存储网络 : 光纤通道

Windows服务器2003年对SN5428配置示例的iSCSI主机

2016 年 10 月 24 日 - 机器翻译
其他版本: PDFpdf | 英语 (2016 年 4 月 25 日) | 反馈


目录


简介

在IP (iSCSI)驱动程序的思科小型计算机系统接口是iSCSI解决方案的关键组件。这些iSCSI驱动在服务器驻留,他们:

  • 截取iSCSI命令。

  • 封装命令到IP信息包。

  • 重定向他们对Cisco SN 5420、Cisco SN 5428、Cisco SN 5428-2或思科MDS/IPS-8。

本文为Windows服务器2003年iSCSI主机提供配置示例给SN5428。

先决条件

要求

尝试进行此配置之前,请确保满足以下要求:

  • 安装是兼容对您的Microsoft Windows版本的iSCSI驱动。在Microsoft Windows 2000, XP或者2003年参考驱动程序的多数当前版本的Cisco iSCSI驱动(仅限注册用户)网页。文件的名字列表中,比如Cisco iSCSI Driver Version (version number) for Win2k 。

  • Microsoft Windows的iSCSI驱动2003年需要Microsoft Windows服务器2003企业版、标准版或者网上版本。

使用的组件

本文档中的信息基于以下软件和硬件版本:

  • 主机与Microsoft Windows服务器2003标准版

    /image/gif/paws/45920/2003_iscsi-a.gif

  • Microsoft Windows服务器2003的Cisco iSCSI驱动3.1.2。您能看到iSCSI驱动版本在思科iSCSI Config窗口的左下。

    /image/gif/paws/45920/2003_iscsi-b.gif

  • Cisco SN 5428用软件版本3.3.2-K9

    *[rita]# show ver 
    Cisco SN 5428-K9 Storage Router 
             CLI Version: 2.1 
           iSCSI Version: 0/2 (Min/Max) 
        System Bootstrap: 3.3.2-K9 
        Operating System: 3.3.2-K9 
          Switch Version: V1.4.0.43-0 
             Application: 3.3.2-K9 
              Web Server: R6_1_0 
                 OpenSSH: 3.4p1 
                 OpenSSL: 0.9.6e 
                    Zlib: 1.1.4 
    
    Copyright (c) 1986-2002 by Cisco Systems, Inc
    

本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始(默认)配置。如果您使用的是真实网络,请确保您已经了解所有命令的潜在影响。

规则

有关文档规则的详细信息,请参阅 Cisco 技术提示规则

背景信息

路由提供有访问的iSCSI IP主机对光纤信道(FC)存储设备,好象存储设备直接地附加到主机。对设备访问的管理主要在SN 5428存储路由器。iSCSI目标是对于一个组物理存储设备的任意名称。iSCSI目标被创建并且被映射到附在SN 5428上的物理存储设备。存储路由器提交iSCSI目标到IP主机,好象物理存储设备直接地附加到主机。存储设备不知道与iSCSI路由的每台IP主机。存储设备知道SN5428并且回应,好象它一台FC主机。iSCSI路由包括路由iSCSI请求和答复在主机在IP网络和FC存储设备之间。

每一个需要通过SN 5428存储路由器IP接入方式存储的主机,需要安装有兼容的iSCSI驱动程序。当您使用iSCSI协议时, iSCSI驱动允许IP主机传输iSCSI请求和答复在IP网络。iSCSI驱动看来是一iSCSI或FC驱动程序一个周边信道的在主机从主机操作系统(OS)的角度。iSCSI路由包括这些主要操作:

  • 传输iSCSI请求和答复在一个IP网络在主机和SN 5428存储路由器之间。

  • 路由iSCSI请求和答复在主机在IP网络和FC存储设备之间。

  • 传输iSCSI请求和答复在SN 5428存储路由器和FC存储设备之间。

iSCSI路由在SN 5428存储路由器发生通过物理存储设备映射到iSCSI目标。您能映射iSCSI目标到多个物理设备。iSCSI目标总是包含至少一个逻辑单元编号(LUN)。在iSCSI目标上的每个LUN映射到物理存储器目标上的单个LUN 。

您能选择目标和LUN或只通过目标映射存贮映射的。目标和LUN映射将iSCSI目标和LUN组合映射到物理存储器目标和LUN组合中。Target-only映射映射一个iSCSI目标到物理存储器目标及其LUN。

使用目标和LUN映射, iSCSI目标名称和iSCSI LUN编号指定并且被映射对物理存储器地址为一个这些LUN :

  • WWPN + LUN (全世界端口名+ LUN)组合

  • LUN ID (唯一LUN标识符)

