????????? : Cisco IGX 8400 模块

IPX网络中继卡和IGX网络中继模块硬件错误汇总

2015 年 8 月 28 日 - 机器翻译
其他版本: PDFpdf | 英语 (2015 年 4 月 22 日) | 反馈


目录


简介

当异常情况出现时, Cisco广域网交换卡和模块记录错误代码。交换机卡错误表示给用户由在底部的一个“CD”符号的交换机命令行界面(CLI)屏幕。如果发出dspcderrors命令,错误列表显示。这些错误根据访问级别被提交。

此列表是IPX网络中继卡(NTC)硬件错误的一参考被提交至Stratacom级别。StrataCom级别错误只服务有意义。一些用户看不到列出的所有错误。

这些是在NTC能发生在IPX或在网络中继模块的硬件错误代码(NTM和NTM-B)在IGX,当您发出dspcderrs<slot>命令时。

先决条件

要求

本文档没有任何特定的要求。

使用的组件

本文档不限于特定的软件和硬件版本。

本文档中的信息都是基于特定实验室环境中的设备编写的。本文档中使用的所有设备最初均采用原始(默认)配置。如果您使用的是真实网络,请确保您已经了解所有命令的潜在影响。

规则

有关文档规则的详细信息,请参阅 Cisco 技术提示规则

硬件错误汇总

Solution ID : 1397
Description   : 22-Aug-96 FHA Updates added from NTM-B

N T C   H a r d w a r e   E r r o r   S u m m a r y (rev 0.1)

F  E  E  C  P  x  x  x  E
C  R  R  A  R  x  x  x  R
   R  R  R  O  x  x  x  R
            C  x  x  x
   F  T  T     x  x  x  N
   C  Y  Y     x  x  x  U
      P  P     x  x  x  M
      E  E

------------------------------------------------------------------------------
FC 00 01 02 03 04 05 06 07   01 - DOWNLOAD FAILURE ERROR TYPE MESSAGES
------------------------------------------------------------------------------
0B  X 01 96  X

------------------------------------------------------------------------------
FC 00 01 02 03 04 05 06 07   02 - POWER-UP FAILURE ERROR TYPE MESSAGES
------------------------------------------------------------------------------
0B  X 02 96 01  X  X  X  X   Boot PROM Failure (Ref. "CBUS Command Specs.").
0B  X 02 96 01  X  X  X 05   NVRAM checksum failed.
0B  X 02 96 01  X  X  X 06   FIFO  loopback failed.
0B  X 02 96 01  X  X  X 07   No state 0 message from supervisor.
0B  X 02 96 01  X  X  X 10   FIFO test failed.
0B  X 02 96 01  X  X  X 11   No state 1 message, EEprom checksum failure.
0B  X 02 96 01  X  X  X 12   Vector init  FIFO clear CIO init failed.
0B  X 02 96 01  X  X  X 13   PSOS-kernel initialization failed.
0B  X 02 96 01  X  X  X 14   Queue-Server  downloader failed.
0B  X 02 96 01  X  X  X 15   Queue-Manager downloader failed.
0B  X 02 96 01  X  X  X 16   Deframer downloader failed.
0B  X 02 96 01  X  X  X 17   Framer downloader failed.
0B  X 02 96 01  X  X  X 18   Queue-Server  DSP download failed.
0B  X 02 96 01  X  X  X 19   Queue-Manager DSP download failed.
0B  X 02 96 01  X  X  X 1A   Framer   DSP download failed.
0B  X 02 96 01  X  X  X 1B   Deframer DSP download failed.
0B  X 02 96 01  X  X  X 1C   PSOS-spawn task failure.
0B  X 02 96 01  X  X  X 1D   PSOS-event prcessor startup failure.
0B  X 02 96 01  X  X  X 1E   PSOS-framer task startup failure.
0B  X 02 96 01  X  X  X 1F   PSOS-deframer task startup failure.
0B  X 02 96 01  X  X  X 20   PSOS-queue-manager task startup failure.
0B  X 02 96 01  X  X  X 21   PSOS-queue-server task startup failure.
0B  X 02 96 01  X  X  X 22   PSOS-backcard task startup failure.
0B  X 02 96 01  X  X  X 23   PSOS-command server startup failure.
0B  X 02 96 01  X  X  X 24   Final init CIO interrupt-activation failed.

