Ejemplo de Configuración de CUSP

Opciones de descarga

  • PDF     (3.8 MB)
    Visualice con Adobe Reader en una variedad de dispositivos
  • ePub     (3.5 MB)
    Visualice en diferentes aplicaciones en iPhone, iPad, Android, Sony Reader o Windows Phone
  • Mobi (Kindle)     (1.4 MB)
    Visualice en dispositivo Kindle o aplicación Kindle en múltiples dispositivos
Actualizado:6 de agosto de 2013
ID del documento:116252

Lenguaje no discriminatorio

El conjunto de documentos para este producto aspira al uso de un lenguaje no discriminatorio. A los fines de esta documentación, "no discriminatorio" se refiere al lenguaje que no implica discriminación por motivos de edad, discapacidad, género, identidad de raza, identidad étnica, orientación sexual, nivel socioeconómico e interseccionalidad. Puede haber excepciones en la documentación debido al lenguaje que se encuentra ya en las interfaces de usuario del software del producto, el lenguaje utilizado en función de la documentación de la RFP o el lenguaje utilizado por un producto de terceros al que se hace referencia. Obtenga más información sobre cómo Cisco utiliza el lenguaje inclusivo.

Acerca de esta traducción

Cisco ha traducido este documento combinando la traducción automática y los recursos humanos a fin de ofrecer a nuestros usuarios en todo el mundo contenido en su propio idioma. Tenga en cuenta que incluso la mejor traducción automática podría no ser tan precisa como la proporcionada por un traductor profesional. Cisco Systems, Inc. no asume ninguna responsabilidad por la precisión de estas traducciones y recomienda remitirse siempre al documento original escrito en inglés (insertar vínculo URL).

Introducción

Este documento describe la muestra CLI y la Configuración del GUI de Cisco unificó el proxy del SORBO (CAMBIO DE SIGNO) con las depuraciones que hacen juego cuatro diversos decorados de la encaminamiento de la llamada.

Prerrequisitos

Requisitos

Cisco recomienda que usted tiene conocimiento básico de estos temas:

  • Session Initiation Protocol (SIP)
  • Cisco unificó el proxy del SORBO (el CAMBIO DE SIGNO)

Componentes Utilizados

La información en este documento se basa en el CAMBIO DE SIGNO.

La información que contiene este documento se creó a partir de los dispositivos en un ambiente de laboratorio específico. Todos los dispositivos que se utilizan en este documento se pusieron en funcionamiento con una configuración verificada (predeterminada). Si la red está funcionando, asegúrese de haber comprendido el impacto que puede tener cualquier comando.

Configurar

Esta sección describe la configuración de cuatro decorados de la encaminamiento de la llamada.

Note: Use la Command Lookup Tool (clientes registrados solamente) para obtener más información sobre los comandos usados en esta sección.

Escenario 1

Flujo de la llamada: Teléfono 1 IP -- CME -- SORBO -- CAMBIO DE SIGNO -- SORBO -- CUCM -- Teléfono 2 IP

Marque 408 202 2102 del teléfono 1 IP registrado a CallManager expreso (CME) para alcanzar el teléfono 2 IP registrado a las Comunicaciones unificadas de Cisco el encargado (CUCM) vía el CAMBIO DE SIGNO.

El CME actúa como red telefónica conmutada pública (PSTN) en este decorado.

  1. El SORBO INVITA viene al CAMBIO DE SIGNO del CME.
    [DsTransportListener-2] DEBUG 2013.02.27 19:15:59:245 DsSipLlApi.Wire - 
    Received UDP packet on 14.128.100.169:5060 ,source 14.128.100.150:57878
    INVITE sip:4082022102@14.128.100.169:5060 SIP/2.0
    Via: SIP/2.0/UDP 14.128.100.150:5060;branch=z9hG4bK21F2555
    Remote-Party-ID: "4082025555" <sip:4082025555@14.128.100.150>;
    party=calling;screen=yes;privacy=off
    From: "4082025555" <sip:4082025555@14.128.100.150>;tag=81D7430C-1D2
    To: <sip:4082022102@14.128.100.169>
    Date: Wed, 27 Feb 2013 19:15:59 GMT
    Call-ID: F3E5F396-804811E2-9818EC62-1B7185EE@14.128.100.150
    Supported: 100rel,timer,resource-priority,replaces,sdp-anat
    Min-SE:  1800
    Cisco-Guid: 4091813662-2152206818-2551376994-0460424686
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER,
    SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 101 INVITE
    Timestamp: 1361992559
    Contact: <sip:4082025555@14.128.100.150:5060>
    Expires: 180
    Allow-Events: telephone-event
    Max-Forwards: 69
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 410

    v=0
    o=CiscoSystemsSIP-GW-UserAgent 1007 629 IN IP4 14.128.100.150
    s=SIP Call
    c=IN IP4 14.128.100.150
    t=0 0
    m=audio 16930 RTP/AVP 18 101
    c=IN IP4 14.128.100.150
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    m=video 17954 RTP/AVP 97
    c=IN IP4 14.128.100.150
    b=TIAS:1000000
    a=rtpmap:97 H264/90000
    a=fmtp:97 profile-level-id=42801E;packetization-mode=0

    --- end of packet ---
  2. La llamada se valida a la configuración de la red (Red-PSTN) que hace juego.

    CLI
    sip listen Net-PSTN udp 14.128.100.169 5060

     !
    sip network Net-PSTN standard
      no non-invite-provisional
     allow-connections
     retransmit-count invite-client-transaction 3
      retransmit-count invite-server-transaction 5
     retransmit-count non-invite-client-transaction 3
      retransmit-timer T1 500
      retransmit-timer T2 4000
      retransmit-timer T4 5000
      retransmit-timer TU1 5000
      retransmit-timer TU2 32000
      retransmit-timer clientTn 64000
      retransmit-timer serverTn 64000
      tcp connection-setup-timeout 1000
      udp max-datagram-size 1500
      end network
    !

    GUI


    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 
    conditions.RegexCondition - inNetwork='Net-PSTN'
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 
    conditions.RegexCondition - IN_NETWORK: Net-PSTN
  3. Se ejecuta la secuencia de la Pre-normalización.

    CLI
    trigger pre-normalization sequence 1 policy CUCM-Prefix-408
    condition TC-from-CUCM
    GUI


    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 util.Normalization - 
    Entering Normalization(moduleRequest:pre-normalize)
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 conditions.RegexCondition - 
    inNetwork='Net-PSTN'
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 conditions.RegexCondition - 
    IN_NETWORK: Net-PSTN
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 conditions.AbstractRegexCondition -
    pattern(^\QNet-CUCM\E$), toMatch(Net-PSTN) returning false
    [REQUESTI.12] INFO  2013.02.27 19:15:59:250 util.Normalization - 
    skipping pre-normalize, due to either no trigger is configured or triggers 
    did not evaluate to true or is configured to by-pass
  4. Se corresponde con la condición del activador (TC-de-PSTN).

    CLI
    !
    trigger condition TC-from-PSTN
     sequence 1 
      in-network ^\QNet-PSTN\E$
      end sequence
     end trigger condition
    !

    GUI


    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 conditions.RegexCondition - 
    inNetwork='Net-PSTN'
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 conditions.RegexCondition - 
    IN_NETWORK: Net-PSTN
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:250 conditions.AbstractRegexCondition -
    pattern(^\QNet-PSTN\E$), toMatch(Net-PSTN) returning true
  5. La configuración del activador de la encaminamiento se controla para encontrar la directiva de la ruta (Directiva-a-CUCM) esa las coincidencias basadas en la condición del activador (TC-de-PSTN).

    CLI
    trigger routing sequence 1 policy Policy-to-CUCM condition TC-from-PSTN

    GUI


    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 triggers.ModuleTrigger - 
    ModuleTrigger.eval() action<Policy-to-CUCM> actionParameter<>
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 triggers.ModuleTrigger - 
    ModuleTrigger.eval() got the policy, executing it ...
  6. La configuración de la directiva de la ruta (Directiva-a-CUCM) se controla para encontrar la tabla de la ruta (RT-CUCM) esa las coincidencias.

    CLI
    !
    policy lookup Policy-to-CUCM
     sequence 100 RT-CUCM request-uri uri-component user
      modify-key 4082022102 1111
      rule exact
      end sequence
     end policy
    !

