安全 : Cisco IronPort Web 安全设备

如何配置在Web安全工具的手工的DNS条目?

2016 年 10 月 24 日 - 机器翻译
其他版本: PDFpdf | 英语 (2015 年 8 月 22 日) | 反馈

问题

如何配置在思科Web安全工具的手工的DNS条目?

贡献用Josh Wolfer和Siddharth Rajpathak, Cisco TAC工程师。

环境

思科Web安全工具(WSA),所有AsyncOS版本 

在命令行界面(CLI)回车以下命令如显示:

WSA> dnsconfig

Choose the operation you want to perform:
- NEW - Add a new server.
- SETUP - Configure general settings.
- SEARCH - Configure DNS domain search list.
[]> localhosts  

Local IP to Host mappings:

Choose the operation you want to perform:
- NEW - Add new local IP to host mapping.
- DELETE - Delete an existing mapping.
[]> new

Enter the IP address of the host you are adding.
[]> 1.1.1.1

Enter the canonical host name and any additional aliases (separate values with spaces)
[]> example.com

Local IP to Host mappings:
1. 1.1.1.1 example.com

Choose the operation you want to perform:
- NEW - Add new local IP to host mapping.
- DELETE - Delete an existing mapping.
[]> <Press Enter twice to go back to the CLI prompt>

在CLI提示符,请使用CLI命令-进行-确认DNS配置更改。

注意:在CLI命令‘dnsconfig的’ localhosts选项是一个隐藏的选项。



Document ID: 118452