Table Of Contents

Server Rebuild Instructions

Server Rebuild Instructions

---

This appendix contains the procedure for restoring the system to the shipping configuration.

---

Caution   

All data on the system is lost when you follow this procedure.

---

You will need to obtain the following floppy disk and CD-ROM shipped with the 3400 Series Servers system:

•IP/TV 3400 Series Servers Rebuild Floppy

•IP/TV 3400 Series Servers Rebuild CD-ROM

Follow these steps to restore the system to shipping configuration:

---

Step 1 Insert the floppy disk into the floppy disk drive and the CD-ROM into the CD-ROM drive and start the system unit or reset the system if it is already running.

Step 2 Enter the following information for the specific server you are rebuilding:

•For the IP/TV 3411, enter inst3411 and press Return.

•For the IP/TV 3415, enter inst3415 and press Return.

•For the IP/TV 3423, enter inst3423 and press Return.

•For the IP/TV 3431, enter inst3431 and press Return.

Step 3 Remove the floppy disk but do not remove the CD-ROM.

Step 4 Press Return to start the Restore process.

After the installation is complete, refer to "."