    GUI



    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.XCLPrefix - 
    Entering getKeyValue()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.FieldSelector - 
    getUriPart: URI - sip:4082022102@14.128.100.169:5060 part 6
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.FieldSelector - 
    Requested field 45
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.FieldSelector -
     Returning key 4082022102
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.FieldSelector -
     Retrieved Modifier  RegexModifier: match= 4082022102, replace= 
    1111, ignore case= false
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.FieldSelector - 
    Input field: 4082022102
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:251 nrs.FieldSelector -
     Modified field: 1111
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 nrs.XCLPrefix - 
    Leaving getKeyValue()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 modules.XCLLookup -
     table=RT-CUCM, key=1111
    [REQUESTI.12] INFO  2013.02.27 19:15:59:252 modules.XCLLookup -
     table is RT-CUCM
  7. La configuración de la tabla de la ruta (RT-CUCM) se controla para encontrar el destino de la blanco (SG-CUCM.ajeet.com).

    CLI
    !
    route table RT-CUCM 
     key 1111 target-destination SG-CUCM.ajeet.com Net-CUCM
     end route table
    !

    GUI



    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 routingtables.RoutingTable - 
    Entering lookup()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 routingtables.RoutingTable - 
    Looking up 1111 in table RT-CUCM with rule exact and modifiers=none
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 routingtables.RoutingTable - 
    Entering applyModifiers()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 routingtables.RoutingTable - 
    Leaving applyModifiers(), returning 1111
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 routingtables.RoutingTable - 
    Leaving lookup()
    [REQUESTI.12] INFO  2013.02.27 19:15:59:252 nrs.XCLPrefix - 
    NRS Routing decision is: RouteTable:RT-CUCM, RouteKey:1111, 
    TargetDestination:SG-CUCM.ajeet.com, Network:Net-CUCM
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 loadbalancer.LBFactory - 
    Entering createLoadBalancer()
    [REQUESTI.12] INFO  2013.02.27 19:15:59:252 loadbalancer.LBFactory - 
    lbtype is 3(call-id)
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 loadbalancer.LBFactory - 
    Leaving createLoadBalancer()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 nrs.XCLPrefix - 
    Stored NRSAlgResult=isFound=true, isFailure=false, Response=-1, 
    Routes=[Ruri: SG-CUCM.ajeet.com, Route: null, Network: Net-CUCM, 
    q-value=1.0radvance=[502, 503]], PolicyAdvance=null
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 nrs.NRSAlgResult -
    set policyAdvance as specified in route=RouteTable:RT-CUCM, RouteKey:1111, 
    TargetDestination:SG-CUCM.ajeet.com, Network:Net-CUCM
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:252 nrs.NRSAlgResult - 
    no policyAdvance specified in route
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:253 nrs.NRSAlgResult - 
    set policyAdvance as specified in algorithm={lookupkeymodifier=
    [ RegexModifier: match= 4082022102, replace= 1111, ignore case= false], 
    lookuprule=0, lookupfield=45, lookuplenght=-1, lookuptable=RT-CUCM, 
    sequence=100, algorithm=1}
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:253 nrs.NRSAlgResult - 
    no policyAdvance specified in algorithm
  8. Se ejecuta la secuencia de la Poste-normalización.

    Note: Este decorado no utiliza la Poste-normalización, que es porqué la Poste-normalización se salta en las depuraciones.



    CLI
    trigger post-normalization sequence 1 policy
    UC520-Four-to-Full condition TC-UC520-to-PSTN

    GUI


    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 util.Normalization - 
    Entering Normalization(moduleRequest:post-normalize)
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 conditions.RegexCondition - 
    inNetwork='Net-PSTN'
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 conditions.RegexCondition - 
    IN_NETWORK: Net-PSTN
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 conditions.AbstractRegexCondition -
    pattern(^\QNet-From-UC520\E$), toMatch(Net-PSTN) returning false
    [REQUESTI.12] INFO  2013.02.27 19:15:59:254 util.Normalization -
    skipping post-normalize, due to either no trigger is configured or triggers 
    did not evaluate to true or is configured to by-pass
  9. La configuración del grupo de servidores se controla para encontrar la dirección IP del elemento, y la llamada se encamina al mejor posible de la ruta basado en el Q-valor y la configuración de la ponderación.

    CLI
    !
    server-group sip group SG-CUCM.ajeet.com Net-CUCM 
     element ip-address 14.128.64.191 5060 udp q-value 1 weight 50 
     element ip-address 14.128.64.192 5060 udp q-value 1.0 weight 100 
     failover-resp-codes 503
     lbtype global
     ping
     end server-group
    !

    GUI


    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 loadbalancer.LBFactory - 
    Entering createLoadBalancer()
    [REQUESTI.12] INFO  2013.02.27 19:15:59:254 loadbalancer.LBFactory - 
    lbtype is 0(global)
    [REQUESTI.12] INFO  2013.02.27 19:15:59:254 loadbalancer.LBFactory - 
    Default lbtype is 3(call-id)
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 loadbalancer.LBFactory - 
    Leaving createLoadBalancer()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 loadbalancer.LBBase - 
    Entering getServer()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 loadbalancer.LBBase - 
    Entering initializeDomains()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 servergroups.
    ServerGlobalStateWrapper - Net-CUCM:14.128.64.191:5060:1 
    numTries=2--->isServerAvailable(): true
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:254 servergroups.
    ServerGlobalStateWrapper - Net-CUCM:14.128.64.192:5060:1 
    numTries=2--->isServerAvailable(): true
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 servergroups.AbstractNextHop -
    Entering compareDomainNames()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 servergroups.AbstractNextHop -
    Leaving compareDomainNames()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 loadbalancer.LBBase - 
    Leaving initializeDomains()
    [REQUESTI.12] INFO  2013.02.27 19:15:59:255 loadbalancer.LBHashBased - 
    list of elements in order on which load balancing is done : 
    {reSgElementWeight=50, reSgElementSgName=SG-CUCM.ajeet.com, 
    reSgElementTransport=UDP, reSgElementQValue=1.0, reSgElementPort=5060, 
    reSgElementHost=14.128.64.191}, {reSgElementWeight=100, reSgElementSgName=
    SG-CUCM.ajeet.com, reSgElementTransport=UDP, reSgElementQValue=1.0, 
    reSgElementPort=5060, reSgElementHost=14.128.64.192},
     [REQUESTI.12] INFO  2013.02.27 19:15:59:255 loadbalancer.LBHashBased - 
    Hashing on F3E5F396-804811E2-9818EC62-1B7185EE@14.128.100.150
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 loadbalancer.DsHashAlgorithm - 
    Entering selectIndex()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 loadbalancer.DsHashAlgorithm - 
    Leaving selectIndex()
    [REQUESTI.12] INFO  2013.02.27 19:15:59:255 loadbalancer.LBHashBased - 
    Index selected 0
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 servergroups.AbstractNextHop - 
    Entering compareDomainNames()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 servergroups.AbstractNextHop - 
    Leaving compareDomainNames()
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 loadbalancer.LBBase - 
    Server group SG-CUCM.ajeet.com selected {reSgElementWeight=50, 
    reSgElementSgName=SG-CUCM.ajeet.com, reSgElementTransport=UDP, 
    reSgElementQValue=1.0, reSgElementPort=5060, reSgElementHost=14.128.64.191}
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:255 loadbalancer.LBBase - 
    Leaving getServer()
  10. El SORBO INVITA se envía al elemento seleccionado.
    [REQUESTI.12] DEBUG 2013.02.27 19:15:59:256 DsSipLlApi.Wire - 
    Sending UDP packet on 14.128.100.169:32771, destination 14.128.64.191:5060
    INVITE sip:4082022102@SG-CUCM.ajeet.com SIP/2.0
    Via: SIP/2.0/UDP 14.128.100.169:5061;branch=z9hG4bK.ToYJFeKMyfZGySv.gcLjg~~231
    Via: SIP/2.0/UDP 14.128.100.150:5060;branch=z9hG4bK21F2555
    Max-Forwards: 68
    To: <sip:4082022102@14.128.100.169>
    From: "4082025555" <sip:4082025555@14.128.100.150>;tag=81D7430C-1D2
    Contact: <sip:4082025555@14.128.100.150:5060>
    Expires: 180
    Remote-Party-ID: "4082025555" <sip:4082025555@14.128.100.150
    >;party=calling;screen=yes;privacy=off
    Call-ID: F3E5F396-804811E2-9818EC62-1B7185EE@14.128.100.150
    CSeq: 101 INVITE
    Content-Length: 410
    Date: Wed, 27 Feb 2013 19:15:59 GMT
    Supported: 100rel,timer,resource-priority,replaces,sdp-anat
    Min-SE: 1800
    Cisco-Guid: 4091813662-2152206818-2551376994-0460424686
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER,
     SUBSCRIBE, NOTIFY, INFO, REGISTER
    Timestamp: 1361992559
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required

    v=0
    o=CiscoSystemsSIP-GW-UserAgent 1007 629 IN IP4 14.128.100.150
    s=SIP Call
    c=IN IP4 14.128.100.150
    t=0 0
    m=audio 16930 RTP/AVP 18 101
    c=IN IP4 14.128.100.150
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    m=video 17954 RTP/AVP 97
    c=IN IP4 14.128.100.150
    b=TIAS:1000000
    a=rtpmap:97 H264/90000
    a=fmtp:97 profile-level-id=42801E;packetization-mode=0

    Note: Algunos dispositivos, tales como CUCM, validan el Identificador de recursos uniformes (URI) de las peticiones antes de que las procesen, así que significa que el dispositivo del extremo pudo necesitar ser configurado con el nombre de dominio completo (FQDN) para tener en cuenta esto.

