Голосовая связь и система унифицированных коммуникаций : ?????? ?????????? Cisco TelePresence (VCS)

Серия VCS или серия скоростной автомагистрали Xconfig и выходной набор Xstatus с PuTTY

5 апреля 2016 - Машинный перевод
Другие версии: PDF-версия:pdf | Отзыв

Введение

Этот документ описывает, как собрать выходные данные CLI xconfig и xstatus xcommands от Серии сервера Video Communication Server (VCS) и Устройств серии Скоростной автомагистрали, таких как Контроль VCS, Скоростная автомагистраль VCS, C скоростной автомагистрали и Скоростная-автомагистраль-E, что Центр технической поддержки Cisco (TAC) иногда должен получать.

Внесенный стеной Майкла Джейсона и Адамом Уомсли, специалистами службы технической поддержки Cisco.

Предварительные условия

Требования

Компания Cisco рекомендует предварительно ознакомиться со следующими предметами:

  • PuTTY или подобная Программа эмуляции терминала, такая как SecureCRT, Условие Tera, или подобный.
  • Имя пользователя и пароль учетной записи администратора к устройству серии VCS/Скоростной автомагистрали.
  • Кабель Последовательной консоли RJ45-D-Sub9pin или Secure Shell (SSH) разрешены в сетевом пути.

Используемые компоненты

Сведения, содержащиеся в данном документе, касаются следующих версий программного и аппаратного обеспечения:

  • PuTTY (Посещают Страницу разгрузки PuTTY для получения копии).
  • C VCS, который выполняет Версию 7.2.1, используется в данном примере, который применим через Версию 8.2.2, которая является последней версией в текущее время.

Настройка

Подключение консолью

Примечание: Эта статья предполагает, что у вас есть функциональный связанный консольный кабель физического серийного номера. Необходимо было получить один с устройством.

Вот пример параметров настройки, которые необходимо настроить для доступа последовательной консоли в PuTTY.

Примечание: Необходимо будет отрегулировать Связь (COM) порт на основе того, как у вас есть консоль, связанная с ПК.

  1. Перейдите к Конфигурации> Категория> Соединение> Последовательный и отрегулируйте Последовательные Параметры настройки как показано здесь:



  2. Перейдите к Категории> Сеанс, выберите тип Serial как тип соединения и нажмите Open как показано здесь:

Подключение через SSH

Более простая альтернатива к SSH в устройство.

  1. Используйте IP-адрес устройства VCS/Скоростной автомагистрали для регулировки параметров настройки в PuTTY как показано в данном примере:



  2. Или до или во время Сеанса PuTTY к устройству, необходимо установить Параметры настройки Регистрации. В заказе для этого переходят к Конфигурации> Категория> Сеанс> Регистрация и настраивают параметры настройки для соответствия, данный пример (отрегулируйте путь к файлу и имя файла для удовлетворения собственному ПК и потребностям):



  3. После того, как связанный и вошедший, экран, подобный этим показам. Войдите как admin, как обозначено здесь.



    Внимание.  : Поскольку это - лабораторная среда, сигналы тревоги могут быть проигнорированы. Если сигналы тревоги замечены в производственной среде, они должны быть обращены как можно скорее.



  4. Введите xstatus, дают команду и нажимают Enter:



    Вот выходные данные xstatus, которые появляются после нажатия Enter. Выходные данные прокрученное прошлое слишком быстро для просмотра до конца. Пока регистрация была настроена ранее, это будет в текстовом файле.



    Теперь, когда вы собрали выходные данные команды xstatus, вы готовы собрать выходные данные команды xconfig.

  5. Введите xconfig, дают команду и нажимают Enter.




    Вот пример выходных данных xconfig после нажатия Enter. Выходные данные прокрученное прошлое слишком быстро для просмотра до конца. Пока регистрация была настроена ранее, это будет в текстовом файле.


VCS и Серия Скоростной автомагистрали x8.2

Когда журнал диагностики взят, в выпуске ПО x8.2 теперь включены xconfiguration и xstatus.

  1. Перейдите к> Diagnostics Обслуживания> Диагностическая регистрация.

  2. Выберите Start новый журнал и затем сразу Прекратите регистрировать.

    Примечание: Этот метод также содержит loggingsnapshot.txt, который регистрирует сообщения в ответ на действия, которые имеют место на VCS или Серии Скоростной автомагистрали в то время.



    Загруженный архив журнала диагностики содержит эти файлы:

    • loggingsnapshot.txt - Содержит сообщения журнала в ответ на действия, выполненные в течение периода регистрации.

    • xconf_dump.txt - Содержит информацию о конфигурации системы в это время регистрация был запущен.

    • xstat_dump.txt - Содержит информацию о статусе системы в это время регистрация был запущен.

    • (при необходимости) diagnostic_logging_tcpdump.pcap - Содержит пакеты, перехваченные в течение периода регистрации.

Проверка.

Вот пример того, на что выходные данные xstatus и xconfig похожи в текстовом файле, сохраненном с параметрами настройки регистрации:

xstatus

*s SystemUnit:
    Product: "TANDBERG VCS"
    Uptime: 24963390
    SystemTime: "2014-06-19 14:58:59"
    TimeZone: "US/Eastern"
    LocalTime: "2014-06-19 10:58:59"
    Software:
      Version: "X7.2.1"
      Build: "296181"
      Name: "s42700"
      ReleaseDate: "2012-09-25"
      ReleaseKey: "****************"
      Configuration:
        NonTraversalCalls: 500
        TraversalCalls: 200
        Registrations: 2500
        Expressway: False
        Encryption: True
        Interworking: True
        FindMe: True
        DeviceProvisioning: True
        DualNetworkInterfaces: False
        AdvancedAccountSecurity: False
        StarterPack: False
        EnhancedOCSCollaboration: True
    Hardware:
      Version: "VMWare"
      SerialNumber: "********"
*s/end

