安全 : 思科内容安全管理设备

备份从一个思科M系列设备的数据库到另一个

2016 年 10 月 27 日 - 机器翻译
其他版本: PDFpdf | 英语 (2015 年 4 月 23 日) | 反馈

简介

本文描述如何备份数据库(DB)从一个思科M系列设备到另一个。

贡献用Fraidoon Sarwary, Cisco TAC工程师。

先决条件

要求

Cisco建议您有AsyncOS版本7.2和以上知识。

问题

开始DB的备份到一个附属M系列设备。

解决方案

这是需求,在您开始DB的备份到一个附属M系列设备前。

  • 两个M系列设备必须在同一个AsyncOS版本(7.2及以后只)
  • 目标M系列设备必须有备份的足够的磁盘空间。导航对系统管理>磁盘管理(请参阅关于怎样的线文档分配,如果一些磁盘被留下)。

在设置期间,如果没有足够的磁盘空间,您也许收到消息类似于此:

Verifying target machine for version compatibility and disk space...
Backup cannot be scheduled. Reason: There is not enough space for Centralized
Spam Quarantine, Centralized Email Tracking, Centralized Reporting. Please
increase disk allocation for these services on the target machine.


或者

Verifying target machine for version compatibility and disk space...
Backup cannot be scheduled. Reason: There is not enough space for Centralized
Web Tracking. Please increase disk allocation for these services on the target
machine.


检查磁盘配额如以前被提及在目标设备。

两安全管理伊莱克斯(SMAs),一个M650 (来源DB系统已命名m650sma.run)和目标M1050 (DB系统已命名m1050sma.run和IP 192.168.15.1)的目的地备份。

登陆对在来源M系列的CLI (在我们的测验sma1.example.com)并且输入这些命令:

sma1.example.com> backupconfig

Choose the operation you want to perform:
- VIEW - View scheduled backups
- VERIFY - Verify if backup can be scheduled to a remote machine
- SCHEDULE - Schedule backup to an appliance
- CANCEL - Cancel a scheduled backup
- STATUS - Show the status of a backup in progress.
- SETUP - Configure backup parameters.
[]> setup

Enter level of verbosity:
[0]> 0<this can be 0 or 3 0=lowest verbosity of backup logs and 3= highest>

Compression is desirable on slow connections, but will only slow down
 backup on
fast networks. Would you like to enable compression? [N]>   
<hit enter here to pick default withing the brackets [N]>

Choose the operation you want to perform:
- VIEW - View scheduled backups
- VERIFY - Verify if backup can be scheduled to a remote machine
- SCHEDULE - Schedule backup to an appliance
- CANCEL - Cancel a scheduled backup
- STATUS - Show the status of a backup in progress.
- SETUP - Configure backup parameters.
[]> verify

Enter the IP address of a machine to transfer data to.
[]> 192.168.15.1

Enter a name to identify this appliance
[]>sma2.example.com

Please enter username and password:
Username:
[]> admin

Password:
[]> <enter admin password for the target SMA>
Verifying target machine for version compatibility and disk space...
Backup can be scheduled on to 192.168.15.1.

Choose the operation you want to perform:
- VIEW - View scheduled backups
- VERIFY - Verify if backup can be scheduled to a remote machine
- SCHEDULE - Schedule backup to an appliance
- CANCEL - Cancel a scheduled backup
- STATUS - Show the status of a backup in progress.
- SETUP - Configure backup parameters.
[]> schedule

Enter the IP address of a machine to transfer data to.
[]> 192.168.15.1

Enter a name to identify this appliance
[]>sma2.example.com

Please enter username and password:
Username:
[]> admin

Password:
[]> <type the admin password on the target SMA>
Verifying target machine for version compatibility and disk space...
1. Set up a repeating backup schedule
2. Schedule a single backup
3. Start a single backup now
[1]>

1. Daily
2. Weekly
3. Monthly
[1]> 3

What day of the month would you like the backup to occur?
[1]>  <hit enter here>

What time of day would you like the backup to start?  Please enter in HH:MM
format.
[]> 02:00

Please enter a name for this backup job:
[]> weekly

Backup "weekly" has been scheduled successfully.

Choose the operation you want to perform:
- VIEW - View scheduled backups
- VERIFY - Verify if backup can be scheduled to a remote machine
- SCHEDULE - Schedule backup to an appliance
- CANCEL - Cancel a scheduled backup
- STATUS - Show the status of a backup in progress.
- SETUP - Configure backup parameters.
[]> view

Scheduled Backups:
# Name   IP              Schedule
= ====== =============== ================================
1 weekly To 192.168.15.1 on day 1 of every month at 02:00


Choose the operation you want to perform:
- VIEW - View scheduled backups
- VERIFY - Verify if backup can be scheduled to a remote machine
- SCHEDULE - Schedule backup to an appliance
- CANCEL - Cancel a scheduled backup
- STATUS - Show the status of a backup in progress.
- SETUP - Configure backup parameters.
[]> <hit enter until your back in CLI>

sma1.example.com> commit

Please enter some comments describing your changes:
[]> scheduled a weekly backup

Changes committed: Wed Mar 16 18:09:51 2011 GMT
sma1.example.com>


Document ID: 117840