Table Of Contents

Serverfarm Host Configuration Mode Commands

(config-sfarm-host) description

(config-sfarm-host) failaction

(config-sfarm-host) predictor

(config-sfarm-host) probe

(config-sfarm-host) retcode

(config-sfarm-host) rserver

(config-sfarm-host) transparent

Serverfarm Host Real Server Configuration Mode Commands

(config-sfarm-host-rs) backup-rserver

(config-sfarm-host-rs) conn-limit

(config-sfarm-host-rs) inservice

(config-sfarm-host-rs) probe

(config-sfarm-host-rs) weight

Serverfarm Redirect Configuration Mode Commands

(config-sfarm-redirect) description

(config-sfarm-redirect) failaction

(config-sfarm-redirect) predictor

(config-sfarm-redirect) rserver

Serverfarm Redirect Real Server Configuration Mode Commands

(config-sfarm-redirect-rs) backup-rserver

(config-sfarm-redirect-rs) conn-limit

(config-sfarm-redirect-rs) inservice

(config-sfarm-redirect-rs) weight

Serverfarm Host Configuration Mode Commands

Serverfarm host configuration mode commands allow you to create and configure host server farms and associate host real servers with the server farm. Host server farms are clusters of real servers that provide Web content or services in a data center. You must configure a real server using the (config) rserver command in configuration mode before you can associate it with a server farm.

To create a host server farm and access serverfarm configuration mode, use the serverfarm command. Note that host is the default server-farm type, so you do not have to enter the host option. The CLI prompt changes to (config-sfarm-host). For information about the commands in this mode, see the following commands.

Use the no form of this command to remove a server farm from the configuration.

serverfarm [host] name

no serverfarm name

Syntax Description

host	(Optional) Specifies a server farm comprising mirrored real servers that provide Web content or services.
name	Unique identifier of the server farm. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters.

Command Modes

Configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

The commands in this mode require the server-farm feature in your user role. For details about role-based access control (RBAC) and user roles, see the Cisco Application Control Engine Module Virtualization Configuration Guide.

Examples

To create a host server farm named SFARM1, enter:

host1/Admin(config)# serverfarm SFARM1

host1/Admin(config-sfarm-host)#

To delete the server farm named SFARM1, enter:

host1/Admin(config)# no serverfarm SFARM1

Related Commands

show serverfarm

show running-config

(config-sfarm-host) description

To configure the description of a server farm, use the description command. Use the no form of this command to delete the description of a server farm.

description text

no description

Syntax Description

text	Text description of a server farm. Enter an unquoted text string with a maximum of 240 alphanumeric characters.

Command Modes

Serverfarm host configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

This command has no usage guidelines.

Examples

To configure a description of a server farm, enter:

host1/Admin(config-sfarm-host)# description CURRENT EVENTS ARCHIVE

To delete the description of a server farm, enter:

host1/Admin(config-sfarm-host)# no description

Related Commands

This command has no related commands.

(config-sfarm-host) failaction

To configure the action that the ACE takes if a real server goes down, use the failaction command. Use the no form of this command to reset the behavior of the ACE to the default of taking no action when a server fails.

failaction purge

no failaction

Syntax Description

purge

Specifies that the ACE remove the connections to a real server if that real server in the server farm fails after you configure this command. The module sends a reset (RST) both to the client and to the server that failed.

Command Modes

Serverfarm host configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

If you do not configure this command, the ACE takes no action if a server in a server farm fails. To clear connections to servers that have failed prior to entering the failaction command, use the clear conn command.

This feature is required for stateful firewall load balancing (FWLB). For details about FWLB, see the Cisco Application Control Engine Module Server Load-Balancing Configuration Guide.

Examples

To instruct the ACE to remove connections from a failed server in the server farm, enter:

host1/Admin(config-sfarm-host)# failaction purge

To reset the behavior of the ACE to the default of taking no action if a real server fails, enter:

host1/Admin(config-sfarm-host)# no failaction

Related Commands

This command has no related commands.