*s Ethernet 1:
    MacAddress: "00:50:56:A1:70:06"
    Speed: 10000full
    IPv4:
      Address: "10.10.10.10"
      SubnetMask: "255.255.255.0"
*s/end

*s Ethernet 2:
    MacAddress: "00:50:56:A1:70:04"
    Speed: 10000full
    IPv4:
      Address: "192.168.0.100"
      SubnetMask: "255.255.255.0"
*s/end

*s Options:
    Option 1:
      Key: "116341X300-1-!!!!!!!!"
      Description: "300 Non-traversal Calls"
    Option 2:
      Key: "116341P00-1-!!!!!!!!"
      Description: "Device Provisioning"
    Option 3:
      Key: "116341G00-1-!!!!!!!!!"
      Description: "H323-SIP Interworking Gateway"
    Option 4:
      Key: "116341U00-1-!!!!!!!!!"
      Description: "FindMe"
    Option 5:
      Key: "116341C00-1-!!!!!!!!!"
      Description: "Enhanced OCS Collaboration"
    Option 8:
      Key: "116341Y200-1-!!!!!!!!"
      Description: "200 Traversal Calls"
    Option 9:
      Key: "116341X200-1-!!!!!!!!"
      Description: "200 Non-traversal Calls"
*s/end

*s IP:
    Protocol: IPv4
    IPv4:
      Gateway: "10.10.10.1"
*s/end

*s ExternalManager:
    Status: Active
    Address: "10.10.10.104"
    Protocol: HTTP
    URL: "tms/public/external/management/systemmanagementservice.asmx"
*s/end

*s Feedback 1:
    Status: Off
*s/end

*s Feedback 2:
    Status: Off
*s/end

*s Feedback 3:
    Status: On
    URL: "http://10.10.10.104/tms/public/feedback/code.aspx"
    Expression: "/Event/CallDisconnected"
    Expression: "/Event/CallConnected"
    Expression: "/Event/CallFailure"
    Expression: "/Event/RegistrationAdded"
    Expression: "/Event/RegistrationChanged"
    Expression: "/Event/ResourceUsage"
    Expression: "/Event/AuthenticationFailure"
    Expression: "/Status/Warnings"
*s/end

*s ResourceUsage:
    Calls:
      Traversal:
        Current: 0
        Max: 0
        Total: 0
      NonTraversal:
        Current: 0
        Max: 1
        Total: 2
    Registrations:
      Current: 0
      Max: 3
      Total: 42
*s/end

*s Calls: /
*s/end

*s Zones:
    DefaultZone:
      Name: "DefaultZone"
      Bandwidth:
        LocalUsage: 0
        ClusterUsage: 0
    LocalZone:
      DefaultSubZone:
        Name: "DefaultSubZone"
        Bandwidth:
          LocalUsage: 0
          ClusterUsage: 0
      TraversalSubZone:
        Name: "TraversalSubZone"
        Bandwidth:
          LocalUsage: 0
          ClusterUsage: 0
      ClusterSubZone:
        Name: "ClusterSubZone"
        Bandwidth:
          LocalUsage: 0
          ClusterUsage: 0
    Searches:
      Current: 0
      CurrentDirected: 0
      Total: 64081
      Dropped: 0
      MaxSubSearchExceeded: 0
      MaxTargetsExceeded: 0
    Zone 1:
      Name: "TraversalZone"
      Bandwidth:
        LocalUsage: 0
        ClusterUsage: 0
      Status: Active
      Type: TraversalClient
      TraversalClient:
        Peer 1:
          H323:
            Status: Active
            Address: "10.10.10.102"
            Port: 6001
            LastStatusChange: "2014-04-03 09:50:35"
          SIP:
            Status: Active
            Address: "10.10.10.102"
            Port: 7001
            LastStatusChange: "2014-04-03 09:49:13"
            Server: "TANDBERG/4102 (X7.0)"
*s/end

*s Alternates: /
*s/end

*s Links:
    Link 1:
      Name: "DefaultSZtoTraversalSZ"
      Bandwidth:
        LocalUsage: 0
        ClusterUsage: 0
    Link 2:
      Name: "DefaultSZtoDefaultZ"
      Bandwidth:
        LocalUsage: 0
        ClusterUsage: 0
    Link 3:
      Name: "DefaultSZtoClusterSZ"
      Bandwidth:
        LocalUsage: 0
        ClusterUsage: 0
    Link 4:
      Name: "TraversalSZtoDefaultZ"
      Bandwidth:
        LocalUsage: 0
        ClusterUsage: 0
    Link 5:
      Name: "Zone001ToTraversalSZ"
      Bandwidth:
        LocalUsage: 0
        ClusterUsage: 0
*s/end

