Table Of Contents
A - C - D - E - F - G - H - I - K - L - N - P - Q - R - S - T - U -
Index
A
accessing
primary GSSM GUI 5-1
remote connection 3-1
serial connection 3-1
activating GSS devices 5-3, 6-1
activating GSS devices in the CLI 6-1
activating GSS devices in the GUI 5-3
autosense, configuring for interface 4-12
C
certificate
accepting 5-1
installing 5-2
trusting 5-1
CLI
configuring GSS 4-2
default CLI username and password 3-2
direct serial connection 3-1
initial setup quick start 4-2
private and public key pair 3-6
privileged EXEC mode, enabling 3-2, 4-4
remote connection 3-5
saving session 3-2
clock
displaying 4-10
setting 4-5
synchronizing with NTP server 4-9
D
date
displaying 4-10
setting 4-5
daylight savings time
setting to an alternate pre-defined summer time 4-7
default
password 5-2
username 5-2
domain name, resolving to IP address 4-20
duplex, configuring for interface 4-13, 4-14
E
enable command password, configuring 3-5
Ethernet interface
autosense, configuring 4-12
CLI command summary 4-11
duplex, configuring 4-13
hardware interface status, displaying 4-16
IP address and subnet mask, configuring 4-15
keepalive communication, configuring 4-15
shutting down 4-16
speed, configuring 4-14
TCP traffic, dumping 4-17
F
FTP
disabling 3-4
enabling 3-4
IP address or host name, specifying 3-4
operating status, viewing 3-4
G
global server load balancing, summary 7-1
Global Site Selector
accessing the CLI with private/public key pair 3-6
alternate daylight savings time, setting 4-7
configured as primary GSSM 4-21
configured as standby GSSM 4-22
configuring 4-23
configuring from CLI 4-2
date and time, setting 4-5
direct serial connection 3-1
enable remote connect 3-2, 3-5, 3-6
hardware clock, setting 4-9
host name, configuring 4-10
initial configuration with setup script 2-1
initial setup 2-1
network deployment 2-2
remote connection 3-5
setup configuration decisions 2-2
setup script, configuring with 2-1
timezone, setting 4-5
user-defined daylight savings time, setting 4-6
user-defined time zone, setting 4-6
Global Site Selector Manager
alternate daylight savings time, setting 4-7
date and time, setting 4-5
default username and password 5-2
global server load balancing, summary 7-1
hardware clock, setting 4-9
host name, configuring 4-10
initial configuration with setup script 2-1
initial setup 2-1
logging on 5-1
primary GSSM, configuring 4-21
registering GSS devices 5-3, 6-1
setup configuration decisions 2-2
standby GSSM, configuring 4-22
timezone, setting 4-5
URL, secure HTTP 5-1
user-defined daylight savings time, setting 4-6
user-defined time zone, setting 4-6
GSLB configuration tasks
CLI-based 1-3
GUI-based 1-3
GSS network
configuration overview 4-2
GSS role 4-23
primary GSSM role 4-21
setup configuration decisions 2-1, 4-2
standby GSSM role 4-22
URL 5-1
GUI
default username and password 5-2
logging on 5-1
logging out 5-3
H
hardware clock
setting 4-9
hardware interface status, displaying 4-16
host name
configuring for GSS 4-10
resolving to IP address 4-20
HyperTerminal
launching 3-1
saving session 3-2
I
initial GSS configuration quick start 4-2
IP default gateway
configuring 4-19
deleting 4-19
IP route
configuring 4-19
deleting 4-19
displaying 4-19
routing table, displaying 4-19
static route, configuring 4-19
K
keepalive communication, configuring 4-15
L
log in
certificate 5-1
default CLI username and password 3-2
default GUI username and password 5-2
logging out 5-3
primary GSSM GUI 5-1
log out 5-3
N
name server, specifying 4-18
network management
tasks using CLI versus GUI 1-1
NTP
enabling 4-9
global sticky mesh requirements 4-9
synchronizing GSS system clock with NTP server 4-9
P
password
CLI, entering 3-2
default (CLI) 3-2
default (GUI) 5-2
GUI, entering 5-2
private and public key pairs 3-6
privileged EXEC mode, enabling 3-2, 4-4
Q
quick start, initial GSS configuration 4-2
R
registering
GSS with primary GSSM 4-23
standby GSSM with primary GSSM 4-22
registering GSS devices 5-3, 6-1
remote access
enabling 3-3
FTP 3-4
operating status, viewing 3-4
SSH 3-3
Telnet 3-3
remote connection
accessing CLI 3-5
SSH 3-5
Telnet 3-5
S
secure HTTP address 5-1
setup script
applying 2-3
configuring GSS 2-1
configuring GSSM 2-1
shutting down, Ethernet interface 4-16
SSH
disabling 3-3
enabling 3-3
operating status, viewing 3-4
using private and public key pairs 3-6
v1 protocol, enabling 3-3
v2 and v1 protocols 3-3
static IP routing 4-19
T
TCP traffic, dumping 4-17
Telnet
disabling 3-3
enabling 3-3
IP address, specifying 3-3
operating status, viewing 3-4
session port number, changing 3-3
time
displaying 4-10
setting 4-5
timezone
displaying 4-10
setting 4-5
U
user-defined daylight savings time
setting 4-6
user-defined time zone
setting 4-6
username
CLI, entering 3-2
default (CLI) 3-2
default (GUI) 5-2