Feedback
Table Of Contents
Numerics - A - B - C - D - E - F - G - H - I - L - M - N - O - P - Q - R - S - T - U - V - W -
Index
Numerics
304 header merger error 2-60
A
ACE
initialization failure 2-85, 2-86
logging, enabling 1-28
logging levels 1-3
logging overview 1-1
network processor error 2-93
physical memory for load-balancing 2-91
subsystem levels 1-3
ACL resources
minimum not guaranteed 2-18
usage beyond limit 2-18
address translation slot
created 2-30
deleted 2-30
application acceleration and optimization
ACC module configuration error 2-52, 2-53, 2-55, 2-57, 2-60, 2-61, 2-62, 2-63, 2-64, 2-68, 2-70
ACC module configuration error (ACE appliance only) 2-70
AppScope log record reporting errors 2-71
core daemon error 2-56
application class policy not found 2-54
ARP
collision 2-35
inspection check failure 2-33
poisoning 2-35
attacks
ARP poisoning 2-35
B
base files
not sent 2-65
refresh of base file meta data failure 2-64
reset of base file meta data failure 2-64
time stamp changed 2-65
browser unknown 2-66
buffer
error 2-50
logging to 1-9
C
cache
alignment error 2-89
cannot save delta 2-66
directory error 2-55
file deleted 2-59
invalid meta data 2-63
path error 2-63
policy, unable to apply to URL 2-58
response header, invalid 2-63
unable to create key 2-53
CacheDelta and CacheDynamic error 2-54
clearing
log messages 1-30
condenser
caching error 2-60
debug message 2-55
generic errors 2-53
trace errors 2-58
configuration
file replication failure 2-78
connection
pool, too many connections 2-51
setup and teardown syslog messages, enabling 1-29
console
logging to 1-12
container object cache stale 2-58
content type verification
failed
unexpected number in message body 2-38
context
adding context with an associated sticky group 2-88
associated sticky group 2-88
configuration synchronization failure 2-80
removing with an associated sticky group 2-88
show command failure 2-89
state change 2-80
sticky entry request 2-88
control processor, unrecognized message 2-94
cookie
cookie not found message 2-65
CP queue, full 2-85
critical messages 3-2
critical semaphore error 2-68
D
debugging messages 3-13
debug logging failure 2-95
debug messages, generic 2-50
delta optimization
error message 2-55
delta stream error 2-55
disk caching
cannot read file 2-59
subsystem error 2-59
DNS
packet message 2-36
E
EMBLEM-format logging 1-15
empty container cache hit 2-65
enabling logging on the ACE 1-28
Encap table full 2-34
error messages 3-3
F
facility, changing 1-23
fault tolerance
file
content type undetermined 2-56
unable to access 2-52
Flash memory
logging to 1-18
FT group
context name mismatch 2-77
two active devices detected 2-78
FT interface, peer unreachable 2-77
FTP port command
address other than the address used in the connection 2-36
low port number 2-36
FTP traffic
strict inspection policy denies request command 2-29
unrecognized command in request message when using strict inspection policy 2-29
FT track
state down 2-83
state up 2-83
G
generic error messages 2-68
H
HA
alternate pings 2-84
communication failure 2-79
configuration replication failure 2-80
context name mismatch 2-77
context state change 2-80
CP queue, full 2-85
data dropped 2-95
FT track state down 2-83
FT track state up 2-83
heartbeat interval mismatch 2-82
heartbeats unidirectional 2-82
initialization failure 2-79
internal error 2-79
mapping failure 2-94
module 2-79
peer compatibility 2-84
peer incompatibility 2-78
receive error 2-90
redundancy heartbeat stopped 2-85
replication failure 2-78, 2-80
replication in process 2-82
state transitions 2-80
two active devices detected 2-78
hash table, invalid index 2-92
heartbeat
interval mismatch 2-82
started 2-84
unidirectional 2-82
High Availability
HTML
invalid 2-54
HTTP
body length within configured range 2-41
body matches regular expression 2-39
connect method declined 2-69
header length within configured range 2-40
host header error 2-61
invalid request 2-61
invalid request or unable to find request header 2-62