------------------------------------------------------------------------------
FC 00 01 02 03 04 05 06 07   03 - SELF-TEST FAILURE ERROR TYPE MESSAGES
------------------------------------------------------------------------------
0B  X 03 96 01  X  X  X 41   Admin ROM checksum failed.
0B  X 03 96 01  X  X  X 42   Admin RAM stuck-bit tests failed.
0B  X 03 96 01  X  X  X 43   Admin ROM & RAM failure.
0B  X 03 96 01  X  X  X 44   Admin Routing Table Modulus test failure.
0B  X 03 96 01  X  X  X 45   Admin Routing Table and ROM checksum tests failed.
0B  X 03 96 01  X  X  X 46   Admin Routing Table and RAM stuck-bit tests failed.
0B  X 03 96 01  X  X  X 47   Admin Routing Table, ROM & RAM failure.
0B  X 03 96 02  03 *         BIT0: program RAM checksum failed.
0B  X 03 96 02  03 *         BIT1: other DSP did not test shared RAM in time.
0B  X 03 96 02  03 *         BIT2: cannot get ownership of semaphore in time.
0B  X 03 96 02  03 *         BIT3: semaphore test data $AAAA $5555 incorrect.
0B  X 03 96 02 03  *         BIT4: location cannot be set to 0 in semaphore test.
0q  X 03 96 02 03  *         BIT5: attempt to disown not-owned semaphore.
0B  X 03 96 02 03  *         BIT6: slave not respond to 125usec interrupt at IRQA.
0B  X 03 96 02 03  X  *      BIT0: manager timed out waiting to test shared RAM.
0B  X 03 96 02 03  X  *      BIT1: shared X:RAM failed memory tests.
0B  X 03 96 02 03  X  *      BIT2: internal X:RAM failed memory tests.
0B  X 03 96 02 03  X  *      BIT3: internal Y:RAM failed memory tests.
0B  X 03 96 02 03  X  *      BIT4: unused P:RAM failed memory tests.
0B  X 03 96 02 03  X  *      BIT5: server timed out waiting for Framer interrupt(IRQB).
0B  X 03 96 02 03  X  *      BIT6: DPR memory test failed.
0B  X 03 96 02 03  X  X  *   BIT0: background checksum failed.
0B  X 03 96 02 03  X  X  *   BIT1: unused X:,P: RAM memory tests failed.
0B  X 03 96 02 03  X  X  *   BIT2: RAM constants failed.
0B  X 03 96 04  X  X  X 00   Framer code checksum failed.
0B  X 03 96 04  X  X  X 01   Framer internal X-RAM failure.
0B  X 03 96 04  X  X  X 02   Framer internal Y-RAM failure.
0B  X 03 96 04  X  X  X 03   Framer external Y-RAM failure.
0B  X 03 96 04  X  X  X 04   Framer queue buffer tests failed.
0B  X 03 96 04  X  X  X 05   Framer DPR memory failure.
0B  X 03 96 04  X  X  X 06   Framer interrupt test failure.
0B  X 03 96 05  X  X  X 00   Deframer code checksum failed.
0B  X 03 96 05  X  X  X 01   Deframer internal X-RAM failure.
0B  X 03 96 05  X  X  X 02   Deframer internal Y-RAM failure.
0B  X 03 96 05  X  X  X 03   Deframer external Y-RAM failure.
0B  X 03 96 05  X  X  X 04   Deframer MUXBUS FIFO tests failed .