    En el caso de CUCM, CUCM > el sistema > el parámetro Enterprise > Clusterwide Domain Configuration (Configuración del dominio) > nombre de dominio completo del racimo deben ser lo mismo que el nombre de grupo de servidores.

Escenario 2

Flujo de la llamada: Teléfono 1 IP -- CUCM -- SORBO -- CAMBIO DE SIGNO -- SORBO -- CME -- Teléfono 2 IP

Marque 202 2222 del teléfono 2. 408 IP debe ser prefijado con la Pre-normalización para alcanzar el teléfono 1. IP.

El CME actúa como PSTN en este decorado.

  1. El SORBO INVITA viene al CAMBIO DE SIGNO de CUCM.
    [DsTransportListener-0] DEBUG 2013.02.28 00:34:03:370 DsSipLlApi.Wire - 
    Received UDP packet on 14.128.100.169:5061 ,source 14.128.64.192:5060
    INVITE sip:2022222@14.128.100.169:5061 SIP/2.0
    Via: SIP/2.0/UDP 14.128.64.192:5060;branch=z9hG4bK18012ae333f
    From: "SJ Phone 1" <sip:2001@14.128.64.192>;
    tag=534264~c1b77ee1-4af9-4a41-aed3-3846cd699427-49616146
    To: <sip:2022222@14.128.100.169>
    Date: Thu, 28 Feb 2013 00:34:03 GMT
    Call-ID: 8be55500-12e1a5fb-ab-c040800e@14.128.64.192
    Supported: timer,resource-priority,replaces
    Min-SE:  1800
    User-Agent: Cisco-CUCM8.6
    Allow: INVITE, OPTIONS, INFO, BYE, CANCEL, ACK, PRACK, UPDATE,
     REFER, SUBSCRIBE, NOTIFY
    CSeq: 101 INVITE
    Expires: 180
    Allow-Events: presence, kpml
    Supported: X-cisco-srtp-fallback,X-cisco-original-called
    Call-Info: <sip:14.128.64.192:5060>
    ;method="NOTIFY;Event=telephone-event;Duration=500"
    Cisco-Guid: 2347062528-0000065536-0000000107-3225452558
    Session-Expires:  1800
    P-Asserted-Identity: "SJ Phone 1" <sip:2001@14.128.64.192>
    Remote-Party-ID: "SJ Phone 1" <sip:2001@14.128.64.192>
    ;party=calling;screen=yes;privacy=off
    Contact: <sip:2001@14.128.64.192:5060>
    Max-Forwards: 70
    Content-Length: 0

    --- end of packet ---
  2. La llamada se valida en la configuración de la red (red-CUCM) que hace juego.

    CLI
    sip listen Net-CUCM udp 14.128.100.169 5061 

    !
    sip network Net-CUCM standard 
     no non-invite-provisional 
     allow-connections
     retransmit-count invite-client-transaction 3 
     retransmit-count invite-server-transaction 5 
     retransmit-count non-invite-client-transaction 3 
     retransmit-timer T1 500 
     retransmit-timer T2 4000 
     retransmit-timer T4 5000 
     retransmit-timer TU1 5000 
     retransmit-timer TU2 32000 
     retransmit-timer clientTn 64000 
     retransmit-timer serverTn 64000 
     tcp connection-setup-timeout 1000 
     udp max-datagram-size 1500 
     end network
    !

    GUI


    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:373 conditions.RegexCondition - 
    inNetwork='Net-CUCM'
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:373 conditions.RegexCondition - 
    IN_NETWORK: Net-CUCM
  3. Se ejecuta la secuencia de la Pre-normalización.

    CLI
    trigger pre-normalization sequence 1 policy CUCM-Prefix-408 
    condition TC-from-CUCM 

    !
    policy normalization CUCM-Prefix-408
     uri-component update request-uri user 2022222 4082022222
     end policy
    !

    GUI



    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:373 util.Normalization - 
    Entering Normalization(moduleRequest:pre-normalize
    )[REQUESTI.12] DEBUG 2013.02.28 00:34:03:373 conditions.RegexCondition - 
    inNetwork='Net-CUCM'
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:373 conditions.RegexCondition - 
    IN_NETWORK: Net-CUCM
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.AbstractRegexCondition - 
    pattern(^\QNet-CUCM\E$), toMatch(Net-CUCM) returning true
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 triggers.ModuleTrigger - 
    ModuleTrigger.eval() action<CUCM-Prefix-408> actionParameter<>
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 triggers.ModuleTrigger - 
    ModuleTrigger.eval() got the policy, executing it ...
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 normalization.
    URIComponentNormalizationAlgorithm - normalizing request-uri
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 normalization.
    URIComponentNormalizationAlgorithm - 
    updating user/phone of the sip:2022222@14.128.100.169:5061 to 4082022222
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 util.Normalization -
     Leaving Normalization.normalize()
  4. Se corresponde con la condición del activador (TC-de-CUCM).

    CLI
    !
    trigger condition TC-from-CUCM
     sequence 1 
      in-network ^\QNet-CUCM\E$
      end sequence
     end trigger condition
    !

    GUI


    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.RegexCondition - 
    inNetwork='Net-CUCM'
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.RegexCondition - 
    IN_NETWORK: Net-CUCM
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.AbstractRegexCondition - 
    pattern(^\QNet-CUCM\E$), toMatch(Net-CUCM) returning true
  5. La configuración del activador de la encaminamiento se controla para descubrir la directiva de la ruta (Directiva-a-PSTN) esa las coincidencias basadas en la condición del activador (TC-de-CUCM).

    CLI
    trigger routing sequence 2 policy Policy-to-PSTN condition TC-from-CUCM

    GUI


    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.RegexCondition - 
    inNetwork='Net-CUCM'
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.RegexCondition - 
    IN_NETWORK: Net-CUCM
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:374 conditions.AbstractRegexCondition -
    pattern(^\QNet-CUCM\E$), toMatch(Net-CUCM) returning true
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 triggers.ModuleTrigger - 
    ModuleTrigger.eval() action<Policy-to-PSTN> actionParameter<>
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 triggers.ModuleTrigger - 
    ModuleTrigger.eval() got the policy, executing it ...
  6. La configuración de la directiva de la ruta (Directiva-a-PSTN) se controla para encontrar la tabla de la ruta (RT-PSTN) esa las coincidencias.

    CLI
    !
    policy lookup Policy-to-PSTN
     sequence 100 RT-PSTN request-uri uri-component user
      rule exact
      end sequence
     end policy
    !

    GUI



    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 nrs.XCLPrefix - 
    Entering getKeyValue()
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 nrs.FieldSelector - 
    getUriPart: URI - sip:4082022222@14.128.100.169:5061 part 6
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 nrs.FieldSelector - 
    Requested field 45
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 nrs.FieldSelector - 
    Returning key 4082022222
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 nrs.XCLPrefix - 
    Leaving getKeyValue()
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:375 modules.XCLLookup - 
    table=RT-PSTN, key=4082022222
    [REQUESTI.12] INFO  2013.02.28 00:34:03:376 modules.XCLLookup - 
    table is RT-PSTN
  7. La configuración de la tabla de la ruta (RT-PSTN) se controla para encontrar el destino de la blanco (SG-PSTN).

    CLI
    !
    route table RT-PSTN 
     key 4082022222 target-destination SG-PSTN Net-PSTN
     end route table
    !

