Cisco インターフェイスとモジュール : Cisco WAN スイッチング モジュール

CVM と UVM のハードウェア エラーの要約

2005 年 10 月 4 日 - ライター翻訳版
その他のバージョン: PDFpdf | 機械翻訳版 (2013 年 8 月 21 日) | 英語版 (2005 年 10 月 4 日) | フィードバック

目次

概要
前提条件
      要件
      使用するコンポーネント
      表記法
CVM カードのエラー要約
CVM カードの障害コード
UVM カードのエラー要約
UVM カードのカテゴリ 06 の障害コード
dspcderr コマンドの出力例
関連するシスコ サポート コミュニティ ディスカッション
関連情報

概要

このドキュメントで説明しているハードウェア エラー コードが発生する可能性があるのは、Cisco IGX スイッチ上の Channelized Voice Module(CVM)および Universal Voice Module(UVM)のカードです。 これらが表示されるのは、dspcderrs slot-num コマンドを発行した際です。

前提条件

要件

このドキュメントの読者には次のトピックに関する知識が必要です。

  • Cisco IGX ハードウェアおよびソフトウェア

使用するコンポーネント

このドキュメントは、特定のソフトウェアやハードウェアのバージョンに限定されるものではありません。

表記法

ドキュメント表記の詳細は、『シスコ テクニカル ティップスの表記法』を参照してください。

CVM カードのエラー要約

  Byte 1 - Function code
  Byte 2 - Error function code
  Byte 3 - Error category
           01 - Download Failure 
           02 - Powerup Failure
           03 - Selftest Failure
           04 - Memory test failure
           05 - Boot PROM failure
           06 - Non Boot PROM (Firmware) failure  
  Byte 4 - Slot Number
  Byte 5 - Processor 
  Byte 6 - a. Selftest # in case of Error Category 03
           b. Failure Code in case of Error Category 06 
  Byte 7-10 - Sub Category
  

CVM カードの障害コード

  FC 00 01 02 03 04 05 06 07
  0B 00 01 xx 01 xx xx xx xx      Download failure
  0B 01 02 xx 01 xx xx xx 05      Power up failure: NOVRAM checksum failed
  0B 01 02 xx 01 xx xx xx 06      Power up failure: FIFO loopback failed
  0B 01 02 xx 01 xx xx xx 07      Power up failure: No state 0 message
  0B 01 02 xx 01 xx xx xx 10      Power up failure: FIFO test failed
  0B 01 02 xx 01 xx xx xx 11      Power up failure: No state 1 msg, EE chks fail
  0B 01 02 xx 01 xx xx xx F0      Power up failure: Never rc'd slot ID command
  0B 01 02 xx 01 xx xx xx 12      12 or greater: Passed boot PROM
  0B 01 02 xx 01 xx xx xx 19      pident_p(ZEROES,target_ptr);  * caller's id ? *
  0B 01 02 xx 01 xx xx xx 1A      pcreate_p(coms_name,T_PRTY7,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 1B      pcreate_p(bcard_name,T_PRTY4,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 1C      pcreate_p(evntp_name,T_PRTY8,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 1D      pcreate_p(mktsp_name,T_PRTY5,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 1E      pcreate_p(mktrn_name,T_PRTY6,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 1F      pcreate_p(injs_name,T_PRTY5,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 20      pcreate_p(tpu_name,T_PRTY4,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 21      pcreate_p(qmgr_name,T_PRTY4,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 22      pcreate_p(dpu0_name,T_PRTY4,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 23      pcreate_p(dpu1_name,T_PRTY4,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 24      pcreate_p(dpu2_name,T_PRTY4,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 25      pcreate_p(dpu3_name,T_PRTY4,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 26      pcreate_p(iec_name,T_PRTY4,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 27      pcreate_p(idle_name,T_PRTY1,SSIZE,target_ptr);
  0B 01 02 xx 01 xx xx xx 28      pcreate_q(emsg_qname, target_ptr);
  0B 01 02 xx 01 xx xx xx 29      pstart_p(coms_tid,_com_srvr);
  0B 01 02 xx 01 xx xx xx 2A      pstart_p(evntp_tid,_evnt_proc);
  0B 01 02 xx 01 xx xx xx 2B      pstart_p(bcard_tid,_bc_task);
  0B 01 02 xx 01 xx xx xx 2C      pstart_p(tpu_tid,_tpu_task);
  0B 01 02 xx 01 xx xx xx 2D      pstart_p(qmgr_tid,_qmgr_task);
  0B 01 02 xx 01 xx xx xx 2E      pstart_p(dpu0_tid,_dpu0_task);
  0B 01 02 xx 01 xx xx xx 2F      pstart_p(dpu1_tid,_dpu1_task);
  0B 01 02 xx 01 xx xx xx 30      pstart_p(dpu2_tid,_dpu2_task);
  0B 01 02 xx 01 xx xx xx 31      pstart_p(dpu3_tid,_dpu3_task);
  0B 01 02 xx 01 xx xx xx 32      pstart_p(mktrn_tid,_mktrn);
  0B 01 02 xx 01 xx xx xx 33      pstart_p(mktsp_tid,_mktsp);
  0B 01 02 xx 01 xx xx xx 34      pstart_p(injs_tid,_injs);
  0B 01 02 xx 01 xx xx xx 35      pstart_p(idle_tid,_idle);
  0B 01 02 xx 01 xx xx xx 36      pstart_p(iec_tid,_iec_task);
  0B 00 03 xx 01 xx xx xx xx      Selftest failure
  