*s Pipes: /
*s/end

*s Registrations: /
*s/end

*s SIP:
    Ethernet 1:
      IPv4:
        UDP:
          Status: Inactive
        TCP:
          Status: Active
          Address: "10.10.10.10:5060"
        TLS:
          Status: Active
          Address: "10.10.10.10:5061"
      IPv6:
        UDP:
          Status: Inactive
        TCP:
          Status: Inactive
        TLS:
          Status: Inactive
    Ethernet 2:
      IPv4:
        UDP:
          Status: Inactive
        TCP:
          Status: Inactive
        TLS:
          Status: Inactive
      IPv6:
        UDP:
          Status: Inactive
        TCP:
          Status: Inactive
        TLS:
          Status: Inactive
    Transport:
      Server 19857:
        Socket:
          Type: "SERV_UDP"
          State: "INUSE"
          ID:
            Local: 85393
            Global: 0
          Buffer:
            Input:
              Length: 20000
            Output:
              Length: 20000
        Local:
          Address: "127.0.0.1:5060"
        Remote:
          Address: ""
        Network:
          Number: 1
        Certificate:
          Subject:
            Name: ""
        TLS:
          Cipher:
            Name: ""
        Last:
          Packet:
            Received: 0
        Close:
          In: 20
        Secure: False
        X509:
          Certificate:
            Verified: False
        Queue:
          Max:
            Size: 0
          Add:
            Failures: 0
        Flow:
          Token: ""
      Server 19856:
        Socket:
          Type: "SERV_TCP"
          State: "INUSE"
          ID:
            Local: 150928
            Global: 1
          Buffer:
            Input:
              Length: 0
            Output:
              Length: 0
        Local:
          Address: "127.0.0.1:5060"
        Remote:
          Address: ""
        Network:
          Number: 1
        Certificate:
          Subject:
            Name: ""
        TLS:
          Cipher:
            Name: ""
        Last:
          Packet:
            Received: 0
        Close:
          In: 20
        Secure: False
        X509:
          Certificate:
            Verified: False
        Queue:
          Max:
            Size: 0
          Add:
            Failures: 0
        Flow:
          Token: ""
      Server 19855:
        Socket:
          Type: "SERV_TLS"
          State: "INUSE"
          ID:
            Local: 216463
            Global: 2
          Buffer:
            Input:
              Length: 0
            Output:
              Length: 0
        Local:
          Address: "127.0.0.1:5061"
        Remote:
          Address: ""
        Network:
          Number: 1
        Certificate:
          Subject:
            Name: ""
        TLS:
          Cipher:
            Name: ""
        Last:
          Packet:
            Received: 0
        Close:
          In: 20
        Secure: True
        X509:
          Certificate:
            Verified: False
        Queue:
          Max:
            Size: 0
          Add:
            Failures: 0
        Flow:
          Token: ""
      Server 19854:
        Socket:
          Type: "SERV_UDP"
          State: "INUSE"
          ID:
            Local: 281998
            Global: 3
          Buffer:
            Input:
              Length: 20000
            Output:
              Length: 20000
        Local:
          Address: "[::1]:5060"
        Remote:
          Address: ""
        Network:
          Number: 1
        Certificate:
          Subject:
            Name: ""
        TLS:
          Cipher:
            Name: ""
        Last:
          Packet:
            Received: 0
        Close:
          In: 20
        Secure: False
        X509:
          Certificate:
            Verified: False
        Queue:
          Max:
            Size: 0
          Add:
            Failures: 0
        Flow:
          Token: ""
      Server 19853:
        Socket:
          Type: "SERV_TCP"
          State: "INUSE"
          ID:
            Local: 347533
            Global: 4
          Buffer:
            Input:
              Length: 0
            Output:
              Length: 0
        Local:
          Address: "[::1]:5060"
        Remote:
          Address: ""
        Network:
          Number: 1
        Certificate:
          Subject:
            Name: ""
        TLS:
          Cipher:
            Name: ""
        Last:
          Packet:
            Received: 0
        Close:
          In: 20
        Secure: False
        X509:
          Certificate:
            Verified: False
        Queue:
          Max:
            Size: 0
          Add:
            Failures: 0
        Flow:
          Token: ""
      Server 19852:
        Socket:
          Type: "SERV_TLS"
          State: "INUSE"
          ID:
            Local: 413068
            Global: 5
          Buffer:
            Input:
              Length: 0
            Output:
              Length: 0
        Local:
          Address: "[::1]:5061"
        Remote:
          Address: ""
        Network:
          Number: 1
        Certificate:
          Subject:
            Name: ""
        TLS:
          Cipher:
            Name: ""
        Last:
          Packet:
            Received: 0
        Close:
          In: 20
        Secure: True
        X509:
          Certificate:
            Verified: False
        Queue:
          Max:
            Size: 0
          Add:
            Failures: 0
        Flow:
          Token: ""
      Server 19851:
        Socket:
          Type: "SERV_TCP"
          State: "INUSE"
          ID:
            Local: 478603
            Global: 6
          Buffer:
            Input:
              Length: 0
            Output:
              Length: 0
        Local:
          Address: "10.10.10.10:5060"
        Remote:
          Address: ""
        Network:
          Number: 2
        Certificate:
          Subject:
            Name: ""
        TLS:
          Cipher:
            Name: ""
        Last:
          Packet:
            Received: 0
        Close:
          In: 20
        Secure: False
        X509:
          Certificate:
            Verified: False
        Queue:
          Max:
            Size: 0
          Add:
            Failures: 0
        Flow:
          Token: ""
      Server 19850:
        Socket:
          Type: "SERV_TLS"
          State: "INUSE"
          ID:
            Local: 544138
            Global: 7
          Buffer:
            Input:
              Length: 0
            Output:
              Length: 0
        Local:
          Address: "10.10.10.10:5061"
        Remote:
          Address: ""
        Network:
          Number: 2
        Certificate:
          Subject:
            Name: ""
        TLS:
          Cipher:
            Name: ""
        Last:
          Packet:
            Received: 0
        Close:
          In: 20
        Secure: True
        X509:
          Certificate:
            Verified: False
        Queue:
          Max:
            Size: 0
          Add:
            Failures: 0
        Flow:
          Token: ""
      Client 7747:
        Socket:
          Type: "TLS_OUTG"
          State: "INUSE"
          ID:
            Local: 825433667
            Global: 654
          Buffer:
            Input:
              Length: 5120
            Output:
              Length: 20000
        Local:
          Address: "10.10.10.10:27573"
        Remote:
          Address: "10.10.10.102:7001"
        Network:
          Number: 2
        Certificate:
          Subject:
            Name: ""
        TLS:
          Cipher:
            Name: "DHE-RSA-AES256-SHA"
        Last:
          Packet:
            Received: -1798628722
        Close:
          In: 900
        Secure: True
        X509:
          Certificate:
            Verified: False
        Queue:
          Max:
            Size: 1
          Add:
            Failures: 0
        Flow:
          Token: ""
*s/end

