To display current or historical status and related information on redundant Dial Shelf Controller (DSC), use the show redundancy privileged EXEC console command.
show redundancy [history]|
history |
(Optional) This optional keyword displays a log of past status and related information on the redundant DSCs. |
This command is issued on a per use basis.
Privileged EXEC
The following is an example output of the show redundancy command:
Router# show redundancy
DSC in slot 12:
Hub is in 'active' state.
Clock is in 'active' state.
DSC in slot 13:
Hub is in 'backup' state.
Clock is in 'backup' state.
Router#
The following is an example output of the show redundancy history command:
Router# show redundancy
history
DSC Redundancy Status Change History:
981130 18:56 Slot 12 DSC: Hub, becoming active - RS instruction
| Command | Description |
|---|---|
|
hw-module |
Enables the router shelf to stop a DSC or to restart a stopped DSC. |
|
debug redundancy |
Displays information used for troubleshooting dual (redundant) DSC cards. |