Table Of Contents

Specifications

Electrical Specifications

Environmental Specifications

Physical Specifications

Port Specifications

Specifications

---

This appendix contains the following sections that list the specifications for the Cisco 4710 Application Control Engine (ACE) appliance:

•Electrical Specifications

•Environmental Specifications

•Physical Specifications

•Port Specifications

Electrical Specifications

Table A-1 describes the ACE AC electrical specifications.

Table A-1 AC Electrical Specifications

AC Specification	Operational
Input Voltage (V)	100 to 240 VAC
Input Voltage (F)	50 to 60 Hz
Current Draw	3.5 A
Typical Operating Power	128 W
Power Consumption (Max. Power)	345 W
Heat Dissipation	1314 BTU/hr

Environmental Specifications

Table A-2 describes the ACE environmental specifications.

Table A-2 Environmental Specifications 

Specification	Operational	Non-operational
Temperature	32°F to 104°F (0° to 40°C)	-4°F to 140°F (-20° to 60°C)
Humidity	90% at 104°F (40°C) (noncondensing)	90% at 140°F (60°C) (noncondensing)
Shock	31 G halfsine	71 G halfsine, 20 G square
Vibration	0.25 G from 3 to 200 Hz	0.5 G from 3 to 200 Hz
Acoustic Noise	50 dBa (maximum)	Not applicable

---

Note G is the unit of acceleration due to gravity, where 1 G equals 32.17 feet per second² (9.81 meters per second²).

---

Physical Specifications

Table A-3 describes the ACE physical specifications.

Table A-3 Physical Specifications

Description	Specification
Chassis Dimensions (H x W x D)	1.50 in x 16.92 in x 20.04 in (42.4 mm x 430 mm x 509 mm)
Chassis Shipping Weight	40.0 lbs (18.2 kg)
Chassis Weight	30.8 lbs (14 kg)

Port Specifications

Table A-4 describes the ACE port specifications.

Table A-4 Port Specifications

Description	Specification
Ports	•Four 1000BASE-T, 100BASE-T, 10BASE-T Ethernet ports (RJ-45 connector) •One console serial port (9-pin male D-shell connector)