安全与 VPN : 远程验证拨入用户服务 (RADIUS)

使用RADIUS,分配PPP会话和空闲超时

2015 年 8 月 28 日 - 机器翻译
其他版本: PDFpdf | 英语 (2015 年 4 月 23 日) | 反馈


目录


简介

此配置合并一个Windows 95/98/NT客户端用在模拟线路拨到接入服务器的调制解调器。用户登录由在路由器的以太网段的RADIUS服务器验证并且授权。在本文的Cisco Secure UNIX和Windows配置文件使用标准的互联网工程任务组(IETF)属性会话和空闲超时。值是以秒钟。

本文在NAS不提供逐步配置说明为拨号接入或AAA。欲知更多信息,参考配置拨入客户端的基本的AAA RADIUS

先决条件

要求

本文档没有任何特定的要求。

使用的组件

本文档中的信息基于以下软件和硬件版本:

  • Cisco IOS�软件版本12.0(5.5)T

  • Cisco Secure UNIX版本2.2.3

  • Cisco接入服务器2511

本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始(默认)配置。如果您使用的是真实网络,请确保您已经了解所有命令的潜在影响。

规则

有关文档规则的详细信息,请参阅 Cisco 技术提示规则

配置

网络图

本文档使用此图所示的网络设置。

/image/gif/paws/13843/15a.gif

配置

本文档使用此处所示的配置。

Cisco Secure UNIX :RADIUS配置文件
# ./ViewProfile -p 9900 -u radtime

User Profile Information

user = radtime{
profile_id = 99
profile_cycle = 2
member = raj
radius=IETF {
check_items= {
2=cisco
}
reply_attributes= {
6=2
7=1
27=180
28=60
}
}
}

Cisco Secure ACS for Windows

完成这些步骤配置Windows的Cisco Secure通过空闲超时到NAS。

  1. 点击User Setup按钮在左柱状图。

  2. 去有问题的用户。

  3. 在IETF中RADIUS属性区分,选择服务类型(属性6) =Framed帧协议(从下拉菜单的属性7)=PPP

    注意: 您必须也单击在选定属性旁边查找的复选框:服务类型和帧协议。

  4. 单击左侧栏上的 Group Setup 按钮。选择用户所属的组并单击 Edit Settings

  5. 在互联网工程任务组(IETF) RADIUS属性的部分,请点击在属性27 Session-timeout和属性28 Idle-timeout旁边查找的复选框。在每个属性旁边指定每超时的所需的值(以秒钟)在方框。

路由器 A
Current configuration:
!
version 12.0
service timestamps debug datetime msec
service timestamps log uptime
no service password-encryption
!
hostname router_a
!
no logging console

!--- AAA configuration. The authorization statement is needed
!--- to pass timeout values from ACS to the NAS.

aaa new-model
aaa authentication ppp default if-needed group radius
aaa authorization network default group radius
username john password doe
enable password cisco
!
ip subnet-zero
no ip domain-lookup
!
cns event-service server
!
!
interface Ethernet0
ip address 171.68.201.53 255.255.255.0
no ip directed-broadcast
no ip route-cache
no ip mroute-cache
no cdp enable
!
interface Serial0
no ip address
no ip directed-broadcast
no ip mroute-cache
shutdown
no fair-queue
no cdp enable
!
interface Group-Async1
ip unnumbered Ethernet0
no ip directed-broadcast
encapsulation ppp
no ip route-cache
no ip mroute-cache
dialer in-band
async mode dedicated
peer default ip address pool default
no cdp enable
ppp authentication pap
group-range 1 16
!
ip local pool default 10.1.1.1
ip classless
ip route 0.0.0.0 0.0.0.0 171.68.201.1
ip route 171.68.0.0 255.255.0.0 171.68.201.1
!

!--- Specify the RADIUS server host and key.


radius-server host 171.68.171.9 auth-port 1645 acct-port 1646
radius-server key ontop
!
line con 0
exec-timeout 0 0
timeout login response 60
transport input pad v120 telnet rlogin udptn
line 1 16
autoselect during-login
autoselect ppp
modem InOut
transport input all
speed 115200
line aux 0
timeout login response 60
line vty 0 4
exec-timeout 0 0
timeout login response 5
password cisco
!
end

验证

本部分所提供的信息可用于确认您的配置是否正常工作。

命令输出解释程序工具仅限注册用户)支持某些 show 命令,使用此工具可以查看对 show 命令输出的分析。

  • show dialer interface async 1 —显示关于为按需拨号路由(DDR)拨号配置文件配置的接口的信息。

  • show interfaces async 1 —显示serial interfaces信息。

show命令输出展示如何验证会话和空闲超时正确地下载。思科建议您运行命令几次。这允许您观察计数器减少。

router#show dialer interface async 1     
Async1 - dialer type = IN-BAND ASYNC NO-PARITY

!--- Check to see that the idletime is 60 seconds for this interface.
!--- This was configured in the RADIUS server.

