|
The following hot jobs are critical needs for Cisco. Come make an immediate
impact on the way Cisco is changing the way we work, live, play and learn.
Cisco Hot Jobs is updated bi-monthly.
Software Engineer
Help design, develop, test and document Router software, tools, applications
and/or engineering releases in support of the total design effort. A technical
mentor will be assigned to optimize productivity and learning.
Requires:
- BSEE/BSCS and 0-2 years experience, MSEE or MSCS preferred
- Experience with C and UNIX
- Knowledge of routing protocols (TCP/IP, AppleTalk, X.25, SNA/SDLC,
NETBIOS,
- Vines, DECnet, SNMP, Novell LAN/WAN, ATM )
- To work under direct general supervision
- To handle complex projects
- To solve problems with solutions based on diverse procedures and precedents
- To work in a team environment on multiple development or release and
test projects
- To communicate effectively
Locations: Research Triangle Park, North Carolina; San Jose, California;
Chelmsford, Massachusetts
Top of Page
Hardware Engineer
Help develop and provide manufacturing with engineering specifications,
hardware design, PC layout, testing and release specifications for board
level internetworking products. A technical mentor will be assigned to
optimize productivity and learning.
Requires:
- BSEE or equivalent and 0-2 years related experience, MSEE with LAN/WAN
product design experience preferred
- Experience with 68K CPU design, High Speed Logic, and Viewlogic
- Experience with schematic capture and board level layout tools
- Networking knowledge
- To work under direct general supervision
- To handle complex projects
- To solve problems with solutions based on diverse procedures and precedents
- To work in a team environment on multiple development or release and
test projects To communicate effectively
Locations: Research Triangle Park, North Carolina; San Jose, California;
Chelmsford, Massachusetts
Top of Page
Test Engineer
Help install and maintain test equipment; write, document and maintain
test software and procedures; provide software and hardware technical
support to customer support groups; design engineering, manufacturing,
customer sites, and production in support of failure analysis and linestop
resolution; design and/or generate specification and prototype custom
test equipment per product test and repair requirements; document and
manage additional equipment builds. A technical mentor will be assigned
to optimize productivity and learning.
Requires:
- BSEE/EET or equivalent and 0-2 years experience
- Basic knowledge of test equipment (Logic analyzer, O-scope, Digital
O-scope)
- Basic knowledge of network mediums (Ethernet, token ring, FDDI)
- Basic computer skills (Excel, word processing)
- Understanding of UNIX, C, and Assembly (Motorola)
- To work under direct general supervision and take direction from IS
management
- To handle complex projects
- To solve problems with solutions based on diverse procedures and precedents
- To work in a team environment
- To communicate effectively
Locations: San Jose, California
Top of Page
Customer Support Engineer
Help troubleshoot customers' networking problems and design issues via
phone consultation (approx. 2-3 hours per day); conduct lab research/simulation,
code review and protocol analysis. A technical mentor will be assigned
to optimize productivity and learning.
Requires:
- BSEE, BSCS, BSCE or equivalent with strong emphasis in networking
theory
- Knowledge of X-Windows, C programming, and UNIX
- Understanding of low level protocols
- LAN/WAN networking experience
- To work under direct general supervision
- To handle complex projects
- To solve problems with solutions based on diverse procedures and precedents
- To work in a team environment
- To communicate effectively
- Ability to handle multiple projects simultaneously
Locations: Research Triangle Park, North Carolina; San Jose, California
Top of Page
I.T. Engineer
Help develop programs/reports in support of all groups within your department;
answer application questions; research database and application issues;
report to users and IS Management; work with Customer Service, Customer
Support Engineering, and Service Operations users on a daily basis for
application support.
Requires:
- BSCS degree and 0-2 years related experience
- Ability to maneuver within a UNIX environment (HP/UX preferred)
- Understanding of relational database concepts
- Understanding of System Development Life Cycle
- Experience with Oracle DB and CDE toolsets
- Familiarity with structured programming
- Ability to understand user requirements and deliver a quality product
based on those requirements
- To work under direct general supervision
- To handle complex projects.