    GUI



    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 routingtables.RoutingTable -
    Entering lookup()
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 routingtables.RoutingTable - 
    Looking up 4082022222 in table RT-PSTN with rule exact and modifiers=none
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 routingtables.RoutingTable - 
    Entering applyModifiers()
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 routingtables.RoutingTable - 
    Leaving applyModifiers(), returning 4082022222
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 routingtables.RoutingTable - 
    Leaving lookup()
    [REQUESTI.12] INFO  2013.02.28 00:34:03:376 nrs.XCLPrefix - 
    NRS Routing decision is: RouteTable:RT-PSTN, RouteKey:4082022222, 
    TargetDestination:SG-PSTN, Network:Net-PSTN
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 loadbalancer.LBFactory - 
    Entering createLoadBalancer()
    [REQUESTI.12] INFO  2013.02.28 00:34:03:376 loadbalancer.LBFactory - 
    lbtype is 3(call-id)
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 loadbalancer.LBFactory - 
    Leaving createLoadBalancer()
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 nrs.XCLPrefix - 
    Stored NRSAlgResult=isFound=true, isFailure=false, Response=-1, 
    Routes=[Ruri: SG-PSTN, Route: null, Network: Net-PSTN, q-value=1.
    0radvance=[502, 503]], PolicyAdvance=null
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 nrs.NRSAlgResult - 
    set policyAdvance as specified in route=RouteTable:RT-PSTN, RouteKey:4082022222,
    TargetDestination:SG-PSTN, Network:Net-PSTN
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 nrs.NRSAlgResult - 
    no policyAdvance specified in route
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 nrs.NRSAlgResult - 
    set policyAdvance as specified in algorithm={lookuprule=0, lookupfield=45, 
    lookuplenght=-1, lookuptable=RT-PSTN, sequence=100, algorithm=1}
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:376 nrs.NRSAlgResult - 
    no policyAdvance specified in algorithm
  8. Se ejecuta la secuencia de la Poste-normalización.

    CLI
    trigger post-normalization sequence 1 policy UC520-Four-to-Full 
    condition TC-UC520-to-PSTN 
    !

    GUI


    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 util.Normalization - 
    Entering Normalization(moduleRequest:post-normalize)
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 conditions.RegexCondition - 
    inNetwork='Net-CUCM'
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 conditions.RegexCondition - 
    IN_NETWORK: Net-CUCM
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 conditions.AbstractRegexCondition - 
    pattern(^\QNet-From-UC520\E$), toMatch(Net-CUCM) returning false
    [REQUESTI.12] INFO  2013.02.28 00:34:03:378 util.Normalization - 
    skipping post-normalize, due to either no trigger is configured or triggers 
    did not evaluate to true or is configured to by-pass
  9. La configuración del grupo de servidores (SG-PSTN) se controla para encontrar la dirección IP del elemento, y la llamada se encamina al mejor posible de la ruta basado en el Q-valor y la configuración de la ponderación.

    CLI
    !
    server-group sip group SG-PSTN Net-PSTN 
     element ip-address 14.128.100.150 5060 udp q-value 1.0 weight 0 
     failover-resp-codes 503
     lbtype global
     ping
     end server-group
    !

    GUI


    DEPURACIÓN
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 loadbalancer.LBFactory - 
    Entering createLoadBalancer()
    [REQUESTI.12] INFO  2013.02.28 00:34:03:378 loadbalancer.LBFactory - 
    lbtype is 0(global)
    [REQUESTI.12] INFO  2013.02.28 00:34:03:378 loadbalancer.LBFactory - 
    Default lbtype is 3(call-id)
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 loadbalancer.LBFactory - 
    Leaving createLoadBalancer()
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 loadbalancer.LBBase - 
    Entering getServer()
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 loadbalancer.LBBase - 
    Entering initializeDomains()
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 servergroups.
    ServerGlobalStateWrapper - Net-PSTN:14.128.100.150:5060:1 numTries=
    2--->isServerAvailable(): true
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 loadbalancer.LBBase - 
    Leaving initializeDomains()
    [REQUESTI.12] INFO  2013.02.28 00:34:03:378 loadbalancer.LBHashBased - 
    list of elements in order on which load balancing is done : 
    {reSgElementWeight=0, reSgElementSgName=SG-PSTN, reSgElementTransport=UDP, 
    reSgElementQValue=1.0, reSgElementPort=5060, reSgElementHost=14.128.100.150}
    , [REQUESTI.12] DEBUG 2013.02.28 00:34:03:378 servergroups.AbstractNextHop - 
    Entering compareDomainNames()
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:379 servergroups.AbstractNextHop - 
    Leaving compareDomainNames()
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:379 loadbalancer.LBBase - 
    Server group SG-PSTN selected {reSgElementWeight=0, reSgElementSgName=SG-PSTN, 
    reSgElementTransport=UDP, reSgElementQValue=1.0, reSgElementPort=5060, 
    reSgElementHost=14.128.100.150}
    [REQUESTI.12] DEBUG 2013.02.28 00:34:03:379 loadbalancer.LBBase - 
    Leaving getServer()
  10. El SORBO INVITA se envía al elemento seleccionado.
    [CT_CALLBACK.13] DEBUG 2013.02.28 00:34:06:260 DsSipLlApi.Wire - 
    Sending UDP packet on 14.128.100.169:32772, destination 14.128.64.192:
    5060SIP/2.0 200 OK
    Via: SIP/2.0/UDP 14.128.64.192:5060;branch=z9hG4bK18012ae333f
    To: <sip:2022222@14.128.100.169>;tag=82FA7450-F53
    From: "SJ Phone 1" <sip:2001@14.128.64.192>
    ;tag=534264~c1b77ee1-4af9-4a41-aed3-3846cd699427-49616146
    Contact: <sip:4082022222@14.128.100.150:5060>
    Require: timer
    Remote-Party-ID: <sip:4082022222@14.128.100.150>
    ;party=called;screen=no;privacy=off
    Call-ID: 8be55500-12e1a5fb-ab-c040800e@14.128.64.192
    CSeq: 101 INVITE
    Content-Length: 276
    Date: Thu, 28 Feb 2013 00:34:03 GMT
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, 
    SUBSCRIBE, NOTIFY, INFO, REGISTER
    Allow-Events: telephone-event
    Supported: replaces
    Supported: sdp-anat
    Supported: timer
    Server: Cisco-SIPGateway/IOS-12.x
    Session-Expires: 1800;refresher=uac
    Content-Type: application/sdp
    Content-Disposition: session;handling=required

    v=0
    o=CiscoSystemsSIP-GW-UserAgent 6810 2753 IN IP4 14.128.100.150
    s=SIP Call
    c=IN IP4 14.128.100.150
    t=0 0
    m=audio 16862 RTP/AVP 18 101
    c=IN IP4 14.128.100.150
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20

Decorado 3

Flujo de la llamada: Teléfono 1 IP -- CME 1 -- SORBO -- CAMBIO DE SIGNO -- SORBO --  CME 2 -- Teléfono 2 IP

Marque 4001 o 4002 del teléfono 1 IP para alcanzar las Extensiones en el teléfono 2. IP.

El CME 2 es UC520 en este decorado y el CME 1 actúa como PSTN.

  1. El SORBO INVITA viene al CAMBIO DE SIGNO de CME 1 (PSTN). 
    [DsTransportListener-3] DEBUG 2013.02.28 05:28:57:360 DsSipLlApi.Wire - 
    Received UDP packet on 14.128.100.169:5062 ,source 14.128.100.150:56578
    INVITE sip:4002@14.128.100.169:5062 SIP/2.0
    Via: SIP/2.0/UDP 14.128.100.150:5060;branch=z9hG4bK2292567
    Remote-Party-ID: <sip:85224044444@14.128.100.150>
    ;party=calling;screen=no;privacy=off
    From: <sip:85224044444@14.128.100.150>;tag=84086F7C-10B8
    To: <sip:4002@14.128.100.169>
    Date: Thu, 28 Feb 2013 05:28:57 GMT
    Call-ID: 9559E957-809E11E2-9856EC62-1B7185EE@14.128.100.150
    Supported: 100rel,timer,resource-priority,replaces,sdp-anat
    Min-SE:  1800
    Cisco-Guid: 2446255913-2157842914-2555505762-0460424686
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER,
     SUBSCRIBE, NOTIFY, INFO, REGISTER
    CSeq: 101 INVITE
    Max-Forwards: 70
    Timestamp: 1362029337
    Contact: <sip:85224044444@14.128.100.150:5060>
    Expires: 180
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required
    Content-Length: 276

    v=0
    o=CiscoSystemsSIP-GW-UserAgent 3653 4016 IN IP4 14.128.100.150
    s=SIP Call
    c=IN IP4 14.128.100.150
    t=0 0
    m=audio 19202 RTP/AVP 18 101
    c=IN IP4 14.128.100.150
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20

    --- end of packet ---
  2. La llamada se valida en la configuración de la red (Net-UC520) que hace juego.

    CLI
    sip listen Net-UC520 udp 14.128.100.169 5062

     !
    sip network Net-From-UC520 standard 
     no non-invite-provisional 
     allow-connections
     retransmit-count invite-client-transaction 3 
     retransmit-count invite-server-transaction 5 
     retransmit-count non-invite-client-transaction 3
      retransmit-timer T1 500
      retransmit-timer T2 4000
      retransmit-timer T4 5000
      retransmit-timer TU1 5000
      retransmit-timer TU2 32000
      retransmit-timer clientTn 64000
      retransmit-timer serverTn 64000
      tcp connection-setup-timeout 1000
      udp max-datagram-size 1500
      end network
    !