Idle timer (60 sec), Fast idle timer (20 secs)
Wait for carrier (30 secs), Re-enable (15 secs)
Dialer state is data link layer up
Time until disconnect 40 secs (radtime)

Dial String      Successes   Failures    Last DNIS   Last status

router#show interface async 1
Async1 is up, line protocol is up 
  Hardware is Async Serial
  Interface is unnumbered. Using address of Ethernet0 (171.68.201.53)
  MTU 1500 bytes, BW 115 Kbit, DLY 100000 usec, 
     reliability 253/255, txload 1/255, rxload 1/255
  Encapsulation PPP, loopback not set
  Keepalive not set
  DTR is pulsed for 5 seconds on reset

!--- The session (absolute) and idletime decreases.

Time to interface disconnect:  absolute 00:02:41, idle 00:00:36
  LCP Open
  Open: IPCP
  Last input 00:00:18, output 00:00:18, output hang never
  Last clearing of "show interface" counters 3w0d
  Input queue: 1/75/0 (size/max/drops); Total output drops: 0
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
     Conversations  0/1/16 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     3543 packets input, 155629 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     46 input errors, 46 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     1903 packets output, 44205 bytes, 0 underruns
     0 output errors, 0 collisions, 44 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions


router#show interface async 1
Async1 is up, line protocol is up 
  Hardware is Async Serial
  Interface is unnumbered. Using address of Ethernet0 (171.68.201.53)
  MTU 1500 bytes, BW 115 Kbit, DLY 100000 usec, 
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation PPP, loopback not set
  Keepalive not set
  DTR is pulsed for 5 seconds on reset

!--- The user is disconnected because the session 
!--- timeout (absolute) is reached.

Time to interface disconnect:  absolute 00:00:00, idle 00:00:56
  LCP Open
  Open: IPCP
  Last input 00:00:02, output 00:00:03, output hang never
  Last clearing of "show interface" counters 3w0d
  Input queue: 1/75/0 (size/max/drops); Total output drops: 0
  Queueing strategy: weighted fair
  Output queue: 0/1000/64/0 (size/max total/threshold/drops) 
     Conversations  0/1/16 (active/max active/max total)
     Reserved Conversations 0/0 (allocated/max allocated)
  5 minute input rate 0 bits/sec, 1 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     3674 packets input, 163005 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     46 input errors, 46 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     1984 packets output, 49146 bytes, 0 underruns
     0 output errors, 0 collisions, 44 interface resets
     0 output buffer failures, 0 output buffers swapped out
     0 carrier transitions