- To solve problems with solutions based on diverse procedures and precedents
- To work in a team environment
- To communicate effectively
Locations: San Jose, California
Top of Page
I.T. Analyst
Become a member of a team that supports a functional organization within
the Information Systems division. Assignments will grow in complexity
and risk as you learn more about the applications, user processes and
develop your technical skills. Initially, you will spend time learning
the intricacies of the business and applications. Projects are oriented
toward improved productivity, better business controls and supporting
the manufacturing strategic direction. The main business application are
Oracle based applications in a Unix client/server environment. We have
many bolt-on applications adding functionality. Projects will expose you
to the business users and technical coding. Assignments will have business
impact and deploy the latest technology.
Requires:
- BS degree in CS or MIS
- Outgoing personality
- Record of delivery on projects, assignments
- Good communication skills
- Technical expertise and quick study Locations: San Jose, California
Top of Page
Unix Systems Administrator
Requires Unix Systems Administration experience (0 - 2 years) in at least
one of the following Unix: Sun or HP. Experience must be concurrent and
include basic working knowledge of Unix, sendmail, printing, DNS, network
configuration on local hosts, NFS, plus shell programming experience in
ksh, csh or Bourne (C or Perl a big plus). Knowledge of basic Unix permissions
also required.
Report directly to the Sys Admin manager and focus approximately 50%
of time in support of basic corporate Unix service (printing, email, etc.)
and approximately 50% of time in support of internal application development.
Interact closely with Operations Data Center, personnel vendors, peer
Sys Admin and DBA groups. Provides a tremendous opportunity to work closely
with Cisco's well known Internet Sys Admins.
Locations: San Jose, California
Top of Page
Mechanical Engineer
Help plan and execute the design and development of system packaging for
high volume, low cost computer or network/WAN products; design computer
enclosures and related electromechanical assemblies using solid modeling
techniques; consult with in-house engineers to ensure product design and
marketing requirements will be met; manage mechanical design projects
with outside design resources; perform/coordinate design verification
testing of new products; perform board and system level thermal and structural
analysis; work with other engineers to select electromechanical components
including air movers, connectors, fasteners, form factors, raw materials
and manufacturing processes.
Requires:
- BSME or equivalent and 0-2 years related experience
- Working knowledge of a solids-based mechanical CAD system
- Working knowledge of fluid flow and/or structural analysis software
tools
- Experience using applications in a UNIX/open systems environment
- The ability to work in a concurrent engineering, product team environment
- To work under direct general supervision
- To handle complex projects.
- To solve problems with solutions based on diverse procedures and precedents
- To communicate effectively
Locations: San Jose, California
Top of Page
Buyer/Planner
Responsible for ordering, planning, and buying for product line/s. Manage
supplier relationships. Participate in new product introduction. Manage
PCBA Procurement in a high volume, continuous flow environment.
Requires:
- BA/BS in related discipline
- 0-2 years business experience
- Experience with buying/planning preferred.
- To communicate effectively
Locations: San Jose, California
Top of Page
Financial Analyst
Act as liaison and financial/business partner with Cisco Business Units.
Complete standard margin analysis by product and Business Unit, company
gross margin analysis, actual vs. budget analysis and commentaries and
management schedules on a monthly basis. Prepare detailed standard cost
by product analyses/summaries in support of the quarterly standards update
process. Participate in all apects of the bi-annual budget/monthly forecast
for product gross margin.
Requires:
- MBA in Accounting, Finance, or Business
- Cost Accounting and/or analytical experience in a high-technology
repetitive manufacturing environment
- Ability to perform numerical analyses, and to translate that analysis
into narrative form
- Strong technical skills relating to financial information and internal
and external accounting rules
- Proficient spreadsheet skills (Excel)
- Prefer experience in business systems/automation projects
- Prefer experience with Oracle, Pillar, and Macintosh
Locations: San Jose, California
Top of Page
Cost Accountant
Perform routine accounting reconsiliations, routine reporting, and detailed
analysis. Maintain database, implement process improvements, and perform
asset verification.
Requires:
- BA in Accounting, Finance, or Business
- Experience with Macintosh, Apple Share, and Excel
- Prefer experience in cost accounting, work order management, and/or
inventory control procedures
- Prefer experience with Oracle Manufacturing and/or Metrix Service
Inventory system experience
Locations: San Jose, California
Top of Page
New Product Introduction
Engineer
Responsible for the technical coordination of new product releases between
design and manufacturing. Provide technical guidance for manufacturability
and testability of PC board assemblies, ASIC's and interconnect products.