*s H323:
    Registration:
      Status: Active
      IPv4:
        Address: "10.10.10.10:1719"
    CallSignaling:
      Status: Active
      IPv4:
        Address: "10.10.10.10:1720"
    Assent:
      CallSignaling:
        Status: Inactive
    H46018:
      CallSignaling:
        Status: Inactive
*s/end

*s Applications:
    Presence:
      UserAgent:
        Status: Inactive
        Presentity:
          Count: 0
      Server:
        Subscriptions:
          Count: 0
          Max: 0
          Expired: 0
          Subscribers:
            Count: 0
            Max: 0
        Status: Inactive
        Presentities:
          Count: 0
          Max: 0
        Publications:
          Presentities:
            Count: 0
            Max: 0
    ConferenceFactory:
      Status: Inactive
      NextAlias: ""
    External 1:
      Status:
        ClusterStatus:
          ClusterState: "Disabled"
      LastUpdate:
        Time: "Time not set"
        SecondsSinceLastRefresh: "1403189939"
*s/end

*s FindMeManager: /
*s/end

*s TURN:
    Server:
      Status: Inactive
*s/end

*s Policy: /
*s/end

OK






























xcommand xconfig
*c xConfiguration Login Remote Protocol: LDAP
*c xConfiguration Login Remote LDAP Server Address: ""
*c xConfiguration Login Remote LDAP Server FQDNResolution: AddressRecord
*c xConfiguration Login Remote LDAP Server Port: 389
*c xConfiguration Login Remote LDAP VCS BindUsername: ""
*c xConfiguration Login Remote LDAP VCS BindPassword: "{cipher}XXXXXXXXXX
XXXXXXXXXXXX"
*c xConfiguration Login Remote LDAP VCS BindDN: ""
*c xConfiguration Login Remote LDAP BaseDN Accounts: ""
*c xConfiguration Login Remote LDAP BaseDN Groups: ""
*c xConfiguration Login Remote LDAP Encryption: Off
*c xConfiguration Login Remote LDAP SASL: DIGEST-MD5
*c xConfiguration Login Remote LDAP CRLCheck: None
*c xConfiguration Login Remote LDAP DirectoryType: ActiveDirectory
*c xConfiguration SystemUnit Name: "VCS1-Control"
*c xConfiguration SystemUnit Maintenance Mode: Off
*c xConfiguration Option 1 Key: "116341X300-1-!!!!!!!!"
*c xConfiguration Option 2 Key: "116341P00-1-!!!!!!!!"
*c xConfiguration Option 3 Key: "116341G00-1-!!!!!!!!!"
*c xConfiguration Option 4 Key: "116341U00-1-!!!!!!!!!"
*c xConfiguration Option 5 Key: "116341C00-1-!!!!!!!!"
*c xConfiguration Option 8 Key: "116341Y200-1-!!!!!!!!"
*c xConfiguration Option 9 Key: "116341X200-1-!!!!!!!!"
*c xConfiguration Ethernet 1 Speed: Auto
*c xConfiguration Ethernet 1 IP V4 Address: "10.10.10.10"
*c xConfiguration Ethernet 1 IP V4 SubnetMask: "255.255.255.0"
*c xConfiguration Ethernet 1 IP V6 Address: ""
*c xConfiguration Ethernet 2 Speed: Auto
*c xConfiguration Ethernet 2 IP V4 Address: "192.168.0.100"
*c xConfiguration Ethernet 2 IP V4 SubnetMask: "255.255.255.0"
*c xConfiguration Ethernet 2 IP V6 Address: ""
*c xConfiguration IPProtocol: IPv4
*c xConfiguration IP Gateway: "10.10.10.1"
*c xConfiguration IP QoS Mode: None
*c xConfiguration IP QoS Value: 0
*c xConfiguration IP V6 Gateway: ""
*c xConfiguration IP DNS Domain Name: "######.local"
*c xConfiguration IP DNS Hostname: "VCS1-Control"
*c xConfiguration IP Ephemeral PortRange Start: 40000
*c xConfiguration IP Ephemeral PortRange End: 49999
*c xConfiguration IP RFC4821 Mode: Disabled
*c xConfiguration Administration Telnet Mode: Off
*c xConfiguration Administration SSH Mode: On
*c xConfiguration Administration HTTP Mode: On
*c xConfiguration Administration HTTPS Mode: On
*c xConfiguration Administration LCDPanel Mode: On
*c xConfiguration ExternalManager Address: "10.10.10.104"
*c xConfiguration ExternalManager Path: "tms/public/external/management/system
managementservice.asmx"
*c xConfiguration ExternalManager Protocol: HTTP
*c xConfiguration ExternalManager Server Certificate Verification Mode: On
*c xConfiguration Registration RestrictionPolicy Mode: None
*c xConfiguration Registration RestrictionPolicy Service Protocol: HTTP
*c xConfiguration Registration RestrictionPolicy Service TLS Verify Mode: On
*c xConfiguration Registration RestrictionPolicy Service TLS CRLCheck Mode: Off
*c xConfiguration Registration RestrictionPolicy Service Server 1 Address: ""
*c xConfiguration Registration RestrictionPolicy Service Server 2 Address: ""
*c xConfiguration Registration RestrictionPolicy Service Server 3 Address: ""
*c xConfiguration Registration RestrictionPolicy Service Path: ""
*c xConfiguration Registration RestrictionPolicy Service Status Path: "status"
*c xConfiguration Registration RestrictionPolicy Service UserName: ""
*c xConfiguration Registration RestrictionPolicy Service Password: "{cipher}
XXXXXXXXXXXXXXXXXXXXX"
*c xConfiguration Registration RestrictionPolicy Service DefaultCPL: "<reject
status='504' reason='Registration Policy Unavailable'/>"
*c xConfiguration Alternates ConfigurationMaster: 1
*c xConfiguration Alternates Cluster Name: ""
*c xConfiguration Alternates Peer 1 Address: ""
*c xConfiguration Alternates Peer 2 Address: ""
*c xConfiguration Alternates Peer 3 Address: ""
*c xConfiguration Alternates Peer 4 Address: ""
*c xConfiguration Alternates Peer 5 Address: ""
*c xConfiguration Alternates Peer 6 Address: ""
*c xConfiguration Transform 1 Description: "Transform destination aliases to
URI format"
*c xConfiguration Transform 1 State: Enabled
*c xConfiguration Transform 1 Priority: 1
*c xConfiguration Transform 1 Pattern String: "([^@]*)"
*c xConfiguration Transform 1 Pattern Type: Regex
*c xConfiguration Transform 1 Pattern Behavior: Replace