    GUI


    DEPURACIÓN

    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:362 conditions.RegexCondition - 
    inNetwork='Net-UC520'
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:362 conditions.RegexCondition - 
    IN_NETWORK: Net-UC520
  3. Se ejecuta la secuencia de la Pre-normalización.

    CLI
    trigger pre-normalization sequence 1 policy CUCM-Prefix-408 condition 
    TC-from-CUCM
    GUI


    DEPURACIÓN
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:362 util.Normalization -
    Entering Normalization(moduleRequest:pre-normalize)
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:362 conditions.RegexCondition - 
    inNetwork='Net-UC520'
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:362 conditions.RegexCondition - 
    IN_NETWORK: Net-UC520
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:362 conditions.AbstractRegexCondition - 
    pattern(^\QNet-CUCM\E$), toMatch(Net-UC520) returning false
    [REQUESTI.10] INFO  2013.02.28 05:28:57:362 util.Normalization - 
    skipping pre-normalize, due to either no trigger is configured or triggers 
    did not evaluate to true or is configured to by-pass
  4. Se corresponde con la condición del activador (TC-PSTN-to-UC520).

    CLI
    !
    trigger condition TC-PSTN-to-UC520
     sequence 1 
      in-network ^\QNet-UC520\E$
      end sequence
     end trigger condition
    !

    GUI


    DEPURACIÓN
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 conditions.RegexCondition - 
    inNetwork='Net-UC520'
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 conditions.RegexCondition - 
    IN_NETWORK: Net-UC520
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 conditions.AbstractRegexCondition -
    pattern(^\QNet-UC520\E$), toMatch(Net-UC520) returning true
  5. La configuración del activador de la encaminamiento se controla para encontrar la directiva de la ruta (Policy-UC520) esa las coincidencias basadas en la condición del activador (TC-PSTN-to-UC520).

    CLI
    trigger routing sequence 3 policy Policy-UC520 condition TC-PSTN-to-UC520
    GUI


    DEPURACIÓN
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 triggers.ModuleTrigger - 
    ModuleTrigger.eval() action<Policy-UC520> actionParameter<>
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 triggers.ModuleTrigger - 
    ModuleTrigger.eval() got the policy, executing it ...
  6. La configuración de la directiva de la ruta (Policy-UC520) se controla para encontrar la tabla de la ruta (RT-UC520) esa las coincidencias.

    CLI
    !
    policy lookup Policy-UC520
     sequence 100 RT-UC520 request-uri uri-component user
      modify-key 400[12] 2222
      rule exact
      end sequence
     end policy
    !

    GUI



    DEPURACIÓN
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.XCLPrefix - 
    Entering getKeyValue()
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.FieldSelector - 
    getUriPart: URI - sip:4002@14.128.100.169:5062 part 6
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.FieldSelector - 
    Requested field 45
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.FieldSelector - 
    Returning key 4002
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.FieldSelector - 
    Retrieved Modifier  RegexModifier: match= 400[12], replace= 2222, 
    ignore case= false
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.FieldSelector - 
    Input field: 4002
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.FieldSelector - 
    Modified field: 2222
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 nrs.XCLPrefix - 
    Leaving getKeyValue()
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:363 modules.XCLLookup - 
    table=RT-UC520, key=2222
    [REQUESTI.10] INFO  2013.02.28 05:28:57:364 modules.XCLLookup - 
    table is RT-UC520
  7. La configuración de la tabla de la ruta (RT-UC520) se controla para encontrar el destino de la blanco (RG-UC520).

    CLI
    !
    route table RT-UC520 
     key 2222 group RG-UC520
     end route table
    !
    GUI



    DEPURACIÓN
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 routingtables.RoutingTable - 
    Entering lookup()
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 routingtables.RoutingTable - 
    Looking up 2222 in table RT-UC520 with rule exact and modifiers=none
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 routingtables.RoutingTable - 
    Entering applyModifiers()
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 routingtables.RoutingTable - 
    Leaving applyModifiers(), returning 2222
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 routingtables.RoutingTable - 
    Leaving lookup()
    [REQUESTI.10] INFO  2013.02.28 05:28:57:364 nrs.XCLPrefix - 
    NRS Routing decision is: RouteTable:RT-UC520, RouteKey:2222, RouteGroup:RG-UC520
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 loadbalancer.LBFactory - 
    Entering createLoadBalancer()
    [REQUESTI.10] INFO  2013.02.28 05:28:57:364 loadbalancer.LBFactory - 
    lbtype is 3(call-id)
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 loadbalancer.LBFactory - 
    Leaving createLoadBalancer()
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 nrs.XCLPrefix - 
    Stored NRSAlgResult=isFound=true, isFailure=false, Response=-1, 
    Routes=[Ruri: SG-UC520, Route: null, Network: Net-UC520, q-value=1.
    0radvance=[502, 503]], PolicyAdvance=null
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 nrs.NRSAlgResult - 
    set policyAdvance as specified in route=RouteTable:RT-UC520, RouteKey:2222, 
    RouteGroup:RG-UC520
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 nrs.NRSAlgResult - 
    no policyAdvance specified in route
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 nrs.NRSAlgResult - 
    set policyAdvance as specified in algorithm={lookupkeymodifier=
    [ RegexModifier: match= 400[12], replace= 2222, ignore case= false], 
    lookuprule=0, lookupfield=45, lookuplenght=-1, lookuptable=RT-UC520, 
    sequence=100, algorithm=1}
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:364 nrs.NRSAlgResult - 
    no policyAdvance specified in algorithm
  8. Se ejecuta la secuencia de la Poste-normalización.

    CLI
    trigger post-normalization sequence 1 policy UC520-Four-to-Full 
    condition TC-UC520-to-PSTN
    GUI


    DEPURACIÓN
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 util.Normalization - 
    Entering Normalization(moduleRequest:post-normalize)
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 conditions.RegexCondition - 
    inNetwork='Net-UC520'
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 conditions.RegexCondition - 
    IN_NETWORK: Net-UC520
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 conditions.AbstractRegexCondition - 
    pattern(^\QNet-From-UC520\E$), toMatch(Net-UC520) returning false
    [REQUESTI.10] INFO  2013.02.28 05:28:57:365 util.Normalization - 
    skipping post-normalize, due to either no trigger is configured or 
    triggers did not evaluate to true or is configured to by-pass
  9. La configuración de grupo de la ruta se controla para encontrar la dirección IP del elemento, y la llamada se encamina al mejor posible de la ruta basado en el Q-valor y el parámetro de peso.

    CLI
    !
    route group RG-UC520 
     element target-destination SG-UC520 Net-UC520 q-value 1.0 
      failover-codes 502 - 503 
      weight 0 
      end element
     end route
    !

    !
    server-group sip group SG-UC520 Net-UC520 
     element ip-address 14.128.100.161 5060 udp q-value 1.0 weight 0 
     failover-resp-codes 503
     lbtype global
     ping
     end server-group
    !

