安全 : Cisco IronPort Email 安全设备

如何能对某些域或主机限制在思科电子邮件安全工具(ESA)的交付速率?

2015 年 8 月 28 日 - 机器翻译
其他版本: PDFpdf | 英语 (2015 年 4 月 23 日) | 反馈

简介

本文如何描述对速率限制交付到某一域或主机。

贡献用斯蒂芬Fiebrandt和John Yu, Cisco TAC工程师。

解决方案

destconfig on命令CLI或目的地控制表邮件Policies选项在GUI可以用于配置限制在Cisco电子邮件安全工具的交付速率对特定域或主机。此选项有时推荐启用防止oveloading远程主机。

下面关于怎样的一CLI示例对域“example.com”限制速率交付。

mail.example.com> destconfig
There are currently 2 entries configured.
Choose the operation you want to perform:
- NEW - Create a new entry.
- EDIT - Modify an entry.
- DELETE - Remove an entry.
- DEFAULT - Change the default.
- PRINT - Display all entries.
- CLEAR - Remove all entries.
[]> new
Enter the domain you wish to limit.
[]> example.com
Do you wish to configure a concurrency limit for example.com? [Y]>
Enter the max concurrency limit for "example.com".
[500]> 100
Do you wish to apply a recipient limit to this domain? [N]> y
Enter the number of minutes used to measure the recipient limit.
[60]> 60
Enter the max number of recipients per 60 minutes for "example.com".
[]> 1000
Select how you want to apply the limits for example.com:
1. One limit applies to the entire domain example.com
2. Separate limit for each mail exchanger IP address
[1]>
Select how the limits will be enforced:
1. System Wide
2. Per Virtual Gateway(tm)
[1]>
Do you wish to apply a specific TLS setting for this domain? [N]>
Do you wish to apply a specific bounce verification address tagging setting for this domain? [N]>
Do you wish to apply a specific bounce profile to this domain? [N]>

There are currently 3 entries configured
Choose the operation you want to perform:
- NEW - Create a new entry.
- EDIT - Modify an entry.
- DELETE - Remove an entry.
- DEFAULT - Change the default.
- PRINT - Display all entries.
- CLEAR - Remove all entries.
[]>
mail.example.com> commit

相关的思科支持社区讨论

思科支持社区是您提问、解答问题、分享建议以及与工作伙伴协作的论坛。


Document ID: 118177