*c xConfiguration Transform 1 Pattern Replace: "\1@#####.local"
*c xConfiguration Call Loop Detection Mode: On
*c xConfiguration Call Routed Mode: Always
*c xConfiguration Call Services CallsToUnknownIPAddresses: Indirect
*c xConfiguration Call Services Fallback Alias: ""
*c xConfiguration H323 Mode: On
*c xConfiguration H323 Gatekeeper Registration UDP Port: 1719
*c xConfiguration H323 Gatekeeper Registration ConflictMode: Reject
*c xConfiguration H323 Gatekeeper CallSignaling TCP Port: 1720
*c xConfiguration H323 Gatekeeper CallSignaling PortRange Start: 15000
*c xConfiguration H323 Gatekeeper CallSignaling PortRange End: 19999
*c xConfiguration H323 Gatekeeper TimeToLive: 1800
*c xConfiguration H323 Gatekeeper CallTimeToLive: 120
*c xConfiguration H323 Gatekeeper AutoDiscovery Mode: On
*c xConfiguration H323 Gateway CallerId: ExcludePrefix
*c xConfiguration SIP Mode: On
*c xConfiguration SIP Domains Domain 1 Name: "######.com"
*c xConfiguration SIP Domains Domain 2 Name: "######.local"
*c xConfiguration SIP Routes Route 1 Method: "SUBSCRIBE"
*c xConfiguration SIP Routes Route 1 Request Line Pattern: ".*@(%localdomains%|
%ip%)"
*c xConfiguration SIP Routes Route 1 Header Name: "Event"
*c xConfiguration SIP Routes Route 1 Header Pattern: "(ua-profile|phonebook).*"
*c xConfiguration SIP Routes Route 1 Authenticated: Off
*c xConfiguration SIP Routes Route 1 Address: "127.0.0.1"
*c xConfiguration SIP Routes Route 1 Port: 22400
*c xConfiguration SIP Routes Route 1 Transport: TCP
*c xConfiguration SIP Routes Route 1 Tag: "Provisioning"
*c xConfiguration SIP Routes Route 2 Method: "INFO"
*c xConfiguration SIP Routes Route 2 Request Line Pattern: ".*@(%localdomains%|
%ip%)"
*c xConfiguration SIP Routes Route 2 Header Name: "Content-Type"
*c xConfiguration SIP Routes Route 2 Header Pattern: "application/tandberg-
phonebook\+xml"
*c xConfiguration SIP Routes Route 2 Authenticated: Off
*c xConfiguration SIP Routes Route 2 Address: "127.0.0.1"
*c xConfiguration SIP Routes Route 2 Port: 22400
*c xConfiguration SIP Routes Route 2 Transport: TCP
*c xConfiguration SIP Routes Route 2 Tag: "Phonebook"
*c xConfiguration SIP Registration Standard Refresh Strategy: Maximum
*c xConfiguration SIP Registration Standard Refresh Minimum: 45
*c xConfiguration SIP Registration Standard Refresh Maximum: 60
*c xConfiguration SIP Registration Outbound Refresh Strategy: Variable
*c xConfiguration SIP Registration Outbound Refresh Minimum: 300
*c xConfiguration SIP Registration Outbound Refresh Maximum: 3600
*c xConfiguration SIP Registration Outbound Flow Timer: 0
*c xConfiguration SIP Registration Proxy Mode: Off
*c xConfiguration SIP Registration Call Remove: No
*c xConfiguration SIP Session Refresh Value: 1800
*c xConfiguration SIP Session Refresh Minimum: 500
*c xConfiguration SIP UDP Mode: Off
*c xConfiguration SIP UDP Port: 5060
*c xConfiguration SIP TCP Mode: On
*c xConfiguration SIP TCP Port: 5060
*c xConfiguration SIP TCP Outbound Port Start: 25000
*c xConfiguration SIP TCP Outbound Port End: 29999
*c xConfiguration SIP TLS Mode: On
*c xConfiguration SIP TLS Port: 5061
*c xConfiguration SIP TLS Certificate Revocation Checking Mode: Off
*c xConfiguration SIP TLS Certificate Revocation Checking OCSP Mode: On
*c xConfiguration SIP TLS Certificate Revocation Checking CRL Mode: On
*c xConfiguration SIP TLS Certificate Revocation Checking CRL Network Fetch
Mode: On
*c xConfiguration SIP TLS Certificate Revocation Checking Source Inaccessibility
Behavior: Fail
*c xConfiguration SIP Require UDP BFCP Mode: On
*c xConfiguration SIP Require Duo Video Mode: On
*c xConfiguration SIP Authentication Retry Limit: 3
*c xConfiguration SIP Authentication NTLM Mode: Auto
*c xConfiguration SIP Authentication NTLM SA Lifetime: 28800
*c xConfiguration SIP Authentication NTLM SA Limit: 10000
*c xConfiguration SIP Authentication Digest Nonce ExpireDelta: 300
*c xConfiguration SIP Authentication Digest Nonce Maximum Use Count: 128
*c xConfiguration SIP Authentication Digest Nonce Limit: 10000
*c xConfiguration SIP Authentication Digest Nonce Length: 60
*c xConfiguration SIP GRUU Mode: On
*c xConfiguration SIP MediaRouting ICE Mode: Off
*c xConfiguration Interworking Mode: RegisteredOnly
*c xConfiguration Interworking Encryption Mode: Auto
*c xConfiguration Interworking Encryption Replay Protection Mode: Off
*c xConfiguration Interworking BFCP Compatibility Mode: Auto
*c xConfiguration Interworking Require Invite Header Mode: On
*c xConfiguration Traversal Media Port Start: 50000
*c xConfiguration Traversal Media Port End: 52399
*c xConfiguration Authentication UserName: ""
*c xConfiguration Authentication Password: "{cipher}XXXXXXXXXXXXXXXXXXXXXX"
*c xConfiguration Authentication LDAP AliasOrigin: LDAP
*c xConfiguration Authentication ADS ADDomain: ""
*c xConfiguration Authentication ADS Workgroup: ""
*c xConfiguration Authentication ADS MachinePassword Refresh: On
*c xConfiguration Authentication ADS SPNEGO: Enabled
*c xConfiguration Authentication ADS SecureChannel: Auto
*c xConfiguration Authentication ADS Encryption: TLS
*c xConfiguration Authentication ADS Mode: Off
*c xConfiguration Authentication ADS Clockskew: 300
*c xConfiguration Zones Policy Mode: SearchRules
*c xConfiguration Zones Policy SearchRules Rule 1 Name: "Local zone ? no domain"
*c xConfiguration Zones Policy SearchRules Rule 1 Description: "Search local
zone for H.323 devices (strip domain)"