    GUI




    DEPURACIÓN
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 loadbalancer.LBFactory - 
    Entering createLoadBalancer()
    [REQUESTI.10] INFO  2013.02.28 05:28:57:365 loadbalancer.LBFactory - 
    lbtype is 0(global)
    [REQUESTI.10] INFO  2013.02.28 05:28:57:365 loadbalancer.LBFactory - 
    Default lbtype is 3(call-id)
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 loadbalancer.LBFactory - 
    Leaving createLoadBalancer()
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 loadbalancer.LBBase - 
    Entering getServer()
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 loadbalancer.LBBase - 
    Entering initializeDomains()
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:365 servergroups.
    ServerGlobalStateWrapper - Net-UC520:14.128.100.161:5060:1 numTries=
    2--->isServerAvailable(): true
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:366 loadbalancer.LBBase - 
    Leaving initializeDomains()
    [REQUESTI.10] INFO  2013.02.28 05:28:57:366 loadbalancer.LBHashBased - 
    list of elements in order on which load balancing is done : 
    {reSgElementWeight=0, reSgElementSgName=SG-UC520, reSgElementTransport=UDP, 
    reSgElementQValue=1.0, reSgElementPort=5060, reSgElementHost=14.128.100.161},
     [REQUESTI.10] DEBUG 2013.02.28 05:28:57:366 servergroups.AbstractNextHop - 
    Entering compareDomainNames()
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:366 servergroups.AbstractNextHop - 
    Leaving compareDomainNames()
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:366 loadbalancer.LBBase - 
    Server group SG-UC520 selected {reSgElementWeight=0, reSgElementSgName=SG-UC520, 
    reSgElementTransport=UDP, reSgElementQValue=1.0, reSgElementPort=5060,
    reSgElementHost=14.128.100.161}
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:366 loadbalancer.LBBase - 
    Leaving getServer()
  10. El SORBO INVITA se envía al elemento seleccionado.
    [REQUESTI.10] DEBUG 2013.02.28 05:28:57:367 DsSipLlApi.Wire - 
    Sending UDP packet on 14.128.100.169:32773, destination 14.128.100.161:5060
    INVITE sip:4002@SG-UC520 SIP/2.0
    Via: SIP/2.0/UDP 
    14.128.100.169:5062;branch=z9hG4bK.ToYJFeKMyfZGySv.gcLjg~~237
    Via: SIP/2.0/UDP 14.128.100.150:5060;branch=z9hG4bK2292567
    Max-Forwards: 69
    To: <sip:4002@14.128.100.169>
    From: <sip:85224044444@14.128.100.150>;tag=84086F7C-10B8
    Contact: <sip:85224044444@14.128.100.150:5060>
    Expires: 180
    Remote-Party-ID: <sip:85224044444@14.128.100.150>
    ;party=calling;screen=no;privacy=off
    Call-ID: 9559E957-809E11E2-9856EC62-1B7185EE@14.128.100.150
    CSeq: 101 INVITE
    Content-Length: 276
    Date: Thu, 28 Feb 2013 05:28:57 GMT
    Supported: 100rel,timer,resource-priority,replaces,sdp-anat
    Min-SE: 1800
    Cisco-Guid: 2446255913-2157842914-2555505762-0460424686
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER,
     SUBSCRIBE, NOTIFY, INFO, REGISTER
    Timestamp: 1362029337
    Allow-Events: telephone-event
    Content-Type: application/sdp
    Content-Disposition: session;handling=required

    v=0
    o=CiscoSystemsSIP-GW-UserAgent 3653 4016 IN IP4 14.128.100.150
    s=SIP Call
    c=IN IP4 14.128.100.150
    t=0 0
    m=audio 19202 RTP/AVP 18 101
    c=IN IP4 14.128.100.150
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20

Situación 4

Flujo de la llamada: Teléfono 1 IP -- CME 1 -- SORBO -- CAMBIO DE SIGNO -- SORBO -- CME 2 -- Teléfono 2 IP

Marque 4444 del teléfono 2 IP que se cambia a 415 240 4444 con la Poste-normalización para alcanzar el teléfono 1. IP.

El CME 2 es UC520 en este decorado y el CME 1 actúa como PSTN.

  1. El SORBO INVITA viene al CAMBIO DE SIGNO de CME 2 (UC520).
    [DsTransportListener-1] DEBUG 2013.02.28 07:06:57:220 DsSipLlApi.Wire - 
    Received UDP packet on 14.128.100.169:5063 ,source 14.128.100.161:59404
    INVITE sip:4444@14.128.100.169:5063 SIP/2.0
    Date: Thu, 28 Feb 2013 07:09:20 GMT
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER, 
    SUBSCRIBE, NOTIFY, INFO, REGISTER
    From: <sip:4001@14.128.100.161>;tag=256D566C-22AC
    Allow-Events: telephone-event
    Supported: 100rel,timer,resource-priority,replaces,sdp-anat
    Min-SE:  1800
    Remote-Party-ID: <sip:4001@14.128.100.161>
    ;party=calling;screen=no;privacy=off
    Cisco-Guid: 2598740490-2158760418-2150671243-2598404062
    Timestamp: 1362035360
    Content-Length: 543
    User-Agent: Cisco-SIPGateway/IOS-12.x
    To: <sip:4444@14.128.100.169>
    Contact: <sip:4001@14.128.100.161:5060>
    Expires: 180
    Content-Type: multipart/mixed;boundary=uniqueBoundary
    Call-ID: 9B62C157-80AC11E2-8035A38B-9AE07FDE@14.128.100.161
    Via: SIP/2.0/UDP 14.128.100.161:5060;branch=z9hG4bK21E82
    CSeq: 101 INVITE
    Max-Forwards: 70
    Mime-Version: 1.0

    --uniqueBoundary
    Content-Type: application/sdp
    Content-Disposition: session;handling=required

    v=0
    o=CiscoSystemsSIP-GW-UserAgent 3418 2914 IN IP4 14.128.100.161
    s=SIP Call
    c=IN IP4 14.128.100.161
    t=0 0
    m=audio 17618 RTP/AVP 18 101
    c=IN IP4 14.128.100.161
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20

    --uniqueBoundary
    Content-Type: application/gtd
    Content-Disposition: signal;handling=optional

    IAM,
    GCI,9ae5a20a80ac11e28030a38b9ae07fde

    --- end of packet ---
  2. La llamada se valida en la configuración de la red (Net-From-UC520) que hace juego.

    CLI
    sip listen Net-From-UC520 udp 14.128.100.169 5063
     !
    sip network Net-From-UC520 standard
      no non-invite-provisional
      allow-connections
     retransmit-count invite-client-transaction 3
      retransmit-count invite-server-transaction 5
      retransmit-count non-invite-client-transaction 3
      retransmit-timer T1 500 
     retransmit-timer T2 4000
      retransmit-timer T4 5000
      retransmit-timer TU1 5000
      retransmit-timer TU2 32000
      retransmit-timer clientTn 64000
      retransmit-timer serverTn 64000
      tcp connection-setup-timeout 1000
      udp max-datagram-size 1500
      end network
    !

    GUI


    DEPURACIÓN
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.RegexCondition - 
    inNetwork='Net-From-UC520'
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.RegexCondition - 
    IN_NETWORK: Net-From-UC520
  3. Se ejecuta la secuencia de la Pre-normalización.

    CLI
    trigger pre-normalization sequence 1 policy CUCM-Prefix-408 condition 
    TC-from-CUCM
    GUI


    DEPURACIÓN
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 util.Normalization - 
    Entering Normalization(moduleRequest:pre-normalize)
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.RegexCondition - 
    inNetwork='Net-From-UC520'
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.RegexCondition - 
    IN_NETWORK: Net-From-UC520
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.AbstractRegexCondition - 
    pattern(^\QNet-CUCM\E$), toMatch(Net-From-UC520) returning false
    [REQUESTI.5] INFO  2013.02.28 07:06:57:229 util.Normalization - 
    skipping pre-normalize, due to either no trigger is configured or triggers 
    did not evaluate to true or is configured to by-pass
  4. Se corresponde con la condición del activador (TC-UC520-to-PSTN).

    CLI
    !
    trigger condition TC-UC520-to-PSTN
     sequence 1
       in-network ^\QNet-From-UC520\E$
     end sequence
     end trigger condition
    !

    GUI


    DEPURACIÓN
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.RegexCondition - 
    inNetwork='Net-From-UC520'
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:229 conditions.RegexCondition - 
    IN_NETWORK: Net-From-UC520
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 conditions.AbstractRegexCondition - 
    pattern(^\QNet-From-UC520\E$), toMatch(Net-From-UC520) returning true
  5. La configuración del activador de la encaminamiento se controla para encontrar la directiva de la ruta (Policy-UC520-to-PSTN) esa las coincidencias basadas en la condición del activador (TC-UC520-to-PSTN).

    CLI
    trigger routing sequence 4 policy Policy-UC520-to-PSTN condition 
    TC-UC520-to-PSTN
    GUI


    DEPURACIÓN
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 triggers.ModuleTrigger - 
    ModuleTrigger.eval() action<Policy-UC520-to-PSTN> actionParameter<>
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 triggers.ModuleTrigger - 
    ModuleTrigger.eval() got the policy, executing it ...
  6. La configuración de la directiva de la ruta (Policy-UC520-to-PSTN) se controla para encontrar la tabla de la ruta (RT-UC520-PSTN) esa las coincidencias.

    CLI
    !
    policy lookup Policy-UC520-to-PSTN
     sequence 100 RT-UC520-PSTN request-uri uri-component user
      modify-key 4444 3333
      rule exact
      end sequence
     end policy
    !

    GUI



    DEPURACIÓN
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.XCLPrefix - 
    Entering getKeyValue()
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.FieldSelector - 
    getUriPart: URI - sip:4444@14.128.100.169:5063 part 6
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.FieldSelector - 
    Requested field 45
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.FieldSelector - 
    Returning key 4444
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.FieldSelector - 
    Retrieved Modifier  RegexModifier: match= 4444, replace= 3333, 
    ignore case= false
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.FieldSelector - 
    Input field: 4444
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.FieldSelector - 
    Modified field: 3333
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 nrs.XCLPrefix - 
    Leaving getKeyValue()
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 modules.XCLLookup - 
    table=RT-UC520-PSTN, key=3333
    [REQUESTI.5] INFO  2013.02.28 07:06:57:230 modules.XCLLookup - 
    table is RT-UC520-PSTN
  7. La configuración de la tabla de la ruta (RT-UC520-PSTN) se controla para encontrar el destino de la blanco (RG-UC520).