  • LUN序列号

LUN使可用作为iSCSI LUN并且用指定的iSCSI LUN编号编号。例如,如果作为数据库指定的iSCSI目标和iSCSI LUN和LUN 9被映射对物理存储器地址WWPN 3100112233445566, LUN 12LUN 12是可用的作为一iSCSI LUN。iSCSI驱动看到有作为LUN识别的一iSCSI LUN的iSCSI数据库目标9。iSCSI LUN出现作为一存储设备到主机。

iSCSI目标名称指定并且被映射对一个WWPN存储设备仅控制器的物理存储器地址有只通过目标映射的。存贮控制器中任何已有的LUN都可以用作iSCSI LUNs,并且与存贮控制器中的LUN编号相同。例如, LUN 0-2变得可用作为三iSCSI LUN,如果作为Webserver2000指定的iSCSI目标被映射对物理存储器地址WWPN 3100112233445577,并且LUN 0-2是可用的在该控制器。iSCSI驱动看到iSCSI Webserver2000目标作为有三iSCSI LUN 0, LUN 1和LUN的2.一个控制器。每iSCSI LUN出现作为一分开的存储设备到主机。

iSCSI路由的访问在IP主机和存储路由器被控制。iSCSI驱动在IP主机配置用路由在主机是传输iSCSI请求和答复的存储路由器的iSCSI的千兆以太网(GE) IP地址实例。访问在存储路由器被控制到访问列表和主机的VLAN ID (VID)编号。访问在SN5428可以进一步被控制通过验证。

配置

本部分提供有关如何配置本文档所述功能的信息。

注意: 有关本文档所用命令的详细信息,请使用命令查找工具仅限注册用户)。

网络图

本文档使用以下网络设置:

/image/gif/paws/45920/2003_iscsi-c.gif

配置

本文档使用以下配置:

Vuk (Windows服务器2003)
完成这些初始配置任务:
  • 设置的SN5428系列系统的iSCSI目标IP地址驱动程序访问。
  • 设置iSCSI目标认证用户名和密码。
  • 保存iSCSI目标配置并且设置驱动程序启动类型。
完成这些步骤配置驱动程序:
  1. 作为有管理员权限的一个用户登录到计算机。
  2. 选择Start > Settings > Control Panel和双击iSCSI设置。iSCSI设置程序造成成功2000/XP/2003对话框的思科iSCSI设置显示。
  3. 完成这些步骤配置路由在SN5428系列系统的iSCSI的IP地址实例在Win 2000对话框的Cisco iSCSI设置:
    1. 输入路由在SN5428系列系统的iSCSI的IP地址实例在目标主机主机名/IP地址文本框。IP地址是在本例中配置示例的10.48.69.202。
    2. 单击 Add。IP地址显示在目标主机主机名/IP地址文本框之下。

      /image/gif/paws/45920/initialconf.gif

  4. 选择保存>退出
  5. 重新启动计算机。

瑞塔(SN5428)
! ACCESSLIST 
!
accesslist vuk_win2003
accesslist vuk_win2003 10.48.69.241/255.255.255.255 

!--- An access list has been created to allow vuk only.

! SCSIROUTER
!
scsirouter winser2003 

!--- An iSCSI routing instance winser2003 has been created for this setup.

scsirouter winser2003 description "Microsoft Windows Server 2003"
scsirouter winser2003 authentication "none"
scsirouter winser2003 username "none"
scsirouter winser2003 password "none"
scsirouter winser2003 primary "none"
scsirouter winser2003 reserveproxy disable
scsirouter winser2003 failover primary none
scsirouter winser2003 failover secondary none
scsirouter winser2003 lun reset no



!--- Interface (ge1) assigned to iSCSI instance winser2003.
!--- IP hosts use 10.48.69.202 to access the iSCSI routing instance.


scsirouter winser2003 serverIf ge1 10.48.69.202/255.255.255.192    



!--- Target emc-lun0-lun1 is an example of target-and-LUN 
!--- mapping with LUN ID addressing.


scsirouter winser2003 target emc-lun0-lun1 lun 0 lunid "600601608802a82bda05b6a9b69d7b00"
scsirouter winser2003 target emc-lun0-lun1 lun 1 lunid "600601608802a82b6a660d74cb33886c"
scsirouter winser2003 target emc-lun0-lun1 description "emc-lun0-lun1"
scsirouter winser2003 target emc-lun0-lun1 enable
scsirouter winser2003 target emc-lun0-lun1 accesslist "vuk_win2003" rw
scsirouter winser2003 target emc-lun0-lun1 accesslist "none" ro
scsirouter winser2003 target emc-lun0-lun1 maxcmdqueuedepth "0"
scsirouter winser2003 target emc-lun0-lun1 trespass