(config-sfarm-host) predictor

To configure the load-balancing algorithm for the server farm, use the predictor command. To remove the load-balancing algorithm, use the no form of this command.

predictor roundrobin | {leastconns [slowstart time]} | {hash {address [source | destination] [netmask]} | {cookie name1} | {header name2} | {url [begin-pattern text] [end-pattern text]}}

no predictor

Syntax Description

roundrobin	Selects the next servers in the list of real servers.
leastconns	Selects the server with the least number of connections.
slowstart time	(Optional) Specifies that the connections to the real server be in a slow-start mode for the specified duration. For the time argument, enter an integer from 1 to 65535, where 1 is the fastest ramp-up time.
hash address	Selects the server using a hash value based on the source and destination IP addresses.
source	(Optional) Selects the server using a hash value based on the source IP address.
destination	(Optional) Selects the server using a hash value based on the destination IP address.
ip-netmask	(Optional) The bits in the IP address to use for the hash. If not specified, the default is 255.255.255.255.
hash cookie cookie-name	Selects the server using a hash value based on the specified cookie name. For the cookie-name argument, enter a cookie name from 1 to 63 characters.
hash header header-name	Selects the server using a hash value based on the header name. Enter a header name from 1 to 63 characters or enter one of the following standard headers: •Accept •Accept-Charset •Accept-Encoding •Accept-Language •Authorization •Cache-Control •Connection •Content-MD5 •Expect •From •Host •If-Match •Pragma •Referrer •Transfer-Encoding •User-Agent •Via
hash url	Selects the server using a hash value based on the requested URL. Use this predictor method to load-balance cache servers. Cache servers perform better with the URL hash method because you can divide the contents of the caches evenly if the traffic is random enough. In a redundant configuration, the cache servers continue to work even if the active ACE switches over to the standby ACE. For information about configuring redundancy, refer to the Cisco Application Control Engine Module Administration Guide.
begin-pattern text	(Optional) Specifies the beginning pattern of the URL and the pattern string to parse. You cannot configure different beginning and ending patterns for different server farms that are part of the same traffic classification. Enter an unquoted text string with no spaces and a maximum of 255 alphanumeric characters for each pattern you configure. If you want to match a URL that contains spaces, you must use "\x20" (without the quotation marks) for each space character.
end-pattern text	(Optional) Specifies the ending pattern of the URL and the pattern string to parse. You cannot configure different beginning and ending patterns for different server farms that are part of the same traffic classification. Enter an unquoted text string with no spaces and a maximum of 255 alphanumeric characters for each pattern you configure. If you want to match a URL that contains spaces, you must use "\x20" (without the quotation marks) for each space character.

Command Modes

Server-farm host configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

Use this command to define the load-balancing algorithm used in choosing a real server in the server farm. If you do not specify the predictor command, the default algorithm is roundrobin. Using the no form of this command changes the configured predictor algorithm to the default algorithm.

---

Note The only time the sequence of servers starts over at the beginning (with the first server) is when there is a configuration or server state change (for example, a probe failure).

---

Server weights take effect only when there are open connections to the servers. When there are no sustained connections to any of the servers, the leastconns predictor method behaves like the roundrobin method.

If you configure the leastconns predictor, you can use a slowstart mechanism (ramp-up) to avoid sending a high rate of new connections to the servers that have just been put in service. The real server with the fewest number of active connections will get the next connection request for the server farm with the leastconns predictor. The ramp-up stops when the duration timer that you specify expires.

Examples

To specify the leastconns load-balancing algorithm for the server farm, enter:

host1/Admin(config-sfarm-host)# predictor leastconns

To remove load-balancing algorithm from the server farm, enter:

host1/Admin(config-sfarm-host)# no predictor

Related Commands

This command has no related commands.

(config-sfarm-host) probe

Use probes to monitor the health of real servers in a server farm. To associate a probe with a server farm, use the probe command. Use the no form of this command to dissociate a probe from a server farm.

probe probe-name

no probe probe-name

Syntax Description

probe-name

Identifier of an existing probe that you want to associate with a server farm. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters.

Command Modes

Serverfarm host configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

The probe must already exists. To create a probe, see the command. You can associate multiple probes of the same or different protocols with each server farm.