  0B 00 04 xx 01 xx xx xx xx      Memory test failure
  0B 00 05 xx 01 00 00 00 00      Boot PROM: Waiting for HF flag change from DSP
  0B 00 05 xx 01 00 00 00 01      Boot PROM: Waiting for TXDE to go true from DSP
  0B 00 05 xx 01 00 00 00 02      Boot PROM: Waiting for RXDF to go true from DSP
  0B 00 05 xx 01 00 00 00 03      Boot PROM: Unable to initialize DSP
  0B 00 05 xx 01 00 00 00 04      Boot PROM: Unable to internal load DSP
  0B 00 05 xx 01 00 00 00 05      Boot PROM: Unable to program EEPROM
  0B 00 05 xx 01 00 00 00 06      Boot PROM: Bad message from Cbus controller
  0B 00 05 xx 01 00 00 00 07      Boot PROM: 9th bit msg format err from suprvisor
  0B 00 05 xx 01 00 00 00 08      Boot PROM: No NMICLR in response to NMI to supv
  0B 00 05 xx 01 00 00 00 09      Boot PROM: Timeout awaiting space in ADMIN FIFO
  0B 00 05 xx 01 00 00 00 10      Boot PROM: CPU failed testing Dual Port RAM
  0B 00 05 xx 01 00 00 00 11      Boot PROM: fail searching for image
  0B 00 05 xx 01 00 00 00 12      Boot PROM: fail CPU verify DSP clearing DPRAM
  0B 00 05 xx 01 00 00 00 18      Boot PROM: bus error
  0B 00 05 xx 01 00 00 00 19      Boot PROM: address error
  0B 00 05 xx 01 00 00 00 20      Boot PROM: fail waiting for state 1 dsp bad failed
                                             dsp CPU communication unexpected interrupt
                                             couldn't execute bootstrap couldn't execute loader
  0B 00 05 xx 01 00 00 00 21      Boot PROM: dsp failed Dual Access RAM test
  0B 00 05 xx 01 00 00 00 22      Boot PROM: dsp failed Single Access RAM test
  0B 00 05 xx 01 00 00 00 23      Boot PROM: dsp failed Dual Port RAM test
  0B 00 05 xx 01 00 00 00 30      Boot PROM: fail waiting for state 3 dsp bad failed dsp
                                  CPU communication unixpected interrupt couldn't execute loader
  0B 00 05 xx 01 00 00 00 50      Boot PROM: fail waiting for state 5 dsp bad failed dsp CPU
                                  communication unixpected interrupt couldn't execute loader
  0B 00 05 xx 01 00 00 00 60      Boot PROM: Rcv'd Cbus cmd while awaiting event
  0B 00 05 xx 01 00 00 00 61      Boot PROM: Received unknowm event
  0B 00 05 xx 01 00 00 00 62      Boot PROM: Couldn't get ownership of global ubs
  0B 00 05 xx 01 00 00 00 70      Boot PROM: RTLCA failed to program, no DONE
  0B 00 05 xx 01 00 00 00 71      Boot PROM: RTLCA failed to program, RCVERR
  0B 00 05 xx 01 00 00 00 72      Boot PROM: RTLCA failed to program, no DTACK
  0B 00 05 xx 01 00 00 00 80      Boot PROM: RTLCA failed to program, no DONE
  0B 00 05 xx 01 00 00 00 81      Boot PROM: RTLCA failed to program, PIERR
  0B 00 05 xx 01 00 00 00 82      Boot PROM: RTLCA failed to program, no DTACK
  0B 00 05 xx 01 00 00 00 91      Boot PROM: RTLCA failed to program, mode not clr
  0B 00 05 xx 01 00 00 00 92      Boot PROM: RTLCA failed to program, no DTACK
  
