Table Of Contents

A - B - C - D - E - F - H - I - L - M - P - Q - R - S - T - U - V -

Index

A

ACLs

bridge-group VLAN, assigning to 4-6

VLAN interface, assigning to 2-16

addresses

bank of MAC, configuring for shared VLANs 2-5

IP, range for subnets A-6

MAC, learning for ARP 5-6

source MAC validation 5-6

alias IP address

assigning to a BVI 4-9

assigning to a VLAN 2-12

alternate address, ICMP message A-12

ARP

configuring 5-1

entry replication, disabling 5-8

inspection, displaying ARP configuration 5-14

inspection, enabling 5-3

inspection, enabling ARP 5-3

inspection configuration, displaying 5-14

IP address-to-MAC address mapping, displaying 5-10

learned entries, clearing 5-16

learned interval, configuring 5-7

MAC address learning 5-6

rate limiting gratuitous ARP packets 5-9

request interval, configuring 5-5

retry attempts, configuring 5-4

retry interval, configuring 5-5

static entry, adding 5-2

statistics, clearing 5-16

statistics, displaying 5-11

time interval between sync messages, specifying 5-8

timeout values, displaying 5-15

B

bits subnet masks A-4

bridge-group virtual interface 4-2

ACL, assigning 4-6

alias IP address, assigning 4-9

bridge group, assigning 4-5

configuring 4-8

creating 4-8

description 4-11

displaying information on 4-12

enabling 4-12

interface, enabling 4-7

IP address, assigning 4-9

peer IP address, assigning 4-10

bridging 4-1

bridge group, displaying information 4-12

bridge-group virtual interface, configuring 4-8

bridge group VLAN, configuring 4-5

configuration example 4-13

quick start 4-3

C

Class A, B, and C addresses A-2

classes of IP addresses A-2

clearing

Ethernet interface configuration, status, and statistics 1-38

configuration

bridging example 4-13

connectivity, verifying 3-4

context

VLAN, assigning 2-4

conversion error, ICMP message A-12

D

default route 3-3

configuring 3-3

removing 3-4

DHCP relay

agent, configuring 6-4

agent, enabling 6-4

configuration, displaying 6-7

configuring 6-1

information reforwarding policy, configuring 6-6

overview 6-2

quick start 6-3

server IP address, configuring 6-5

statistics, displaying 6-7

disabling entry replication for ARP 5-8

displaying Ethernet interface configuration, status, and statistics 1-32

dotted decimal subnet masks A-4

E

echo, ICMP message A-12

echo reply, ICMP message A-12

enabling traffic flow

on bridge-group VLAN interface 4-7

on BVI 4-12

on VLAN interface 2-9

EtherChannels

configuring for use with Catalyst 6500 series switch 1-18, 1-23

descriptive name, adding 1-20

enabling/disabling 1-23

load balancing, configuring 1-22

overview 1-18

port-channel interface, configuring 1-20

Ethernet port

802.1Q native VLAN for a trunk, specifying 1-31

allocating to a VLAN trunk 1-29

carrier delay, specifying 1-14

configuring 1-8

configuring for use with Catalyst 6500 series switch 1-14, 1-33

enabling/disabling 1-17

EtherChannel load balancing 1-22

EtherChannels, configuring for use with Catalyst 6500 series switch 1-18, 1-23

EtherChannels, specifying 1-18

FT VLAN, specifying 1-13, 1-21

port-channel group, specifying 1-15

port-channel interface, configuring 1-20

port-channel interface, enabling/disabling 1-23

QoS, specifying 1-16

quick start 1-3, 1-5

speed and duplex 1-10

VLAN access port, configuring 1-25

VLAN trunks, configuring 1-27

VLAN trunks, enabling/disabling 1-30

example

bridging configuration 4-13

F

FIB (forward information base), displaying 3-13

forward information base (FIB), displaying 3-13

FT VLAN ethernet port, specifying 1-13, 1-21

H

hosts, subnet masks for A-4

I

ICMP

type numbers A-12

information reforwarding policy, for DHCP 6-6

information reply, ICMP message A-12

information request, ICMP message A-12

interfaces

802.1Q native VLAN for a trunk, specifying 1-31

configuring for use with Catalyst 6500 series switch 1-14, 1-33