Examples

To associate a probe with a server farm, enter:

host1/Admin(config-sfarm-host)# probe TCP1

To dissociate a probe from a server farm, enter:

host1/Admin(config-sfarm-host)# no probe TCP1

Related Commands

(config) probe

(config-sfarm-host) retcode

To associate a return code map for HTTP return-code checking with a server farm, use the retcode command. Use the no form of this command to dissociate a return code.

retcode number1 number2 check count

no retcode number1 number2 check count

Syntax Description

number1	The minimum value for an HTTP return code. Enter an integer from 100 to 599. The minimum value must be less than or equal to the maximum value.
number2	The maximum value for an HTTP return code. Enter an integer from 100 to 599. The maximum value must be greater than or equal to the minimum value.
check	Checks for HTTP return codes associated with the server farm.
count	Increments the number of return codes received.

Command Modes

Server-farm host configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

You can configure multiple retcode maps for each server farm. To display retcode hit counts for each configured return code, see the show serverfarm command.

Examples

To associate a return code range from 200 to 500 inclusive with a server farm, enter:

host1/Admin(config-sfarm-host)# retcode 200 500 check count

To dissociate a return code range from a server farm, enter:

host1/Admin(config-sfarm-host)# no retcode 200 500 check count

Related Commands

show serverfarm

(config-sfarm-host) rserver

To associate one or more existing host real servers with a server farm and access serverfarm host real server configuration mode, use the rserver command. The CLI prompt changes to (config-sfarm-host-rs). For information on commands in serverfarm host real server configuration mode, see the "Serverfarm Host Real Server Configuration Mode Commands" section. Use the no form of this command to dissociate the real server from the server farm.

rserver name [port]

no rserver name [port]

Syntax Description

name	Unique identifier of the real server. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters.
port	(Optional) The port number used for the real server port address translation (PAT). Enter an integer from 1 to 65535.

Command Modes

Serverfarm host configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

The real server must already exist. To create a real server, see the (config) rserver command. You can associate a maximum of 16,384 real servers with a server farm.

If you choose not to assign a port number for the real server association with the server farm, the default behavior by the ACE is to automatically assign the same destination port that was used by the inbound connection to the outbound server connection. For example, if the incoming connection to the ACE is a secure client HTTPS connection, the connection is typically made on port 443. If you do not assign a port number to the real server, the ACE will automatically use port 443 to connect to the server, which results in the ACE making a clear-text HTTP connection over port 443. In this case, you would typically define an outbound destination port of 80, 81, or 8080 for the backend server connection.

Examples

To associate a real server with a server farm, enter:

host1/Admin(config-sfarm-host)# rserver server1 80

To dissociate a real server from a server farm, enter:

host1/Admin(config-sfarm-host)# no rserver server1 80

Related Commands

(config) rserver

(config-sfarm-host) transparent

To prevent the network address translation (NAT) of the ACE VIP address to the server IP address, use the transparent command. Use the no form of this command to reset the ACE behavior to the default of NATing the VIP address to the server IP address.

transparent

no transparent

Syntax Description

This command has no keywords or arguments.

Command Modes

Serverfarm host configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

Use this command in firewall load balancing (FWLB) when you configure the insecure and secure sides of the firewall as a server farm. For details about FWLB, see the Cisco Application Control Engine Module Server Load-Balancing Configuration Guide.

Examples

To prevent the NAT of the ACE VIP address to the server IP address, enter:

host1/Admin(config-sfarm-host)# transparent

To reset the behavior of the ACE to the default of NATing the VIP address to the server IP address, enter:

host1/Admin(config-sfarm-host)# no transparent

Related Commands

This command has no related commands.

Serverfarm Host Real Server Configuration Mode Commands

Serverfarm host real server configuration mode commands allow you to associate a host real server with a host server farm and configure the real server attributes.

To associate one or more existing host real server with a host server farm and access serverfarm host real server configuration mode, use the rserver command in serverfarm host configuration mode. The CLI prompt changes to (config-sfarm-host-rs). For information about the commands in this mode, see the following commands. Use the no form of this command to remove the real server from the server farm.

rserver name [port]

no rserver name

Syntax Description

name	Unique identifier of the real server. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters.
port	(Optional) The port number used for the real server port address translation (PAT). Enter an integer from 1 to 65535.

