Feedback
Table Of Contents
A - B - C - D - E - F - H - I - L - M - P - Q - R - S - T - U - V -
Index
A
ACLs
bridge-group VLAN, assigning to 4-6
VLAN interface, assigning to 2-13
address range, subnets A-6
alias IP address
assigning to a VLAN 2-9
assigning to BVI 4-9
alternate address, ICMP message A-12
ARP
configuring 5-1
entry replication, disabling 5-7
inspection, enabling 5-2
inspection, enabling ARP 5-2
inspection configuration, displaying 5-12
IP address-to-MAC address mapping, displaying 5-9
learned entries, clearing 5-13
learned interval, configuring 5-6
MAC address learning 5-6
request interval, configuring 5-5
retry attempts, configuring 5-4
retry interval, configuring 5-5
static entry, adding 5-2
statistics, clearing 5-13
statistics, displaying 5-10
time interval between sync messages, specifying 5-7
timeout values, displaying 5-12
B
bits subnet masks A-4
bridge-group virtual interface 4-2
ACL, assigning 4-6
alias IP address, assigning 4-9
bridge group, assigning 4-5
configuring 4-8
creating 4-8
description 4-10
displaying information on 4-11
enabling 4-11
interface, enabling 4-7
IP address, assigning 4-9
peer IP address, assigning 4-10
bridging 4-1
bridge group, displaying information 4-11
bridge-group virtual interface, configuring 4-8
bridge group VLAN, configuring 4-5
quick start 4-3
C
CIDR bit count subnet mask A-4
Class A, B, and C addresses A-2
classes of IP addresses A-2
clearing
Ethernet interface configuration, status, and statistics 1-32
connectivity, verifying 3-4
context
VLAN, assigning 2-15
conversion error, ICMP message A-12
D
default route 3-3
configuring 3-3
removing 3-4
DHCP relay
agent, configuring 6-4
agent, enabling 6-4
configuration, displaying 6-7
configuring 6-1
information reforwarding policy, configuring 6-6
overview 6-2
quick start 6-3
server IP address, configuring 6-5
statistics, displaying 6-7
disabling entry replication for ARP 5-7
displaying Ethernet interface configuration, status, and statistics 1-27
dotted decimal subnet masks A-4
E
echo, ICMP message A-12
echo reply, ICMP message A-12
enabling traffic flow
on bridge-group VLAN interface 4-7
on BVI 4-11
on VLAN interface 2-7
EtherChannels
descriptive name, adding 1-17
enabling/disabling 1-20
load balancing, configuring 1-19
overview 1-15
port-channel interface, configuring 1-17
Ethernet port
802.1Q native VLAN for a trunk, specifying 1-26
allocating to a VLAN trunk 1-24
configuring 1-7
enabling/disabling 1-14
EtherChannel load balancing 1-19
EtherChannels, specifying 1-15
FT VLAN, specifying 1-12, 1-18
port-channel group, specifying 1-13
port-channel interface, configuring 1-17
port-channel interface, enabling/disabling 1-20
speed and duplex 1-9
VLAN access port, configuring 1-21
VLAN trunks, configuring 1-22
VLAN trunks, enabling/disabling 1-25
F
FIB (forward information base), displaying 3-13
forward information base (FIB), displaying 3-13
FT VLAN ethernet port, specifying 1-12, 1-18
H
hosts, subnet masks for A-4
I
ICMP
type numbers A-12
information reforwarding policy, for DHCP 6-6
information reply, ICMP message A-12
information request, ICMP message A-12
interfaces
802.1Q native VLAN for a trunk, specifying 1-26
descriptive name, adding 1-8, 1-17
EtherChannel load balancing 1-19
EtherChannels, specifying 1-15
ethernet port, configuring 1-7
ethernet port , enabling/disabling 1-14
ethernet port speed and duplex, configuring 1-9
FT VLAN ethernet port , specifying 1-12, 1-18
port-channel group, specifying 1-13
port-channel interface, configuring 1-17
port-channel interface, enabling/disabling 1-20
VLAN access port, configuring 1-21
VLAN trunks, configuring 1-22
VLAN trunks, enabling/disabling 1-25
IP address
assigning to VLAN interface 2-6, 3-2
classes A-2
IP address-to-MAC address mapping, displaying 5-9
peer IP, assigning to VLAN interface 2-8
private A-2
subnet mask A-6
IP routes, displaying 3-8
L
learned entries, clearing ARP table 5-13
learned interval, for ARP 5-6
M
MAC
addresses, assigning bank for shared VLANs 2-16
MAC addresses
learning for ARP 5-6
mac-sticky feature, enabling on VLAN interface 2-10
mask reply, ICMP message A-12
mask request, ICMP message A-12
mobile redirect, ICMP message A-12
MTU
setting for VLAN interface 2-8
P
parameter problem, ICMP message A-12
peer
IP address, assigning to BVI 4-10
policy map
VLAN interface, assigning to 2-11
port
Ethernet port number 1-7
private networks, IP addresses A-2
protocol numbers and literal values A-6
Q
quick start
bridge mode configuration 4-3
DHCP relay 6-3
ethernet port configuration 1-3, 1-5
VLAN interface 2-2
R
redirect, ICMP message A-12
request interval, for ARP 5-5
retry
attempts, for ARP 5-4
interval, for ARP 5-5
router advertisement, ICMP message A-12
router solicitation, ICMP message A-12
routing
default route, configuring 3-3
default route, removing 3-4
IP addresses, assigning to interfaces 3-2
IP routes, displaying 3-8
verifying connectivity 3-4
S
shared VLAN
allocating 2-15
IP address 2-6
MAC addresses, assigning bank of 2-16
show interfaces command 1-17, 1-27
slot number 1-7
source quench, ICMP message A-12
specifying an ARP sync message time interval 5-7
static ARP entry 5-2
static route
configuring 3-3
removing 3-4
statistics
ARP, clearing 5-13
ARP, displaying 5-10
DHCP relay 6-7
subnet masks
/bits A-4
address range A-6
class B size A-5
class C size A-5
dotted decimal A-4
number of hosts A-4
overview A-3
T
TCP ports and literal values A-6
time exceeded, ICMP message A-12
timeout values, displaying ARP 5-12
timestamp-reply, ICMP message A-12
timestamp-request, ICMP message A-12
trace routes
from the ACE 3-6
on ACE-configured IP addresses 3-7
U
UDP
ports and literal values A-6
unreachable, ICMP message A-12
V
virtual routed interface, creating for bridge group 4-8
VLANs
access list, applying 2-13
access port, configuring 1-21
configuring on ACE 2-4
context, assigning 2-15
description, defining 2-11
interface manager tables, displaying 2-20
IP addresses, assigning 2-6
mack-sticky, enabling 2-10
MTU, setting 2-8
peer IP addresses, setting 2-8
policy map, assigning 2-11
quick start 2-2
statistics, clearing 1-32, 2-21
statistics, displaying 2-17, 2-19
traffic flow, enabling and disabling 2-7
VLAN trunks
802.1Q native VLAN, specifying 1-26
allocating an Ethernet port 1-24
enabling/disabling 1-25
guidelines 1-22
overview 1-22