------------------------------------------------------------------------------
FC 00 01 02 03 04 05 06 07   04 - MEMORY TEST FAILURE ERROR TYPE MESSAGES
------------------------------------------------------------------------------
0B  X 04 96  X

------------------------------------------------------------------------------
FC 00 01 02 03 04 05 06 07   05 - BOOT PROM FAILURE ERROR TYPE MESSAGES
------------------------------------------------------------------------------
0B  X 05 96 01 00 00 00 00   Waiting for HF flag change from DSP.
0B  X 05 96 01 00 00 00 01   Waiting for TXDE become TRUE from DSP.
0B  X 05 96 01 00 00 00 02   Waiting for RXDF become TRUE from DSP.
0B  X 05 96 01 00 00 00 03   Unable to initialize DSP.
0B  X 05 96 01 00 00 00 04   Unable to internal load the DSP.
0B  X 05 96 01 00 00 00 05   Unable to program EEPROM.
0B  X 05 96 01 00 00 00 06   Bad message from CBUS controller.
0B  X 05 96 01 00 00 00 07   FIFO 9th-bit format error from supervisor.
0B  X 05 96 01 00 00 00 08   No NMICLR in response to NMI to supervisor.
0B  X 05 96 01 00 00 00 09   Timeout waiting for space in Admin FIFO.