故障排除

本部分提供的信息可用于对配置进行故障排除。

故障排除命令

注意: 在发出 debug 命令之前,请参阅有关 Debug 命令的重要信息

  • debug ppp authentication —显示认证协议消息。这些消息包括质询验证协议(CHAP)信息包交换和密码认证协议交换。

  • debug ppp协商—显示在PPP启动期间传送的点对点协议(PPP)数据包, PPP选项协商。

  • debug aaa authorization —显示关于AAA/RADIUS授权的信息。

  • debug radius - 显示与 RADIUS 关联的详细调试信息。

路由器调试

此debug输出表示成功的连接。

*Mar 22 21:11:02.797: AAA: parse name=tty1 idb type=10 tty=1
*Mar 22 21:11:02.801: AAA: name=tty1 flags=0x11 type=4 shelf=0 
   slot=0 adapter=0 port=1 channel=0
*Mar 22 21:11:02.801: AAA/MEMORY: create_user (0x57F3A8) user='' ruser='' 
   port='tty1' rem_addr='async' authen_type=ASCII service=LOGIN priv=1
*Mar 22 21:11:02.833: AAA/MEMORY: free_user (0x57F3A8) user='' ruser='' 
   port='tty1' rem_addr='async' authen_type=ASCII service=LOGIN priv=1
*Mar 22 21:11:02.909: As1 IPCP: Install route to 10.1.1.1
*Mar 22 21:11:04.869: As1 LCP: I CONFREQ [Closed] id 0 len 23
*Mar 22 21:11:04.873: As1 LCP:    ACCM 0x00000000 (0x020600000000)
*Mar 22 21:11:04.877: As1 LCP:    MagicNumber 0x00005F22 (0x050600005F22)
*Mar 22 21:11:04.877: As1 LCP:    PFC (0x0702)
*Mar 22 21:11:04.881: As1 LCP:    ACFC (0x0802)
*Mar 22 21:11:04.881: As1 LCP:    Callback 6  (0x0D0306)
*Mar 22 21:11:04.885: As1 LCP: Lower layer not up, Fast Starting
*Mar 22 21:11:04.889: As1 PPP: Treating connection as a callin
*Mar 22 21:11:04.889: As1 PPP: Phase is ESTABLISHING, Passive Open
*Mar 22 21:11:04.893: As1 LCP: State is Listen
*Mar 22 21:11:04.897: As1 AAA/AUTHOR/FSM: (0): LCP succeeds trivially
*Mar 22 21:11:04.901: As1 LCP: O CONFREQ [Listen] id 104 len 24
*Mar 22 21:11:04.901: As1 LCP:    ACCM 0x000A0000 (0x0206000A0000)
*Mar 22 21:11:04.905: As1 LCP:    AuthProto PAP (0x0304C023)
*Mar 22 21:11:04.909: As1 LCP:    MagicNumber 0x812C7E0C (0x0506812C7E0C)
*Mar 22 21:11:04.913: As1 LCP:    PFC (0x0702)
*Mar 22 21:11:04.913: As1 LCP:    ACFC (0x0802)
*Mar 22 21:11:04.917: As1 LCP: O CONFREJ [Listen] id 0 len 7
*Mar 22 21:11:04.921: As1 LCP:    Callback 6  (0x0D0306)
3w0d: %LINK-3-UPDOWN: Interface Async1, changed state to up
*Mar 22 21:11:06.897: As1 LCP: TIMEout: State REQsent
*Mar 22 21:11:06.901: As1 LCP: O CONFREQ [REQsent] id 105 len 24
*Mar 22 21:11:06.901: As1 LCP:    ACCM 0x000A0000 (0x0206000A0000)
*Mar 22 21:11:06.905: As1 LCP:    AuthProto PAP (0x0304C023)
*Mar 22 21:11:06.909: As1 LCP:    MagicNumber 0x812C7E0C (0x0506812C7E0C)
*Mar 22 21:11:06.909: As1 LCP:    PFC (0x0702)
*Mar 22 21:11:06.913: As1 LCP:    ACFC (0x0802)
*Mar 22 21:11:07.045: As1 LCP: I CONFACK [REQsent] id 105 len 24
*Mar 22 21:11:07.049: As1 LCP:    ACCM 0x000A0000 (0x0206000A0000)
*Mar 22 21:11:07.053: As1 LCP:    AuthProto PAP (0x0304C023)
*Mar 22 21:11:07.057: As1 LCP:    MagicNumber 0x812C7E0C (0x0506812C7E0C)