*c xConfiguration Zones Policy SearchRules Rule 1 Priority: 48
*c xConfiguration Zones Policy SearchRules Rule 1 Protocol: Any
*c xConfiguration Zones Policy SearchRules Rule 1 Source Mode: Any
*c xConfiguration Zones Policy SearchRules Rule 1 Authentication: No
*c xConfiguration Zones Policy SearchRules Rule 1 Mode: AliasPatternMatch
*c xConfiguration Zones Policy SearchRules Rule 1 Pattern Type: Regex
*c xConfiguration Zones Policy SearchRules Rule 1 Pattern String: "(.+)
@######.local.*"
*c xConfiguration Zones Policy SearchRules Rule 1 Pattern Behavior: Replace
*c xConfiguration Zones Policy SearchRules Rule 1 Pattern Replace: "\1"
*c xConfiguration Zones Policy SearchRules Rule 1 Progress: Continue
*c xConfiguration Zones Policy SearchRules Rule 1 Target Type: Zone
*c xConfiguration Zones Policy SearchRules Rule 1 Target Name: "LocalZone"
*c xConfiguration Zones Policy SearchRules Rule 1 State: Enabled
*c xConfiguration Zones Policy SearchRules Rule 2 Name: "Local zone ? full URI"
*c xConfiguration Zones Policy SearchRules Rule 2 Description: "Search local
zone for SIP and H.323 devices with a domain"
*c xConfiguration Zones Policy SearchRules Rule 2 Priority: 51
*c xConfiguration Zones Policy SearchRules Rule 2 Protocol: Any
*c xConfiguration Zones Policy SearchRules Rule 2 Source Mode: Any
*c xConfiguration Zones Policy SearchRules Rule 2 Authentication: No
*c xConfiguration Zones Policy SearchRules Rule 2 Mode: AliasPatternMatch
*c xConfiguration Zones Policy SearchRules Rule 2 Pattern Type: Regex
*c xConfiguration Zones Policy SearchRules Rule 2 Pattern String: "(.+)
@######.local.*"
*c xConfiguration Zones Policy SearchRules Rule 2 Pattern Behavior: Leave
*c xConfiguration Zones Policy SearchRules Rule 2 Pattern Replace: ""
*c xConfiguration Zones Policy SearchRules Rule 2 Progress: Continue
*c xConfiguration Zones Policy SearchRules Rule 2 Target Type: Zone
*c xConfiguration Zones Policy SearchRules Rule 2 Target Name: "LocalZone"
*c xConfiguration Zones Policy SearchRules Rule 2 State: Enabled
*c xConfiguration Zones Policy SearchRules Rule 3 Name: "Traversal zone search rule"
*c xConfiguration Zones Policy SearchRules Rule 3 Description: "Search traversal
zone (Cisco VCS Expressway)"
*c xConfiguration Zones Policy SearchRules Rule 3 Priority: 100
*c xConfiguration Zones Policy SearchRules Rule 3 Protocol: Any
*c xConfiguration Zones Policy SearchRules Rule 3 Source Mode: Any
*c xConfiguration Zones Policy SearchRules Rule 3 Authentication: No
*c xConfiguration Zones Policy SearchRules Rule 3 Mode: AnyAlias
*c xConfiguration Zones Policy SearchRules Rule 3 Progress: Continue
*c xConfiguration Zones Policy SearchRules Rule 3 Target Type: Zone
*c xConfiguration Zones Policy SearchRules Rule 3 Target Name: "TraversalZone"
*c xConfiguration Zones Policy SearchRules Rule 3 State: Enabled
*c xConfiguration Zones Policy SearchRules Rule 4 Name: "External IP address
search rule"
*c xConfiguration Zones Policy SearchRules Rule 4 Description: "Route external
IP address"
*c xConfiguration Zones Policy SearchRules Rule 4 Priority: 100
*c xConfiguration Zones Policy SearchRules Rule 4 Protocol: Any
*c xConfiguration Zones Policy SearchRules Rule 4 Source Mode: Any
*c xConfiguration Zones Policy SearchRules Rule 4 Authentication: No
*c xConfiguration Zones Policy SearchRules Rule 4 Mode: AnyIPAddress
*c xConfiguration Zones Policy SearchRules Rule 4 Progress: Continue
*c xConfiguration Zones Policy SearchRules Rule 4 Target Type: Zone
*c xConfiguration Zones Policy SearchRules Rule 4 Target Name: "TraversalZone"
*c xConfiguration Zones Policy SearchRules Rule 4 State: Enabled
*c xConfiguration Zones Policy SearchRules Rule 5 Name: "LocalZoneMatch"
*c xConfiguration Zones Policy SearchRules Rule 5 Description: "Default rule:
queries the Local Zone for any alias"
*c xConfiguration Zones Policy SearchRules Rule 5 Priority: 50
*c xConfiguration Zones Policy SearchRules Rule 5 Protocol: Any
*c xConfiguration Zones Policy SearchRules Rule 5 Source Mode: Any
*c xConfiguration Zones Policy SearchRules Rule 5 Authentication: No
*c xConfiguration Zones Policy SearchRules Rule 5 Mode: AnyAlias
*c xConfiguration Zones Policy SearchRules Rule 5 Progress: Continue
*c xConfiguration Zones Policy SearchRules Rule 5 Target Type: Zone
*c xConfiguration Zones Policy SearchRules Rule 5 Target Name: "LocalZone"
*c xConfiguration Zones Policy SearchRules Rule 5 State: Enabled
*c xConfiguration Zones DefaultZone Authentication Mode: DoNotCheckCredentials
*c xConfiguration Zones DefaultZone SIP Record Route Address Type: IP
*c xConfiguration Zones DefaultZone SIP TLS Verify Mode: Off
*c xConfiguration Zones DefaultZone SIP Media Encryption Mode: Auto
*c xConfiguration Zones LocalZone DefaultSubZone SIP Media Encryption Mode: Auto
*c xConfiguration Zones LocalZone DefaultSubZone Authentication Mode:
DoNotCheckCredentials
*c xConfiguration Zones LocalZone DefaultSubZone Registrations: Allow
*c xConfiguration Zones LocalZone DefaultSubZone Bandwidth Total Mode: Unlimited
*c xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Inter Mode:
Unlimited
*c xConfiguration Zones LocalZone DefaultSubZone Bandwidth PerCall Intra Mode:
Unlimited
*c xConfiguration Zones LocalZone TraversalSubZone Bandwidth Total Mode: Unlimited
*c xConfiguration Zones LocalZone TraversalSubZone Bandwidth PerCall Mode:
Unlimited
*c xConfiguration Zones LocalZone SIP Record Route Address Type: IP
*c xConfiguration Zones Zone 1 Name: "TraversalZone"