------------------------------------------------------------------------------
FC 00 01 02 03 04 05 06 07   06 - INTERNAL FAILURE ERROR TYPE MESSAGES
------------------------------------------------------------------------------
0B  X 06 96 01 09            NTC LCA error.
0B  X 06 96 01 0A            NTC missing back-card error.
0B  X 06 96 01 0B            NTC invalid back-card number.
0B  X 06 96 01 0C            NTC invalid back-card type.
0B  X 06 96 01 0D            NTC back-card buffer error.
0B  X 06 96 01 0E            NTC back-card not configured.
0B  X 06 96 01 10            ADMIN unexepected PSOS return code.
0B  X 06 96 01 12            ADMIN command length exceeds maximum.
0B  X 06 96 01 14            NTC FIFO 9th-bit error during command fetch.
0B  X 06 96 01 15            NTC fatal error - context unknown.
0B  X 06 96 01 20            ADMIN illegal message code between tasks.
0B  X 06 96 01 25            ADMIN event Tx timeout error.
0B  X 06 96 01 24 01         ADMIN Framer    I F task event fragment timeout.
0B  X 06 96 01 24 02         ADMIN Deframer  I F task event fragment timeout.
0B  X 06 96 01 24 04         ADMIN Q-manager I F task event fragment timeout.
0B  X 06 96 01 24 08         ADMIN Q-server  I F task event fragment timeout.
0B  X 06 96 01 24 10         ADMIN Back-card I F task event fragment timeout.
0B  X 06 96 01 21 02         Q-manager illegal message source(task ID).
0B  X 06 96 01 23 02         Q-manager mismatch unsolicited event fragment ID.
0B  X 06 96 01 26 02         Q-manager function code unknown to slave.
0B  X 06 96 01 31 02         Q-manager vector timeout error.
0B  X 06 96 01 32 02         Q-manager input (write) timeout.
0B  X 06 96 01 33 02         Q-manager output (read) timeout.
0B  X 06 96 01 34 02         Q-manager illegal function code.
0B  X 06 96 01 35 02         Q-manager illegal argument.
0B  X 06 96 01 21 03         Q-server illegal message source(task ID).
0B  X 06 96 01 23 03         Q-server mismatch unsolicited event fragment ID.
0B  X 06 96 01 26 03         Q-server function code unknown to slave.
0B  X 06 96 01 31 03         Q-server vector timeout error.
0B  X 06 96 01 32 03         Q-server input (write) timeout.
0B  X 06 96 01 33 03         Q-server output (read) timeout.
0B  X 06 96 01 34 03         Q-server illegal function code.
0B  X 06 96 01 35 03         Q-server illegal argument.
0B  X 06 96 01 21 04         Framer illegal message source(task ID).
0B  X 06 96 01 21 05      Deframer illegal message source(task ID).
0B  X 06 96 01 23 02      Q-manager mismatch/unsolicited event fragment ID.
0B  X 06 96 01 23 03      Q-server mismatch/unsolicited event fragment ID.
0B  X 06 96 01 23 04      Framer mismatch/unsolicited event fragment ID.
0B  X 06 96 01 23 05      Deframer mismatch/unsolicited event fragment ID.
0B  X 06 96 01 24 01      ADMIN/Framer    I/F task event fragment timeout.
0B  X 06 96 01 24 02      ADMIN/Deframer  I/F task event fragment timeout.
0B  X 06 96 01 24 04      ADMIN/Q-manager I/F task event fragment timeout.
0B  X 06 96 01 24 08      ADMIN/Q-server  I/F task event fragment timeout.
0B  X 06 96 01 24 10      ADMIN/Back-card I/F task event fragment timeout.
0B  X 06 96 01 25         ADMIN event Tx timeout error.
0B  X 06 96 01 26 02      Q-manager function code unknown to slave.
0B  X 06 96 01 26 03      Q-server function code unknown to slave.
0B  X 06 96 01 26 04      Framer function code unknown to slave.
0B  X 06 96 01 26 05      Deframer function code unknown to slave.
0B  X 06 96 01 30 02      Q-manager timeout error.
0B  X 06 96 01 30 03      Q-server timeout error.
0B  X 06 96 01 30 04      Framer timeout error.
0B  X 06 96 01 30 05      Deframer timeout error.
0B  X 06 96 01 31 02      Q-manager vector timeout error.
0B  X 06 96 01 31 03      Q-server vector timeout error.
0B  X 06 96 01 31 04      Framer vector timeout error.
0B  X 06 96 01 31 05      Deframer vector timeout error.
0B  X 06 96 01 32 02      Q-manager input (write) timeout.
0B  X 06 96 01 32 03      Q-server input (write) timeout.
0B  X 06 96 01 32 04      Framer input (write) timeout.
0B  X 06 96 01 32 05      Deframer input (write) timeout.
0B  X 06 96 01 33 02      Q-manager output (read) timeout.
0B  X 06 96 01 33 03      Q-server output (read) timeout.
0B  X 06 96 01 33 04      Framer output (read) timeout.
0B  X 06 96 01 33 05      Deframer output (read) timeout.
0B  X 06 96 01 34 02      Q-manager illegal function code.
0B  X 06 96 01 34 03      Q-server illegal function code.
0B  X 06 96 01 34 04      Framer illegal function code.
0B  X 06 96 01 34 05      Deframer illegal function code.
0B  X 06 96 01 35 02      Q-manager illegal argument.
0B  X 06 96 01 35 03      Q-server illegal argument.
0B  X 06 96 01 35 04      Framer illegal argument.
0B  X 06 96 01 35 05      Deframer illegal argument.

0B  X 06 96 01 41         ADMIN ROM failure.
0B  X 06 96 01 42         ADMIN RAM failure.
0B  X 06 96 01 43         ADMIN ROM/RAM failure.
0B  X 06 96 01 44         ADMIN routing table modulus test failure.