Command Modes

Serverfarm host configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

The commands in this mode require the server-farm feature in your user role. For details about role-based access control (RBAC) and user roles, see the Cisco Application Control Engine Module Virtualization Configuration Guide.

The real server must already exist. To create a real server, see the (config) rserver command. You can associate a maximum of 16,384 real servers with a server farm.

Examples

To associate a real server with a server farm, enter:

host1/Admin(config-sfarm-host)# rserver SERVER1

To dissociate a real server from a server farm, enter:

host1/Admin(config-sfarm-host)# no rserver SERVER1

Related Commands

This command has no related commands.

(config-sfarm-host-rs) backup-rserver

To configure a backup real server for a real server in a server farm, use the backup real command. If a real server associated with a server farm becomes unavailable, the Application Control Engine Service Module directs flows to the configured backup real server. Use the no form of this command to remove a backup real server from the configuration.

backup-rserver name [port]

no backup-rserver

Syntax Description

name	Unique identifier of an existing real server that you want to configure as a backup server in a server farm. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters.
port	(Optional) The port number used for the backup real server port address translation (PAT). Enter an integer from 0 to 65535.

Command Modes

Serverfarm host real server configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

The real server used as a backup server must already exist. To create a real server, see the (config) rserver command.

Examples

To associate a backup real server with a server farm, enter:

host1/Admin(config-sfarm-host-rs)# backup-rserver BACKUP_SERVER1 3500

To dissociate a backup real server from a server farm, enter:

host1/Admin(config-sfarm-host-rs)# no backup-rserver

Related Commands

(config) rserver

(config-sfarm-host-rs) inservice

(config-sfarm-host-rs) conn-limit

To configure the maximum and minimum number of connections that you want to allow for a host real server in a server farm, use the conn-limit command. Use the no form of this command to reset the real server maximum connections and minimum connections limit to the defaults of 4294967295.

conn-limit max max-conns min min-conns

no conn-limit

Syntax Description

max maxconns	Specifies the maximum number of connections allowed for this real server. Enter an integer from 2 to 4294967295. The default is 4294967295.
min minconns	Specifies the connection threshold below which the real server will start accepting connections again after the number of connections exceeds the configured maximum number of connections. Enter an integer from 2 to 4294967295. The default is minconns equal to maxconns.

Command Modes

Serverfarm host real server configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

Use this command to specify the maximum number of connections and the minimum connection threshold for a host real server in a server farm. The minconns value must be less than or equal to the maxconns value. The ACE uses the minconns value as a threshold to start accepting connections again after the maxconns limit is exceeded.

Examples

To configure the maximum number of connections and the minimum connection threshold for a host real server, enter:

host1/Admin(config-sfarm-host-rs)# conn-limit max 65535 min 40000

To reset the maximum number of connections and the minimum connection threshold for a host real server to the default value of 4294967295, enter:

host1/Admin(config-sfarm-host-rs)# no conn-limit

Related Commands

This command has no related commands.

(config-sfarm-host-rs) inservice

To place a real server associated with a server farm in service, use the inservice command. Use the no form of this command to take a real server out of service.

inservice [standby]

no inservice

Syntax Description

standby

(Optional) Used with backup real servers, specifies that a backup real server remain inactive unless the primary real server fails. If the primary fails, the backup server becomes active and starts accepting connections.

Command Modes

Serverfarm host real server configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

This command requires the real-inservice feature in your user role. For details about role-based access control (RBAC) and user roles, see the Cisco Application Control Engine Module Virtualization Configuration Guide.

To start load balancing connections to a real server in a server farm, you must place the real server in service using the inservice command.

You can modify the attributes of a real server in a server farm without taking the server out of service.

