Table Of Contents

Action List Optimization Configuration Mode Commands

(config-actlist-optm) appscope

(config-actlist-optm) cache

(config-actlist-optm) delta

(config-actlist-optm) dynamic etag

(config-actlist-optm) flashforward

(config-actlist-optm) flashforward-object

Action List Optimization Configuration Mode Commands

The action list optimization mode allows you to configure a series of application acceleration and optimization statements. An action list groups a series of individual application acceleration and optimization functions that apply to a specific type of operation. After you enter this command, the system enters the corresponding action list configuration mode.

To access the action list optimization mode, enter the action-list type optimization http command. The CLI prompt changes to (config-actlist-optm). To remove an action list optimization selection, use the no form of the command. For details about using the commands in the action list optimization mode, see the Cisco 4700 Series Application Control Engine Appliance Application Acceleration and Optimization Configuration Guide.

action-list type optimization http list_name

no action-list type optimization http list_name

Syntax Description

list_name

Name assigned to the action list. Enter a unique name as an unquoted text string with a maximum of 64 alphanumeric characters.

Command Modes

Configuration mode

Admin and user contexts

Command History

Release	Modification
A1(7)	This command was introduced.

Usage Guidelines

The commands in this mode require the loadbalance feature in your user role. For details about role-based access control (RBAC) and user roles, see the Cisco 4700 Series Application Control Engine Appliance Virtualization Configuration Guide.

The action-list type command allows you to configure a series of statements. An action list groups a series of individual functions that apply to a specific type of application acceleration and optimization operation. After you enter this command, the system enters the corresponding action list configuration mode.

After you configure the action list, you associate it with a specific statement in a Layer 7 HTTP optimization policy map. The Layer 7 optimization HTTP policy map activates an optimization HTTP action list that allows you to configure the specified optimization actions.

Examples

To create an optimization HTTP action list, enter:

host1/Admin(config)# action-list type optimization http ACT_LIST1

host1/Admin(config-actlist-optm)#

To remove the action list from the configuration, enter:

host1/Admin(config)# no action-list type optimization http ACT_LIST1

Related Commands

show action-list

show running-config

(config) parameter-map type

(config) policy-map

(config-actlist-optm) appscope

To enable AppScope performance monitoring by the optional Cisco AVS 3180A Management Station for use with the ACE, use the appscope command. Use the no form of this command to disable the AppScope function from the action list.

appscope

no appscope

Syntax Description

This command has no keywords or arguments.

Command Modes

Action list optimization mode

Admin and user contexts

Command History

Release	Modification
A1(7)	This command was introduced.

Usage Guidelines

The statistical log contains an entry for each ACE optimization request to the server and is used for statistical analysis by the optional Cisco AVS 3180A Management Station. The ACE collects statistical log and sends it to the Cisco AVS 3180A Management Station for loading into the database. For details about the use of the Cisco AVS 3180A Management Station for database, management, and reporting features for the ACE optimization functionality, including AppScope reporting, see the Cisco 4700 Series Application Control Engine Appliance Application Acceleration and Optimization Configuration Guide.

To control the AppScope features that measure application acceleration and optimization performance, use the appscope commands in parameter map optimization configuration mode. See the "Parameter Map Optimization Configuration Mode Commands" section for details.

To specify the host (the syslog server on the Management Station) that receives the syslog messages sent by the ACE, use the logging host configuration command. See the (config) logging host command. This command allows you to identify the IP address of the Management Station that will be used as the syslog server. You can specify that the host uses either UDP or TCP to send messages to the syslog server.

Examples

For example, enter:

host1/Admin(config)# action-list type optimization http ACT_LIST1

host1/Admin(config-actlist-optm)# appscope

To disable the AppScope function from the action list, enter:

host1/Admin(config-actlist-optm)# no appscope

Related Commands

(config) logging host
(config-parammap-optmz) appscope optimize-rate-percent
(config-parammap-optmz) parameter-summary parameter-value-limit
(config-parammap-optmz) request-grouping-string

(config-actlist-optm) cache

To enable cache optimization for the corresponding URLs, use the cache command. Use the no form of this command to disable the cache function from the action list.

cache {dynamic | forward}

no cache {dynamic | forward}

Syntax Description

dynamic

Enables Adaptive Dynamic Caching for the corresponding URLs, even if the expiration settings in the response indicate that the content is dynamic. The expiration of cache objects is controlled by the cache expiration settings based on the time or server load (performance assurance).

forward

Enables the cache forward feature for the corresponding URLs. This keyword allows the ACE to serve the object from its cache (static or dynamic) even when the object has expired if the maximum cache TTL time period has not yet expired (set using the cache ttl command in parameter map optimization mode). At the same time, the ACE sends an asynchronous request to the origin server to refresh its cache of the object.