  0B xx 06 xx 01 00               Boot PROM:
  0B xx 06 xx 01 01               Boot PROM:
  0B xx 06 xx 01 02               Boot PROM:
  0B xx 06 xx 01 03               Boot PROM:
  0B xx 06 xx 01 04               Boot PROM:
  0B xx 06 xx 01 05               Boot PROM:
  0B xx 06 xx 01 06               Boot PROM:
  0B xx 06 xx 01 07               Boot PROM:
  0B xx 06 xx 01 08               8751 failed to send watchdog command
  0B xx 06 xx 01 09               Backcard LCA error
  0B xx 06 xx 01 0A               Backcard missing
  0B xx 06 xx 01 0B               Invalid Backcard Number
  0B xx 06 xx 01 0C               Invalid Backcard Type
  0B xx 06 xx 01 0D               Buffer Allocation Error
  0B xx 06 xx 01 0E               Backcard not configured
  0B xx 06 xx 01 0F               Not defined
  0B xx 06 xx 01 10               pSOS kernel error
  0B xx 06 xx 01 11               Not defined
  0B xx 06 xx 01 12               Command exceeds maximum length
  0B xx 06 xx 01 13               Unexpected end of command
  0B xx 06 xx 01 14               Command not properly terminated
  0B xx 06 xx 01 15               Command expected but CBUS FIFO found empty
  0B xx 06 xx 01 16               Admin BUS ERROR
  0B xx 06 xx 01 17               Admin ADDRESS ERROR
  0B xx 06 xx 01 18               CRFIFO Synchronization Error
  0B xx 06 xx 01 19               Spurious interrupt
  0B xx 06 xx 01 1A               No Multiframe Interrupts
  0B xx 06 xx 01 1B               Routing Table RAM failure
  0B xx 06 xx 01 20               Event Processor found illegal message source
  0B xx 06 xx 01 21               Event Processor found illegal message code
  0B xx 06 xx 01 23               Event Processor got unsolicited message fragment
  0B xx 06 xx 01 24 00 00 00 01   Fragment timeout, Mktsp task (signaling)
  0B xx 06 xx 01 24 00 00 00 02   Fragment timeout, INJS
  0B xx 06 xx 01 24 00 00 00 04   Fragment timeout, QMGR task
  0B xx 06 xx 01 24 00 00 00 08   Fragment timeout, IEC task
  0B xx 06 xx 01 24 00 00 00 10   Fragment timeout, Backcard task
  0B xx 06 xx 01 24 00 00 00 20   Fragment timeout, Comsrvr
  0B xx 06 xx 01 24 00 00 00 40   Fragment timeout, Evntproc
  0B xx 06 xx 01 24 00 00 00 80   Fragment timeout, TPU task