*Mar 22 21:11:07.057: As1 LCP:    PFC (0x0702)
*Mar 22 21:11:07.061: As1 LCP:    ACFC (0x0802)
*Mar 22 21:11:07.821: As1 LCP: I CONFREQ [ACKrcvd] id 0 len 23
*Mar 22 21:11:07.825: As1 LCP:    ACCM 0x00000000 (0x020600000000)
*Mar 22 21:11:07.829: As1 LCP:    MagicNumber 0x00005F22 (0x050600005F22)
*Mar 22 21:11:07.829: As1 LCP:    PFC (0x0702)
*Mar 22 21:11:07.833: As1 LCP:    ACFC (0x0802)
*Mar 22 21:11:07.833: As1 LCP:    Callback 6  (0x0D0306)
*Mar 22 21:11:07.837: As1 LCP: O CONFREJ [ACKrcvd] id 0 len 7
*Mar 22 21:11:07.841: As1 LCP:    Callback 6  (0x0D0306)
*Mar 22 21:11:07.957: As1 LCP: I CONFREQ [ACKrcvd] id 1 len 20
*Mar 22 21:11:07.961: As1 LCP:    ACCM 0x00000000 (0x020600000000)
*Mar 22 21:11:07.961: As1 LCP:    MagicNumber 0x00005F22 (0x050600005F22)
*Mar 22 21:11:07.965: As1 LCP:    PFC (0x0702)
*Mar 22 21:11:07.969: As1 LCP:    ACFC (0x0802)
*Mar 22 21:11:07.969: As1 LCP: O CONFACK [ACKrcvd] id 1 len 20
*Mar 22 21:11:07.973: As1 LCP:    ACCM 0x00000000 (0x020600000000)
*Mar 22 21:11:07.977: As1 LCP:    MagicNumber 0x00005F22 (0x050600005F22)
*Mar 22 21:11:07.977: As1 LCP:    PFC (0x0702)
*Mar 22 21:11:07.981: As1 LCP:    ACFC (0x0802)
*Mar 22 21:11:07.985: As1 LCP: State is Open
*Mar 22 21:11:07.985: As1 PPP: Phase is AUTHENTICATING, by this end
*Mar 22 21:11:08.245: As1 LCP: I IDENTIFY [Open] id 2 len 18 magic 
   0x00005F22 MSRASV4.00
*Mar 22 21:11:08.249: As1 LCP: I IDENTIFY [Open] id 3 len 31 magic 
   0x00005F22 MSRAS-1-RAJESH-SECURITY
*Mar 22 21:11:08.253: As1 PAP: I AUTH-REQ id 30 len 18 from "radtime"
*Mar 22 21:11:08.265: As1 PAP: Authenticating peer radtime
*Mar 22 21:11:08.269: AAA: parse name=Async1 idb type=10 tty=1
*Mar 22 21:11:08.273: AAA: name=Async1 flags=0x11 type=4 shelf=0 slot=0 
   adapter=0 port=1 channel=0
*Mar 22 21:11:08.273: AAA/MEMORY: create_user (0x57F3A8) user='radtime' ruser='' 
   port='Async1' rem_addr='async' authen_type=PAP service=PPP priv=1
*Mar 22 21:11:08.281: RADIUS: ustruct sharecount=1
*Mar 22 21:11:08.285: RADIUS: Initial Transmit Async1 id 109 172.16.171.9:1645, 
   Access-Request, len 77
*Mar 22 21:11:08.289:         Attribute 4 6 AB44C935
*Mar 22 21:11:08.293:         Attribute 5 6 00000001
*Mar 22 21:11:08.293:         Attribute 61 6 00000000
*Mar 22 21:11:08.297:         Attribute 1 9 72616474
*Mar 22 21:11:08.297:         Attribute 2 18 486188E4
*Mar 22 21:11:08.301:         Attribute 6 6 00000002
*Mar 22 21:11:08.301:         Attribute 7 6 00000001
*Mar 22 21:11:08.329: RADIUS: Received from id 109 172.16.171.9:1645, 
   Access-Accept, len 44
*Mar 22 21:11:08.333:         Attribute 6 6 00000002
*Mar 22 21:11:08.333:         Attribute 7 6 00000001
*Mar 22 21:11:08.337:         Attribute 27 6 000000B4
*Mar 22 21:11:08.337:         Attribute 28 6 0000003C