Command Modes

Action list optimization mode

Admin and user contexts

Command History

Release	Modification
A1(7)	This command was introduced.

Usage Guidelines

You define the ACE cache object key, cache freshness, and cache request/response policy settings by configuring the cache and cache-policy commands in parameter map optimization configuration mode. See "Parameter Map Optimization Configuration Mode Commands" section for details.

Examples

For example, to enable the cache forward feature for the corresponding URLs, enter:

host1/Admin(config)# action-list type optimization http ACT_LIST1

host1/Admin(config-actlist-optm)# cache forward

To disable the cache function from the action list, enter:

host1/Admin(config-actlist-optm)# no cache forward

Related Commands

(config-parammap-optmz) cache key-modifier
(config-parammap-optmz) cache parameter
(config-parammap-optmz) cache ttl
(config-parammap-optmz) cache-policy request
(config-parammap-optmz) cache-policy response

(config-actlist-optm) delta

To enable delta optimization to condense corresponding URLs, use the delta command. Use the no form of this command to disable delta optimization from the action list.

delta

no delta

Syntax Description

This command has no keywords or arguments.

Command Modes

Action list optimization mode

Admin and user contexts

Command History

Release	Modification
A1(7)	This command was introduced.

Usage Guidelines

This command has no usage guidelines.

Examples

For example, enter:

host1/Admin(config)# action-list type optimization http ACT_LIST1

host1/Admin(config-actlist-optm)# delta

To disable delta optimization from the action list, enter:

host1/Admin(config-actlist-optm)# no delta

Related Commands

(config-parammap-optmz) delta

(config-actlist-optm) dynamic etag

To enable just-in-time object acceleration for the corresponding URLs, use the dynamic etag command. Use the no form of this command to disable just-in-time object acceleration from the action list.

dynamic etag

no dynamic etag

Syntax Description

This command has no keywords or arguments.

Command Modes

Action list optimization mode

Admin and user contexts

Command History

Release	Modification
A1(7)	This command was introduced.

Usage Guidelines

This command has no usage guidelines.

Examples

For example, enter:

host1/Admin(config)# action-list type optimization http ACT_LIST1

host1/Admin(config-actlist-optm)# dynamic etag

To disable just-in-time object acceleration from the action list, enter:

host1/Admin(config-actlist-optm)# no dynamic etag

Related Commands

This command has no related commands.

(config-actlist-optm) flashforward

To enable FlashForward for the corresponding URLs and to transform embedded objects, use the flashforward command. Use the no form of this command to disable FlashForward from the action list.

flashforward

no flashforward

Syntax Description

This command has no keywords or arguments.

Command Modes

Action list optimization mode

Admin and user contexts

Command History

Release	Modification
A1(7)	This command was introduced.

Usage Guidelines

This command has no usage guidelines.

Examples

For example, enter:

host1/Admin(config)# action-list type optimization http ACT_LIST1

host1/Admin(config-actlist-optm)# flashforward

To disable FlashForward from the action list, enter:

host1/Admin(config-actlist-optm)# no flashforward

Related Commands

(config-actlist-optm) flashforward-object
(config-parammap-optmz) flashforward refresh-policy
(config-parammap-optmz) rebase

(config-actlist-optm) flashforward-object

To enable FlashForward static caching for the corresponding URLs, use the flashforward-object command. Use the no form of this command to disable FlashForward static caching from the action list.

flashforward-object

no flashforward-object

Syntax Description

This command has no keywords or arguments.

Command Modes

Action list optimization mode

Admin and user contexts

Command History

Release	Modification
A1(7)	This command was introduced.

Usage Guidelines

This command has no usage guidelines.

Examples

For example, enter:

host1/Admin(config)# action-list type optimization http ACT_LIST1

host1/Admin(config-actlist-optm)# flashforward-object

To disable FlashForward static caching from the action list, enter:

host1/Admin(config-actlist-optm)# no flashforward-object

Related Commands

(config-actlist-optm) flashforward
(config-parammap-optmz) flashforward refresh-policy
(config-parammap-optmz) rebase