Table Of Contents
Preface
Audience
How to Use This Guide
Related Documentation
Symbols and Conventions
Obtaining Documentation, Obtaining Support, and Security Guidelines
Preface
This guide provides instructions for configuring the features of a Cisco Application Control Engine (ACE) module installed in a Cisco Catalyst 6500 Series Switch. Information in this guide applies to all the Cisco Catalyst 6500 Series Switch models.
This preface contains the following major sections:
•
Audience
•How to Use This Guide
•Related Documentation
•Symbols and Conventions
•Obtaining Documentation
•Documentation Feedback
•Cisco Product Security Overview
•Obtaining Technical Assistance
•Obtaining Additional Publications and Information
Audience
This guide is intended for the following trained and qualified service personnel who are responsible for configuring the ACE:
•System administrator
•System operator
How to Use This Guide
This guide is organized into the following chapters:
Related Documentation
In addition to this guide, the ACE documentation set includes the following documents:
Document Title
|
Description
|
Release Note for the
Cisco Application Control Engine Module
|
Provides information on operating considerations, caveats, and command-line interface (CLI) commands for the ACE.
|
Cisco Application Control Engine Module
Hardware Installation Note
|
Provides information for installing the ACE into the Catalyst 6500 series switch.
|
Cisco Application Control Engine Module Administration Guide
|
This guide describes how to perform administration tasks on the ACE, including initial setup, establish remote access, configure class maps and policy maps, manage the ACE software, configure SNMP, define system message logging, configure redundancy, and upgrade your ACE software.
|
Cisco Application Control Engine Module
Getting Started Guide
|
This guide describes how to perform the initial setup and configuration tasks for the ACE.
|
Cisco Application Control Engine Module Virtualization Configuration Guide
|
This guide provides instructions on how to operate your ACE in a single-context or in multiple-contexts. Multiple-contexts use the concept of virtualization to partition your ACE into multiple virtual devices or contexts.
|
Cisco Application Control Engine Module Routing and Bridging Configuration Guide
|
This guide provides instructions for configuring the routing and bridging features of the ACE. This guide provides a routing overview and describes how to perform ACE configuration tasks, including:
•Configuring VLANs
•Configuring routing
•Configuring bridging
•Configuring Address Resolution Protocol (ARP)
•Configuring Dynamic Host Configuration Protocol (DHCP)
|
Cisco Application Control Engine Module Server Load-Balancing Configuration Guide
|
This guide describes how to perform ACE server load-balancing configuration tasks, including:
•Server health monitoring
•Real servers and server farms
•Stickiness
•Class maps and policy maps to load-balance traffic to real servers in server farms
•Firewall load balancing
|
Cisco Application Control Engine Module Security Configuration Guide
|
This guide describes how to perform ACE security configuration tasks, including:
•Security access control lists (ACLs)
•User authentication and accounting using a TACACS+, RADIUS, or LDAP server
•Application protocol and HTTP deep packet inspection
•TCP/IP normalization and termination parameters
•Network address translation (NAT)
|
Cisco Application Control Engine Module Command Reference
|
Provides an alphabetical list of all CLI commands including syntax, options, and related commands.
|
Cisco Application Control Engine Module System Message Guide
|
Describes how to configure system message logging on the ACE. This guide lists and describes the system log messages generated by the ACE.
|
Symbols and Conventions
This publication uses the following conventions:
Convention
|
Description
|
boldface font
|
Commands, command options, and keywords are in boldface. Bold text also indicates a command in a paragraph.
|
italic font
|
Arguments for which you supply values are in italics. Italic text also indicates the first occurrence of a new term, book title, emphasized text.
|
{ }
|
Encloses required arguments and keywords.
|
[ ]
|
Encloses optional arguments and keywords.
|
{x | y | z}
|
Required alternative keywords are grouped in braces and separated by vertical bars.
|
[x | y | z]
|
Optional alternative keywords are grouped in brackets and separated by vertical bars.
|
string
|
A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.
|
screen font
|
Terminal sessions and information the system displays are in screen font.
|
boldface screen font
|
Information you must enter in a command line is in boldface screen font.
|
italic screen font
|
Arguments for which you supply values are in italic screen font.
|
^
|
The symbol ^ represents the key labeled Control—for example, the key combination ^D in a screen display means hold down the Control key while you press the D key.
|
< >
|
Nonprinting characters, such as passwords are in angle brackets.
|
1. A numbered list indicates that the order of the list items is important.
a. An alphabetical list indicates that the order of the secondary list items is important.
•A bulleted list indicates that the order of the list topics is unimportant.
–An indented list indicates that the order of the list subtopics is unimportant.
Notes use the following conventions:
Note Means reader take note. Notes contain helpful suggestions or references to material not covered in the publication.
Cautions use the following conventions:
Caution Means
reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.
Warnings use the following conventions:
Warning Means possible physical harm or equipment damage. A warning describes an action that could cause you physical harm or damage the equipment.
For additional information about syntax formatting and navigating the ACE CLI, refer to the Cisco Application Control Engine Module Command Reference.
Obtaining Documentation, Obtaining Support, and Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