属性值对(AVPs)从debug radius命令需要解码。这帮助您改善了解在NAS和RADIUS服务器之间的处理。

注意: 自Cisco IOS软件版本12.2(11)T,输出debug radius命令已经解码。它不要求使用Output Interpreter Tool (仅限注册用户)解码输出。参考的RADIUS调试增强欲知更多信息。

Output Interpreter Tool (仅限注册用户)允许您接收debug radius命令输出的分析。

输出以斜体字是从Output Interpreter Tool得到的结果(仅限注册用户) :

Access-Request 172.16.171.9:1645 id 109
Attribute Type 4:  NAS-IP-Address is 171.68.201.53
Attribute Type 5:  NAS-Port is 1
Attribute Type 61: NAS-Port-Type is Asynchronous
Attribute Type 1:  User-Name is radt
Attribute Type 2:  User-Password is (encoded)
Attribute Type 6:  Service-Type is Framed
Attribute Type 7:  Framed-Protocol is PPP
	Access-Accept 172.16.171.9:1645 id 109
Attribute Type 6:  Service-Type is Framed
Attribute Type 7:  Framed-Protocol is PPP
Attribute Type 27: Session-Timeout is 180 seconds
Attribute Type 28: Idle-Timeout is 60 seconds

注意会话超时是180秒,并且空闲超时是60秒。

*Mar 22 21:11:08.345: RADIUS: saved authorization data for user 57F3A8 at 5AB9A4
*Mar 22 21:11:08.349: As1 AAA/AUTHOR/LCP: Authorize LCP
*Mar 22 21:11:08.353: As1 AAA/AUTHOR/LCP (2107569326): Port='Async1' 
   list='' service=NET
*Mar 22 21:11:08.353: AAA/AUTHOR/LCP: As1 (2107569326) user='radtime'
*Mar 22 21:11:08.357: As1 AAA/AUTHOR/LCP (2107569326): send AV service=ppp
*Mar 22 21:11:08.357: As1 AAA/AUTHOR/LCP (2107569326): send AV protocol=lcp
*Mar 22 21:11:08.361: As1 AAA/AUTHOR/LCP (2107569326): found list "default"
*Mar 22 21:11:08.365: As1 AAA/AUTHOR/LCP (2107569326): Method=radius (radius)
*Mar 22 21:11:08.369: As1 AAA/AUTHOR (2107569326): Post authorization 
   status = PASS_REPL
*Mar 22 21:11:08.369: As1 AAA/AUTHOR/LCP: Processing AV service=ppp

!--- The session timeout and idle timeouts are applied to the interface.