0B  X 06 96 02 01      Q-magr function set_bmp detected 1 instead of 0.
0B  X 06 96 02 02      Q-magr function rcy_eba/last_eba points to non-zero location.
0B  X 06 96 02 03      Q-magr function m_active found PIFIFO reset.
0B  X 06 96 02 04      Q-magr function m_active found server inactive.
0B  X 06 96 02 05      Q-magr function m_time found server inactive.
0B  X 06 96 02 06      Q-magr function rx_pkt found an zero EBA in PIFIFO.
0B  X 06 96 02 07      Q-magr function rx_pkt found an EBA with non-zero ls-nibble in PIFIFO.
0B  X 06 96 02 08      Q-magr function m_time detected no server response to last interrupt.
0B  X 06 96 02 09      Q-magr function rcy_eba was passed a zero EBA.
0B  X 06 96 02 0A      Q-magr GCI received by rx_pkt is either 0 or $FF
0B  X 06 96 02 10      Q-magr disowned resource was not owned.
0B  X 06 96 02 11      Q-magr stack error.
0B  X 06 96 02 12      Q-magr manager received unused IRQB interrupt.
0B  X 06 96 02 13      Q-magr received unused SSI interrupt.
0B  X 06 96 02 14      Q-magr received unused HOST vector or default.
0B  X 06 96 02 15      Q-magr illegal instruction detected.
0B  X 06 96 02 16      Q-magr resource ownership request timeout.
0B  X 06 96 02 17      Q-magr background checksum failed
0B  X 06 96 02 18      Q-magr slave never received frame interrupt while activating.
0B  X 06 96 02 19      Q-magr other processor did not receive frame interrupt during activation.
0B  X 06 96 02 1A      Q-magr power-up selftest failed.
0B  X 06 96 02 30      Q-magr unknown host command.
0B  X 06 96 02 31      Q-magr illegal parameter value in host command.
0B  X 06 96 02 32      Q-magr illegal host command for current DSP state.
0B  X 06 96 02 33      Q-magr host command configuration.
0B  X 06 96 03 01      Q-srvr function s_active found the EBA FIFO reset.
0B  X 06 96 03 02      Q-srvr function clr_bmp detected 0 instead of 1.
0B  X 06 96 03 03      Q-srvr deactivated while manager still active
0B  X 06 96 03 04      Q-srvr function s_active detected non-empty EBA FIFO while activating.
0B  X 06 96 03 05      Q-srvr manager no s_time signal to frame interrupt handler.
0B  X 06 96 03 06      Q-srvr macro fill_eba out of EBAs in functions s_time or s_active.
0B  X 06 96 03 07      Q-srvr time-out in function s_active, awaiting manager activation.
0B  X 06 96 03 08      Q-srvr function s_rcyeba was passed a zero EBA.
0B  X 06 96 03 09      Q-srvr xd subqueue search decremented <= 0 (serve_xd)
0B  X 06 96 03 0A      Q-srvr subqueue depth is decremented < 0 (serve_xd)
0B  X 06 96 03 0B      Q-srvr serve is serving a illegal credited queue
0B  X 06 96 03 0C      Q-srvr serve is serving a illegal rnd robin queue
0B  X 06 96 03 0D      Q-srvr serve SCB list ends and no queue is present
0B  X 06 96 03 0E      Q-srvr xd subqueue search decremented <= 0 (age_xd)
0B  X 06 96 03 0F      Q-srvr age_xd cannot find pkts in subqueue
0B  X 06 96 03 10      Q-srvr disowned not-owned resource.
0B  X 06 96 03 11      Q-srvr stack error.
0B  X 06 96 03 12      Q-srvr manager received unused IRQB interrupt.
0B  X 06 96 03 13      Q-srvr received unused SSI interrupt.
0B  X 06 96 03 14      Q-srvr received unused HOST vector or default.
0B  X 06 96 03 15      Q-srvr illegal instruction detected.
0B  X 06 96 03 16      Q-srvr resource ownership request timeout.
0B  X 06 96 03 17      Q-srvr background checksum failed
0B  X 06 96 03 18      Q-srvr slave never received frame interrupt while activating.
0B  X 06 96 03 19      Q-srvr other processor did not receive frame interrupt during activation.
0B  X 06 96 03 1A      Q-srvr power-up selftest failed.
0B  X 06 96 03 30      Q-srvr unknown host command.
0B  X 06 96 03 31      Q-srvr illegal parameter value in host command.
0B  X 06 96 03 32      Q-srvr illegal host command for current DSP state.
0B  X 06 96 03 33      Q-srvr host command configuration.
0B  X 06 96 03 50      Q-srvr serve_xd PIB_ptr = 0
0B  X 06 96 03 51      Q-srvr serve_v  PIB_ptr = 0
0B  X 06 96 03 52      Q-srvr serve_ts PIB_ptr = 0
0B  X 06 96 03 53      Q-srvr serv_nts PIB_ptr = 0
0B  X 06 96 03 54      Q-srvr serve_hp PIB_ptr = 0
0B  X 06 96 03 55      Q-srvr drp_ovp  PIB_ptr = 0
0B  X 06 96 03 56      Q-srvr drp_otsp PIB_ptr = 0
0B  X 06 96 03 57      Q-srvr drop_xd  PIB_ptr = 0
0B  X 06 96 04 01      Framer stack error.
0B  X 06 96 04 02      Framer illegal intruction error.
0B  X 06 96 04 03      Framer illegal exception error.
0B  X 06 96 04 04      Framer power-up test failure.
0B  X 06 96 04 05      Framer background checksum failure.
0B  X 06 96 04 06      Framer zero header packet pulled from queue buffer.
0B  X 06 96 04 07      Framer zero EBA read from Q server.
0B  X 06 96 04 10      Framer unknown function code from host.
0B  X 06 96 04 11      Framer illegal number of arguments in host command.
0B  X 06 96 04 12      Framer illegal parameter in host command.
0B  X 06 96 04 14      Framer illegal host command for DSP state.
0B  X 06 96 04 16      Framer configuration error.
0B  X 06 96 05 01      Deframer stack error.
0B  X 06 96 05 02      Deframer illegal intruction error.
0B  X 06 96 05 03      Deframer illegal exception error.
0B  X 06 96 05 04      Deframer power-up test failure.
0B  X 06 96 05 05      Deframer background checksum failure.
0B  X 06 96 05 06      Deframer zero header packet pulled from queue buffer.
0B  X 06 96 05 07      Deframer zero EBA read from Q-server.
0B  X 06 96 05 10      Deframer unknown function code from host.
0B  X 06 96 05 11      Deframer illegal number of arguments in host command.
0B  X 06 96 05 12      Deframer illegal parameter in host command.
0B  X 06 96 05 14      Deframer illegal host command for DSP state.
0B  X 06 96 05 16      Deframer coniguration error.