!--- Target emc-lun3-lun33 is an example of target-and-LUN 
!--- mapping with WWPN addressing.
!--- LUN 3 has mapped to LUN 3 on EMC, and LUN 4 has mapped LUN 33 on EMC.


scsirouter winser2003 target emc-lun3-lun33 lun 3 wwpn "500601608802a82b" lun "3"
scsirouter winser2003 target emc-lun3-lun33 lun 4 wwpn "500601608802a82b" lun "33"
scsirouter winser2003 target emc-lun3-lun33 description "emc-lun3-lun33"
scsirouter winser2003 target emc-lun3-lun33 enable
scsirouter winser2003 target emc-lun3-lun33 accesslist "any" rw
scsirouter winser2003 target emc-lun3-lun33 accesslist "none" ro
scsirouter winser2003 target emc-lun3-lun33 maxcmdqueuedepth "0"
scsirouter winser2003 target emc-lun3-lun33 trespass



!--- Target seagate is an example of target-only mapping with WWPN addressing. 


scsirouter winser2003 target seagate wwpn "21000004cfdb3ea7"
scsirouter winser2003 target seagate description "apcon1"
scsirouter winser2003 target seagate enable
scsirouter winser2003 target seagate accesslist "any" rw
scsirouter winser2003 target seagate accesslist "none" ro
scsirouter winser2003 target seagate maxcmdqueuedepth "0"
no scsirouter winser2003 target seagate trespass
!
! SYSTEM
!
hostname rita
!
! Mgmt Port
!
interface mgmt ip-address 10.48.69.148/255.255.255.192
!
! GE
!
interface ge1 autonegotiation autodetect
interface ge1 mtusize 1500
interface ge1 vlan enable
!
! GE
!
interface ge2 autonegotiation autodetect
interface ge2 mtusize 1500
interface ge2 vlan enable
!
! ROUTES
!
ip default-gateway 10.48.69.129
!
! RIP
!
no ip rip enable
ip rip timers invalid 180
!
! ADMIN LOGIN
!
admin password <password>
!
! MONITOR LOGIN
!
monitor password <password>
!
! SNTP
!
clock timezone GMT
!
! SNMP
!
snmp-server community public ro
snmp-server community private rw
no snmp-server host all traps 
no snmp-server sendauthtraps
snmp-server linkupdown mgmt
snmp-server linkupdown ge1
snmp-server linkupdown ge2
snmp-server linkupdown fc1
snmp-server linkupdown fc2
snmp-server linkupdown fc3
snmp-server linkupdown fc4
snmp-server linkupdown fc5
snmp-server linkupdown fc6
snmp-server linkupdown fc7
snmp-server linkupdown fc8
!
! TELNET 
!
no session-timeout
!
! SSH 
!
ssh enable
!
! HA
!
! ha configuration standalone
!
! LOGGING ROUTE FACILITY
!
logging level notice from all to all
logging level info from all to logfile 
!
! RESTRICT
!
restrict mgmt ftp
no restrict mgmt telnet
no restrict mgmt http
no restrict mgmt snmp
restrict mgmt ssl
no restrict mgmt ssh
!
restrict ha ftp
restrict ha telnet
no restrict ha http
restrict ha snmp
restrict ha ssl
restrict ha ssh
!
restrict ge1 ftp
restrict ge1 telnet
restrict ge1 http
restrict ge1 snmp
restrict ge1 ssl
restrict ge1 ssh
!
restrict ge2 ftp
restrict ge2 telnet
restrict ge2 http
restrict ge2 snmp
restrict ge2 ssl
restrict ge2 ssh
!
!
! CDP
!
cdp enable
cdp timer 60
cdp interface mgmt enable
cdp interface ge1 enable
cdp interface ge2 enable
!
! FC SWITCH
!
fcswitch ratov 10000
fcswitch edtov 2000
fcswitch dstov 5000
fcswitch fstov 1000
fcswitch zoning default All
fcswitch zoning autosave enable
fcswitch zoning merge SW2
fcswitch domainid 1 force
no fcswitch domainid lock enable
fcswitch interop-credit 12
!
! FC ZONE ALIAS
!
fcalias iscsi
fcalias iscsi member wwpn 280000059ba695e0 

!--- Initiator WWPN1.

fcalias iscsi member wwpn 290000059ba695e0 

!--- Initiator WWPN2.



!--- The LUN mapping and LUN masking on the storage device 
!--- must be done with WWPN1 and WWPN2.