invalid response 2-61
parser unable to detect valid message 2-40
request method matches regular expression 2-39
response error 2-61
return code, threshold reached 2-95
transfer/content encoding matches regular expression 2-40
URI length within configured range 2-40
URI matches regular expression 2-39
HTTP content
instant messenger protocol detected 2-41
peer-to-peer protocol detected 2-42
tunneling protocol detected 2-41
HTTP header
generic errors (ACE appliance only) 2-70
matches regular expression 2-39, 2-41
parsing error 2-70
I
I/O error 2-51
ICMP
initialization failure 2-31
memory failure 2-32
packet denied 2-31
session established 2-28
session removed 2-28
unexpected server response 2-10
informational messages 3-10
initialization failure 2-69, 2-79, 2-85, 2-86
interfaces
configuration status down 2-37
configuration status up 2-37
line protocol change of state 2-36, 2-37
VLAN availability 2-76
invalid
cache file 2-59
cache meta data 2-63
cache response header 2-63
HTML 2-54
HTTP host header 2-61
HTTP response 2-61
lookup key 2-94
POST content 2-62
stream 2-52
IP header option error 2-34, 2-35
L
levels
changing 1-24
licenses
16G takes effects after reboot 2-50
evaluation time expired 2-49
evaluation time warning 2-49
failed checkout 2-48
installation completed 2-48
manager exiting 2-49
uninstall completed 2-49
limiting the syslog rate 1-26
line protocol, status change 2-36, 2-37
load balancing
cache alignment error 2-89
general error 2-86
HA data dropped 2-95
internal channel error 2-90
internal error 2-87
mapped memory 2-91
processor communications error 2-89
sticky database error 2-87, 2-92
sticky entry inconsistency 2-92
sticky error 2-88
transmit failure 2-87
unrecognized message 2-94
lock/unlock error 2-67
log files, logging levels 1-3
logging
changing message levels 1-7
connection setup and teardown syslog messages, enabling 1-29
disabling messages 1-24
EMBLEM-format logging 1-15
facility, changing 1-23
levels 1-3
log messages, clearing 1-30
message queue size, changing 1-24
overview 1-1
quick start 1-6
severity level of messages, changing 1-24
syslog output locations, specifying 1-8
syslog rate, limiting 1-26
system message timestamp, enabling 1-20
to buffer 1-9
to console 1-12
to Flash memory 1-18
to SNMP NMS 1-16
to SSH session 1-11
to Supervisor engine (ACE module) 1-17
to syslog server 1-13
to Telnet session 1-11
variables 1-3
viewing log message information 1-30
M
MAC
MAC address mapping change 2-38
mapping failure 2-94
memory error 2-50
memory mapping failure 2-95
messages
message queue size, changing 1-24
severity levels 3-1
timestamp, enabling 1-20
understanding 1-2
variables 1-3
Meta data error 2-64
meterlog class error 2-57
moving average calculation error 2-60
N
network I/O error 2-51
network processor error, sticky 2-93
notification messages 3-8
numerical codes of system messages 2-1
O
optimization bypassed 2-55
output locations
buffer 1-9
console 1-12
Flash memory 1-18
SNMP 1-16
SNMP NMS 1-16
specifying 1-8
SSH session 1-11
Supervisor module 1-17
syslog server 1-13
Telnet 1-11
Telnet session 1-11
P
peer
alternate pings 2-84
communication failure 2-79
heartbeat interval mismatch 2-82
heartbeats unidirectional 2-82
incompatibility 2-78
mapping failure 2-94
receive error 2-90
replication failure 2-78, 2-80
replication in process 2-82
performance monitoring page, unable to attain 2-68
PerProxCtx error 2-57
POST content, invalid 2-62
post data error 2-57
probe
connectivity error 2-9
connectivity error for ICMP probe 2-9
empty health probe scripts 2-7
failure due to internal error 2-8
internal error for ICMP probe 2-8, 2-9
internal error when loading script 2-7
lost script file 2-7
memory allocation failure 2-6
unable to load script 2-7
unexpected ICMP server response 2-10
unexpected server response 2-9
process ID error 2-53
processing
invalid lookup key 2-94
protocol, unknown or unsupported 2-52
proxy connection rebalanced 2-91
Q
quick start
system message logging 1-6
R
real servers