Use the inservice standby command on a primary real server to provide graceful shutdown when you have sticky configured. This command instructs the ACE to do perform the following actions:

•Tear down existing non-TCP connections to the server

•Allow current TCP connections to complete

•Allow new sticky connections for existing server connections that match entries in the sticky database

•Load-balance all new connections (other than the matching sticky connections mentioned above) to the other servers in the server farm

•Eventually take the server out of service

Examples

To place a real server in service, enter:

host1/Admin(config-sfarm-host-rs)# inservice

To take a real server out of service, enter:

host1/Admin(config-sfarm-host-rs)# no inservice

Related Commands

This command has no related commands.

(config-sfarm-host-rs) probe

To configure a probe to monitor the health of a host real server in a host server farm, use the probe command. Use the no form of this command to remove the probe from the real server.

probe probe-name

no probe probe-name

Syntax Description

probe-name

Identifier of an existing probe that you want to assign to a real server to monitor its health. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters.

Command Modes

Serverfarm host real server configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

You can associate multiple probes with each real server.

Examples

To configure a probe for a host real server, enter:

host1/Admin(config-sfarm-host-rs)# probe SERVER1_PROBE

To remove a probe from a host real server, enter:

host1/Admin(config-sfarm-host-rs)# no probe SERVER1_PROBE

Related Commands

This command has no related commands.

(config-sfarm-host-rs) weight

To configure the capacity of a real server in relation to other servers in a server farm, use the weight command. The weight value you specify for a server is used in the weighted roundrobin and least connections predictor load-balancing methods. Use the no form of this command to reset the real server weight to the default value.

weight number

no weight

Syntax Description

number

Weight value assigned to a real server in a server farm. This value is used in the weighted roundrobin and least connections predictor load-balancing algorithms. Enter an integer from 0 to 100. The default is 8.

Command Modes

Serverfarm host real server configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

To specify different weight values for a host real server in a server farm, you can assign multiple IP addresses to the server. You can also use the same IP address of a real server with different port numbers.

Examples

To configure a weight value for a real server, enter:

host1/Admin(config-sfarm-host-rs)# weight 50

To reset the weight of a real server to the default value of 8, enter:

host1/Admin(config-sfarm-host-rs)# no weight

Related Commands

This command has no related commands.

Serverfarm Redirect Configuration Mode Commands

Serverfarm redirect configuration mode commands allow you to create and configure redirect server farms and associate redirect real servers with the server farm. Redirect server farms are clusters of real servers that redirect users to alternative URLs where content has been moved, either temporarily or permanently. The server farm consist only of real servers that redirect client requests to alternative locations specified by the relocation string or port number in the real server configuration. You must configure a redirect real server using the (config) rserver redirect command in configuration mode before you can associate it with a server farm.

To create a redirect server farm and access serverfarm redirect configuration mode, use the serverfarm redirect command. The CLI prompt changes to (config-sfarm-redirect). For information about the commands in this mode, see the following commands.

Use the no form of this command to remove a server farm from the configuration.

serverfarm redirect name

no serverfarm redirect name

Syntax Description

name	Unique identifier of the server farm. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters.

Command Modes

Configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

The commands in this mode require the server-farm feature in your user role. For details about role-based access control (RBAC) and user roles, see the Cisco Application Control Engine Module Virtualization Configuration Guide.

Examples

To create a redirect server farm named SFARM2, enter:

host1/Admin(config)# serverfarm redirect SFARM2

host1/Admin(config-sfarm-redirect)#

To delete the redirect server farm named SFARM2, enter:

host1/Admin(config)# no serverfarm redirect SFARM2

Related Commands

show serverfarm

show running-config

(config) rserver

(config-sfarm-redirect) description

To configure the text description of a server farm, use the description command. Use the no form of this command to delete the description of a server farm.

description text

no description

Syntax Description

text	Text description of a server farm. Enter an unquoted text string with a maximum of 240 alphanumeric characters.

Command Modes

Serverfarm redirect configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

This command has no usage guidelines.

Examples

To configure a description of a server farm, enter:

host1/Admin(config-sfarm-redirect)# description REDIRECT_NEW_SITE

To delete the description of a server farm, enter:

host1/Admin(config-sfarm-redirect)# no description

Related Commands

This command has no related commands.