    CLI
    !
    route table RT-UC520-PSTN
      key 3333 group RG-UC520-to-PSTN
     end route table
    !
    GUI



    DEPURACIÓN
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:230 routingtables.RoutingTable - 
    Entering lookup()
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 routingtables.RoutingTable - 
    Looking up 3333 in table RT-UC520-PSTN with rule exact and modifiers=none
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 routingtables.RoutingTable - 
    Entering applyModifiers()
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 routingtables.RoutingTable - 
    Leaving applyModifiers(), returning 3333
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 routingtables.RoutingTable - 
    Leaving lookup()
    [REQUESTI.5] INFO  2013.02.28 07:06:57:231 nrs.XCLPrefix - 
    NRS Routing decision is: RouteTable:RT-UC520-PSTN, RouteKey:3333, 
    RouteGroup:RG-UC520-to-PSTN
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 loadbalancer.LBFactory - 
    Entering createLoadBalancer()
    [REQUESTI.5] INFO  2013.02.28 07:06:57:231 loadbalancer.LBFactory - 
    lbtype is 3(call-id)
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 loadbalancer.LBFactory - 
    Leaving createLoadBalancer()
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.XCLPrefix - 
    Stored NRSAlgResult=isFound=true, isFailure=false, Response=-1, 
    Routes=[Ruri: 14.128.100.150, Route: null, Network: Net-From-UC520, 
    q-value=1.0radvance=[502, 503]], PolicyAdvance=null
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.NRSAlgResult - 
    set policyAdvance as specified in route=RouteTable:RT-UC520-PSTN, 
    RouteKey:3333, RouteGroup:RG-UC520-to-PSTN
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.NRSAlgResult - 
    no policyAdvance specified in route
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.NRSAlgResult - 
    set policyAdvance as specified in algorithm={lookupkeymodifier=
    [ RegexModifier: match= 4444, replace= 3333, ignore case= false], 
    lookuprule=0, lookupfield=45, lookuplenght=-1, lookuptable=RT-UC520-PSTN, 
    sequence=100, algorithm=1}
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.NRSAlgResult - 
    no policyAdvance specified in algorithm
  8. Se ejecuta la secuencia de la Poste-normalización.

    CLI
    trigger post-normalization sequence 1 policy UC520-Four-to-Full 
    condition TC-UC520-to-PSTN 
    !
    policy normalization UC520-Four-to-Full
     uri-component update request-uri user 4444 85224044444
     end policy
    !

    GUI



    DEPURACIÓN
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 util.Normalization - 
    Entering Normalization(moduleRequest:post-normalize)
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 conditions.RegexCondition - 
    inNetwork='Net-From-UC520'
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 conditions.RegexCondition - 
    IN_NETWORK: Net-From-UC520
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 conditions.AbstractRegexCondition - 
    pattern(^\QNet-From-UC520\E$), toMatch(Net-From-UC520) returning true
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 triggers.ModuleTrigger - 
    ModuleTrigger.eval() action<UC520-Four-to-Full> actionParameter<>
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 triggers.ModuleTrigger - 
    ModuleTrigger.eval() got the policy, executing it ...
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 normalization.URIComponentNormalizationAlgorithm - 
    normalizing request-uri
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 normalization.URIComponentNormalizationAlgorithm - 
    updating user/phone of the sip:4444@14.128.100.150 to 85224044444
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 util.Normalization - 
    Leaving Normalization.normalize()
  9. La configuración de grupo de la ruta se controla para encontrar la dirección IP del elemento, y la llamada se encamina al mejor posible de la ruta basado en el Q-valor y el parámetro de peso.

    CLI
    !
    route group RG-UC520-to-PSTN 
     element target-destination 14.128.100.150 Net-From-UC520 q-value 1.0 
      failover-codes 502 - 503
       weight 0 
      end element
     end route
    !

    GUI



    DEPURACIÓN
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 loadbalancer.LBBase - 
    Entering getServer()
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 loadbalancer.LBBase - 
    Entering initializeDomains()
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.NRSRoutes - 
    routes before applying time policies: [Ruri: 14.128.100.150, 
    Route: null, Network: Net-From-UC520, q-value=1.0radvance=[502, 503]]
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 nrs.NRSRoutes - 
    routes after applying time policies: [Ruri: 14.128.100.150, Route: 
    null, Network: Net-From-UC520, q-value=1.0radvance=[502, 503]]
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:231 loadbalancer.LBBase - 
    Leaving initializeDomains()
    [REQUESTI.5] INFO  2013.02.28 07:06:57:231 loadbalancer.LBHashBased - 
    list of elements in order on which load balancing is done : Ruri: 
    14.128.100.150, Route: null, Network: Net-From-UC520, q-value=
    1.0radvance=[502, 503],
     [REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 loadbalancer.LBBase - 
    Server group route-sg selected Ruri: 14.128.100.150, Route: null, 
    Network: Net-From-UC520, q-value=1.0radvance=[502, 503]
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:232 loadbalancer.LBBase - 
    Leaving getServer()
  10. El SORBO INVITA se envía al elemento seleccionado.
    [REQUESTI.5] DEBUG 2013.02.28 07:06:57:233 DsSipLlApi.Wire - 
    Sending UDP packet on 14.128.100.169:32770, destination 14.128.100.150:5060
    INVITE sip:85224044444@14.128.100.150 SIP/2.0
    Via: SIP/2.0/UDP 
    14.128.100.169:5063;branch=z9hG4bK.ToYJFeKMyfZGySv.gcLjg~~238
    Via: SIP/2.0/UDP 14.128.100.161:5060;branch=z9hG4bK21E82
    Max-Forwards: 69
    To: <sip:4444@14.128.100.169>
    From: <sip:4001@14.128.100.161>;tag=256D566C-22AC
    Contact: <sip:4001@14.128.100.161:5060>
    Expires: 180
    Remote-Party-ID: <sip:4001@14.128.100.161>
    ;party=calling;screen=no;privacy=off
    Call-ID: 9B62C157-80AC11E2-8035A38B-9AE07FDE@14.128.100.161
    CSeq: 101 INVITE
    Content-Length: 543
    Date: Thu, 28 Feb 2013 07:09:20 GMT
    Allow: INVITE, OPTIONS, BYE, CANCEL, ACK, PRACK, UPDATE, REFER,
     SUBSCRIBE, NOTIFY, INFO, REGISTER
    Allow-Events: telephone-event
    Supported: 100rel,timer,resource-priority,replaces,sdp-anat
    Min-SE: 1800
    Cisco-Guid: 2598740490-2158760418-2150671243-2598404062
    Timestamp: 1362035360
    User-Agent: Cisco-SIPGateway/IOS-12.x
    Content-Type: multipart/mixed;boundary=uniqueBoundary
    MIME-Version: 1.0

    --uniqueBoundary
    Content-Type: application/sdp
    Content-Disposition: session;handling=required

    v=0
    o=CiscoSystemsSIP-GW-UserAgent 3418 2914 IN IP4 14.128.100.161
    s=SIP Call
    c=IN IP4 14.128.100.161
    t=0 0
    m=audio 17618 RTP/AVP 18 101
    c=IN IP4 14.128.100.161
    a=rtpmap:18 G729/8000
    a=fmtp:18 annexb=no
    a=rtpmap:101 telephone-event/8000
    a=fmtp:101 0-16
    a=ptime:20

    --uniqueBoundary
    Content-Type: application/gtd
    Content-Disposition: signal;handling=optional