HTTP return code threshold 2-95
state change to down 2-45
state change to up 2-45
redundancy
regex resources
minimum not guaranteed 2-97
usage beyond limit 2-97
regular expression
invalid 2-54
syntax errors 2-64
reload
reasons 2-4
record 2-4
request send failed 2-62
response mode unknown 2-66
RTSP
connection, opened by ASA for specified IP address and ports 2-32
S
SCCP
command denied by inspection policy 2-76
connection preallocated for session-negotiated media streams 2-75
message over configured size dropped 2-75
message that is too small dropped 2-75
registration not completed 2-76
scripts
empty 2-7
error determining size 2-11
error reading 2-10
internal error when loading 2-7
lost file 2-7
memory allocation error 2-7
security context
added to system 2-72
removed from system 2-72
server connection
lost 2-87
rebalanced 2-91
server farms
failover back in service notification 2-43
failover to backup notification 2-42
HTTP return code threshold 2-95
severity codes of system messages 3-1
severity level messages
Level 1 messages 3-1
Level 2 messages 3-2
Level 3 messages 3-3
Level 4 messages 3-6
Level 5 messages 3-8
Level 6 messages 3-10
Level 7 messages 3-13
overview 1-3
severity levels
alerts 3-1
changing 1-24
critical 3-2
debugging 3-13
errors 3-3
informational 3-10
notifications 3-8
of messages 3-1
overview 1-3
warning 3-6
shared memory
error 2-67
log, unable to lock to access 2-57
shared memory error 2-67
show command
failure message 2-89
site security policy, averting 2-36
SNMP
daemon initialization failure 2-6
memory allocation failure 2-6
network management station 1-16
Shadow Table error 2-42
socket operation failed 2-51
spoofing attack 2-2, 2-33, 2-38
SSH
session, sending syslog messages 1-11
SSL
certificate and keys removed 2-17
CRL, failure to retrieve 2-15
SSL certificate
invalid or nonexistent 2-15
not currently valid 2-13
revoked by certificate authority 2-14
signature invalid 2-14
sticky
associated group 2-88
database error 2-87
entries added or removed 2-92
entry dropped 2-94
entry inconsistency 2-92
initialization failure 2-86
key, invalid 2-94
network processor error 2-93
request not responded to 2-91
resources exceeded 2-88
unexpected sticky group lookup result 2-91
stream, invalid 2-52
subsystems 1-3
supervisor
logging to 1-17
syslog output locations
buffer 1-9
console 1-12
Flash memory 1-18
SNMP NMS 1-16
specifying 1-8
SSH session 1-11
Supervisor engine 1-17
syslog server 1-13
Telnet session 1-11
syslog rate, limiting 1-26
syslog server
device ID, specifying 1-21
EMBLEM-format logging 1-15
identifying messages sent 1-20
sending syslog messages 1-13
system message logging
connection setup and teardown syslog messages, enabling 1-29
disabling messages 1-24
EMBLEM-format logging 1-15
facility, changing 1-23
log messages, clearing 1-30
overview 1-1
queue, changing 1-24
quick start 1-6
severity level, changing 1-24
syslog output locations, specifying 1-8
syslog rate, limiting 1-26
to buffer 1-9
to console 1-12
to Flash memory 1-18
to SNMP NMS 1-16
to SSH session 1-11
to Supervisor engine (ACE module) 1-17
to syslog server 1-13
to Telnet session 1-11
understanding 1-2
variables 1-3
viewing log message information 1-30
system messages
by numerical code 2-1
by severity code 3-1
timestamps, enabling 1-20
T
TCP
connection slot creation 2-26, 2-28
connection slot termination 2-26, 2-28
termination reasons 2-26, 2-28
TCP connection failure 2-79
Telnet
session, sending syslog messages 1-11
U
UDP
connection slot creation 2-27, 2-29
connection slot deletion 2-27, 2-29
DNS packet 2-36
unknown protocol 2-52
unknown response mode 2-66
unsupported protocol 2-52
URL
host access record 2-30
no cached information found 2-65
parsing error 2-56
unable to apply cache policy 2-58
user
user agent unknown 2-66
UTF characters 2-55
V
variables
fields 1-3
in messages 1-3
viewing log message information 1-30
VLANs
number availability 2-76
W
warning messages 3-6
warning messages, generic 2-64
write I/O error 2-71