descriptive name, adding 1-9, 1-20

EtherChannel load balancing 1-22

EtherChannels, configuring for use with Catalyst 6500 series switch 1-18, 1-23

EtherChannels, specifying 1-18

ethernet port, configuring 1-8

ethernet port , enabling/disabling 1-17

ethernet port carrier delay, specifying 1-14

ethernet port speed and duplex, configuring 1-10

FT VLAN ethernet port , specifying 1-13, 1-21

naming 1-9, 1-20

port-channel group, specifying 1-15

port-channel interface, configuring 1-20

port-channel interface, enabling/disabling 1-23

QoS, specifying 1-16

VLAN access port, configuring 1-25

VLAN trunks, configuring 1-27

VLAN trunks, enabling/disabling 1-30

IP address

alias (BVI) 4-9

assigning to BVI 4-9

assigning to VLAN interface 2-8, 3-2

classes A-2

peer (BVI) 4-10

peer IP, assigning to VLAN interface 2-11

private A-2

secondary 2-8, 3-2

subnet mask A-6

IP address-to-MAC address mapping, displaying 5-10

IP routes, displaying 3-7

L

learned entries, clearing ARP table 5-16

learned interval, for ARP 5-7

M

MAC addresses

assigning a bank for shared VLANs 2-5

learning for ARP 5-6

source validation, enabling 5-6

mac-sticky feature, enabling on VLAN interface 2-13

mask reply, ICMP message A-12

mask request, ICMP message A-12

mobile redirect, ICMP message A-12

MTU

setting for VLAN interface 2-10

P

parameter problem, ICMP message A-12

peer IP address

assigning to an interface 2-11

assigning to BVI 4-10

policy map

assigning to VLAN interface 2-15

port

Ethernet port number 1-8

private networks, IP addresses A-2

protocol numbers and literal values A-7

Q

QoS, enabling for an Ethernet port 1-16

QoS, specifying 1-16

quick start

bridge mode configuration 4-3

DHCP relay 6-3

ethernet port configuration 1-3, 1-5

VLAN interface 2-2

R

rate limiting

gratuitous ARP packets 5-9

redirect, ICMP message A-12

request interval, for ARP 5-5

retry

attempts, for ARP 5-4

interval, for ARP 5-5

router advertisement, ICMP message A-12

router solicitation, ICMP message A-12

routing

default route, configuring 3-3

default route, removing 3-4

IP addresses, assigning to interfaces 3-2

IP routes, displaying 3-7

verifying connectivity 3-4

S

secondary IP address 2-8, 3-2

service policy

assigning a policy map 2-15

shared VLAN

allocating 2-4

IP address 2-8

MAC addresses, assigning a bank of 2-5

show interfaces command 1-20, 1-32

slot number 1-8

source MAC validation, enabling 5-6

source quench, ICMP message A-12

specifying an ARP sync message time interval 5-8

static ARP entry 5-2

static route

configuring 3-3

removing 3-4

statistics

ARP, clearing 5-16

ARP, displaying 5-11

DHCP relay 6-7

VLAN, clearing 1-38, 2-22

subnet masks

/bits A-4

address range A-6

class B size A-5

class C size A-5

dotted decimal A-4

number of hosts A-4

overview A-3

T

TCP

ports and literal values A-7

time exceeded, ICMP message A-12

timeout values, displaying ARP 5-15

timestamp-reply, ICMP message A-12

timestamp-request, ICMP message A-12

trace routes

from the ACE 3-6

on ACE-configured IP addresses 3-7

U

UDP

ports and literal values A-7

unreachable, ICMP message A-12

V

virtual routed interface, creating for bridge group 4-8

VLANs

access list, applying 2-16

access port, configuring 1-25

alias IP address, setting 2-12

configuring on ACE 2-6

context, assigning 2-4

description, defining 2-14

interface manager tables, displaying 2-21

IP addresses, assigning 2-8

mack-sticky, enabling 2-13

MTU, setting 2-10

peer IP addresses, setting 2-11

policy map, assigning 2-15

quick start 2-2

statistics, clearing 1-38, 2-22

statistics, displaying 2-18

summary statistics, displaying 2-20

traffic flow, enabling and disabling 2-9

VLAN trunks

802.1Q native VLAN, specifying 1-31

allocating an Ethernet port 1-29

enabling/disabling 1-30

guidelines 1-27

overview 1-27