Command Reference BookMap
Wrapper
Wrapper

Wrapper

create vnic

QA Test Sprint 9 CSCta77961: Test that each Command appears in its own page.

karthik has inserted part of sprint6-round1 build

karthik added this to check wan bridge issue in sprint12

To create a VNIC (Virtual Network Interface Card), use the create vnic command.

create vnic name { fabric { a | a-b | b | b-a } | eth-if eth-if } *

構文の説明

name

VNIC template name. The range of valid values is 1 to 16.

fabric

Specifies the fabric switch identification number.

a

Specifies switch A.

a-b

Specifies redundant, with switch A as primary.

b

Specifies switch B.

b-a

Specifies redundant, with switch B as primary.

eth-if

Specifies a Ethernet interface.

eth-if

Ethernet interface name. The range of valid values is 1 to 16.

コマンド デフォルト

None

コマンド モード

Service profile (/org/service-profile)

コマンド履歴

Release Modification
1.0(1)

This command was introduced.

使用上のガイドライン

Use this command to create a vNIC with the specified name, and enters organization virtual NIC mode.

This example shows how to create a vNIC:

switch-A# scope org org3
switch-A /org # scope service-profile sp1                                       
switch-A /org/service-profile # create vnic vnic110 
switch-A /org/service-profile/vnic* # commit-buffer
switch-A /org/service-profile/vnic #                                       

関連コマンド

QA Test: CSCtd06182 Check that the shortdescriptions appear on the dfescription column below. Also click on the first cross chapter link and see that it works in html and pdf chapters

コマンド

説明

create vsan

This is short description for vsan command  

create vnic-egress-policy

This is short dfescription for create vnic-egress-policy command