the switch or router software release notes for the latest information. Before installing, configuring, or upgrading a switch, refer to the product release notes on Cisco.com for the latest information. This compatibility matrix does not replace or supercede the release notes.
This publication lists the Cisco platforms and the minimum required software versions to support 100-Gigabit Ethernet transceiver modules. Table 1 lists the model numbers and operating wavelengths for the available 100-Gigabit Ethernet transceiver modules.
Table 1 100-Gigabit Ethernet Transceiver Modules
Model Number Transceiver DescriptionCFP-100G-LR4
100GBASE-LR4 CFP transceiver module for SMF, 1310-nm wavelength, SC duplex connector
Table 2 lists the Cisco platforms that support the 100-Gigabit Ethernet transceiver modules and the minimum software requirements.
Table 3 lists the data center switching minimum software release requirements.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What's New in Cisco Product Documentation as an RSS feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service. Cisco currently supports RSS Version 2.0.
![]()
Feedback