*Mar 22 21:11:08.373: As1 AAA/AUTHOR/LCP: Processing AV timeout=180
*Mar 22 21:11:08.633: As1 AAA/AUTHOR/LCP: Processing AV idletime=60
*Mar 22 21:11:09.049: As1 PAP: O AUTH-ACK id 30 len 5
*Mar 22 21:11:09.053: As1 PPP: Phase is UP
*Mar 22 21:11:09.057: As1 AAA/AUTHOR/FSM: (0): Can we start IPCP?
*Mar 22 21:11:09.061: As1 AAA/AUTHOR/FSM (1853995855): Port='Async1' 
   list='' service=NET
*Mar 22 21:11:09.061: AAA/AUTHOR/FSM: As1 (1853995855) user='radtime'
*Mar 22 21:11:09.065: As1 AAA/AUTHOR/FSM (1853995855): send AV service=ppp
*Mar 22 21:11:09.065: As1 AAA/AUTHOR/FSM (1853995855): send AV protocol=ip
*Mar 22 21:11:09.069: As1 AAA/AUTHOR/FSM (1853995855): found list "default"
*Mar 22 21:11:09.073: As1 AAA/AUTHOR/FSM (1853995855): Method=radius (radius)
*Mar 22 21:11:09.077: As1 AAA/AUTHOR (1853995855): Post authorization 
   status = PASS_REPL
*Mar 22 21:11:09.077: As1 AAA/AUTHOR/FSM: We can start IPCP
*Mar 22 21:11:09.085: As1 IPCP: O CONFREQ [Closed] id 19 len 10
*Mar 22 21:11:09.089: As1 IPCP:    Address 171.68.201.53 (0x0306AB44C935)
*Mar 22 21:11:09.177: As1 CCP: I CONFREQ [Not negotiated] id 4 len 10
*Mar 22 21:11:09.181: As1 CCP:    MS-PPC supported bits 0x00000001 
   (0x120600000001)
*Mar 22 21:11:09.185: As1 LCP: O PROTREJ [Open] id 106 len 16 
   protocol CCP (0x80FD0104000A120600000001)
*Mar 22 21:11:09.189: As1 IPCP: I CONFREQ [REQsent] id 5 len 40
*Mar 22 21:11:09.193: As1 IPCP:    CompressType VJ 15 slots 
   CompressSlotID (0x0206002D0F01)
*Mar 22 21:11:09.197: As1 IPCP:    Address 0.0.0.0 (0x030600000000)
*Mar 22 21:11:09.201: As1 IPCP:    PrimaryDNS 0.0.0.0 (0x810600000000)
*Mar 22 21:11:09.205: As1 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
*Mar 22 21:11:09.209: As1 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
*Mar 22 21:11:09.213: As1 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
*Mar 22 21:11:09.213: As1 AAA/AUTHOR/IPCP: Start.  
   Her address 0.0.0.0, we want 10.1.1.1
*Mar 22 21:11:09.217: As1 AAA/AUTHOR/IPCP: Processing AV service=ppp
*Mar 22 21:11:09.221: As1 AAA/AUTHOR/IPCP: Authorization succeeded
*Mar 22 21:11:09.221: As1 AAA/AUTHOR/IPCP: Done.  
   Her address 0.0.0.0, we want 10.1.1.1
*Mar 22 21:11:09.229: As1 IPCP: O CONFREJ [REQsent] id 5 len 34
*Mar 22 21:11:09.229: As1 IPCP:    CompressType VJ 15 slots 
   CompressSlotID (0x0206002D0F01)
*Mar 22 21:11:09.233: As1 IPCP:    PrimaryDNS 0.0.0.0 (0x810600000000)
*Mar 22 21:11:09.237: As1 IPCP:    PrimaryWINS 0.0.0.0 (0x820600000000)
*Mar 22 21:11:09.241: As1 IPCP:    SecondaryDNS 0.0.0.0 (0x830600000000)
*Mar 22 21:11:09.245: As1 IPCP:    SecondaryWINS 0.0.0.0 (0x840600000000)
*Mar 22 21:11:09.249: As1 IPCP: I CONFACK [REQsent] id 19 len 10
*Mar 22 21:11:09.253: As1 IPCP:    Address 171.68.201.53 (0x0306AB44C935)
*Mar 22 21:11:09.673: As1 IPCP: I CONFREQ [ACKrcvd] id 6 len 10
*Mar 22 21:11:09.677: As1 IPCP:    Address 0.0.0.0 (0x030600000000)
*Mar 22 21:11:09.681: As1 AAA/AUTHOR/IPCP: Start.  
   Her address 0.0.0.0, we want 10.1.1.1
*Mar 22 21:11:09.685: As1 AAA/AUTHOR/IPCP: Processing AV service=ppp
*Mar 22 21:11:09.685: As1 AAA/AUTHOR/IPCP: Authorization succeeded
*Mar 22 21:11:09.689: As1 AAA/AUTHOR/IPCP: Done.  
   Her address 0.0.0.0, we want 10.1.1.1
*Mar 22 21:11:09.693: As1 IPCP: O CONFNAK [ACKrcvd] id 6 len 10
*Mar 22 21:11:09.697: As1 IPCP:    Address 10.1.1.1 (0x03060A010101)
*Mar 22 21:11:09.813: As1 IPCP: I CONFREQ [ACKrcvd] id 7 len 10
*Mar 22 21:11:09.817: As1 IPCP:    Address 10.1.1.1 (0x03060A010101)
*Mar 22 21:11:09.821: As1 AAA/AUTHOR/IPCP: Start.  
   Her address 10.1.1.1, we want 10.1.1.1
*Mar 22 21:11:09.825: As1 AAA/AUTHOR/IPCP (1344088998): Port='Async1' 
   list='' service=NET
*Mar 22 21:11:09.829: AAA/AUTHOR/IPCP: As1 (1344088998) user='radtime'
*Mar 22 21:11:09.833: As1 AAA/AUTHOR/IPCP (1344088998): send AV service=ppp
*Mar 22 21:11:09.833: As1 AAA/AUTHOR/IPCP (1344088998): send AV protocol=ip
*Mar 22 21:11:09.837: As1 AAA/AUTHOR/IPCP (1344088998): send AV addr*10.1.1.1
*Mar 22 21:11:09.837: As1 AAA/AUTHOR/IPCP (1344088998): found list "default"
*Mar 22 21:11:09.841: As1 AAA/AUTHOR/IPCP (1344088998): Method=radius (radius)
*Mar 22 21:11:09.845: As1 AAA/AUTHOR (1344088998): Post authorization 
   status = PASS_REPL
*Mar 22 21:11:09.849: As1 AAA/AUTHOR/IPCP: Reject 10.1.1.1, using 10.1.1.1
*Mar 22 21:11:09.853: As1 AAA/AUTHOR/IPCP: Processing AV service=ppp
*Mar 22 21:11:09.857: As1 AAA/AUTHOR/IPCP: Processing AV addr*10.1.1.1
*Mar 22 21:11:09.857: As1 AAA/AUTHOR/IPCP: Authorization succeeded
*Mar 22 21:11:09.861: As1 AAA/AUTHOR/IPCP: Done.  
   Her address 10.1.1.1, we want 10.1.1.1
*Mar 22 21:11:09.865: As1 IPCP: O CONFACK [ACKrcvd] id 7 len 10
*Mar 22 21:11:09.869: As1 IPCP:    Address 10.1.1.1 (0x03060A010101)
*Mar 22 21:11:09.873: As1 IPCP: State is Open
*Mar 22 21:11:09.885: As1 IPCP: Install route to 10.1.1.1
3w0d: %LINEPROTO-5-UPDOWN: Line protocol on Interface Async1, 
   changed state to up

相关的思科支持社区讨论

思科支持社区是您提问、解答问题、分享建议以及与工作伙伴协作的论坛。


相关信息


Document ID: 13843