  0B xx 06 xx 01 24 00 00 01 00   Fragment timeout, Idle task
  0B xx 06 xx 01 24 00 00 02 00   Fragment timeout, Mktrn task (signaling)
  0B xx 06 xx 01 24 00 00 04 00   Fragment timeout, DPU0 task
  0B xx 06 xx 01 24 00 00 08 00   Fragment timeout, DPU1 task
  0B xx 06 xx 01 24 00 00 10 00   Fragment timeout, DPU2 task
  0B xx 06 xx 01 24 00 00 20 00   Fragment timeout, DPU3 task
  0B xx 06 xx 01 24 00 00 80 00   Fragment timeout, TRNSFR
  0B xx 06 xx 01 25               Event Transmit timeout
  0B xx 06 xx 01 26 00 00 00 04   DSP timeout err, QMGR task
  0B xx 06 xx 01 26 00 00 00 80   DSP timeout err, TPU task
  0B xx 06 xx 01 26 00 00 04 00   DSP timeout err, DPU0 task
  0B xx 06 xx 01 26 00 00 08 00   DSP timeout err, DPU1 task
  0B xx 06 xx 01 26 00 00 10 00   DSP timeout err, DPU2 task
  0B xx 06 xx 01 26 00 00 20 00   DSP timeout err, DPU3 task
  0B xx 06 xx 01 26 00 00 3c 84   All DSPs, likely Gbus lockup by one DSP
  0B xx 06 xx 01 27               Unknown event function code from DSP
  0B xx 06 xx 01 30               Internal allocation error (connection record)
  0B xx 06 xx 01 31               Internal allocation error (tpu record)
  0B xx 06 xx 01 32               Internal allocation error (tcn)
  0B xx 06 xx 01 33               Internal allocation error (dpu lcn)
  0B xx 06 xx 01 34               Internal allocation error (dpu ds0)
  0B xx 06 xx 01 35               Internal allocation error (dpu application)
  0B xx 06 xx 01 36               Internal allocation error (lcn)
  0B xx 06 xx 01 40               Checksum error in IEC event
  0B xx 06 xx 01 41               Illegal character in IEC command
  0B xx 06 xx 01 42               CRC error in IEC command
  0B xx 06 xx 01 43               IEC watchdogged
  0B xx 06 xx 01 44               IEC maximum command retries exceeded
  0B xx 06 xx 01 45               Illegal character in IEC response
  0B xx 06 xx 01 46               Error in IEC response
  0B xx 06 xx 01 47               Unknown response from IEC
  0B xx 06 xx 01 48               IEC fails to respond
  0B xx 06 xx 01 80               MISC_HWERR
  0B xx 06 xx 01 81               TXERR
  0B xx 06 xx 01 82               RTERR
  0B xx 06 xx 01 84               QBERR
  0B xx 06 xx 01 88               GBERR
  

