Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports
Specifications Overview
|
|
Alternate PIDs
Document Types
Configuration Guides
- Access the PAP2T Web-Based Setup Page
- Accessing the PAP2T Phone Adapter using IVRS for configuration of IP Address
- Basic Audio Configuration settings on Cisco PAP2T Phone Adapter
- Basic Miscellaneous Settings on PAP2T Phone Adapter
- Basic SIP Settings on the PAP2T Phone Adapter
- Basic System Information on the PAP2T Phone Adapter
- Configuration of Call Forward on the PAP2T and SPA3102 Phone Adapters
- Configuration of Ring Settings on the PAP2T and SPA3102
- Configuration of Selective Call Forward on the PAP2T and SPA3102 Phone Adapters
- Configuration of Session Initiation Protocol (SIP) Proxy and Registration on PAP2T
- Configuration of Subscriber Information on PAP2T
- Configure System Settings on PAP2T Phone Adapter
- Configuring SIP Settings Provision on PAP2T Phone Adapter
- Control Timer Values on PAP2T Phone Adapter
- Dial Plan on PAP2T Phone Adapter
- Distinctive Ring Settings on PAP2T
- Factory Reset on PAP2T Phone Adapter using Interactive Voice Response System (IVRS)
- Foreign Exchange Station (FXS) Port Polarity Configuration on PAP2T and SPA3102 Phone Adapters
- Internet Connection Type on PAP2T Phone Adapter
- Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
- Network Address Translation (NAT) Support Parameters on PAP2T Phone Adapter
- Network Settings for Lines on PAP2T Phone Adapter
- Optional Network Configuration on PAP2T Phone Adapter
- Product Information on the PAP2T Phone Adapter
- Regional Miscellaneous Settings on PAP2T Phone Adapter
- Response Status Code Handling on PAP2T Phone Adapter
- RTP Parameters on PAP2T Phone Adapter
- SDP Payload Types on PAP2T Phone Adapter
- Speed Dial Settings on PAP2T Phone Adapter
- Supplementary Service Settings for Users on PAP2T Phone Adapter
- Supplementary Service Subscription on PAP2T Phone Adapter
- System Configuration on PAP2T Phone Adapter
- System Status Information on PAP2T Phone Adapter
- Troubleshoot Access to PAP2T Phone Adapter
- Troubleshoot Make/Receive Calls on PAP2T Phone Adapter
- Vertical Service Activation Codes on PAP2T Phone Adapter
- Basic Audio Configuration settings on Cisco PAP2T Phone Adapter
- Configuration of Basic and Advance WAN PPPoE on the SPA2102 and SPA3102 Phone Adapter
- Configuration of Call Feature Settings on the SPA3102
- Configuration of Call Forward on the PAP2T and SPA3102 Phone Adapters
- Configuration of Local Area Network (LAN) Network Settings on the SPA3102
- Configuration of Ring Settings on the PAP2T and SPA3102
- Configuration of Selective Call Forward on the PAP2T and SPA3102 Phone Adapters
- Configuration of WAN Static IP on the SPA2102 and SPA3102 Phone Adapter
- Configure DDNS Settings On SPA2102 or SPA3102 Phone Adapter
- Configure NAT with STUN on SPA3102 Phone Adapters
- Configure System Settings on PAP2T Phone Adapter
- DMZ Settings on SPA2102 and SPA3102
- Firmware Upgrade on SPA2102 and SPA3102 Phone Adapter
- Foreign Exchange Station (FXS) Port Polarity Configuration on PAP2T and SPA3102 Phone Adapters
- Forward All Calls On a SPA2102 and SPA3102 Phone Adapter
- Network Address Translation (NAT) Settings for Lines on PAP2T and SPA3102 Phone Adapters
- Response Status Code Handling on the SPA2102 and SPA3102 Phone Adapter
- RTP Parameters on the SPA2102 and SPA3102 Phone Adapter
- SIP Parameters on the SPA2102 or SPA3102 Phone Adapter
- SIP Timer Values on the SPA2102 and SPA3102 Phone Adapter
- System Configuration and Miscellaneous Settings on the SPA3102
- Troubleshoot the Factory Reset on the SPA3102
Data Sheets
- Cisco SPA3102 Phone Adapter with Router
- Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports
- Cisco SPA2102 Phone Adapter with Router
End-of-Life and End-of-Sale Notices
- End-of-Sale and End-of-Life Announcement for the Cisco PAP2T Internet Phone Adapter with 2 VoIP Ports
- End-of-Sale and End-of-Life Announcement for the Cisco SPA2102 Phone Adapter with Router
Install and Upgrade Guides^ Back to Top
- Linksys PAP2T Internet Phone Adapter Quick Installation Guide
- Cisco SPA100 Series Phone Adapters Quick Start Guide
- Regulatory Compliance and Safety Information for Cisco SPA112 and Cisco SPA122 Analog Telephone Adapters
- Cisco SPA2102 Phone Adapter with Router Quick Start Guide
- Cisco SPA3102 Voice Gateway with Router Quick Start Guide
- Cisco SPA8000 8-Port Telephony Gateway Quick Start Guide
- Cisco Small Business Pro SPA8800 Phone Adapter with Router Quick Start Guide
- Regulatory Compliance and Safety Information for the the Cisco SPA8800 Analog Telephone Adapter with Router
- Cisco Small Business WRP400 Quick Start Guide
- Regulatory Compliance and Safety Information for the Cisco WRP400 Wireless-G Broadband Routerwith 2 Phone Ports
Q&As^ Back to Top
- Accessing the PAP2 Remotely
- Accessing the PAP2's Web-Based Setup Page
- Configuring IP Dialing on the PAP2
- Encountering Difficulties Sending Fax
- Encountering Difficulty with the Phone not Ringing Although able to Make a Phone Call
- Experiencing Choppy Sound when Using the PAP2
- Identifying the Difference Between the PAP2 v1 and PAP v2
- Resetting SPA2100
- Resetting the SPA2002
- Resolving Caller ID Feature not Working
- Running a Syslog on SPA Devices
- Set up a PAP2 Behind a Cisco Small Business Router
- Setting-Up Call Forwarding on the PAP2
- Setting-Up the PAP2
- Taking a Long Time to Hear the Ringtone Using a PAP2
- Troubleshooting SPA Device: faq
- Using the PAP2 with Two Simultaneous Channel Usage of a G.729 Codec
- Access the Web-Based Setup Page of the VoIP Router
- Accessing the SPA2100's Interactive Voice Response (IVR) Menu.