*c xConfiguration Zones Zone 1 HopCount: 15
*c xConfiguration Zones Zone 1 H323 Mode: On
*c xConfiguration Zones Zone 1 SIP Mode: On
*c xConfiguration Zones Zone 1 Type: TraversalClient
*c xConfiguration Zones Zone 1 TraversalClient Authentication Mode: DoNot
CheckCredentials
*c xConfiguration Zones Zone 1 TraversalClient Authentication UserName:
"######auth"
*c xConfiguration Zones Zone 1 TraversalClient Authentication Password:
"{cipher}XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
*c xConfiguration Zones Zone 1 TraversalClient Registrations: Allow
*c xConfiguration Zones Zone 1 TraversalClient H323 Protocol: Assent
*c xConfiguration Zones Zone 1 TraversalClient H323 Port: 6001
*c xConfiguration Zones Zone 1 TraversalClient SIP Protocol: Assent
*c xConfiguration Zones Zone 1 TraversalClient SIP Port: 7001
*c xConfiguration Zones Zone 1 TraversalClient SIP Transport: TLS
*c xConfiguration Zones Zone 1 TraversalClient SIP TLS Verify Mode: Off
*c xConfiguration Zones Zone 1 TraversalClient SIP Poison Mode: Off
*c xConfiguration Zones Zone 1 TraversalClient SIP Media Encryption Mode: Auto
*c xConfiguration Zones Zone 1 TraversalClient RetryInterval: 120
*c xConfiguration Zones Zone 1 TraversalClient Peer 1 Address: "10.10.10.102"
*c xConfiguration Zones Zone 1 TraversalClient Peer 2 Address: ""
*c xConfiguration Zones Zone 1 TraversalClient Peer 3 Address: ""
*c xConfiguration Zones Zone 1 TraversalClient Peer 4 Address: ""
*c xConfiguration Zones Zone 1 TraversalClient Peer 5 Address: ""
*c xConfiguration Zones Zone 1 TraversalClient Peer 6 Address: ""
*c xConfiguration Bandwidth Default: 384
*c xConfiguration Bandwidth Downspeed PerCall Mode: On
*c xConfiguration Bandwidth Downspeed Total Mode: On
*c xConfiguration Bandwidth Link 1 Name: "DefaultSZtoTraversalSZ"
*c xConfiguration Bandwidth Link 1 Node1 Name: "DefaultSubZone"
*c xConfiguration Bandwidth Link 1 Node2 Name: "TraversalSubZone"
*c xConfiguration Bandwidth Link 1 Pipe1 Name: ""
*c xConfiguration Bandwidth Link 1 Pipe2 Name: ""
*c xConfiguration Bandwidth Link 2 Name: "DefaultSZtoDefaultZ"
*c xConfiguration Bandwidth Link 2 Node1 Name: "DefaultSubZone"
*c xConfiguration Bandwidth Link 2 Node2 Name: "DefaultZone"
*c xConfiguration Bandwidth Link 2 Pipe1 Name: ""
*c xConfiguration Bandwidth Link 2 Pipe2 Name: ""
*c xConfiguration Bandwidth Link 3 Name: "DefaultSZtoClusterSZ"
*c xConfiguration Bandwidth Link 3 Node1 Name: "DefaultSubZone"
*c xConfiguration Bandwidth Link 3 Node2 Name: "ClusterSubZone"
*c xConfiguration Bandwidth Link 3 Pipe1 Name: ""
*c xConfiguration Bandwidth Link 3 Pipe2 Name: ""
*c xConfiguration Bandwidth Link 4 Name: "TraversalSZtoDefaultZ"
*c xConfiguration Bandwidth Link 4 Node1 Name: "TraversalSubZone"
*c xConfiguration Bandwidth Link 4 Node2 Name: "DefaultZone"
*c xConfiguration Bandwidth Link 4 Pipe1 Name: ""
*c xConfiguration Bandwidth Link 4 Pipe2 Name: ""
*c xConfiguration Bandwidth Link 5 Name: "Zone001ToTraversalSZ"
*c xConfiguration Bandwidth Link 5 Node1 Name: "TraversalZone"
*c xConfiguration Bandwidth Link 5 Node2 Name: "TraversalSubZone"
*c xConfiguration Bandwidth Link 5 Pipe1 Name: ""
*c xConfiguration Bandwidth Link 5 Pipe2 Name: ""
*c xConfiguration Policy AdministratorPolicy Mode: Off
*c xConfiguration Policy AdministratorPolicy Service Protocol: HTTP
*c xConfiguration Policy AdministratorPolicy Service TLS Verify Mode: On
*c xConfiguration Policy AdministratorPolicy Service TLS CRLCheck Mode: Off
*c xConfiguration Policy AdministratorPolicy Service Server 1 Address: ""
*c xConfiguration Policy AdministratorPolicy Service Server 2 Address: ""
*c xConfiguration Policy AdministratorPolicy Service Server 3 Address: ""
*c xConfiguration Policy AdministratorPolicy Service Path: ""
*c xConfiguration Policy AdministratorPolicy Service Status Path: "status"
*c xConfiguration Policy AdministratorPolicy Service UserName: ""
*c xConfiguration Policy AdministratorPolicy Service Password: "{cipher}
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX"
*c xConfiguration Policy AdministratorPolicy Service DefaultCPL: "<reject
status='504' reason='Admin Policy Unavailable'/>"
*c xConfiguration Policy FindMe Mode: Off
*c xConfiguration Policy FindMe CallerId: IncomingID
*c xConfiguration Policy FindMe UserDeviceRestriction: Off
*c xConfiguration Applications ConferenceFactory Mode: Off
*c xConfiguration Applications ConferenceFactory Alias: ""
*c xConfiguration Applications ConferenceFactory Template: ""
*c xConfiguration Applications ConferenceFactory Range Start: 1
*c xConfiguration Applications ConferenceFactory Range End: 65535
*c xConfiguration Applications OCS Relay Mode: Off
*c xConfiguration Applications OCS Relay OCS Domain: ""
*c xConfiguration Applications OCS Relay OCS Routing Prefix: "ocs"
*c xConfiguration Applications Presence Server Mode: Off
*c xConfiguration Applications Presence Server Publication ExpireDelta: 1800
*c xConfiguration Applications Presence Server Subscription ExpireDelta: 3600
*c xConfiguration Applications Presence User Agent Mode: Off
*c xConfiguration Applications Presence User Agent ExpireDelta: 3600
*c xConfiguration Applications Presence User Agent RetryDelta: 1800
*c xConfiguration Applications Presence User Agent Presentity Idle Status: Online
*c xConfiguration ResourceUsage Warning Activation Level: 90
*c xConfiguration Services AdvancedMediaGateway Zone Name: ""
*c xConfiguration Services AdvancedMediaGateway Policy Mode: Off