UVM カードのエラー要約

  Byte 1 - Function code
    Byte 2 - Error function code
    Byte 3 - Error category
             01 - Download Failure 
             02 - Powerup Failure
             03 - Selftest Failure
             04 - Memory test failure
             05 - Boot PROM failure
             06 - Non Boot PROM (Firmware) failure
             07 - Admin Watchdog failure   
    Byte 4 - MSB = 1, Next 7 bits contain card type ( UVM == 0x28)
                      Therefore, this byte will contain A8 always. 
    Byte 5 - Processor
    Byte 6 - a. Selftest # in case of Error Category 03
             b. Failure Code in case of Error Category 06
    Byte 7-10 - Sub Category
  

UVM カードのカテゴリ 06 の障害コード

  Error Code      0x00-0x05       Internal error - Boot Prom   
  /* hardware error */
  HE_DSP_DOWNLOAD 0x06            DSP download error           
  HE_UVI_DOWNLOAD 0x07            UVI download error           
  HE_DEATH        0x08            8751 watchdogged             
  HE_NO_BC        0x0a            missing UVI                  
  HE_SWBUG        0x0f            software bug                 
  HE_PSOS_ERR     0x10            unexepected PSOS return code 
  HE_TIMEOUT      0x11            message timeout              
  HE_INVALID_LEN  0x12            message length > max         
  HE_UNEXP_EOM    0x13            unexpected end of command    
  HE_SHORT_MSG    0x14            cmd not properly terminated  
  HE_BUS_ERR      0x16            68000 bus error occurred     
  HE_ADR_ERR      0x17            68000 address error occurred 
  HE_PKT_SYNC     0x18            packet in FIFO sync err      
  HE_UNEXP_INT    0x19            unexpected interrupt         
  HE_NO_MFINT     0x1a            no MF intr from backcard     
  HE_RTRAM        0x1b            routing Table RAM failed     
  HE_UVIEC_FAIL   0x1c            UVI EC failed                
  HE_UVIEC_ALLOC  0x1d            UVI EC allocation error - No EC available for channels added
  
  /* command error */
  CE_LBCKSM       0x0b            lbus checksum error (UVI)    
  CE_INVBC        0x0c            invalid uvi type (UVI)       
  CE_LBOVRN       0x0d            lbus overrun (UVI)           
  CE_CONFIG       0x0e            uvi not configured (UVI)     
  
  /* internal error codes */
  HE_DSP_DEAD     0x26            DSP Watchdog Timeout         
  HE_ILL_DSP_EVT  0x27            illegal event got from DSP   
  HE_TASK_DEAD    0x28            task not responding - may be caused by excessive signaling transitions.                 
  HE_CAS_PROC     0x29            CAS function not initialized 
  HE_CCS_PROC     0x2a            CCS function not initialized 
  
  /* dbus driver error */
  HE_DBUS_DRVERR  0x50            dbus driver error            
  HE_DBUS_SM      0x51            cbus semaphore timeout       
  HE_DBUS_TXLEN   0x52            dbus transmit length         
  HE_DBUS_TXFULL  0x53            dbus transmit buffer full    
  HE_DBUS_RXLEN   0x54            invalid dbus rx msg length   
  HE_DBUS_RXTO    0x55            dbus receive timeout         
  
  /* lbus driver error */
  HE_LBUS_DRVERR  0x60            lbus driver error            
  HE_LBUS_SM      0x61            lbus semaphore timeout       
  HE_LBUS_TXLEN   0x62            lbus transmit length         
  HE_LBUS_TXFULL  0x63            lbus transmit buffer full    
  
  /* gbus driver error */
  HE_GBUS_DRVERR  0x70            bus driver error            
  HE_GBUS_SM      0x71            gbus semaphore timeout       
  HE_GBUS_TXLEN   0x72            gbus mailbox full            
  HE_GBUS_TXFULL  0x73            gbus transmit buffer full    
  HE_GBUS_REENT   0x74            gbus int reentrance          
  HE_GBUS_BUSY    0x75            gbus busy                    
  HE_GBUS_FCODE   0x76            invalid gbus function code   
  HE_GBUS_RXLEN   0x77            invalid gbus rx mail len     
  
  Sub-category:
  ------------
  /* lbus driver error for HE_LBUS_DRVERR */
  DE_LBUS_RXERR   0x00000001      lbus rx error                
  DE_LBUS_RXLEN   0x00000002      lbus rx len error            
  DE_LBUS_RXCKSM  0x00000004      lbus rx checksum error       
  DE_LBUS_OVRUN   0x00000008      lbus rx overrun error        
  