- Accessing the SPA2100's Web-Based Setup Page
- Cascade (Connect) a Cisco Small Business Router to a VoIP Router
- Change the Cisco Small Business VoIP Router Password
- Change the VoIP Router's LAN IP Address
- Change the Wireless Channel on a Cisco Small Business VoIP Router
- Change the Wireless Network Name (SSID) on a Cisco Small Business VoIP Router.
- Check Phone Registration Status on the Cisco Small Business VoIP Router
- Check the Cisco Small Business VoIP Router IP Address
- Check the Wireless Settings on a Cisco Small Business VoIP Router
- Connect a Wired Computer to a Cisco Small Business VoIP Router
- Connect a Wireless Adapter to a Cisco Small Business VoIP Router
- Connect a Wireless Computer to a Cisco Small Business VoIP Router
- Connect Devices Together on a Cisco Small Business VoIP Router
- Connecting Phone Extensions to SPA2100
- Disable SSID Broadcast on a Cisco Small Business VoIP Router
- Enable Remote Management on a Cisco Small Business VoIP Router
- Enabling WAN Web Server on SPA2100
- Experiencing Unreliable T.38 Fax Connection Using an SPA2100
- HTTPS Based Remote Provisioning with the SPA2102, SPA3102, and SPA9000
- Identifying Devices that Support the T.38 Fax Protocol
- Identifying SPA model/s that Support T.38 Fax Protocol
- Implement Access Restrictions for Computers Behind a Small Business VOIP Router
- Observing Proper Power Cycle on the VOIP Gateway
- Resolving IP Conflict Between SPA2100 and an Existing Router
- Set up 128-Bit WEP Wireless Security on a Cisco Small Business VoIP Router
- Set up a Cisco Small Business VoIP Router Using DSL Internet Service
- Set up a Cisco Small Business VoIP Router with a Static IP Account
- Set up WPA Wireless Security on a Cisco Small Business VoIP Router
- Setting the SPA2100 to bridge mode
- Small Business VOIP Router: Choppy Line when Making a Call
- Small Business VOIP Router: Identify the Advanced Wireless Settings
- Small Business VOIP Router: Intermittent Wired Connections
- Small Business VOIP Router: Intermittent Wireless Connection
- Small Business VoIP Router: Poor or No Signal
- Small Business VoIP Router: Problems Making a Phone Call
- Small Business VOIP Router: Problems with Access to Some Websites
- Small Business VOIP Router: Problems with Connection to Online Servers
- Small Business VoIP Router: Problems with Connection to Secured Websites
- Small Business VOIP Router: Problems with Dial Tone
- Small Business VoIP Router: Problems with Sending and/or Receiving Emails
- Small Business VOIP Router: Reset to Factory Default
- SPA3102 Firmware Upgrade
- SPA Troubleshooting 56832 bytes attached
- Understanding the SPA2100's LED Blinking Pattern
- Accessing SPA3102 Interactive Voice Response (IVR) Menu
- Accessing the Interactive Voice Response Menu of the SPA3000
- Accessing the Setup Page of SPA3102
- Change the LAN IP Address on a Cisco SPA3102 Voice Gateway
- Disabling Call Waiting Features of SPA3102
- Enabling the Auto PSTN Fallback of the SPA3000
- Enabling the Remote Management Feature on the SPA3102
- Explaining Dial Plans for the SPA3000
- Forwarding PSTN Calls to a VOIP number on SPA3102
- Getting to Know Dial Plan Parameters
- Getting to Know the SPA3102
- Making an Outbound Call on SPA3102
- Making NodePhone Changes on the SPA3000
- Reducing the Echo on the PSTN line of SPA3102
- Set up an Xbox on a Cisco Small Business VOIP Router
- Set up Servers Behind a Cisco Small Business VOIP Router
- Set Up the SPA3000
- Set up the Wireless Settings on a Cisco Small Business VoIP Router
- Set up Wireless Security on a Cisco Small Business VOIP Router
- Setting the SPA3102 to Bridge Mode
- Setting-Up an NTP Server on SPA3102
- Setting-Up SPA3000 as a PSTN Gateway of SPA9000
- SPA3000 Configuration Example
- Understanding SIP Messages
- Upgrading the Firmware of SPA3102
- Access the Small Business Support Community
- Accessing the SPA2100's Interactive Voice Response (IVR) Menu
- Change the Wireless Network Name (SSID) on a Cisco Small Business VoIP Router
- Forwarding PSTN Calls to a VOIP number on SPA3102
- Set up a PlayStation 2 with a Cisco Small Business VoIP Router
- Small Business VOIP Router: Reset to Factory Default
Feedback
| 