------------------------------------------------------------------------------
FC 00 01 02 03 04 05 06 07   07 - WATCHDOG FAILURE ERROR TYPE MESSAGES
------------------------------------------------------------------------------
0B  X 07 96 01 aa bb         Admin watchdog error.
                             aa = time since last Cbus poll, (x 32ms)
                             bb = time since last ADMIN watchdog, (x 32ms)
0B  X 07 96 02               Queue-manager watchdog error.
0B  X 07 96 03               Queue-server watchdog error.
0B  X 07 96 04               Framer watchdog error.
0B  X 07 96 05               Deframer watchdog error.
Part Number :   OLD_01
Part Name :     IPX HW PCC Model D
Part Number :   207390-20
Part Name :     IPX HW NTC Model E

卡错误示例

此示例显示NTM的OB卡错误在slot 5 :

使用dspcderrs命令
IGX    StrataCom  IGX16  9.1.xx  Feb. 11 2000 10:37 EDT 

NTM in Slot 5 : 427891 Rev FHH
-----------------------------------
Failure Type: Hardware Error
Failure Time: Feb. 11 2000 10:02:54 EDT

Hardware Error Event:
0B FD 06 96 01 24 02

Error Fcode: FD
Failure Type: Internal
Processor Number: 01



This Command: dspcderrs 5

这是“ADMIN Deframer我F任务事件片段timeout"-0B x 06 96 01 24 02。

相关的思科支持社区讨论

思科支持社区是您提问、解答问题、分享建议以及与工作伙伴协作的论坛。


相关信息


Document ID: 10801