!
! FC ZONE
!
zone jbod 

!--- Creates a zone for seagate.

zone jbod member wwpn 21000004cfdb3ea7
zone jbod member fcalias iscsi
zone spa 

!--- Creates a zone for EMC Clariion.

zone spa member wwpn 500601608802a82b
zone spa member fcalias iscsi
!
! FC ZONE SET
!
zoneset iscsidoc 

!--- Creates a zoneset iscsidoc with members spa and jbod.

zoneset iscsidoc zone jbod
no zoneset iscsidoc enable
zoneset iscsidoc zone spa
no zoneset iscsidoc enable
!
! FC PORTS
...
interface fc5 enable
interface fc5 ms-enable enable
no interface fc5 al-fairness enable
interface fc5 fan-enable enable
interface fc5 ext-credit 0
interface fc5 mfs-bundle enable timeout 10
interface fc5 linkspeed auto
interface fc5 type gl-port
!
interface fc6 enable
interface fc6 ms-enable enable
no interface fc6 al-fairness enable
interface fc6 fan-enable enable
interface fc6 ext-credit 0
interface fc6 mfs-bundle enable timeout 10
interface fc6 linkspeed auto
interface fc6 type gl-port
!
interface fc7 enable
interface fc7 ms-enable enable
no interface fc7 al-fairness enable
interface fc7 fan-enable enable
interface fc7 ext-credit 0
interface fc7 mfs-bundle enable timeout 10
interface fc7 linkspeed auto
interface fc7 type gl-port
!

验证

使用本部分可确认配置能否正常运行。

命令输出解释程序仅限注册用户)(OIT) 支持某些 show 命令。使用 OIT 可查看对 show 命令输出的分析。

  • show scsirouter winser2003 —显示为指定的winser2003 iSCSI配置的参数路由实例。

  • show devices —显示所有iSCSI设备。

  • 存储路由器FC的show fcswitch nameserver全显示全局配置信息建立接口。

  • show scsirouter winser2003 connection —显示iSCSI winser2003 iSCI会话的发起者信息。

  • show scsirouter winser2003 stats —显示访问和连接信息。

  • show scsirouter winser2003 host —显示主机信息。

  • show scsirouter winser2003 host stat —显示主机统计信息。

  • show scsirouter winser2003 target all stats —显示关于所有目标的统计信息。

  • show ip tcp —显示TCP会话。

  • show int ge 1 —显示GE接口。

  • show ip route -显示Ip route信息。

  • show system —显示系统信息、接口、IP地址、软件版本和硬件型号。

故障排除

使用本部分可排除配置故障。

此故障排除信息使用这些配置:

从Vuk (Windows服务器显示2003)
点击在思科iSCSI Config窗口的状态检查主机是否顺利地登录iSCSI目标。发出netstat - an|在line命令的find/i已有命令看到在10.48.69.202之间的已建立TCP会话。

/image/gif/paws/45920/2003_iscsi-d.gif

用鼠标右键单击在桌面的在计算机管理器的我的电脑图标和双击发现新的磁盘。单击控制台结构树的设备管理器系统工具下

2003_iscsi-e.gif

用鼠标右键单击在桌面和双击计算机管理器的我的电脑图标管理存储设备。单击在控制台结构树的磁盘管理存储设备下

/image/gif/paws/45920/2003_iscsi-f.gif

从瑞塔(SN5428)显示
*[rita]#show system
              System Name: rita
      System Deployed For: SCSI routing
        Software Capacity: 59392.0 KB
      Free Software Space: 30705.0 KB
   Configuration Capacity: 14464.0 KB
 Free Configuration Space: 13800.0 KB
             Log Capacity: 29056.0 KB
           Free Log Space: 28358.0 KB
         Software Version: 3.3.2-K9
               Last Reset: Mon Sep 29 16:30:52 GMT 2003
             Current Time: Sun Oct  5 12:24:25 GMT 2003
                Time Zone: GMT
               NTP Server: none
              Name Server: none
   Telnet session timeout: none

                      Model Number  Rev  Serial Number  Part Number
System                SN 5428-K9    00   Unit SN        800part_number
Processor             Rainmaker     02   SAD061200UJ    73-7996-03

Device      IP/Netmask                      MAC
lo0         127.0.0.1/8                    
mgmt        10.48.69.148/26                 00:05:9b:a6:95:e0
ge1         10.48.69.202/26                 02:02:3d:30:45:ca
ge2     