(config-sfarm-redirect) failaction

To configure the action that the ACE takes if a real server goes down, use the failaction command. Use the no form of this command to reset the behavior of the ACE to the default of taking no action when a server fails.

failaction purge

no failaction

Syntax Description

purge

Specifies that the ACE remove the connections to a real server if that real server in the server farm fails. The module sends a reset (RST) both to the client and to the server that failed.

Command Modes

Serverfarm redirect configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

If you do not configure this command, the ACE takes no action if a server in a server farm fails. This feature is required for stateful firewall load balancing (FWLB). For details about FWLB, see the Cisco Application Control Engine Module Server Load-Balancing Configuration Guide.

Examples

To instruct the ACE to remove connections from a failed server in the server farm, enter:

host1/Admin(config-sfarm-redirect)# failaction purge

To reset the behavior of the ACE to the default of taking no action if a real server fails, enter:

host1/Admin(config-sfarm-redirect)# no failaction

Related Commands

This command has no related commands.

(config-sfarm-redirect) predictor

To configure the load-balancing algorithm for the server farm, use the predictor command. Use the no form of this command to remove the load-balancing algorithm.

predictor roundrobin | {leastconns [slowstart time]} | {hash {address [source | destination] [netmask]} | {cookie name1} | {header name2} | {url [begin-pattern text] [end-pattern text]}}

no predictor

Syntax Description

roundrobin	Selects the next servers in the list of real servers based on server weight.
leastconns	Selects the server with the least number of connections.
slowstart time	(Optional) Used with the leastconns predictor. Specifies that the connections to the real server be in a slow-start mode for the duration indicated by the time value. Enter an integer from 1 to 65535, where 1 is the fastest ramp-up time.
hash address	Selects the server using a hash value based on the source and destination IP addresses.
source	(Optional) Selects the server using a hash value based on the source IP address.
destination	(Optional) Selects the server using a hash value based on the destination IP address.
ip-netmask	(Optional) The bits in the IP address to use for the hash. If not specified, the default is 255.255.255.255.
hash cookie-name	Selects the server using a hash value based on the cookie name. Enter a cookie name from 1 to 63 characters.
hash header-name	Selects the server using a hash value based on the header name. Enter a header name from 1 to 63 characters or enter one of the following standard headers: •Accept •Accept-Charset •Accept-Encoding •Accept-Language •Authorization •Cache-Control •Connection •Content-MD5 •Expect •From •Host •If-Match •Pragma •Referrer •Transfer-Encoding •User-Agent •Via
hash url	Selects the server using a hash value based on the requested URL. Use this predictor method to load-balance cache servers. Cache servers perform better with the URL hash method because you can divide the contents of the caches evenly if the traffic is random enough. In a redundant configuration, the cache servers continue to work even if the active ACE switches over to the standby ACE. For information about configuring redundancy, refer to the Cisco Application Control Engine Module Administration Guide.
begin-pattern text	(Optional) Specifies the beginning pattern of the URL and the pattern string to parse. You cannot configure different beginning and ending patterns for different server farms that are part of the same traffic classification. Enter an unquoted text string with no spaces and a maximum of 255 alphanumeric characters for each pattern you configure. If you want to match a URL that contains spaces, you must use "\x20" (without the quotation marks) for each space character.
end-pattern text	(Optional) Specifies the ending pattern of the URL and the pattern string to parse. You cannot configure different beginning and ending patterns for different server farms that are part of the same traffic classification. Enter an unquoted text string with no spaces and a maximum of 255 alphanumeric characters for each pattern you configure. If you want to match a URL that contains spaces, you must use "\x20" (without the quotation marks) for each space character.

Command Modes

Server-farm redirect configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

Use this command to define the load-balancing algorithm used in choosing a real server in the server farm. If you do not specify the predictor command, the default algorithm is roundrobin. Using the no form of this command changes the configured predictor algorithm to the default algorithm.

The hash methods do not recognize weight for the real servers. The weight assigned to the real servers is used only in the roundrobin and leastconns predictor methods. To create different weights for real servers, you can list multiple IP addresses of the cache server in the server farm. You can also use the same IP address with a different port number.

