安全 : Cisco IronPort Email 安全设备

如何能配置循环法在思科电子邮件安全工具的样式出站连接?

2016 年 10 月 24 日 - 机器翻译
其他版本: PDFpdf | 英语 (2015 年 8 月 22 日) | 反馈

简介

本文在循环法在思科电子邮件安全工具(ESA)的样式出站连接描述如何平衡。

贡献用斯蒂芬Fiebrandt和斯科特勒德, Cisco TAC工程师。

如何能配置循环法在思科电子邮件安全工具(ESA)的样式出站连接?

使用smtproutes命令,在AsyncOS您能配置循环法交付。每个新连接
做将跳跃在配置的服务器之间。注意这只将平衡新连接
做对目标服务器电子邮件而不是数量发送在每条管道下。

mail.example.com> smtproutes
There are no routes configured.
Choose the operation you want to perform:
- NEW - Create a new route.
- IMPORT - Import new routes from a file.
[]> new
Enter the hostname for which you want to set up a permanent route.
Partial hostnames such as ".example.com" are allowed.
Use "ALL" for the default route.
[]> ironport.com
Enter the destination hosts, separated by commas, which you want mail for
ironport.com to be delivered.
Enter /dev/null by itself if you wish to discard the mail.
[]>192.168.0.1,192.168.0.2,192.168.0.3
Mapping for ironport.com to 192.168.0.1, 192.168.0.2, 192.168.0.3 created.
There are currently 1 routes configured.
Choose the operation you want to perform:
- NEW - Create a new route.
- DELETE - Remove a route.
- PRINT - Display all routes.
- IMPORT - Import new routes from a file.
- EXPORT - Export all routes to a file.
- CLEAR - Remove all routes.
[]>


Document ID: 118180