*[rita]#show fcswitch
Global attributes                     Value
------------------------------------  -----
Domain ID                             1
Domain ID lock                        disabled
Active Zoneset                        iscsidoc
Zoning Merge                          SW2
Zoning Default                        All
Zoning Autosave                       enabled
Distributed Services timeout (dstov)  5000
Fabric Services timeout (fstov)       1000
Error Detect timeout (edtov)          2000
Resource Allocation timeout (ratov)   10000
Buffer to Buffer Credit (interop)     12
Initiator WWPN1                       280000059ba695e0
Initiator WWPN2                       290000059ba695e0

*[rita]#show fcswitch nameserver brief
Port Id Port Type Port Number     Port WWN          Port IP Address  
------- -------   --------------- ----------------- -----------------
010000  N         0               280000059ba695e0  00000000                       
01051e  NL        5               21000004cfdb3ea7  00000000                       
010700  N         7               500601608802a82b  00000000                       
010f00  N         15              290000059ba695e0  00000000                       

4 entries found

*[rita]#show fcswitch nameserver all
Port Id          010000
Port Type        N
Port Number      0
Port WWN         280000059ba695e0
Port IP Address  00000000
Sym Port Name    
Sym Node Name    
Node WWN         100000059ba695e0
Node IP Address  00000000
Fabric Port Name 200000059ba695e1
Class of Service 3
FC-4 Types       FCP
FC-4 Description (NULL)

Port Id          01051e
Port Type        NL
Port Number      5
Port WWN         21000004cfdb3ea7
Port IP Address  00000000
Sym Port Name    
Sym Node Name    
Node WWN         20000004cfdb3ea7
Node IP Address  00000000
Fabric Port Name 200500059ba695e1
Class of Service 3
FC-4 Types       FCP
FC-4 Description SEAGATE  ST336753FC       (Rev. 0003)

Port Id          010700
Port Type        N
Port Number      7
Port WWN         500601608802a82b
Port IP Address  00000000
Sym Port Name    
Sym Node Name    
Node WWN         500601601102a82b
Node IP Address  00000000
Fabric Port Name 200700059ba695e1
Class of Service 3
FC-4 Types       FCP
FC-4 Description DGC      RAID 0           (Rev. 0632)

Port Id          010f00
Port Type        N
Port Number      15
Port WWN         290000059ba695e0
Port IP Address  00000000
Sym Port Name    
Sym Node Name    
Node WWN         100000059ba695e0
Node IP Address  00000000
Fabric Port Name 200f00059ba695e1
Class of Service 3
FC-4 Types       FCP
FC-4 Description (NULL)

4 entries found

*[rita]#show fcswitch linkstate database
Local Node WWN       100000059ba695e1
Local Port           0
Local Port WWN       200000059ba695e1
Remote Node WWN      100000059ba695e0
Remote Port          ffffffff
Remote Port WWN      280000059ba695e0
Remote Agent Address 00000000
Remote Agent Type    0
Remote Agent Port    0
Remote Unit Type     Unknown
Remote Connection Id 010000

Local Node WWN       100000059ba695e1
Local Port           15
Local Port WWN       200f00059ba695e1
Remote Node WWN      100000059ba695e0
Remote Port          ffffffff
Remote Port WWN      290000059ba695e0
Remote Agent Address 00000000
Remote Agent Type    0
Remote Agent Port    0
Remote Unit Type     Unknown
Remote Connection Id 010f00

Local Node WWN       100000059ba695e1
Local Port           5
Local Port WWN       200500059ba695e1
Remote Node WWN      20000004cfdb3ea7
Remote Port          ffffffff
Remote Port WWN      21000004cfdb3ea7
Remote Agent Address 00000000
Remote Agent Type    0
Remote Agent Port    0
Remote Unit Type     Unknown
Remote Connection Id 00001e

Local Node WWN       100000059ba695e1
Local Port           7
Local Port WWN       200700059ba695e1
Remote Node WWN      500601601102a82b
Remote Port          ffffffff
Remote Port WWN      500601608802a82b
Remote Agent Address 00000000
Remote Agent Type    0
Remote Agent Port    0
Remote Unit Type     Unknown
Remote Connection Id 010700