The only time the sequence of servers starts over at the beginning (with the first server) is when there is a configuration or server state change (for example, a probe failure).

If you configure the leastconns predictor, you can use a slowstart mechanism (ramp-up) to avoid sending a high rate of new connections to the servers that have just been put in service. The real server with the fewest number of active connections will get the next connection request for the server farm with the leastconns predictor. The ramp-up stops when the duration timer that you specify expires.

Examples

To specify the leastconns load-balancing algorithm for the server farm, enter:

host1/Admin(config-sfarm-redirect)# predictor leastconns slowstart 300

To remove the load-balancing algorithm from the server farm, enter:

host1/Admin(config-sfarm-redirect)# no predictor

Related Commands

This command has no related commands.

(config-sfarm-redirect) rserver

To associate one or more existing redirect real servers with a server farm and access serverfarm redirect real server configuration mode, use the rserver command. The CLI prompt changes to (config-sfarm-redirect-rs). For information on commands in serverfarm redirect real server configuration mode, see the "Serverfarm Redirect Real Server Configuration Mode Commands" section. Use the no form of this command to dissociate the real server from the server farm.

rserver name [port]

no rserver name [port]

Syntax Description

name	Unique identifier of the real server. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters.
port	(Optional) The port number used for the real server port address translation (PAT). Enter an integer from 1 to 65535.

Command Modes

Serverfarm redirect configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

The real server must already exist. To create a real server, see the (config) rserver command. You can associate a maximum of 16,384 real servers with a server farm.

Examples

To associate a real server with a server farm, enter:

host1/Admin(config-sfarm-redirect)# rserver server1 4000

To dissociate a real server from a server farm, enter:

host1/Admin(config-sfarm-redirect)# no rserver server1

Related Commands

(config) rserver

Serverfarm Redirect Real Server Configuration Mode Commands

Serverfarm redirect real server configuration mode commands allow you to associate a redirect real server with a redirect server farm and configure the real server attributes.

To associate one or more existing redirect real servers with a redirect server farm and access serverfarm redirect real server configuration mode, use the rserver command in serverfarm redirect configuration mode. The CLI prompt changes to (config-sfarm-redirect-rs). For information about the commands in this mode, see the following commands. Use the no form of this command to remove the real server from the server farm.

rserver name

no rserver name

Syntax Description

name	Unique identifier of the real server. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters.

Command Modes

Serverfarm redirect configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

The commands in this mode require the server-farm feature in your user role. For details about role-based access control (RBAC) and user roles, see the Cisco Application Control Engine Module Virtualization Configuration Guide.

The redirect real server must already exist. To create a real server, see the (config) rserver redirect command. You can associate a maximum of 16,384 real servers with a server farm.

Examples

To associate a real server with a server farm, enter:

host1/Admin(config-sfarm-redirect)# rserver server1

To dissociate a real server from a server farm, enter:

host1/Admin(config-sfarm-redirect)# no rserver server1

Related Commands

This command has no related commands.

(config-sfarm-redirect-rs) backup-rserver

To configure a backup real server for a real server in a server farm, use the backup-rserver command. If a real server associated with a server farm becomes unavailable, the ACE directs flows to the configured backup real server. Use the no form of this command to remove a backup real server from the configuration.

backup-rserver name

no backup-rserver

Syntax Description

name	Unique identifier of an existing real server that you want to configure as a backup server in a server farm. Enter an unquoted text string with no spaces and a maximum of 64 alphanumeric characters.

Command Modes

Serverfarm redirect real server configuration mode

Admin and user contexts

Command History

Release	Modification
3.0(0)A1(2)	This command was introduced.

Usage Guidelines

The real server used as a backup server must already exist. To create a redirect real server, see the (config) rserver redirect command.

Examples

To associate a backup real server with a server farm, enter:

host1/Admin(config-sfarm-redirect-rs)# backup-rserver BACKUP_SERVER1

To dissociate a backup real server from a server farm, enter:

host1/Admin(config-sfarm-redirect-rs)# no backup-rserver

Related Commands

(config) rserver

(config-sfarm-redi