Table Of Contents
About This Guide
Objectives
Document Revision History
Organization of This Guide
Related Documentation
Document Conventions
Obtaining Documentation, Obtaining Support, and Security Guidelines
About This Guide
This section describes the objectives and organization of this document and explains how to find information on related products and services:
•
Objectives
•Document Revision History
•Organization of This Guide
•Related Documentation
•Document Conventions
•Obtaining Documentation, Obtaining Support, and Security Guidelines
Objectives
This document describes the configuration and troubleshooting of SPA interface processors (SIPs) and shared port adapters (SPAs) that are supported on a Cisco 10000 series router.
Document Revision History
Table 1 records technical changes to this document.
Table 1 Document Revision History
Release No.
|
Revision
|
Date
|
Change Summary
|
12.2(33)SB
|
OL-13839-04
|
April 2008
|
First release of the document.
|
12.2(33)SB2
|
OL-13839-03
|
September 2008
|
Introduced the following hardware on the Cisco 10000 series router for PRE4:
•8-Port Gigabit Ethernet SPA
|
12.2(33)XNE
|
OL-13839-04
|
November 2009
|
Introduced the following hardware on the Cisco 10000 series router for PRE4:
•2-Port Channelized OC-12/DS0 Shared Port Adapter (SPA)
|
Organization of This Guide
This document contains the following chapters:
Chapter
|
Title
|
Description
|
1
|
Using Cisco IOS Software
|
Provides an introduction to accessing the command-line interface (CLI) and using the Cisco IOS software and related tools.
|
2
|
SIP and SPA Product Overview
|
Introduces the SIP and SPA products on the Cisco 10000 series router, and describes optics compatibility.
|
3
|
Cisco 10000 SIP-600 Overview
|
Describes release history, and feature and Management Information Base (MIB) support for the SIP on the Cisco 10000 series router.
|
4
|
SIP Command Summary
|
Lists commands related to monitoring the SIP on the Cisco 10000 series router.
|
5
|
Gigabit Ethernet SPA Overview
|
Describes release history, feature, and Management Information Base support, and introduces the Gigabit Ethernet SPA architecture on the Cisco 10000 series router.
|
6
|
Configuring Gigabit Ethernet SPAs
|
Describes the related configuration and verification information for the Gigabit Ethernet SPAs on the Cisco 10000 series router.
|
7
|
Gigabit Ethernet SPA Command Summary
|
Lists commands related to configuring and monitoring the Gigabit Ethernet SPAs on the Cisco 10000 series router.
|
8
|
Upgrading Field-Programmable Devices
|
Provides information about upgrading the field-programmable devices (FPDs) on the Cisco 10000 series router.
|
9
|
Channelized SPA Overview
|
Describes release history, feature and Management Information Base (MIB) support, and an introduction to the Channelized SPA architecture on the Cisco 10000 series router.
|
10
|
Configuring Channelized SPAs
|
Describes the related configuration and verification information for the Channelized SPA on the Cisco 10000 series router.
|
11
|
FPD Command Summary
|
Lists commands related to configuring and monitoring FPD images and upgrades on the Cisco 10000 series router.
|
12
|
SIP and SPA Commands
|
Describes Cisco IOS software command reference information including syntax, usage guidelines, and examples for all new and modified commands related to SIP and SPA configuration and maintenance in an alphabetical format.
|
13
|
Troubleshooting the SIP
|
Describes techniques that you can use to troubleshoot the operation of the SIP on the Cisco 10000 series router.
|
14
|
Troubleshooting Gigabit Ethernet SPAs
|
Describes techniques that you can use to troubleshoot the operation of the Gigabit Ethernet SPAs on the Cisco 10000 series router.
|
Related Documentation
For complete planning, installation, and configuration information for the Cisco 10000 series router, see the following documents at:
http://cisco.com/en/US/products/hw/routers/ps133/tsd_products_support_series_home.html
Document Conventions
In the software configuration guides, the term router refers to Cisco routers, access servers, and switches. These networking devices that support Cisco IOS software are shown interchangeably within examples. These products are used only for illustrative purposes. An example that shows one product does not necessarily indicate that other products are not supported.
This document uses the following conventions:
Convention
|
Description
|
^ or Ctrl
|
The key combination ^D or Ctrl-D means hold down the Control key while you press the D key. Keys are indicated in capital letters but are not case sensitive.
|
string
|
A string is a nonquoted set of characters shown in italics. For example, when setting an SNMP community string to public, do not use quotation marks around the string or the string will include the quotation marks.
|
Command syntax descriptions use the following conventions:
Convention
|
Description
|
bold
|
Bold text indicates commands and keywords that you enter as shown.
|
italics
|
Italic text indicates arguments for which you supply values.
|
[x]
|
Square brackets enclose an optional element (keyword or argument).
|
|
|
A vertical line indicates a choice within an optional or required set of keywords or arguments.
|
[x | y]
|
Square brackets enclosing keywords or arguments separated by a vertical line indicate an optional choice.
|
{x | y}
|
Braces enclosing keywords or arguments separated by a vertical line indicate a required choice.
|
Nested sets of square brackets or braces indicate optional or required choices within optional or required elements. For example:
Convention
|
Description
|
[x {y | z}]
|
Braces and a vertical line within square brackets indicate a required choice within an optional element.
|
Examples use the following conventions:
Convention
|
Description
|
|
Examples of information displayed on the window appear in courier font.
|
|
Examples of text that you must enter are in courier bold font.
|
< >
|
Angle brackets enclose text that is not printed to the window, such as passwords.
|
!
|
An exclamation point at the beginning of a line indicates a comment line. (Exclamation points also appear in Cisco IOS software for certain processes.)
|
[ ]
|
Square brackets enclose default responses to system prompts.
|
The following conventions are used:
Caution Means
reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in this guide.
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