    IAM,
    GCI,9ae5a20a80ac11e28030a38b9ae07fde

Configuración para los cuatro decorados

Aquí está la configuración completa del CAMBIO DE SIGNO para los cuatro escenarios de llamada descritos en este documento:

ajeesing-cusp-8.5.3(cusp)# show configuration active verbose
 Building CUSP configuration...
!
server-group sip global-load-balance call-id
server-group sip retry-after 0
server-group sip element-retries udp 2 
server-group sip element-retries tls 1 
server-group sip element-retries tcp 1
sip dns-srv
 enable 
 no naptr 
 end dns
!
no sip header-compaction 
!
sip logging 
sip max-forwards 70
sip network Net-CUCM standard 
 no non-invite-provisional 
 allow-connections
 retransmit-count invite-client-transaction 3
  retransmit-count invite-server-transaction 5 
 retransmit-count non-invite-client-transaction 3 
 retransmit-timer T1 500 
 retransmit-timer T2 4000 
 retransmit-timer T4 5000 
 retransmit-timer TU1 5000 
 retransmit-timer TU2 32000 
 retransmit-timer clientTn 64000 
 retransmit-timer serverTn 64000 
 tcp connection-setup-timeout 1000
  udp max-datagram-size 1500
  end network
!
sip network Net-From-UC520 standard 
 no non-invite-provisional 
 allow-connections
 retransmit-count invite-client-transaction 3 
 retransmit-count invite-server-transaction 5 
 retransmit-count non-invite-client-transaction 3 
 retransmit-timer T1 500 
 retransmit-timer T2 4000 
 retransmit-timer T4 5000 
 retransmit-timer TU1 5000 
 retransmit-timer TU2 32000 
 retransmit-timer clientTn 64000 
 retransmit-timer serverTn 64000 
 tcp connection-setup-timeout 1000 
 udp max-datagram-size 1500 
 end network
!
sip network Net-PSTN standard 
 no non-invite-provisional 
 allow-connections
 retransmit-count invite-client-transaction 3 
 retransmit-count invite-server-transaction 5
  retransmit-count non-invite-client-transaction 3 
 retransmit-timer T1 500 
 retransmit-timer T2 4000 
 retransmit-timer T4 5000 
 retransmit-timer TU1 5000 
 retransmit-timer TU2 32000 
 retransmit-timer clientTn 64000 
 retransmit-timer serverTn 64000 
 tcp connection-setup-timeout 1000 
 udp max-datagram-size 1500 
 end network
!
sip network Net-UC520 standard 
 no non-invite-provisional 
 allow-connections
 retransmit-count invite-client-transaction 3 
 retransmit-count invite-server-transaction 5 
 retransmit-count non-invite-client-transaction 3 
 retransmit-timer T1 500 
 retransmit-timer T2 4000 
 retransmit-timer T4 5000 
 retransmit-timer TU1 5000 
 retransmit-timer TU2 32000 
 retransmit-timer clientTn 64000 
 retransmit-timer serverTn 64000 
 tcp connection-setup-timeout 1000 
 udp max-datagram-size 1500 
 end network
!
sip overload reject retry-after 0 
sip peg-counting 2 86400 
sip privacy service 
sip queue message 
 drop-policy head 
 low-threshold 80 
 size 2000 
 thread-count 20 
 end queue
!
sip queue radius 
 drop-policy head 
 low-threshold 80 
 size 2000 
 thread-count 20 
 end queue
!
sip queue request 
 drop-policy head 
 low-threshold 80 
 size 2000 
 thread-count 20 
 end queue
!
sip queue response 
 drop-policy head 
 low-threshold 80 
 size 2000 
 thread-count 20 
 end queue
!
sip queue st-callback 
 drop-policy head 
 low-threshold 80 
 size 2000 
 thread-count 10 
 end queue
!
sip queue timer 
 drop-policy none 
 low-threshold 80 
 size 2500 
 thread-count 8 
 end queue
!
sip queue xcl 
 drop-policy head 
 low-threshold 80 
 size 2000 
 thread-count 2 
 end queue
!
route recursion 
!
sip tcp connection-timeout 30 
sip tcp max-connections 256 
!
no sip tls 
!
trigger condition TC-PSTN-to-UC520
 sequence 1 
  in-network ^\QNet-UC520\E$
  end sequence
 sequence 2 
  in-network ^\QNet-CUCM\E$
  end sequence
 end trigger condition
!
trigger condition TC-UC520-to-PSTN
 sequence 1 
  in-network ^\QNet-From-UC520\E$
  end sequence
 end trigger condition
!
trigger condition TC-from-CUCM
 sequence 1 
  in-network ^\QNet-CUCM\E$
  end sequence
 end trigger condition
!
trigger condition TC-from-PSTN
 sequence 1 
  in-network ^\QNet-PSTN\E$
  end sequence
 sequence 2 
  in-network ^\QNet-CUCM\E$
  message request
  end sequence
 end trigger condition
!
trigger condition mid-dialog
 sequence 1 
  mid-dialog 
  end sequence
 end trigger condition
!
accounting
 no enable 
 no client-side 
 no server-side 
 end accounting
!
server-group sip group SG-CUCM.ajeet.com Net-CUCM 
 element ip-address 14.128.64.191 5060 udp q-value 1 weight 50
  element ip-address 14.128.64.192 5060 udp q-value 1.0 weight 100
  failover-resp-codes 503
 lbtype global
 ping
 end server-group
!
server-group sip group SG-PSTN Net-PSTN 
 element ip-address 14.128.100.150 5060 udp q-value 1.0 weight 0
  failover-resp-codes 503
 lbtype global
 ping
 end server-group
!
server-group sip group SG-UC520 Net-UC520 
 element ip-address 14.128.100.161 5060 udp q-value 1.0 weight 0 
 failover-resp-codes 503
 lbtype global
 ping
 end server-group
!
route group RG-UC520 
 element target-destination SG-UC520 Net-UC520 q-value 1.0 
  failover-codes 502 - 503 
  weight 0 
  end element
 end route
!
route group RG-UC520-to-PSTN 
 element target-destination 14.128.100.150 Net-From-UC520 q-value 1.0 
  failover-codes 502 - 503 
  weight 0 
  end element
 end route
!
route table RT-CUCM 
 key 1111 target-destination SG-CUCM.ajeet.com Net-CUCM
 end route table
!
route table RT-PSTN 
 key 4082022222 target-destination SG-PSTN Net-PSTN
 end route table
!
route table RT-UC520 
 key 2222 group RG-UC520
 end route table
!
route table RT-UC520-PSTN 
 key 3333 group RG-UC520-to-PSTN
 end route table
!
policy normalization CUCM-Prefix-408
 uri-component update request-uri user 2022222 4082022222
 end policy
!
policy normalization UC520-Four-to-Full
 uri-component update request-uri user 4444 85224044444
 end policy
!
policy lookup Policy-UC520
 sequence 100 RT-UC520 request-uri uri-component user
  modify-key 400[12] 2222
  rule exact
  end sequence
 end policy
!
policy lookup Policy-UC520-to-PSTN
 sequence 100 RT-UC520-PSTN request-uri uri-component user
  modify-key 4444 3333
  rule exact
  end sequence
 end policy
!
policy lookup Policy-to-CUCM
 sequence 100 RT-CUCM request-uri uri-component user
  modify-key 4082022102 1111
  rule exact
  end sequence
 end policy
!
policy lookup Policy-to-PSTN
 sequence 100 RT-PSTN request-uri uri-component user
  rule exact
  end sequence
 end policy
!
trigger routing sequence 1 policy Policy-to-CUCM condition 
TC-from-PSTN 
trigger routing sequence 2 policy Policy-to-PSTN condition 
TC-from-CUCM 
trigger routing sequence 3 policy Policy-UC520 condition 
TC-PSTN-to-UC520 
trigger routing sequence 4 policy Policy-UC520-to-PSTN condition 
TC-UC520-to-PSTN 
trigger pre-normalization sequence 1 policy CUCM-Prefix-408 
condition TC-from-CUCM 
trigger post-normalization sequence 1 policy UC520-Four-to-Full
condition TC-UC520-to-PSTN 
!
server-group sip ping-options Net-CUCM 14.128.100.169 4001 
 method OPTIONS
 ping-type proactive 2500
 timeout 2000
 end ping
!
server-group sip global-ping 
sip cac session-timeout 720 
sip cac Net-CUCM 14.128.64.191 5060 udp limit -1 
sip cac Net-CUCM 14.128.64.192 5060 udp limit -1 
sip cac Net-PSTN 14.128.100.150 5060 udp limit -1 
sip cac Net-UC520 14.128.100.161 5060 udp limit -1 
!
no sip cac 
!
sip listen Net-CUCM udp 14.128.100.169 5061 
sip listen Net-From-UC520 udp 14.128.100.169 5063 
sip listen Net-PSTN udp 14.128.100.169 5060 
sip listen Net-UC520 udp 14.128.100.169 5062 
!
call-rate-limit 200
!
end
ajeesing-cusp-8.5.3(cusp)#

Verificación

Actualmente, no hay un procedimiento de verificación disponible para esta configuración.

Troubleshooting

Actualmente, no hay información específica de troubleshooting disponible para esta configuración.

Información Relacionada

Historial de revisiones

Revisión Fecha de publicación Comentarios
1.0
06-Aug-2013
Versión inicial
TAC Authored

Con la colaboración de ingenieros de Cisco

  • Ajeet Singh
    Cisco TAC Engineer.

¿Resultó útil este documento?

FeedbackComentarios

Contacte a Cisco