  /* gbus driver error for HE_GBUS_DRVERR */
  DE_GBUS_BLOCKED 0x00000001       gbus blocked                 
  DE_GBUS_HIMB    0x00000002       dsp not reading hi pri mail caused by excessive signaling
  DE_GBUS_BUFERR  0x00008000       GBUS buffer allocation error 
  DE_GBUS_GET_BUFERR      0x00004000   GBUS buffer allocation error 
  DE_GBUS_FREE_BUFERR     0x00002000   GBUS buffer allocation error 
  DE_GBUS_SAVE_BUFERR     0x00001000   GBUS buffer allocation error 
  DE_DSP0_NORSP   0x00010000       dsp 0 not reading mail       
  DE_DSP1_NORSP   0x00020000       dsp 1 not reading mail       
  DE_DSP2_NORSP   0x00040000       dsp 2 not reading mail       
  DE_DSP3_NORSP   0x00080000       dsp 3 not reading mail      
  DE_DSP4_NORSP   0x00100000       dsp 4 not reading mail       
  DE_DSP5_NORSP   0x00200000       dsp 5 not reading mail       
  DE_DSP6_NORSP   0x00400000       dsp 6 not reading mail       
  DE_DSP7_NORSP   0x00800000       dsp 7 not reading mail       
  DE_DSP8_NORSP   0x01000000       dsp 8 not reading mail       
  DE_DSP9_NORSP   0x02000000       dsp 9 not reading mail       
  DE_DSPA_NORSP   0x04000000       dsp 10 not reading mail      
  DE_DSPB_NORSP   0x08000000       dsp 11 not reading mail      
  DE_DSPC_NORSP   0x10000000       dsp 12 not reading mail      
  DE_DSPD_NORSP   0x20000000       dsp 13 not reading mail      
  DE_DSPE_NORSP   0x40000000       dsp 14 not reading mail      
  DE_DSPF_NORSP   0x80000000       dsp 15 not reading mail      
  DE_ALL_NORSP    0xffff0000       all dsps not reading mail    
  
  /*----------------------------------------------------------------------*/
  
  List of 0xB errors Reported by DSP
  ----------------------------------
  
  Core image
  ----------
  MEM_WRITE_ERROR          0xBC   Memory Read Write Test Failed 
  CHECKSUM_ERROR           0xBD   Checksum does not match 
  
  HDLC & FAX IMAGE
  ----------
  FIFO_FULL                0xFF   Could not write to TX FIFO 
  FIFO_ALMOST_FULL         0xAF   Could not write to TX FIFO 
  INVALID_LENGTH_CMD       0xCD   Invalid length Command from CP 
  
  VOICE, G729, G729A IMAGE 
  -------------------------
  FIFO_FULL                0xFF   Could not write to TX FIFO 
  FIFO_ALMOST_FULL         0xAF   Could not write to TX FIFO 
  INVALID_LENGTH_CMD       0xCD   Invalid length Command from CP
  TNI_EXCEPTION_ERROR      0xE0   Exception message from codec 
  TNI_FATAL_FUNC           0xE1   Exception message from MXP
  

dspcderr コマンドの出力例

  UVM in Slot 21 : 440659 Rev EPH
  -----------------------------------
  Failure Type: Hardware Error
  Failure Time: March 12 2003 16:04:31 GMT
  
  Hardware Error Event:
  Hardware Error Event:
  0B 00 06 A8 01 26 0D
  |_____|________|____ DSP watchdog error 
  
  Error Fcode: Unknown
  Failure Type: Internal
  Processor Number: 01
  
  UVM in Slot 21 : 440659 Rev EPH
  -----------------------------------
  Failure Type: Hardware Error
  Failure Time: March 12 2003 16:16:31 GMT
  
  Hardware Error Event:
  0B 00 06 A8 01 07
  |_____|________|____ UVI download failure 
  
  Error Fcode: Unknown
  Failure Type: Internal
  Processor Number: 01
  

関連するシスコ サポート コミュニティ ディスカッション

シスコ サポート コミュニティは、どなたでも投稿や回答ができる情報交換スペースです。


関連情報