Table Of Contents

FPD Command Summary

FPD Command Summary

---

Table 11-1 provides an alphabetical list of some of the related commands to configure, monitor, and upgrade FPD images for SPAs on the Cisco 10000 series router. For more information about the commands, see Chapter 12, "SIP and SPA Commands," in this guide and also the Cisco IOS Release 12.2 software command reference and master index.

.

Table 11-1 FPD Command Summary 

Command	Description
Router# show hw-module all fpd	Displays the current versions of all FPDs for all of the supported card types on a router.
Router# show hw-module slot fpd	Displays the current versions of all FPDs for a SIP in the specified slot location and for all of the SPAs installed in that SIP or any FPD-capable cards.
Router# show hw-module subslot fpd	Displays the current versions of all FPDs for a particular SPA or all of the active SPAs on a router.
Router# show upgrade fpd package default	Displays which FPD image package is needed for the router to properly support the SPAs or other FPD-capable cards.
Router# show upgrade fpd progress	Displays the progress of the FPD upgrade while an FPD upgrade is taking place.
Router# show upgrade fpd table	Displays various information used by the Cisco IOS software to manage the FPD image package file.
Router# upgrade hw-module slot fpd	Manually upgrades the current FPD image package on a SIP.
Router# upgrade hw-module subslot fpd	Manually upgrades the current FPD image on the specified SPA.