4 entries found

*[rita]#show devices
Fabric Attached Devices detected
Interface WWPN             PortId   Device Type     Lun   Lunid Type        Lunid
--------- ---------------- -------- --------------- ----- ----------------- -----
fc7       500601608802a82b 0x10700  Disk            0     IEEE Reg Extended 600601608802a82bda05b6a9b69d7b00
fc7       500601608802a82b 0x10700  Disk            1     IEEE Reg Extended 600601608802a82b6a660d74cb33886c
fc7       500601608802a82b 0x10700  Disk            2     IEEE Reg Extended 600601608802a82bec815ba2c4430d8a
fc7       500601608802a82b 0x10700  Disk            3     IEEE Reg Extended 600601608802a82be047b3be3b00e0d5
fc7       500601608802a82b 0x10700  Disk            4     IEEE Reg Extended 600601608802a82b00515b7f3d9a7bce
fc7       500601608802a82b 0x10700  Disk            5     IEEE Reg Extended 600601608802a82babb1ae8059c0fcf0
fc7       500601608802a82b 0x10700  Disk            6     IEEE Reg Extended 600601608802a82bad9158afd2fdc747
fc7       500601608802a82b 0x10700  Disk            7     IEEE Reg Extended 600601608802a82bb1efe76c445c1697
fc7       500601608802a82b 0x10700  Disk            8     IEEE Reg Extended 600601608802a82b844f0960301efc50
fc7       500601608802a82b 0x10700  Disk            9     IEEE Reg Extended 600601608802a82baa6de20ece7acc21
fc7       500601608802a82b 0x10700  Disk            10    IEEE Reg Extended 600601608802a82b5b6667896cf2d156
fc7       500601608802a82b 0x10700  Disk            11    IEEE Reg Extended 600601608802a82ba932bd044abb3d9b
fc7       500601608802a82b 0x10700  Disk            12    IEEE Reg Extended 600601608802a82bcdd996f7573f070c
fc7       500601608802a82b 0x10700  Disk            13    IEEE Reg Extended 600601608802a82b0ce5ba3968cad6f0
fc7       500601608802a82b 0x10700  Disk            14    IEEE Reg Extended 600601608802a82b606eee7698fcab97
fc7       500601608802a82b 0x10700  Disk            15    IEEE Reg Extended 600601608802a82b8b58807b12fb6b12
fc7       500601608802a82b 0x10700  Disk            16    IEEE Reg Extended 600601608802a82ba12f6db0c3d6c246
fc7       500601608802a82b 0x10700  Disk            17    IEEE Reg Extended 600601608802a82b2c48c474254b26dd
fc7       500601608802a82b 0x10700  Disk            32    IEEE Reg Extended 600601608802a82bba186a4022409475
fc7       500601608802a82b 0x10700  Disk            33    IEEE Reg Extended 600601608802a82b74d2429e318dff86
fc5       21000004cfdb3ea7 0x1051e  Disk            0     IEEE Extended     20000004cfdb3ea7

Lun Description Table
Interface WWPN             Lun   Capacity Vendor       Product      Serial
--------- ---------------- ----- -------- ------------ ------------ ------
fc7       500601608802a82b 0     1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 1     1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 2     1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 3     1GB      DGC          RAID         f60004202091
fc7       500601608802a82b 4     1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 5     1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 6     1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 7     1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 8     1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 9     1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 10    1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 11    1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 12    1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 13    1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 14    1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 15    1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 16    1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 17    1023MB   DGC          RAID         f60004202091
fc7       500601608802a82b 32    4GB      DGC          RAID         f60004202091
fc7       500601608802a82b 33    2GB      DGC          RAID         f60004202091
fc5       21000004cfdb3ea7 0     34GB     SEAGATE      ST336753FC   3HX00Q2600007326JFF3

*[rita]#show scsirouter winser2003
SCSI Router Information
Status Codes: A=active, I=inactive, C=create failed, D=not enabled, S=slave
                          CDB   Reserve  Pass Lun  
Router               Stat Retry Proxy    Thru Reset Description
-------------------- ---- ----- -------- ---- ----- -----------
winser2003           A    6     disabled no   no    Microsoft Windows Server 2003

SCSI Router Authentication Information
Router               Authentication  Username        Password
-------------------- --------------- --------------- --------
winser2003           none            none            none    

Router     ServerIf   Vlan Vid IP/Netmask                       Secondary  TCP Port SLP
---------- ---------- -------- -------------------------------- ---------- -------- ---
winser2003 ge1                 10.48.69.202/26                  none       3260     ON

Target Attribute Information
                                     Accesslist Accesslist                               
Router     Target           Status   Read-Write Read-Only  Profile CRC        Description
---------- ---------------- -------- ---------- ---------- ------- ---------- -----------
winser2003 seagate          enabled  any        none       High    prefer-off apcon1
winser2003 emc-lun0-lun1    enabled  vuk_win2003 none       High    prefer-off emc-lun0-lun1
winser2003 emc-lun3-lun33   enabled  any        none       High    prefer-off emc-lun3-lun33