Test, debug, and troubleshoot prototypes. Create and maintain new product
documentation packages. Train Cisco and vendor personel on new products.
Interface and support a wide variety of client groups within manufacturing,
engineering, test, and service.
Requires:
- BSEE degree
- Excellent communication skills
- MSEE or MBA preferred
Locations: San Jose, California
Top of Page
Process Engineer
Responsible for developing manufacturing processes for new product introductions
into a specific cell. Design/Plan cell layouts and organize cell moves/fit-ups.
Purchase tools/equipment. Conduct capacity studies and make recommendations
to manager. Carry out continuous improvement plans including plans for
process/product quality assurance, cost reduction and inventory accuracy.
Requires:
- A minimum of BS in Industrial Engineering
- Excellent communication skills
Locations: San Jose, California
Top of Page
Associate Systems Engineer
As an Associate SE, you will be providing technical support to Cisco
customers. In this support capacity you will: help design Cisco networks;
assist customers with initial configuration of Cisco products; create
configurations based on engineering designs; provide emergency support
to Customer Engineering, Management and sales teams; set up equipment
for demonstrations to existing and prospective customers and sales teams.
Throughout these activities you will be assisted by a technical mentor
assigned to optimize productivity and learning.
Prefer BS or MS (EE/ECE/Telecommunications/or CS) degrees. The following
degrees will be considered: Information Systems, Math, and Business. A
GPA of 3.0 or better and strong written and verbal communication skills
is required. Dean's list is a Plus. Knowledge of TCP/IP or other networking
protocol is a plus. Strong understanding pf and hands on experience with
networking technology such as routers, switches, hubs, and ATM a big plus.
Should be PC, Computer and Internet literate. Ability to understand complex
technical issues and apply technical solutions is desired. Ability to
speak to a group is a plus.
As an Associate SE, you will spend 12-14 weeks at corporate headquarters
in a training program helping you accomplish the following. You will be
expected to develop knowledge of routing and routed protocols, Intranet
and solutions for the campus and WAN through classroom and on-the-job
training. You will learn to provide technical assistance to systems engineers
on their accounts. Accurately create product configurations and assist
account managers in the preparation of quotations. You will work in a
team environment. Learn to deliver presentations to the client on Cisco's
products.
Top of Page
Associate Sales Representative
As an Associate Sales Representative, you will be joining
one of the most dynamic corporations in America---Cisco Systems. Ranked
#3 by Fortune magazine as one of the best companies to work for, Cisco
Systems offers recent college graduates the opportunity to join Inside
Sales in Research Triangle Park, NC. The Associate Sales Representative
Program will provide those who have an enthusiasm for learning in the
high-tech arena of networking and a desire to enter corporate sales, a
comprehensive training program in a two to three year time frame. This
is an aggressive and demanding "hands-on" program that provides
basic, intermediate, and advanced technical and sales skills training.
Specifically, the Associate Sales Representatives will begin their career
in the sales development area where they will use customized criteria
on scripted telephone calls to identify specific business opportunities.
This process will enable the ASR to develop basic professional
sales development skills while providing high-quality, revenue-generating
leads to the Americas (or US) Sales Force. Following the demanding and
rewarding track in Sales Development, the ASRs will be promoted to an
inside sales representative role where they will be given a specific territory
and quota. This will help them to enhance an already robust skills set.
After successful completion of the sales development and inside sales
representative portions of the program, the ASR will be promoted to an
outside sales representative position and will return to his/her designated
geographic area as a contributing member of the area account team
Requires a BA or BS degree or higher. A 3.0 (on a 4.0 scale) and higher
is a must.
Should be PC and Internet literate. Strong written and verbal communication
skills are required. Willingness to relocate for 2-3 years to N.C is
required. Involvement in community and college activities is essential,
as well as memberships in career and community related organizations.
Teamwork Skills, the ability to understand complex issues and apply business
solutions, and the ability to speak to a group are essential. Sales knowledge
a plus. Knowledge of networking is a plus.
Top of Page
|