OK
exit
Bye!

Устранение неполадок

Это три самых обычных проблемы, с которыми вы могли бы встретиться:

  • Используется неправильный или дефектный кабель последовательного порта. Гарантируйте использование кабеля, который шел с устройством.

  • Неузнаваемые символы отображаются на экране консоли. Это указывает, что скорость передачи установлена неправильно. Скорости передачи основываются на множителях два, таким образом, можно удвоить или разделить на два значение, как необходимый, пока вы не находите правильный параметр. В этом случае правильный параметр должен быть 115,200.

  • Вы неспособны соединиться с программой эмуляции терминала. Помимо проблем разводки кабелей, эта проблема обычно вызывается одной из этих проблем:

    • Вы пытаетесь соединиться через Telnet или SSH и должны изменить тип соединения на сериал при использовании последовательного подключения.

    • Вы находитесь на неправильном COM - порте. Для обнаружения COM - порта, что использование ПК с основанными на USB последовательными подключениями, перейдите к Панели управления> Менеджер устройств и нажмите Ports. Из этого окна можно проверить COM - порт, который назначен на последовательное устройство USB.

    • У вас нет драйверов для последовательного устройства установленными. Если это верно, необходимо определить местоположение и установить их.


  • Вы неспособны к SSH в устройство. Помимо проблем разводки кабелей, эта проблема обычно вызывается одной из этих проблем:

    • Вы пытаетесь соединиться через SSH и не можете достигнуть устройства к невозможности сетевого подключения. Исправьте невозможность сетевого подключения. Также SSH не мог бы быть включен для устройства. Сеть/HTTP/HTTPS в устройство и гарантирует, что под доступом SSH включают: Конфигурация> SystemConfiguration> Сетевые сервисы.

    • Вам не кэшировали ключ алгоритма цифровой подписи райвеста шамира адлемана (RSA) от устройства., Как правило, вам предлагают принять ключ RSA. Обязательно примите ключ.

    • Вход в систему отказывает из-за неверного имени пользователя и пароля. Удостоверьтесь, что вы используете корректное имя пользователя и пароль для устройства.

Связанные обсуждения сообщества поддержки Cisco

В рамках сообщества поддержки Cisco можно задавать и отвечать на вопросы, обмениваться рекомендациями и совместно работать со своими коллегами.