Target Mapping Information
Router     Target           Mapping    iSCSI Name 
---------- ---------------- ---------- -----------
winser2003 seagate          Tgt        iqn.1987-05.com.cisco:00.f2ad57bee553.seagate
winser2003 emc-lun0-lun1    Lun-lunid  iqn.1987-05.com.cisco:00.7cdb6d7cdb31.emc-lun0-lun1
winser2003 emc-lun3-lun33   Lun-wwpn   iqn.1987-05.com.cisco:00.438daf438d67.emc-lun3-lun33

Targets - Target Mapped
Router     Target           WWPN Primary     WWPN Secondary  
---------- ---------------- ---------------- ----------------
winser2003 seagate          21000004cfdb3ea7                 

Targets - Lun Mapped via Lunid
Router     Target           Lun   Lunid           
---------- ---------------- ----- ----------------
winser2003 emc-lun0-lun1    0     600601608802a82bda05b6a9b69d7b00
winser2003 emc-lun0-lun1    1     600601608802a82b6a660d74cb33886c

Targets - Lun Mapped via WWPN
Router     Target           Lun   WWPN Primary     Lun   WWPN Secondary   Lun  
---------- ---------------- ----- ---------------- ----- ---------------- -----
winser2003 emc-lun3-lun33   3     500601608802a82b 3                           
winser2003 emc-lun3-lun33   4     500601608802a82b 33    

*[rita]#show scsirouter winser2003 host

  router        host         name      logins  active    last login     last disconnect
winser2003  10.48.69.241  VUK-WIN2003      4       4   Oct 05 11:14:39                 

1 host listed

*[rita]#show scsirouter winser2003 stats
                           Logins   Logins Target Access  Authentication
Router     Started         Accepted Active Failures       Failures      
---------- --------------- -------- ------ -------------- --------------
winser2003 Oct 05 11:14:32 4        4      0              0             
1 scsirouter listed

*[rita]#show scsirouter winser2003 host stats

winser2003 host 10.48.69.241 alias "VUK-WIN2003"
Login info:
  loginsActive = 4
  lastLoginTime: Sun Oct  5 11:14:39 GMT 2003
  loginsTerminated = 0
  lastLoginTerminatedTime: 
  loginsFailed = 0
  lastLoginFailedTime: 
  loginsDiscovery = 1
  loginsNormal = 3
 stats:

           RECEIVE               SEND
       OK         ERROR
  0000010274                0000011971  total msgs
  0000000261                0000000261  no-op msgs
  0000000127                0000000127  ping msgs/rsps
  0000007202  0000000000    0000007202  SCSI cmd msgs/rsps
  0000002676  0000000000    0000004373  SCSI data msgs
  0000000000  0000000000    0000000000  task mgt msgs/rsps
  0000000008  0000000000    0000000008  login msgs/rsps
  0000000000  0000000000    0000000000  text msgs/rsps
  0000000000                0000000000  invalid msgs/rsps
                            0000000000  RTT msgs
                            0000000000  async msgs

  bytes rcvd 0000000006ff7800
  discarded          00000000
  bytes sent 00000000075df218
1 host listed
*[rita]# show scsirouter winser2003 connection

CRC values (Header / Data)
  N = No CRC negotiated
  H = Hardware CRC
  S = Software CRC

  router    sid cid      host:port          login        ver  crc  rtt  target  access
winser2003  1   71   10.48.69.241:1026  Oct 05 11:14:39   0   N/N   on       
winser2003  3   72   10.48.69.241:1033  Oct 05 11:14:39   0   N/N  off  seagate     RW
winser2003  4   73   10.48.69.241:1034  Oct 05 11:14:39   0   N/N  off  emc-lun0-lun1     RW
winser2003  2   74   10.48.69.241:1035  Oct 05 11:14:39   0   N/N  off  emc-lun3-lun33     RW

4 connections listed
*[rita]#show scsirouter winser2003 target all stats
winser2003 target seagate:

        RECEIVED           TRANSMITTED
    count      error      count      error

0000004082            0000002918             Messages
0000002918 0000000000 0000002918 0000000001  SCSI cmd/resp
0000000000 0000000000 0000000000             task mgt
0000000001 0000000000 0000000000             login cmd
0000000000                                   logout
                      0000000000             async event
0000001164            0000001721             data msg

000000000419c000 bytes received
        00000000 discarded
0000000004315c48 bytes transmitted

 target emc-lun0-lun1:

        RECEIVED           TRANSMITTED
    count      error      count      error

0000002742            0000002008             Messages
0000002008 0000000000 0000002008 0000000002  SCSI cmd/resp
0000000000 0000000000 0000000000             task mgt
0000000001 0000000000 0000000000             login cmd
0000000000                                   logout
                      0000000000             async event
0000000734            0000001222             data msg

0000000000f82000 bytes received
        00000000 discarded
0000000001031840 bytes transmitted

 target emc-lun3-lun33:

        RECEIVED           TRANSMITTED
    count      error      count      error

0000003054            0000002276             Messages
0000002276 0000000000 0000002276 0000000002  SCSI cmd/resp
0000000000 0000000000 0000000000             task mgt
0000000001 0000000000 0000000000             login cmd
0000000000                                   logout
                      0000000000             async event
0000000778            0000001430             data msg

0000000001ed9800 bytes received
        00000000 discarded
0000000002297d90 bytes transmitted


totals for all targets:

        RECEIVED           TRANSMITTED
    count      error      count      error

0000009878            0000007202             Messages
0000007202 0000000000 0000007202 0000000005  SCSI cmd/resp
0000000000 0000000000 0000000000             task mgt
0000000003 0000000000 0000000000             login cmd
0000000000                                   logout
                      0000000000             async event
0000002676            0000004373             data msg

0000000006ff7800 bytes received
        00000000 discarded
00000000075df218 bytes transmitted

*[rita]#show zoneset brief
Zoneset Name         Active Member Count
-------------------- ------ ------------
iscsidoc             true   4

*[rita]#show zoneset iscsidoc
Zone Name            Member Count
-------------------- ------------
spa                  2
jbod                 2

Zone: spa
  wwpn: 500601608802a82b
  fcalias: iscsi
    wwpn: 280000059ba695e0
    wwpn: 290000059ba695e0
Zone: spb
Zone: jbod
  wwpn: 21000004cfdb3ea7
  fcalias: iscsi
    wwpn: 280000059ba695e0
    wwpn: 290000059ba695e0

*[rita]#show interface ge1
Operational Data
Interface Stat IP/Netmask               MAC          Options
--------- ---- ------------------------ ------------ -------
ge1       up   10.48.69.202/ffffffc0    02023d3045ca type Gigabit Ethernet
                                                     mtusize 1500
                                                     speed 1000000000
                                                     flags UP BRDCST RUNNING MLTCST
                                                     signal signal detect
                                                     duplex full
                                                     auto-negotiate complete
                                                     flow control full
                                                     SFPVendor CISCO-AGILENT   
                                                     SFPVendorID A00258957       
                                                     SFPPartNumber QFBR-5790L      
                                                     SFPRev     -5790L      


Configuration Data
Interface MTU Size   AutoNegotiation  Vlan     IP/Netmask               Secondary
--------- ---------- ---------------- -------- ------------------------ ---------
ge1       1500       autodetect       enabled                           None

*[rita]#show ip tcp
Active Internet connections (including servers)
PCB      Proto Recv-Q Send-Q  Local Address      Foreign Address    (state)
-------- ----- ------ ------  ------------------ ------------------ -------
db93608  TCP        0      0  10.48.69.202.3260  10.48.69.241.1035  ESTABLISHED
db937e8  TCP        0      0  10.48.69.202.3260  10.48.69.241.1034  ESTABLISHED
db932e8  TCP        0      0  10.48.69.202.3260  10.48.69.241.1033  ESTABLISHED
db94008  TCP        0      0  10.48.69.202.3260  10.48.69.241.1026  ESTABLISHED
db92f28  TCP        0      0  10.48.69.202.427   0.0.0.0.0          LISTEN
db925c8  TCP        0      0  0.0.0.0.443        0.0.0.0.0          LISTEN
db92528  TCP        0      0  0.0.0.0.80         0.0.0.0.0          LISTEN
db92488  TCP        0      0  0.0.0.0.23         0.0.0.0.0          LISTEN
db923e8  TCP        0      0  0.0.0.0.22         0.0.0.0.0          LISTEN
db92028  TCP        0      0  127.0.0.1.9353     0.0.0.0.0          LISTEN
db92208  TCP        0      0  10.48.69.148.427   0.0.0.0.0          LISTEN
db920c8  TCP        0      0  127.0.0.1.427      0.0.0.0.0          LISTEN
db91a88  TCP        0      0  0.0.0.0.3260       0.0.0.0.0          LISTEN
db918a8  TCP        0      0  0.0.0.0.21         0.0.0.0.0          LISTEN
*[rita]#show ip route
Codes: C - connected, S - static, R - RIP

S    0.0.0.0/0 [1/0] via 10.48.69.129, mgmt
C    10.48.69.128/26 is directly connected, mgmt
C    10.48.69.192/26 is directly connected, ge1
C    127.0.0.1/8 is directly connected, lo0


相关信息


Document ID: 45920